Mn-Based Mullites for Environmental and Energy Applications.

Mn-based mullite oxides AMn2O5 (A = lanthanide, Y, Bi) is a novel type of ternary catalyst in terms of their electronic and geometric structures. The coexistence of pyramid Mn3+-O and octahedral Mn4+-O makes the d-orbital selectively active toward various catalytic reactions. The alternative edge- and corner-sharing stacking configuration constructs the confined active sites and abundant active oxygen species. As a result, they tend to show superior catalytic behaviors and thus gain great attention in environmental treatment and energy conversion and storage. In environmental applications, Mn-based mullites have been demonstrated to be highly active toward low-temperature oxidization of CO, NO, volatile organic compounds (VOCs), etc. Recent research further shows that mullites decompose O3 and ozonize VOCs from -20 °C to room temperature. Moreover, mullites enhance oxygen reduction reactions (ORR) and sulfur reduction reactions (SRR), critical kinetic steps in air-battery and Li-S batteries, respectively. Their distinctive structures also facilitate applications in gas-sensitive sensing, ionic conduction, high mobility dielectrics, oxygen storage, piezoelectricity, dehydration, H2O2 decomposition, and beyond. A comprehensive review from basic physicochemical properties to application certainly not only gains a full picture of mullite oxides but also provides new insights into designing heterogeneous catalysts.

Surface reconstruction of pyrite-type transition metal sulfides during oxygen evolution reaction.

Reconstruction universally occurs over non-layered transition metal sulfides (TMSs) during oxygen evolution reaction (OER), leading to the formation of active species metal (oxy)hydroxide and thus significantly influences the OER performance. However, the reconstruction process and underlying mechanism quantitatively remain largely unexplored. Herein, we proposed an electrochemical reaction mechanism, namely sulfide oxidation reaction (SOR), to elucidate the reconstruction process of pyrite-type TMSs. Based on this mechanism, we evaluated the reconstruction capability of NiS2 doped with transition metals V, Cr, Mn, Fe, Co, Cu, Mo, Ru, Rh, and Ir within different doped systems. Two key descriptors were thus proposed to describe the reconstruction abilities of TMSs: USOR (the theoretical electric potential of SOR) and ΔU (the difference between the theoretical electric potential of SOR and OER), representing the initiation electric potential of reconstruction and the intrinsic reconstruction abilities of TMSs, respectively. Our finding shows that a lower USOR readily initiate reconstruction at a lower potential and a larger ΔU indicating a poorer reconstruction ability of the catalyst during OER. Furthermore, Fe-doped CoS2 was used to validate the rationality of our proposed descriptors, being consistent with the experiment findings. Our work provides a new perspective on understanding the reconstruction mechanism and quantifying the reconstruction of TMSs.

Catalytic Ozonation of Polluter Benzene from -20 to >50 °C with High Conversion Efficiency and Selectivity on Mullite YMn2O5.

Catalytic decomposition of aromatic polluters at room temperature represents a green route for air purification but is currently challenged by the difficulty of generating reactive oxygen species (ROS) on catalysts. Herein, we develop a mullite catalyst YMn2O5 (YMO) with dual active sites of Mn3+ and Mn4+ and use ozone to produce a highly reactive O* upon YMO. Such a strong oxidant species on YMO shows complete removal of benzene from -20 to >50 °C with a high COx selectivity (>90%) through the generated reactive species O* on the catalyst surface (60 000 mL g-1 h-1). Although the accumulation of water and intermediates gradually lowers the reaction rate after 8 h at 25 °C, a simple treatment by ozone purging or drying in the ambient environment regenerates the catalyst. Importantly, when the temperature increases to 50 °C, the catalytic performance remains 100% conversion without any degradation for 30 h. Experiments and theoretical calculations show that such a superior performance stems from the unique coordination environment, which ensures high generation of ROS and adsorption of aromatics. Mullite's catalytic ozonation degradation of total volatile organic compounds (TVOC) is applied in a home-developed air cleaner, resulting in high efficiency of benzene removal. This work provides insights into the design of catalysts to decompose highly stable organic polluters.

Formaldehyde Decomposition from -20 °C to Room Temperature on a Mn-Mullite YMn2O5 Catalyst.

Large ambient temperature changes (-20->25 °C) bring great challenges to the purification of the indoor pollutant formaldehyde. Within such a large ambient temperature range, we herein report a manganese-based strategy, that is, a mullite catalyst (YMn2O5) + ozone, to efficiently remove the formaldehyde pollution. At -20 °C, the formaldehyde removal efficiency reaches 62% under the condition of 60,000 mL gcat-1 h-1. As the reaction temperature is increased to -5 °C, formaldehyde and ozone are completely converted into CO2, H2O, and O2, respectively. Such a remarkable performance was ascribed to the highly reactive oxygen species generated by ozone on the YMn2O5 surface based on the low temperature-programed desorption measurements. The in situ infrared spectra showed the intermediate product carboxyl group (-COOH) to be the key species. Based on the superior performance, we built a consumable-free air purifier equipped with mullite-coated ceramics. In the simulated indoor condition (25 °C and 30% relative humidity), the equipment can effectively decompose formaldehyde (150 m3 h-1) without producing secondary pollutants, rivaling a commercial removal efficiency. This work provides an air purification route based on the mullite catalyst + ozone to remove formaldehyde in an ambient temperature range (-20->25 °C).

Case report: Two PD-L1 positive unresectable advanced pancreatic carcinoma patients with microsatellite stability achieved R0 resection after PD-1 antibody plus chemotherapy as a successful downstaging therapy: A report of two cases.

