High-Pressure Synthesis of Quadruple Perovskite Oxide CaCu3Cr2Re2O12 with a High Ferrimagnetic Curie Temperature.

An AA'3B2B'2O12-type quadruple perovskite oxide of CaCu3Cr2Re2O12 was synthesized at 18 GPa and 1373 K. Both an A- and B-site ordered quadruple perovskite crystal structure was observed, with the space group Pn-3. The valence states are verified to be CaCu32+Cr23+Re25+O12 by bond valence sum calculations and synchrotron X-ray absorption spectroscopy. The spin interaction among Cu2+, Cr3+, and Re5+ generates a ferrimagnetic transition with the Curie temperature (TC) at about 360 K. Moreover, electric transport properties and specific heat data suggest the presence of a half-metallic feature for this compound. The present study provides a promising quadruple perovskite oxide with above-room-temperature ferrimagnetism and possible half-metallic properties, which shows potential in the usage of spintronic devices.

Electronic Modulation in Cu Doped NiCo LDH/NiCo Heterostructure for Highly Efficient Overall Water Splitting.

Layered double hydroxides (LDHs), promising bifunctional electrocatalysts for overall water splitting, are hindered by their poor conductivity and sluggish electrochemical reaction kinetics. Herein, a hierarchical Cu-doped NiCo LDH/NiCo alloy heterostructure with rich oxygen vacancies by electronic modulation is tactfully designed. It extraordinarily effectively drives both the oxygen evolution reaction (151 mV@10 mA cm-2 ) and the hydrogen evolution reaction (73 mV@10 mA cm-2 ) in an alkaline medium. As bifunctional electrodes for overall water splitting, a low cell voltage of 1.51 V at 10 mA cm-2 and remarkable long-term stability for 100 h are achieved. The experimental and theoretical results reveal that Cu doping and NiCo alloy recombination can improve the conductivity and reaction kinetics of NiCo LDH with surface charge redistribution and reduced Gibbs free energy barriers. This work provides a new inspiration for further design and construction of nonprecious metal-based bifunctional electrocatalysts based on electronic structure modulation strategies.

Improving Rate Performance of Encapsulating Lithium-Polysulfide Electrolytes for Practical Lithium-Sulfur Batteries.

The cycle life of high-energy-density lithium-sulfur (Li-S) batteries is severely plagued by the incessant parasitic reactions between Li metal anodes and reactive Li polysulfides (LiPSs). Encapsulating Li-polysulfide electrolyte (EPSE) emerges as an effective electrolyte design to mitigate the parasitic reactions kinetically. Nevertheless, the rate performance of Li-S batteries with EPSE is synchronously suppressed. Herein, the sacrifice in rate performance by EPSE is circumvented while mitigating parasitic reactions by employing hexyl methyl ether (HME) as a co-solvent. The specific capacity of Li-S batteries with HME-based EPSE is nearly not decreased at 0.1 C compared with conventional ether electrolytes. With an ultrathin Li metal anode (50 µm) and a high-areal-loading sulfur cathode (4.4 mgS cm-2 ), a longer cycle life of 113 cycles was achieved in HME-based EPSE compared with that of 65 cycles in conventional ether electrolytes at 0.1 C. Furthermore, both high energy density of 387 Wh kg-1 and stable cycle life of 27 cycles were achieved in a Li-S pouch cell (2.7 Ah). This work inspires the feasibility of regulating the solvation structure of LiPSs in EPSE for Li-S batteries with balanced performance.

Robust Crystal Phase Separation with Distinct Charge, Orbital, and Spin Orders in AgMn7O12.

An AA'3B4O12-type A-site-ordered quadruple perovskite oxide AgMn7O12 was prepared by high-pressure and high-temperature methods. At room temperature, the compound crystallizes into a cubic Im3̅ symmetry with a charge distribution of AgMn33+Mn43.5+O12. With the temperature decreasing to TCO,OO ≈ 180 K, the compound undergoes a structural phase transition toward a monoclinic C2/m symmetry, giving rise to a B-site charge- and orbital-ordered AgMn33+Mn23+Mn24+O12 phase. Moreover, this charge-/orbital-ordered main phase coexists with the initial cubic AgMn33+Mn43.5+O12 phase in the wide temperature range we measured. The charge-/orbital-ordered phase shows two antiferromagnetic phase transitions near 125 and 90 K, respectively. Short-range ferromagnetic correlations are found to occur for the initial B-site mixed cubic phase around 35 K. Because of the robust phase separation, considerable magnetoresistance effects are observed below TCO,OO in AgMn7O12.

