Segmented Control of Selenization Environment for High-Quality Cu2ZnSn(S,Se)4 Films Toward Efficient Kesterite Solar Cells.

High-crystalline-quality absorbers with fewer defects are crucial for further improvement of open-circuit voltage (VOC) and efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. However, the preparation of high-quality CZTSSe absorbers remains challenging due to the uncontrollability of the selenization reaction and the complexity of the required selenization environment for film growth. Herein, a novel segmented control strategy for the selenization environment, specifically targeting the evaporation area of Se, to regulate the selenization reactions and improve the absorber quality is proposed. The large evaporation area of Se in the initial stage of the selenization provides a great evaporation and diffusion flux for Se, which facilitates rapid phase transition reactions and enables the attainment of a single-layer thin film. The reduced evaporation area of Se in the later stage creates a soft-selenization environment for grain growth, effectively suppressing the loss of Sn and promoting element homogenization. Consequently, the mitigation of Sn-related deep-level defects on the surface and in the bulk induced by element imbalance is simultaneously achieved. This leads to a significant improvement in nonradiative recombination suppression and carrier collection enhancement, thereby enhancing the VOC. As a result, the CZTSSe device delivers an impressive efficiency of 13.77% with a low VOC deficit.

A novel design of copper selenide/zinc selenide/Nitrogen-doped carbon derived from MOF for sulfadiazine adsorption: Performance and mechanism.

Herein, a novel copper selenide/zinc selenide/Nitrogen-doped carbon (Cu2Se/ZnSe/NC) sphere was constructed via a combination of cation exchange, selenization and carbonization approaches with zinc-based metal-organic frameworks (ZIF-8) as precursor for sulfadiazine (SDZ) removal. Compared with the ZnSe/NC, the defective Cu2Se/ZnSe interface in the optimizing Cu-ZnSe/NC2 sample caused a remarkably improved adsorption performance. Notably, the adsorption capacity of 129.32 mg/g was better than that of mostly reported adsorbents for SDZ. And the adsorption referred to multiple-layer physical-chemical process that was spontaneous and exothermic. Besides, the Cu-ZnSe/NC2 displayed fast adsorption equilibrium of about 20 min and significant anti-interference ability for inorganic ions. Specially, the adsorbent possessed excellent stability and reusability, which could also be applied for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) dyes removal. Ultimately, the charge redistribution of Cu2Se/ZnSe interface greatly contributes the superior adsorption performance for SDZ, in which electrostatic attraction occupied extremely crucial status as compared to π-π electron-donor-acceptor (π-π EDA) interaction and hydrogen bonding (H-bonding), as revealed by the density function theory (DFT) calculations and experimental results. This study can provide a guideline for design of high-efficient adsorbent with interfacial charge redistribution.

Double Perovskite Single Crystals with High Laser Irradiation Stability for Solid-State Laser Lighting and Anti-counterfeiting.

Laser lighting devices, comprising an ultraviolet (UV) laser chip and a phosphor material, have emerged as a highly efficient approach for generating high-brightness light sources. However, the high power density of laser excitation may exacerbate thermal quenching in conventional polycrystalline or amorphous phosphors, leading to luminous saturation and the eventual failure of the device. Here, for the first time, we raise a single-crystal (SCs) material for laser lighting considering the absence of grain boundaries that scatter electrons and phonons, achieving high thermal conductivity (0.81 W m-1 K-1) and heat-resistance (575 °C). The SCs products exhibit a high photoluminescence quantum yield (89%) as well as excellent stability toward high-power lasers (>12.41 kW/cm2), superior to all previously reported amorphous or polycrystalline matrices. Finally, the laser lighting device was fabricated by assembling the SC with a UV laser chip (50 mW), and the device can maintain its performance even after continuous operation for 4 h. Double perovskite single crystals doped with Yb3+/Er3+ demonstrated multimodal luminescence with the irradiation of 355 and 980 nm lasers, respectively. This characteristic holds significant promise for applications in spectrally tunable laser lighting and multimodal anticounterfeiting.

Cost, market, and policy constraints on mitigating climate change through afforestation in China.

