Binder assisted graphene derivatives as lubricants in copper: Improved tribological performance for industrial application.

Originally derived from graphite, high-quality single-layer graphene is an excellent anti-wear and -friction additive in metal matrix. Here, the tribological performance of 3 different commercialized graphene derivatives (e.g., graphene oxide [GO], reduced graphene oxide [RGO], and graphene nanoplatelet [GNP]) as additives in a Cu matrix, were investigated from an industrial perspective. To increase the interaction of graphene derivatives with Cu particles, and addressing the aggregation problem of the graphene derivatives, different binders (polyvinyl alcohol [PVA] and cellulose nanocrystals [CNC]) were introduced into the system. Benefiting from such a strategy, a uniform distribution of the graphene derivatives in Cu matrix was achieved with graphene loading up to 5 wt %. After high-temperature sintering, the graphene is preserved and well distributed in the Cu matrix. It was found that the GNP-containing sample shows the most stable friction coefficient behavior. However, GO and RGO also improve the tribological performance of Cu under different circumstances.

Effect of static pressure on ultrasonic liquid phase exfoliation of few-layer graphene.

Ultrasonic Liquid Phase Exfoliation (LPE) has gathered attention from both scientific and industrial communities for its accessibility and cost-effectiveness in producing graphene. However, this technique has faced challenges such as low yield and long production time. In this study, we developed a cyclic ultrasonication system to exfoliate expanded graphite (EG) by applying static pressure to a flow chamber to address these challenges. Using deionized water (DIW) as solvent and polyvinylpyrrolidone (PVP) as dispersion, we obtained graphene slurries with an average lateral size of 7 µm and averaged number of layers of 3.5 layers, after 40 min of ultrasonication. After centrifugation, the yield of single and bilayer graphene was approximately 16 %. The findings showed that regulating hydrostatic pressure can effectively affect the lateral size and number of layers of few-layer graphene. The proposed method is of good potential for scaled-up production of few-layer graphene.

Design and Effect of Resonant Ultrasonic Vibration-Assisted Laser Cladding (R-UVALC) on AlCrFeMnNi High-Entropy Alloy.

The design of the resonant ultrasonic vibration-assisted laser cladding (R-UVALC) setup involved employing finite element analysis (FEA) to simulate the ultrasonic transducer, horn, and workpiece in a resonance state. The impact of R-UVALC on AlCrFeMnNi high-entropy alloys was assessed using various ultrasonic vibration amplitudes of 0, 5, 10, and 15 µm, with a constant frequency of 20 kHz. Ultrasonic vibrations reduced pores and cracks and increased the clad breadth, melt pool wetting angle, and laser-clad layer consistency. The columnar elongated grains in proximity to the substrate surface underwent a size reduction and transformed into grains with a more equiaxed shape with the utilization of ultrasonic vibrations at an amplitude of 5 µm. Laser cladding performed without ultrasonic vibrations yields two phases: face-centered cubic (FCC) and body-centered cubic (BCC). However, when the coating is exposed to ultrasonic vibrations with an amplitude of 5 µm, it forms a solitary body-centered cubic (BCC) phase. The microhardness tripled compared to the substrate, and the most significant microhardness value was achieved at 5 µm of ultrasonic vibration. The friction coefficient was assessed at an ambient temperature, revealing that an ultrasonic amplitude yields the lowest friction coefficient, demonstrating the excellent wear resistance properties of the coating. The analysis of the 3D surface profile of the wear indicates that the use of ultrasonic aid with a 5 µm amplitude leads to reduced depth of scars, and the primary wear mechanism observed is abrasive and oxidative wear with fewer grooves and debris. In addition, XPS analysis revealed the presence of metal components in an oxidized condition, suggesting that the wear process is oxidative in nature. Integrating the R-UVALC setup into a resonance state can significantly enhance the efficiency of the laser cladding process in the laser cladding field.