Improved Biocompatibility and Angiogenesis of the Bone Titanium Scaffold through ERK1/2 Signaling Mediated by an Attached Strontium Element.

The promotion of early osseointegration is crucial for the success of biomedical titanium implants. Physical and chemical modifications to the material surface can significantly compensate for the lack of biocompatibility and early osseointegration of the implant. In this study, we implanted strontium onto titanium plates and analyzed the effect of strontium-doped materials on angiogenesis and biocompatibility in the human bone structure. Our findings demonstrated that strontium-loaded titanium sheet materials effectively promote human umbilical vein endothelial cell (HUVEC) biocompatibility and vascular differentiation ability, as evidenced by proliferation-apoptosis assays, RT-qPCR for vascular neogenesis markers, ELISA for vascular endothelial growth factor (VEGF) levels, and nitric oxide (NO) analysis. Mechanism studies based on RNAseq and Western blotting analysis revealed that strontium can promote titanium material biocompatibility with HUVEC cells and vascular neovascularization ability by activating the extracellular signal-regulated kinase 1/2 (ERK1/2) signaling pathway. Meanwhile, blocking the ERK1/2 signaling pathway could reverse the promotional effect of vascular formation. Overall, we have successfully fabricated a multifunctional biocompatible bone implant with better histocompatibility and angiogenesis compared to uncoated implants.

Visible light-induced catalytic performance of composite photocatalyst synthesized with nanomaterials WO3 and two-dimensional ultrathin g-C3N4.

To improve the visible light-induced catalytic activities of Ultrathin g-C3N4 (UCN), a promising photocatalyst WO3/UCN (WU) was synthesized. Its visible light-driven photocatalysis performance was controllable by adjusting the theoretical mass ratio of WO3/UCN. We have calibrated the optimal preparation conditions to be: WO3/UCN ratio as 1:1, the stirring time of the UCN and sodium tungstate mixture as 9 h and the volume of concentrated hydrochloric acid as 6 mL which was poured into the mixture solution with an extra stirring time of 1.5 h. The optimal photocatalyst WUopt had porous and wrinkled configurations. Its light absorption edge was 524 nm while that of UCN was 465 nm. The band gap of WUopt was 2.13 eV, 0.3 eV less than that of UCN. Therefore, the recombination rate of photo-generated electron-hole pairs of WUopt reduced significantly. The removal rate of WUopt on RhB was 97.3%. By contrast, the removal rate of UCN was much lower (53.4%). WUopt retained a high RhB removal rate, it was 5.5% lower than the initial one after being reused for five cycles. The photodegradation mechanism was facilitated through the strong oxidation behaviors from the active free radicals ·O2-, ·OH and h+ generated by WUopt under the visible light irradiation.

Correlating Polysulfide Solvation Structure with Electrode Kinetics towards Long-Cycling Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are promising due to ultrahigh theoretical energy density. However, their cycling lifespan is crucially affected by the electrode kinetics of lithium polysulfides. Herein, the polysulfide solvation structure is correlated with polysulfide electrode kinetics towards long-cycling Li-S batteries. The solvation structure derived from strong solvating power electrolyte induces fast anode kinetics and rapid anode failure, while that derived from weak solvating power electrolyte causes sluggish cathode kinetics and rapid capacity loss. By contrast, the solvation structure derived from medium solvating power electrolyte balances cathode and anode kinetics and improves the cycling performance of Li-S batteries. Li-S coin cells with ultra-thin Li anodes and high-S-loading cathodes deliver 146 cycles and a 338 Wh kg-1 pouch cell undergoes stable 30 cycles. This work clarifies the relationship between polysulfide solvation structure and electrode kinetics and inspires rational electrolyte design for long-cycling Li-S batteries.