Afforestation is a promising nature-based climate solution for mitigating climate change, but it is subject to a complex web of biophysical, cost-benefit, market, and policy processes. Although its biophysical feasibility has been established, the cost, market, and policy constraints that affect climate change mitigation through afforestation are still unclear. Here, we estimate such cost, market, and policy constraints on the basis of biophysical feasibility. Our findings reveal that implementation costs are a more relevant constraint than opportunity costs on mitigating climate change through afforestation. The China Certified Emission Reduction market currently provides only a 0.308 % incentive for climate change mitigation through afforestation, due to market access constraints. The current market prices of China Certified Emission Reduction, China Carbon Emissions Trading Exchange, and Nature Based Carbon Offset in Voluntary Carbon Market constrain 88.15 %, 87.95 %, and 85.75 % of CO2 removal actions through afforestation, compared to the carbon price scenario (US$62.97 tCO2-1) of the EU Emissions Trading System. Moreover, land policy under the scenarios of prohibiting conversion of cultivated land to forest and forest restoration in degraded areas exhibit 8.87-29.59 % and 65.16-74.10 % constraints, respectively, on mitigating climate change through afforestation compared to land-use freedom conversion scenarios from 2020 to 2060. Thus, enhancing the incentive price of CO2 removal, addressing the market access barrier, strengthening cooperation between global carbon markets, and exploring carbon-neutral and food multi-oriented land policies can be valuable sources of mitigation efforts over the next 40 years.

Spray-Printed Flexible Li2S Cathode with Inorganic Ion-Conductive Binder Nano-Li3PS4.

Flexible solid-state batteries fabricated by printing techniques are promising integrated power supplies for miniaturized and customized electronic devices. While typically these batteries use polymer solid electrolytes, a flexible Li2S cathode with sulfide solid electrolyte is spray-printed in this work, by using solvated Li3PS4 nanoparticles as inorganic ion-conductive binder. This benefits from a novel low-temperature-sintering property of these nanoparticles, which can be pressure-free densified, along with the desolvation process, and thus bind the cathode at 250 °C. The battery can be stably charged and discharged for 300 cycles with no stacking pressure, and the capacity maintains at 840 mA h gLi2 S-1. We believe this low-temperature-sintering phenomenon of solid electrolyte nanoparticles will open a new path toward the application of sulfide solid electrolytes in printed solid-state batteries.

Efficacy and safety of a panthenol-enriched mask for individuals with distinct impaired skin barrier subtypes.

BACKGROUND: The protection for different skin types with impaired skin barrier in the market is insufficient. AIM: To evaluate the efficacy and safety of a panthenol-enriched mask (La Roche-Posay Mask Pro) in addressing various skin barrier impairment subgroups, including dry sensitive, oily sensitive, and oily acne skin. METHODS: A total of 177 participants were enrolled in the study and divided into three subgroups based on their skin type. Participants used the mask following the specified protocol, with measurements taken for skin hydration, transepidermal water loss (TEWL), sebum content, and skin redness-factors that are directly influenced by skin barrier function. Assessments were conducted at baseline and after 1 day (tested 15 min post-application), 7 days, and 14 days of application using Sebumeter, Tewameter, Corneometer, Mexameter, and VISIA. RESULTS: Results showed significant improvements in skin parameters across all subgroups. In the dry sensitive skin subgroup, the mask increased skin hydration, sebum content, and reduced redness. For the oily sensitive skin subgroup, the mask regulated sebum production and improved skin hydration. In the oily acne skin subgroup, the mask reduced sebum content, redness, TEWL, and post-inflammatory erythema and hyperpigmentation. Tolerance was excellent for all skin types, with no adverse reactions observed. CONCLUSIONS: This study highlights the efficacy and safety of the panthenol-enriched LRP Mask Pro for individuals with distinct skin barrier impairment subgroups. The mask's versatile formulation and proven efficacy make it a valuable skincare product for addressing various skin concerns and achieving healthier, more balanced skin.

Efficacy of a moisturizing cream and facial mask for alleviating skin problems associated with medical mask use: A half-face, randomized controlled study.