Targeted chemical profiling for p-HAP glycosides by using molecular networking and comparative analysis of their contents between Artemisia japonica and Artemisia capillaris.

A total of 65 phenolic acid compounds were annotated or identified by UHPLC-MS/MS method, among them, 17 p-HAP (p-hydroxyacetophenone) glycosides were firstly targeted profiled based on molecular networking. Their characteristic product ions of MS/MS spectra were found and examined on the guideline of targeted isolation. As a result, a new p-HAP glycoside was thus obtained and determined as 2'-O-caffeoyl-p-HAP-4-O-ß-D-glucopyranoside (33) based on 1D and 2D NMR data. Besides, multicomponents quantitative analysis indicated the distinct regional variability in chemicals distribution of A. japonica, and meanwhile, the contents of p-HAP glycosides from A. japonica were higher than those in A. capillaris as a whole, which further suggested the potential medicinal value of A. japonica.

Single-nucleus transcriptome sequencing reveals hepatic cell atlas in pigs.

BACKGROUND: As the largest substantive organ of animals, the liver plays an essential role in the physiological processes of digestive metabolism and immune defense. However, the cellular composition of the pig liver remains poorly understood. This investigation used single-nucleus RNA sequencing technology to identify cell types from liver tissues of pigs, providing a theoretical basis for further investigating liver cell types in pigs. RESULTS: The analysis revealed 13 cells clusters which were further identified 7 cell types including endothelial cells, T cells, hepatocytes, Kupffer cells, stellate cells, B cells, and cholangiocytes. The dominant cell types were endothelial cells, T cells and hepatocytes in the liver tissue of Dahe pigs and Dahe black pigs, which accounts for about 85.76% and 82.74%, respectively. The number of endothelial cells was higher in the liver tissue of Dahe pigs compared to Dahe black pigs, while the opposite tendency was observed for T cells. Moreover, functional enrichment analysis demonstrated that the differentially expressed genes in pig hepatic endothelial cells were significantly enriched in the protein processing in endoplasmic reticulum, MAPK signaling pathway, and FoxO signaling pathway. Functional enrichment analysis demonstrated that the differentially expressed genes in pig hepatic T cells were significantly enriched in the thyroid hormone signaling pathway, B cell receptor signaling pathway, and focal adhesion. Functional enrichment analysis demonstrated that the differentially expressed genes in pig hepatic hepatocytes were significantly enriched in the metabolic pathways. CONCLUSIONS: In summary, this study provides a comprehensive cell atlas of porcine hepatic tissue. The number, gene expression level and functional characteristics of each cell type in pig liver tissue varied between breeds.

Wireless deep-brain neuromodulation using photovoltaics in the second near-infrared spectrum.

Conventional electrical neuromodulation techniques are constrained by the need for invasive implants in neural tissues, whereas methods using optogenetic are subjected to genetic alterations and hampered by the poor tissue penetration of visible light. Photovoltaic neuromodulation using light from the second near-infrared (NIR-II) spectrum, which minimizes scattering and enhances tissue penetration, shows promise as an alternative to existing neuromodulation technologies. NIR-II light has been used in deep-tissue imaging and in deep-brain photothermal neuromodulation via nanotransducers. This Perspective will provide an overview for the underpinning mechanisms of photovoltaic neuromodulation and identify avenues for future research in materials science and bioengineering that can further advance NIR-II photovoltaic neuromodulation methods.

[A new cinnamic acid ester derivative from Liquidambaris Resina].