Laser maskless fast patterning for multitype microsupercapacitors.

Downsizing electrode architectures have significant potential for microscale energy storage devices. Asymmetric micro-supercapacitors play an essential role in various applications due to their high voltage window and energy density. However, efficient production and sophisticated miniaturization of asymmetric micro-supercapacitors remains challenging. Here, we develop a maskless ultrafast fabrication of multitype micron-sized (10 × 10 µm2) micro-supercapacitors via temporally and spatially shaped femtosecond laser. MXene/1T-MoS2 can be integrated with laser-induced MXene-derived TiO2 and 1T-MoS2-derived MoO3 to generate over 6,000 symmetric micro-supercapacitors or 3,000 asymmetric micro-supercapacitors with high-resolution (200 nm) per minute. The asymmetric micro-supercapacitors can be integrated with other micro devices, thanks to the ultrahigh specific capacitance (220 mF cm-2 and 1101 F cm-3), voltage windows in series (52 V), energy density (0.495 Wh cm-3) and power density (28 kW cm-3). Our approach enables the industrial manufacturing of multitype micro-supercapacitors and improves the feasibility and flexibility of micro-supercapacitors in practical applications.

Cathode Kinetics Evaluation in Lean-Electrolyte Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries afford great promise on achieving practical high energy density beyond lithium-ion batteries. Lean-electrolyte conditions constitute the prerequisite for achieving high-energy-density Li-S batteries but inevitably deteriorates battery performances, especially the sulfur cathode kinetics. Herein, the polarizations of the sulfur cathode are systematically decoupled to identify the key kinetic limiting factor in lean-electrolyte Li-S batteries. Concretely, an electrochemical impedance spectroscopy combined galvanostatic intermittent titration technique method is developed to decouple the cathodic polarizations into activation, concentration, and ohmic parts. Therein, activation polarization during lithium sulfide nucleation emerges as the dominant polarization as the electrolyte-to-sulfur ratio (E/S ratio) decreases, and the sluggish interfacial charge transfer kinetics is identified as the main reason for degraded cell performances under lean-electrolyte conditions. Accordingly, a lithium bis(fluorosulfonyl)imide electrolyte is proposed to decrease activation polarization, and Li-S batteries adopting this electrolyte provide a discharge capacity of 985 mAh g-1 under a low E/S ratio of 4 µL mg-1 at 0.2 C. This work identifies the key kinetic limiting factor of lean-electrolyte Li-S batteries and provides guidance on designing rational promotion strategies to achieve advanced Li-S batteries.

Reforming the Uniformity of Solid Electrolyte Interphase by Nanoscale Structure Regulation for Stable Lithium Metal Batteries.

The stability of high-energy-density lithium metal batteries depends on the uniformity of solid electrolyte interphase (SEI) on lithium metal anodes. Rationally improving SEI uniformity is hindered by poorly understanding the effect of structure and components of SEI on its uniformity. Herein, a bilayer structure of SEI formed by isosorbide dinitrate (ISDN) additives in localized high-concentration electrolytes was demonstrated to improve SEI uniformity. In the bilayer SEI, LiNx Oy generated by ISDN occupies top layer and LiF dominates bottom layer next to anode. The uniformity of lithium deposition is remarkably improved with the bilayer SEI, mitigating the consumption rate of active lithium and electrolytes. The cycle life of lithium metal batteries with bilayer SEI is three times as that with common anion-derived SEI under practical conditions. A prototype lithium metal pouch cell of 430 Wh kg-1 undergoes 173 cycles. This work demonstrates the effect of a reasonable structure of SEI on reforming SEI uniformity.

Electrolyte Design for Improving Mechanical Stability of Solid Electrolyte Interphase in Lithium-Sulfur Batteries.