BACKGROUND: Prolonged use of medical masks has increased skin-related issues. AIM: To evaluate the efficacy of a facial cream and facial mask in mitigating medical mask related skin symptoms. METHODS: Healthy women were randomly assigned to apply a facial cream (n = 32) or a facial mask plus a facial cream (n = 32) on half-faces after wearing medical masks for 4 h (Tb). Transepidermal water loss (TEWL), dryness score, and redness area were assessed at Tb and 10 min after using the cream (T1) in the facial cream group, and at Tb, 1 h after using the facial mask (T2), and 10 min after using the cream (T3) in the combined use group. RESULTS: In the facial cream group, the treated half-face showed significantly better improvements from Tb to T1 in TEWL (-2.95 ± 0.38 vs. -0.68 ± 0.35 g/h·cm2, p < 0.001) and skin dryness score (-1.00 ± 0.12 vs. 0.00 ± 0.00, p < 0.001). In the combined use group, the treated half-face showed significantly better improvements from Tb to T2 and T3 in TEWL (T2, -3.46 ± 0.33 vs. -0.09 ± 0.13 g/h·cm2; T3, -4.67 ± 0.31 vs. -0.28 ± 0.22 g/h·cm2) and skin dryness score (T2, -0.63 ± 0.13 vs. 0.03 ± 0.03; T3, -0.94 ± 0.17 vs. 0.19 ± 0.07) (all p < 0.001) then the untreated half-face. The combined use group had significantly lower TEWL at T3 than T2 (p < 0.05). The reduction in redness area was similar between the treated and untreated half-faces in both groups. CONCLUSIONS: The test facial cream and mask significantly improved skin barrier function and alleviated dryness symptoms associated with medical mask use, with the combined use offering superior benefits.

Evaluation of the efficacy of a sunscreen containing ultra-long UVA1 and other UVR broad-spectrum filters on skin barrier protection and melanin content reduction in Chinese adults: A single-center study.

Background and Aims: The protection for ultra-long UVA1 is lacked in the market, posing potential damage from ultra-long UVA1 irradiation. The study aims to evaluate the efficacy of a sunscreen containing multiple components, especially Mexoryl® 400 for improving skin barrier function and reducing melanin content. Methods: This single-center study included adults with sensitive and normal skin in China in November 2022. Participants received the test sunscreen for 4 weeks. Melanin and hemoglobin content, sebum secretion skin hydration, and trans-epidermal water loss were evaluated at T0d, T7d, and T28d. The self-assessment was done at T15min, T7d, and T28d. Results: Sixty participants were included, including 30 self-claimed sensitive skin in the sunscreen group. The sunscreen demonstrated significant improvements in skin parameters. Skin redness reduced by 9.84% at T28d, sebum content in the forehead area decreased by 22.70% at T28d, and skin stratum corneum hydration increased by 38.44% at T28d, p < 0.001 respectively. Most notably, skin melanin content significantly reduced by 13.49% after 4 weeks' usage (p < 0.001). No adverse reactions were reported in either group. Conclusions: The study sunscreen improved the skin condition by decreasing the melanin content, regulating skin barrier function, and achieving a balance of skin hydration and sebum secretion.

Stereo-Hindrance Engineering of A Cation toward <110>-Oriented 2D Perovskite with Minimized Tilting and High-Performance X-Ray Detection.

2D <100>-oriented Dion-Jacobson or Ruddlesden-Popper perovskites are widely recognized as promising candidates for optoelectronic applications. However, the large interlayer spacing significantly hinders the carrier transport. <110>-oriented 2D perovskites naturally exhibit reduced interlayer spacings, but the tilting of metal halide octahedra is typically serious and leads to poor charge transport. Herein, a <110>-oriented 2D perovskite EPZPbBr4 (EPZ = 1-ethylpiperazine) with minimized tilting is designed through A-site stereo-hindrance engineering. The piperazine functional group enters the space enclosed by the three [PbBr6 ]4- octahedra, pushing Pb─Br─Pb closer to a straight line (maximum Pb─Br─Pb angle ≈180°), suppressing the tilting as well as electron-phonon coupling. Meanwhile, the ethyl group is located between layers and contributes an extremely reduced effective interlayer distance (2.22 Å), further facilitating the carrier transport. As a result, EPZPbBr4 simultaneously demonstrates high µτ product (1.8 × 10-3 cm2 V-1 ) and large resistivity (2.17 × 1010 Ω cm). The assembled X-ray detector achieves low dark current of 1.02 × 10-10 A cm-2 and high sensitivity of 1240 µC Gy-1 cm-2 under the same bias voltage. The realized specific detectivity (ratio of sensitivity to noise current density, 1.23 × 108 µC Gy-1 cm-1 A-1/2 ) is the highest among all reported perovskite X-ray detectors.

Flexible power generators by Ag2Se thin films with record-high thermoelectric performance.