Twelve compounds were isolated from Liquidambaris Resina by silica gel column chromatography and thin layer chromatography. Their structures were identified on the basis of spectral data, electron capture detector data, and physicochemical properties as(2'R, 3'R)-2',3'-dihydroxy-hydrocinnamyl-(E)-cinnamate(1),(E)-cinnamyl-(E)-cinnamate(2), cinnamic acid(3), 28-norlup-20(29)-en-3-one-17ß-hydroperoxide(4), erythrodiol(5), 13ß,28-epoxy-30-hydroxyolean-1-en-3-one(6),(3ß)-olean-12-ene-3,23-diol(7), 2α,3α-dihydroxy-olean-12-en-28-oic acid(8), 28-hydroxyolean-12-en-3-one(9), 3-epi-oleanolic acid(10), 3-oxo-oleanolic acid(11), and hederagenin(12). Compound 1 was a new cinnamic acid ester derivative and compounds 2-4,6-8, and 12 were isolated from Liquidambaris Resina for the first time. Compounds 4, 5, 10, and 12 exerted inhibitory effects on the proliferation of human umbilical vein endothelial cells(HUVEC) with the IC_(50) values of(17.43±2.17),(35.32±0.61),(27.50±0.80), and(46.30±0.30) µmol·L~(-1), respectively.

Progress on Z genome biosynthetic pathway of bacteriophage.

There are abundant base modifications in bacteriophages' genomes, mainly for avoiding the digestion of host endonucleases. More than 40 years ago, researchers discovered that 2-amino-adenine (Z) completely replaced adenine (A) and forms a complementary pairing with three hydrogen bonds with thymine (T) in the DNA of cyanophage S-2L, forming a distinct "Z-genome". In recent years, researchers have discovered and validated the biosynthetic pathway of Z-genome in various bacteriophages, constituting a multi-enzyme system. This system includes the phage-encoded enzymes deoxy-2'-aminoadenylosuccinate synthetase (PurZ), deoxyadenosine triphosphate hydrolase (dATPase/DatZ), deoxyadenosine/deoxyguanosine triphosphate pyrophosphatase (DUF550/MazZ) and DNA polymerase (DpoZ). In this review, we provide a concise overview of the historical discovery on diversely modified nucleosides in bacteriophages, then we comprehensively summarize the research progress on multiple enzymes involved in the Z-genome biosynthetic pathway. Finally, the potential applications of the Z-genome and the enzymes in its biosynthetic pathway are discussed in order to provide reference for research in this field.

Effect of Dynamic High-Pressure Microfluidizer on Physicochemical and Microstructural Properties of Whole-Grain Oat Pulp.

By avoiding the filtration step and utilizing the whole components of oats, the highest utilization rate of raw materials, improving the nutritional value of products and reducing environmental pollution, can be achieved in the production of whole-grain oat drinks. This study innovatively introduced a dynamic high-pressure microfluidizer (DHPM) into the processing of whole-grain oat pulp, which aimed to achieve the efficient crushing, homogenizing and emulsification of starch, dietary fiber and other substances. Due to DHPM processing, the instability index and slope value were reduced, whereas the ß-glucan content, soluble protein content and soluble dietary fiber content were increased. In the samples treated with a pressure of 120 MPa and 150 MPa, 59% and 67% more ß-glucan content was released, respectively. The soluble dietary fiber content in the samples treated with a pressure of 120 MPa and 150 MPa was increased by 44.8% and 43.2%, respectively, compared with the sample treated with a pressure of 0 MPa. From the perspective of the relative stability of the sample and nutrient enhancement, the processing pressure of 120 MPa was a good choice. In addition, DHPM processing effectively reduced the average particle size and the relaxation time of the water molecules of whole-grain oat pulp, whereas it increased the apparent viscosity of whole-grain oat pulp; all of the above changes alleviated the gravitational subsidence of particles to a certain extent, and thus the overall stability of the system was improved. Furthermore, CLSM and AFM showed that the samples OM-120 and OM-150 had a more uniform and stable structural system as a whole. This study could provide theoretical guidance for the development of a whole-grain oat drink with improved quality and consistency.

In Situ Transformable Pro-nanotheranostic Platform for Activable Photoacoustic Imaging and Synergistic Photothermal/Chemodynamic Cancer Therapy.