Practical lithium-sulfur (Li-S) batteries are severely plagued by the instability of solid electrolyte interphase (SEI) formed in routine ether electrolytes. Herein, an electrolyte with 1,3,5-trioxane (TO) and 1,2-dimethoxyethane (DME) as co-solvents is proposed to construct a high-mechanical-stability SEI by enriching organic components in Li-S batteries. The high-mechanical-stability SEI works compatibly in Li-S batteries. TO with high polymerization capability can preferentially decompose and form organic-rich SEI, strengthening mechanical stability of SEI, which mitigates crack and regeneration of SEI and reduces the consumption rate of active Li, Li polysulfides, and electrolytes. Meanwhile, DME ensures high specific capacity of S cathodes. Accordingly, the lifespan of Li-S batteries increases from 75 cycles in routine ether electrolyte to 216 cycles in TO-based electrolyte. Furthermore, a 417 Wh kg-1 Li-S pouch cell undergoes 20 cycles. This work provides an emerging electrolyte design for practical Li-S batteries.

An Organodiselenide Comediator to Facilitate Sulfur Redox Kinetics in Lithium-Sulfur Batteries with Encapsulating Lithium Polysulfide Electrolyte.

Lithium-sulfur (Li-S) batteries are regarded as promising high-energy-density energy storage devices. However, the cycling stability of Li-S batteries is restricted by the parasitic reactions between Li metal anodes and soluble lithium polysulfides (LiPSs). Encapsulating LiPS electrolyte (EPSE) can efficiently suppress the parasitic reactions but inevitably sacrifices the cathode sulfur redox kinetics. To address the above dilemma, a redox comediation strategy for EPSE is proposed to realize high-energy-density and long-cycling Li-S batteries. Concretely, dimethyl diselenide (DMDSe) is employed as an efficient redox comediator to facilitate the sulfur redox kinetics in Li-S batteries with EPSE. DMDSe enhances the liquid-liquid and liquid-solid conversion kinetics of LiPS in EPSE while maintains the ability to alleviate the anode parasitic reactions from LiPSs. Consequently, a Li-S pouch cell with a high energy density of 359 Wh kg-1 at cell level and stable 37 cycles is realized. This work provides an effective redox comediation strategy for EPSE to simultaneously achieve high energy density and long cycling stability in Li-S batteries and inspires rational integration of multi-strategies for practical working batteries.

Reduction of portosystemic gradient during transjugular intrahepatic portosystemic shunt achieves good outcome and reduces complications.

BACKGROUND: Transjugular intrahepatic portosystemic shunt (TIPS) is placed important role in the therapy of complications of portal hypertension, there is still no suitable criterion for a reduction in portosystemic gradient (PSG), which can both reduce PSG and maximize clinical results and minimize hepatic encephalopathy (HE). AIM: To compare the clinical outcomes and incidence of HE after one-third PSG reduction during TIPS in patients with variceal bleeding and refractory ascites. METHODS: A total of 1280 patients with portal-hypertension-related complications of refractory ascites or variceal bleeding who underwent TIPS from January 2016 to January 2019 were analyzed retrospectively. Patients were divided into group A (variceal hemorrhage and PSG reduced by one third, n = 479); group B (variceal hemorrhage and PSG reduced to < 12 mmHg, n = 412); group C (refractory ascites and PSG reduced by one third, n = 217); and group D (refractory ascites and PSG reduced to < 12 mmHg of PSG, plus medication, n = 172). The clinical outcomes were analyzed. RESULTS: By the endpoint of follow-up, recurrent bleeding was no different between groups A and B (χ 2 = 7.062, P = 0.374), but recurrent ascites did differ significantly between groups C and D (χ 2 = 14.493, P = 0.006). The probability of total hepatic impairment within 3 years was significantly different between groups A and B (χ 2 = 11.352, P = 0.005) and groups C and D (χ 2 = 13.758, P = 0.002). The total incidence of HE differed significantly between groups A and B (χ 2 = 7.932, P = 0.016), groups C and D (χ 2 = 13.637, P = 0.007). There were no differences of survival rate between groups A and B (χ 2 = 3.376, P = 0.369, log-rank test), but did differ significantly between groups C and D (χ 2 = 13.582, P = 0.014, log-rank test). CONCLUSION: The PSG reduction by one third may reduce the risk of HE, hepatic function damage and achieve good clinical results.

Recent Advances in Electrochemical-Based Silicon Production Technologies with Reduced Carbon Emission.