Exploring new near-room-temperature thermoelectric materials is significant for replacing current high-cost Bi2Te3. This study highlights the potential of Ag2Se for wearable thermoelectric electronics, addressing the trade-off between performance and flexibility. A record-high ZT of 1.27 at 363 K is achieved in Ag2Se-based thin films with 3.2 at.% Te doping on Se sites, realized by a new concept of doping-induced orientation engineering. We reveal that Te-doping enhances film uniformity and (00l)-orientation and in turn carrier mobility by reducing the (00l) formation energy, confirmed by solid computational and experimental evidence. The doping simultaneously widens the bandgap, resulting in improved Seebeck coefficients and high power factors, and introduces TeSe point defects to effectively reduce the lattice thermal conductivity. A protective organic-polymer-based composite layer enhances film flexibility, and a rationally designed flexible thermoelectric device achieves an output power density of 1.5 mW cm-2 for wearable power generation under a 20 K temperature difference.

Efficacy and safety of a cream containing panthenol, prebiotics, and probiotic lysate for improving sensitive skin symptoms.

BACKGROUND: Sensitive skin is a common condition affecting a significant proportion of the population, and there is a growing demand for effective and safe management. AIM: To evaluate the efficacy and safety of a cream containing panthenol, prebiotics, and probiotic lysate as an optimal care for facial sensitive skin. METHODS: A total of 110 participants (64 in group A and 46 in group B) with facial sensitive skin applied the cream twice daily for 28 days. Group A evaluated their sensitive skin, product efficacy, and product use experience at D0 (15 min), D1, D14, and D28. In group B, skin barrier function-related indicators were measured at baseline and on D1, D7, D14, and D28. Dermatologists evaluated tolerance for all participants. RESULTS: After 28 days of use, in group A, 100% of participants reported mildness and comfort with product use. Participants demonstrated significant improvements in skin barrier function-related indicators, including increased stratum corneum moisture content, reduced erythema index, elevated sebum content, decreased trans-epidermal water loss, and diminished skin redness parameter a* value (all p < 0.05). Dermatologist evaluations revealed excellent tolerance among all participants. CONCLUSION: The panthenol-enriched cream with prebiotics and probiotic lysate exhibited substantial clinical efficacy in ameliorating facial sensitive skin conditions, coupled with a high safety profile.

Inorganic All-Solid-State Sodium Batteries: Electrolyte Designing and Interface Engineering.

Inorganic all-solid-state sodium batteries (IASSSBs) are emerged as promising candidates to replace commercial lithium-ion batteries in large-scale energy storage systems due to their potential advantages, such as abundant raw materials, robust safety, low price, high-energy density, favorable reliability and stability. Inorganic sodium solid electrolytes (ISSEs) are an indispensable component of IASSSBs, gaining significant attention. Herein, this review begins by discussing the fundamentals of ISSEs, including their ionic conductivity, mechanical property, chemical and electrochemical stabilities. It then presents the crystal structures of advanced ISSEs (e.g., ß/ß''-alumina, NASICON, sulfides, complex hydride and halide electrolytes) and the related issues, along with corresponding modification strategies. The review also outlines effective approaches for forming intimate interfaces between ISSEs and working electrodes. Finally, current challenges and critical perspectives for the potential developments and possible directions to improve interfacial contacts for future practical applications of ISSEs are highlighted. This comprehensive review aims to advance the understanding and development of next-generation rechargeable IASSSBs.

Electron Transport Layer Engineering Induced Carrier Dynamics Optimization for Efficient Cd-Free Sb2 Se3 Thin-Film Solar Cells.

Antimony selenide (Sb2 Se3 ) is a highly promising photovoltaic material thanks to its outstanding optoelectronic properties, as well as its cost-effective and eco-friendly merits. However, toxic CdS is widely used as an electron transport layer (ETL) in efficient Sb2 Se3 solar cells, which largely limit their development toward market commercialization. Herein, an effective green Cd-free ETL of SnOx is introduced and deposited by atomic layer deposition method. Additionally, an important post-annealing treatment is designed to further optimize the functional layers and the heterojunction interface properties. Such engineering strategy can optimize SnOx ETL with higher nano-crystallinity, higher carrier density, and less defect groups, modify Sb2 Se3 /SnOx heterojunction with better interface performance and much desirable "spike-like" band alignment, and also improve the Sb2 Se3 light absorber layer quality with passivated bulk defects and prolonged carrier lifetime, and therefore to enhance carrier separation and transport while suppressing non-radiative recombination. Finally, the as-fabricated Cd-free Mo/Sb2 Se3 /SnOx /ITO/Ag thin-film solar cell exhibits a stimulating efficiency of 7.39%, contributing a record value for Cd-free substrate structured Sb2 Se3 solar cells reported to date. This work provides a viable strategy for developing and broadening practical applications of environmental-friendly Sb2 Se3 photovoltaic devices.

Efficacy of ceramide-containing sunscreen on skin barrier.