Nanotheranostic platforms integrated with diagnostic and therapeutic functions have been widely developed for tumor medicine. However, the "always-on" nanotheranostic platforms suffer from poor tumor specificity, which may largely restrict therapeutic efficacy and prevent precise theranostics. Here, we develop an in situ transformable pro-nanotheranostic platform (ZnS/Cu2O@ZIF-8@PVP) by encapsulating ZnS and Cu2O nanoparticles in a metal-organic framework (MOF) nanomaterial of ZIF-8 that allows activable photoacoustic (PA) imaging and synergistic photothermal/chemodynamic therapy (PTT/CDT) of tumors in vivo. It is shown that the pro-nanotheranostic platform gradually decomposes and releases ZnS nanoparticles and Cu+ ions in acidic conditions, which spontaneously trigger a cation exchange reaction and synthesize Cu2S nanodots in situ with activated PA signals and PTT effects. Moreover, the excessive Cu+ ions function as Fenton-like catalysts and catalyze the production of highly reactive hydroxyl radicals (•OH) for CDT using elevated levels of H2O2 in tumor microenvironments (TMEs). In vivo studies demonstrate that the in situ transformable pro-nanotheranostic platform can specifically image tumors via PA and photothermal imaging and efficiently ablate tumors through synergistic CDT/PTT. Our in situ transformable pro-nanotheranostic platform could provide a new arsenal for precise theranostics in cancer therapy.

Dexmedetomidine promotes necroptosis by upregulating PARP1 in non-small cell lung cancer.

The score and prognostic value of necroptosis were analyzed in the TCGA and GSE120622 datasets. Necroptosis has the highest correlation with the immune microenvironment, and the high score in NSCLC correlates with poor prognosis. Differentially expressed genes between non-small cell lung cancer (NSCLC) and controls in both datasets were identified and subjected to construct co-expression networks, respectively. Black and blue modules were selected because of high correction with necroptosis. The intersected two module genes were mainly involved in immune and inflammatory response, cell cycle process and DNA replication. Nine marker genes of necroptosis were identified in these modules and considered as candidate genes. Based on candidate genes, we identified two clusters utilizing concordance clustering, additionally dividing NSCLC samples into high- and low-risk groups. There were significant differences in overall survival between two clusters and between high- and low-risk groups. Furthermore, PARP1 was found among the candidate genes to be the target gene of dexmedetomidine acting on necroptosis. Molecular experimental results found that PARP1 was highly expressed in the dexmedetomidine treated NSCLC compared with the NSCLC. Candidate genes associated with necroptosis may provide a powerful prognostic tool for precision oncology. Dexmedetomidine may target PARP1 to promote necroptosis and then affect NSCLC.

Teleoperation control of a wheeled mobile robot based on Brain-machine Interface.

This paper presents a novel teleoperation system using Electroencephalogram (EEG) to control the motion of a wheeled mobile robot (WMR). Different from the other traditional motion controlling method, the WMR is braked with the EEG classification results. Furthermore, the EEG will be induced by using the online BMI (Brain Machine Interface) system, and adopting the non-intrusion induced mode SSVEP (steady state visually evoked potentials). Then, user's motion intention can be recognized by canonical correlation analysis (CCA) classifier, which will be converted into motion commands of the WMR. Finally, the teleoperation technique is utilized to manage the information of the movement scene and adjust the control instructions based on the real-time information. Bezier curve is used to parameterize the path planning of the robot, and the trajectory can be adjusted in real time by EEG recognition results. A motion controller based on error model is proposed to track the planned trajectory by using velocity feedback control, providing excellent track tracking performance. Finally, the feasibility and performance of the proposed teleoperation brain-controlled WMR system are verified using demonstration experiments.

Design, Synthesis, Antibacterial Evaluation, Three-Dimensional Quantitative Structure-Activity Relationship, and Mechanism of Novel Quinazolinone Derivatives.