Sustainable and low-carbon-emission silicon production is currently one of the main focuses for the metallurgical and materials science communities. Electrochemistry, considered a promising strategy, has been explored to produce silicon due to prominent advantages: (a) high electricity utilization efficiency; (b) low-cost silica as a raw material; and (c) tunable morphologies and structures, including films, nanowires, and nanotubes. This review begins with a summary of early research on the extraction of silicon by electrochemistry. Emphasis has been placed on the electro-deoxidation and dissolution-electrodeposition of silica in chloride molten salts since the 21st century, including the basic reaction mechanisms, the fabrication of photoactive Si films for solar cells, the design and production of nano-Si and various silicon components for energy conversion, as well as storage applications. Besides, the feasibility of silicon electrodeposition in room-temperature ionic liquids and its unique opportunities are evaluated. On this basis, the challenges and future research directions for silicon electrochemical production strategies are proposed and discussed, which are essential to achieve large-scale sustainable production of silicon by electrochemistry.

Integrated serum pharmacochemistry and metabolomics reveal potential effective components and mechanisms of Shengjiang Xiexin decoction in the treatment of Clostridium difficile infection.

Shengjiang Xiexin Decoction (SXD) is a widely recognized formula in Traditional Chinese Medicine (TCM) for treating diarrhea and is commonly used in clinical practice. Clostridium difficile infection (CDI) is a type of antibiotic-associated diarrhea with a rising incidence rate that has severe consequences for humans. Recent clinical applications have found significant efficacy in using SXD as an adjunct to CDI treatment. However, the pharmacodynamic substance basis and therapeutic mechanism of SXD remain unclear. This study aimed to systematically analyze the metabolic mechanisms and key pharmacodynamic components of SXD in CDI mice by combining non-targeted metabolomics of Chinese medicine and serum medicinal chemistry. We established a CDI mouse model to observe the therapeutic effect of SXD on CDI. We investigated the mechanism of action and active substance composition of SXD against CDI by analyzing 16S rDNA gut microbiota, untargeted serum metabolomics, and serum pharmacochemistry. We also constructed a multi-scale, multifactorial network for overall visualization and analysis. Our results showed that SXD significantly reduced fecal toxin levels and attenuated colonic injury in CDI model mice. Additionally, SXD partially restored CDI-induced gut microbiota composition. Non-targeted serum metabolomics studies showed that SXD not only regulated Taurine and hypotaurine metabolism but also metabolic energy and amino acid pathways such as Ascorbate and aldarate metabolism, Glycerolipid metabolism, Pentose and glucuronate interconversions, as well as body and other metabolite production in the host. Through the implementation of network analysis methodologies, we have discerned that Panaxadiol, Methoxylutcolin, Ginsenoside-Rf, Suffruticoside A, and 10 other components serve as critical potential pharmacodynamic substance bases of SXD for CDI. This study reveals the metabolic mechanism and active substance components of SXD for the treatment of CDI mice using phenotypic information, gut microbiome, herbal metabolomics, and serum pharmacochemistry. It provides a theoretical basis for SXD quality control studies.

Molten salt electrosynthesis of Cr2GeC nanoparticles as anode materials for lithium-ion batteries.

The two-dimensional MAX phases with compositional diversity are promising functional materials for electrochemical energy storage. Herein, we report the facile preparation of the Cr2GeC MAX phase from oxides/C precursors by the molten salt electrolysis method at a moderate temperature of 700°C. The electrosynthesis mechanism has been systematically investigated, and the results show that the synthesis of the Cr2GeC MAX phase involves electro-separation and in situ alloying processes. The as-prepared Cr2GeC MAX phase with a typical layered structure shows the uniform morphology of nanoparticles. As a proof of concept, Cr2GeC nanoparticles are investigated as anode materials for lithium-ion batteries, which deliver a good capacity of 177.4 mAh g-1 at 0.2 C and excellent cycling performance. The lithium-storage mechanism of the Cr2GeC MAX phase has been discussed based on density functional theory (DFT) calculations. This study may provide important support and complement to the tailored electrosynthesis of MAX phases toward high-performance energy storage applications.

High-pressure single crystal growth and magnetoelectric properties of CdMn7O12.