BACKGROUND: UV rays not only cause oxidative damage to the skin, but also damage its barrier function. The use of sunscreen is crucial in preventing skin from UV radiation, but it may have an impact on the function of the skin barrier. While much research has focused on the protective effects of sunscreen against UV oxidative damage, little is known about the impact of daily sunscreen use on the skin barrier. OBJECTIVE: This study mainly investigated the changes in skin barrier function of volunteers (including those with sensitive skin) before and after using a ceramide-containing sunscreen. METHODS: A total of 60 volunteers used SPF30 sunscreen containing ceramide every morning. Using non-invasive methods to detect skin barrier changes in TEWL, hydration, facial redness based on VISIA-CR image, and Erythema index (EI) value after 4 weeks of using ceramide-containing sunscreen. Adverse reactions were also assessed. RESULTS: After 4 weeks of using ceramide-containing sunscreen, significant reductions were observed in skin redness with both an 11.89% decrease in a* value and a 5.68% decrease in skin EI, while there was also a significant decrease in transepidermal water loss (TEWL) with a reduction of 22.96%, and a significant increase in skin hydration with a 21.96% increase in the moisture content of the stratum corneum. No adverse events occurred during the entire testing process. CONCLUSION: Daily application of ceramide-containing sunscreen can increase skin hydration while enhancing the function of the skin barrier.

Suppressing Buried Interface Nonradiative Recombination Losses Toward High-Efficiency Antimony Triselenide Solar Cells.

Antimony triselenide (Sb2 Se3 ) has possessed excellent optoelectronic properties and has gained interest as a light-harvesting material for photovoltaic technology over the past several years. However, the severe interfacial and bulk recombination obviously contribute to significant carrier transport loss thus leading to the deterioration of power conversion efficiency (PCE). In this work, buried interface and heterojunction engineering are synergistically employed to regulate the film growth kinetic and optimize the band alignment. Through this approach, the orientation of the precursor films is successfully controlled, promoting the preferred orientational growth of the (hk1) of the Sb2 Se3 films. Besides, interfacial trap-assisted nonradiative recombination loss and heterojunction band alignment are successfully minimized and optimized. As a result, the champion device presents a PCE of 9.24% with short-circuit density (JSC ) and fill factor (FF) of 29.47 mA cm-2 and 63.65%, respectively, representing the highest efficiency in sputtered-derived Sb2 Se3 solar cells. This work provides an insightful prescription for fabricating high-quality Sb2 Se3 thin film and enhancing the performance of Sb2 Se3 solar cells.

Smart glypican-3-targeting peptide-chlorin e6 conjugates for targeted photodynamic therapy of hepatocellular carcinoma.

Hepatocellular carcinoma (HCC) is a highly aggressive and lethal malignancy with poor prognosis, necessitating the urgent development of effective treatments. Targeted photodynamic therapy (PDT) offers a promising way to selectively eradicate tumor cells without affecting normal cells. Inspired by promising features of peptide-drug conjugates (PDCs) in targeted cancer therapy, herein a novel glypican-3 (GPC3)-targeting PDC-PDT strategy was developed for the precise PDT treatment of HCC. The GPC3-targeting photosensitizer conjugates were developed by attaching GPC3-targeting peptides to chlorin e6. Conjugate 8b demonstrated the ability to penetrate HCC cells via GPC3-mediated entry process, exhibiting remarkable tumor-targeting capacity, superior antitumor efficacy, and minimal toxicity towards normal cells. Notably, conjugate 8b achieved complete tumor elimination upon light illumination in a HepG2 xenograft model without harm to normal tissues. Overall, this innovative GPC3-targeting conjugation strategy demonstrates considerable promise for clinical applications for the treatment of HCC.

Takinib inhibits microglial M1 polarization and oxidative damage after subarachnoid hemorrhage by targeting TAK1-dependent NLRP3 inflammasome signaling pathway.

Transforming growth factor-ß-activated kinase 1 (TAK1) positively regulates oxidative stress and inflammation in different diseases. Takinib, a novel and specific TAK1 inhibitor, has beneficial effects in a variety of disorders. However, the effects of takinib on early brain injury (EBI) after subarachnoid hemorrhage (SAH) and the underlying molecular mechanisms remain unknown. Our study showed that takinib administration significantly inhibited phosphorylated TAK1 expression after SAH. In addition, takinib suppressed M1 microglial polarization and promoted M2 microglial polarization. Furthermore, blockade of TAK1 by takinib reduced neuroinflammation, oxidative damage, brain edema, and neuronal apoptosis, and improved neurological behavior after SAH. Mechanistically, we revealed that TAK1 inhibition by takinib mitigated reactive oxygen species (ROS) production and ROS-mediated nod-like receptor pyrin domain-containing protein 3 (NLRP3) inflammasome activation. In contrast, NLRP3 activation by nigericin abated the neuroprotective effects of takinib against EBI after SAH. In general, our study demonstrated that takinib could protect against EBI by targeting TAK1-ROS-NLRP3 inflammasome signaling. Inhibition of TAK1 might be a promising option in the management of SAH.