Background: Nonobvious early symptoms are a prominent characteristic of pancreatic cancer, resulting in only 20% of patients having resectable tumors at the time of diagnosis. The optimal management of unresectable advanced pancreatic cancer (UAPC) remains an open research question. In this study, the tumors shrank significantly after PD-1 antibody combined with chemotherapy in two UAPC patients, and both have achieved R0 (pathologically negative margin) resection and survival to date. Case presentation: Case 1: A 53-year-old man was diagnosed with pancreatic adenocarcinoma (Stage III). He received six cycles of PD-1 antibody plus chemotherapy as the first-line treatment. The tumor was reduced from 11.8×8.8 cm to "0" (the pancreatic head was normal as shown by enhanced computed tomography, ECT) after preoperative neoadjuvant therapy (PNT) and the adverse effects were tolerable. The patient underwent radical surgery and achieved R0 resection. Case 2: A 43-year-old man diagnosed with pancreatic adenocarcinoma with liver metastasis (Stage IV) received three cycles of PD-1 antibody combined with chemotherapy. The tumor was reduced from 5.2×3.9 cm to 2.4×2.3 cm with no side effects. The patient also underwent radical surgery and achieved R0 resection. Conclusion: PD-1 antibody plus a chemotherapy regimen resulted in a surprising curative effect and safety in two patients with UAPC, which may portend an improvement in pancreatic carcinoma treatment. We may have a way for UAPC patients to obtain radical treatment and gain long-term survival. Two PD-L1 positive UAPC patients with microsatellite stability (MSS) enlighten us to have a more comprehensive understanding of the prediction of immunotherapy.

Fast-Charging Zn-Air Batteries with Long Lifetime Enabled by Reconstructed Amorphous Multi-Metallic Sulfide.

Developing fast-charging Zn-air batteries is crucial for widening their application but remains challenging owing to the limitation of sluggish oxygen evolution reaction (OER) kinetics and insufficient active sites of electrocatalysts. To solve this issue, a reconstructed amorphous FeCoNiSx electrocatalyst with high density of efficient active sites, yielding low OER overpotentials of 202, 255, and 323 mV at 10, 100, and 500 mA cm-2 , respectively, is developed for fast-charging Zn-air batteries with low charging voltages at 100-400 mA cm-2 . Furthermore, the fabricated 3241.8 mAh (20 mA cm-2 , 25 °C) quasi-solid Zn-air battery shows long lifetime of 500 h at -10 and 25 °C as well as 150 h at 40 °C under charging 100 mA cm-2 . The detailed characterizations combine with density functional theory calculations indicate that the defect-rich crystalline/amorphous ternary metal (oxy)hydroxide forms by the reconstruction of amorphous multi-metallic sulfide, where the electron coupling effect among multi-active sites and migration of intermediate O* from Ni site to the Fe site breaks the scaling relationship to lead to a low theoretical OER overpotential of 170 mV, accounting for the outstanding fast-charging property. This work not only provides insights into designing advanced OER catalysts by the self-reconstruction of the pre-catalyst but also pioneers a pathway for practical fast-charging Zn-air batteries.

Cooperative Catalysis toward Oxygen Reduction Reaction under Dual Coordination Environments on Intrinsic AMnO3 -Type Perovskites via Regulating Stacking Configurations of Coordination Units.

It remains challenging for pure-phase catalysts to achieve high performance during the electrochemical oxygen reduction reaction to overcome the sluggish kinetics without the assistance of extrinsic conditions. Herein, a series of pristine perovskites, i.e., AMnO3 (A = Ca, Sr, and Ba), are proposed with various octahedron stacking configurations to demonstrate the cooperative catalysis over SrMnO3 jointly explored by experiments and first-principles calculations. Comparing with the unitary stacking of coordination units in CaMnO3 or BaMnO3 , the intrinsic SrMnO3 with a mixture of corner-sharing and face-sharing octahedron stacking configurations demonstrates superior activity (Ehalf-wave  = 0.81 V), and charge-discharge stability over 400 h without the voltage gap (≈0.8 V) increasing in zinc-air batteries. The theoretical study reveals that, on the SrMnO3 (110) surface, the active sites switch from coordinatively unsaturated atop Mn (*OO, *OOH) to Mn-Mn bridge (*O, *OH). Therefore, the intrinsic dual coordination environments of Mn-Ocorner and Mn-Oface enable cooperative modulation of the interaction strength of the oxygen intermediates with the surface, inducing the decrease of the *OH desorption energy (rate-limiting step) unrestricted by scaling relationships with the overpotential of ≈0.28 V. This finding provides insights into catalyst design through screening intrinsic structures with multiple coordination unit stacking configurations.

Sponge Effect Boosting Oxygen Reduction Reaction at the Interfaces between Mullite SmMn2O5 and Nitrogen-Doped Reduced Graphene Oxide.

Exploring the effect of interfacial structural properties on catalytic performance of hybrid materials is essential in rationally designing novel electrocatalysts with high stability and activity. Here, in situ growth of mullite SmMn2O5 on nitrogen-doped reduced graphene oxide (SMO@NrGO) is achieved for highly efficient oxygen reduction reaction (ORR). Combining X-ray photoelectron spectroscopy and density functional theory calculations, interfacial chemical interactions between Mn and substrates are verified. Interestingly, as revealed by charge density difference, the interfacial Mn-N(C) bonds display a sponge effect to store and compensate electrons to boost the ORR process. In addition, bidentate adsorption of oxygen intermediates instead of monodentate ones is observed in hybrid materials, which facilitates the interactions between intermediates and active sites. Experimentally, the hybrid catalyst SMO@NrGO exhibits a half-wave potential as high as 0.84 V, being comparable to benchmark Pt/C and higher than that of the pure SMO (0.68 V). The Zn-air battery assembled with SMO@NrGO shows a high discharge peak power density of 244 mW cm-2 and superior cycling stability against noble metals.