The concurrent presence of large electric polarization and strong magnetoelectric coupling is quite desirable for potential applications of multiferroics. In this paper, we report the growth of CdMn7O12single crystals by flux method under a high pressure of 8 GPa for the first time. An antiferromagnetic (AFM) order with a polar magnetic point group is found to occur at the onset temperature ofTN1= 88 K (AFM1 phase). As a consequence, the pyroelectric current emerges atTN1and gradually increases and reaches its maximum atTset= 63 K, at which the AFM1 phase finally settles down. BelowTset, CdMn7O12single crystal exhibits a large ferroelectric polarization up to 2640µC m-2. Moreover, the spin-induced electric polarization can be readily tuned by applying magnetic fields, giving rise to considerable magnetoelectric coupling effects. Thus, the current CdMn7O12single crystal acts as a rare multiferroic system where both large polarization and strong magnetoelectric coupling merge concurrently.

Efficacy of Er:YAG Laser as a Debridement Method in Surgical Treatment for Peri-Implantitis: A Systematic Review.

PURPOSE: The present study systematically reviewed randomised controlled trials (RCT) to investigate the efficacy of Er:YAG laser (ERL) as a debridement method in surgical treatment of advanced peri-implantitis. MATERIALS AND METHODS: An electronic database search and a manual search were performed until March 2022. Outcome measures were clinical attachment level (CAL) gain, probing depth (PD) reduction, plaque index (PI) and bleeding on probing (BOP). The addressed PICO question was: Is ERL an effective debridement tool in the surgical treatment of advanced peri-implantitis? RESULTS: Five eligible randomised clinical trials (RCTs) were included in the qualitative analysis, one of which had unclear risk of bias. One study reported a statistically significant difference in terms of implant CAL gain and PD reduction in favour of the experimental group vs the control group, while four studies did not report any difference between the two groups. CONCLUSION: Due to methodological heterogeneity, such as non-standard control groups and laser parameters, this systematic review demonstrated inconclusive findings in terms of the efficacy of Er:YAG laser as a debridement method in surgical treatment of advanced peri-implantitis. The results of this review should be considered preliminary and further, well-designed studies with standardised comparators with laser parameters are warranted.

Research Progresses of Liquid Electrolytes in Lithium-Ion Batteries.

In recent years, the rapid development of modern society is calling for advanced energy storage to meet the growing demands of energy supply and generation. As one of the most promising energy storage systems, secondary batteries are attracting much attention. The electrolyte is an important part of the secondary battery, and its composition is closely related to the electrochemical performance of the secondary batteries. Lithium-ion battery electrolyte is mainly composed of solvents, additives, and lithium salts, which are prepared according to specific proportions under certain conditions and according to the needs of characteristics. This review analyzes the advantages and current problems of the liquid electrolytes in lithium-ion batteries (LIBs) from the mechanism of action and failure mechanism, summarizes the research progress of solvents, lithium salts, and additives, analyzes the future trends and requirements of lithium-ion battery electrolytes, and points out the emerging opportunities in advanced lithium-ion battery electrolytes development.

Taming Solvent-Solute Interaction Accelerates Interfacial Kinetics in Low-Temperature Lithium-Metal Batteries.

Lithium (Li)-metal batteries promise energy density beyond 400 Wh kg-1 , while their practical operation at an extreme temperature below -30 °C suffers severe capacity deterioration. Such battery failure highly relates to the remarkably increased kinetic barrier of interfacial processes, including interfacial desolvation, ion transportation, and charge transfer. In this work, the interfacial kinetics in three prototypical electrolytes are quantitatively probed by three-electrode electrochemical techniques and molecular dynamics simulations. Desolvation as the limiting step of interfacial processes is validated to dominate the cell impedance and capacity at low temperature. 1,3-Dioxolane-based electrolyte with tamed solvent-solute interaction facilitates fast desolvation, enabling the practical Li|LiNi0.5 Co0.2 Mn0.3 O2 cells at -40 °C to retain 66% of room-temperature capacity and withstand remarkably fast charging rate (0.3 C). The barrier of desolvation dictated by solvent-solute interaction environments is quantitatively uncovered. Regulating the solvent-solute interaction by low-affinity solvents emerges as a promising solution to low-temperature batteries.