Comprehensive assessment of the efficacy and safety of a clay mask in oily and acne skin.

BACKGROUND: Oily skin, characterized by excessive sebum production, can lead to acne and have psychosocial impacts due to changes in appearance. Recent research has shown interest in treatments for oil control, with kaolin and bentonite emerging as promising options. Despite their potential, comprehensive studies on these ingredients are still in the nascent stages. AIM: This study aimed to assess the efficacy of a clay mask (La Roche-Posay Effaclar Sebo-Controlling Mask) in reducing skin oiliness and acne, and its safety for use. METHODS: In this study, 75 adults with oily or combination skin were enrolled and provided with a clay mask for twice-weekly use over 4 weeks. Clinical assessments, using instruments like Sebumeter, Vapometer, and Corneometer, were conducted at baseline, and after 1, 2, and 4 weeks, evaluating acne lesions, skin irritation, sebum content, and skin hydration. Participant self-assessment questionnaires were also utilized for subjective evaluation. Statistical analyses were performed accordingly. RESULTS: The study revealed significant improvements in acne-related outcomes, sebum content, skin evenness, stratum corneum water content, and transepidermal water loss following the application of the clay mask. Pore area and porphyrin area showed no significant changes. Tolerance assessment showed reduced dryness and irritation, with self-assessment indicating high product acceptability and perceived oil control effectiveness. CONCLUSION: This study demonstrated the clay mask's efficacy in managing acne and oily skin, improving hydration and texture. Significant improvements in skin parameters and high product safety were observed, supporting its suitability.

Ionic Conductivity and Structure of Glasses Synthesized by Mechanical-Milling Methods in the x[Na2S]-(100 - x) [0.5GeS2-0.5Ga2S3] System.

Chalcogenide glasses in the Na2S-GeS2-Ga2S3 pseudoternary system were synthesized using a combination route of melt-quenching and mechanical-milling methods. First, a glass rich in germanium (90GeS2-10Ga2S3) is synthesized by melt-quenching synthesis in a silica tube sealed under vacuum. This glass is used as a precursor for the second step of mechanochemistry to explore the Na2S-GeS2-Ga2S3 pseudoternary system. By using this synthesis route, the glass-forming ability is improved as the vitreous domain is enlarged, especially for Na- and Ga-rich compositions. The as-obtained amorphous powders are characterized by Raman spectroscopy, differential scanning calorimetry, X-ray total scattering, and pair distribution function (PDF) analysis. The evolution of the Raman features observed is reproduced using density functional theory calculations. Impedance spectroscopy was performed to determine the conductivity of the new glasses. The addition of germanium sulfide to the Na2S-Ga2S3 pseudobinary system enables one to increase the conductivity by 1 order of magnitude. The highest room-temperature ionic conductivity, as measured by impedance spectroscopy, is 1.8 × 10-5 S·cm-1.

Enhancing interface stability and ionic conductivity in the designed Na3SbP0.4xS4-xOx sulfide solid electrolyte through bridging oxygen.

The all-solid-state sodium battery has emerged as a promising candidate for energy storage. However, the limited electrochemical stability of the solid electrolyte, particularly in the presence of Na metal at the anode, along with low ionic conductivity, hinders its widespread application. In this work, the design of P and O elements in Na3SbS4 solid electrolyte was investigated through a series of structural tests and characterizations. The electrochemical stability was remarkably improved in the Na/Na3SbP0.16S3.6O0.4/Na battery, exhibiting a stability of 260 h under a current of 0.1 mA cm-2. Additionally, the room temperature conductivity of Na3SbP0.16S3.6O0.4 was enhanced to 3.82 mS cm-1, maintaining a value comparable to commercial standards. The proposed design strategy provides an approach for developing sodium ion solid-state batteries with high energy density and long lifespan. The stability of the solid electrolyte interface at the Na | solid electrolyte interface proves critical for the successful assembly of all-solid-state sodium ion batteries.