Plant bacterial illnesses are common and cause dramatic damage to agricultural goods all over the world, yet there are few efficient bactericides to alleviate them at present. To discover novel antibacterial agents, two series of quinazolinone derivatives with novel structures were synthesized and their bioactivity against plant bacteria was tested. Combining CoMFA model search and the antibacterial bioactivity assay, D32 was identified as a potent antibacterial inhibitor against Xanthomonas oryzae pv. Oryzae (Xoo), with an EC50 value of 1.5 µg/mL, much better in inhibitory capacity compared to bismerthiazol (BT) and thiodiazole copper (TC) (31.9 and 74.2 µg/mL). The activities of compound D32 against rice bacterial leaf blight in vivo were 46.7% (protective activities) and 43.9% (curative activities), better than commercial drug thiodiazole copper (29.3% protective activities and 30.6% curative activities). Flow cytometry, proteomics, reactive oxygen species, and key defense enzymes were used to further investigate the relevant mechanisms of action of D32. The identification of D32 as an antibacterial inhibitor and revelation of its recognition mechanism not only open the possibility of developing new therapeutic strategies for treatment of Xoo but also provide clues for elucidation of the acting mechanism of quinazolinone derivative D32, which is a possible clinical candidate worth in-depth study.

[Advantage analysis of modified day surgery procedure for concealed penis].

OBJECTIVE: The modified day surgery procedure was compared with traditional inpatient procedure and standard day surgery procedure of concealed penile surgery to investigate its advantages, as well as the feasibility of promoting it in our country. METHODS: Retrospective analyzing the clinical data between 135 cases of the concealed penis in children who underwent modified day surgery (day group) and 101 cases who underwent hospitalization surgery (hospitalization group) at the Second Hospital of Hebei Medical University and the results of follow-up.The modified day surgery procedure involves the establishment of dedicated day wards in each surgical department, where the patient's condition is monitored until 8 o'clock the following morning to assess their discharge eligibility.The children's clinical data was divided into two groups to compare clinical parameters, including age at surgery, bleeding volume, operation time, hospitalization expenses, day of hospitalization, and the occurrence of short-term complications before the initial dressing change after surgery.The satisfaction survey of the children was conducted among three distinct groups: the modified day group, the standard day group, and the hospitalization group enabling a comparison of satisfaction levels among these groups. RESULTS: The mean ages of the inpatient and day surgery groups were 8.92±4.42 years old and 11.85±4.43 years old, respectively. No significant differences were observed between these two groups regarding operation time, bleeding volume, and postoperative complications (P>0.05). Compared to the inpatient group, the mean inpatient time and the hospitalization cost of the day group decreased by 69% and 27%, respectively (P<0.05). The patients in the modified procedure group reported the highest satisfaction among the three groups. CONCLUSION: Modified day surgery procedure offers advantages over the standard day surgery procedure and traditional inpatient surgical procedures for the operative treatment of the concealed penis, which makes it suitable for large-scale popularization in China.

Deepening the Action on Salt Reduction in China-suggestions on strategy and implementation plan / 中华预防医学杂志

Excessive sodium/salt intake is the leading dietary risk factor for the loss of healthy life in the Chinese population. The "Healthy China 2030" Action Plan set the goal of reducing salt intake by 20% by 2030. However, salt intake in China is still at a very high level in the world, with adults reaching 11 g/d, more than twice the recommended limit of 5 g/d. The current policies and action plans of China have targeted catering workers, children, adolescents, and home chefs in salt, oil, and sugar reduction actions. However, there are still obvious deficiencies in the coordinated promotion and implementation. This study, therefore, proposed a set of comprehensive strategies (named CHRPS that is composed of communication and education, salt reduction in home cooking, salt reduction in restaurants, reducing salt content in pre-packaged food, and surveillance and evaluation) and key implementation points for further deepening the salt reduction action in China. These strategies were developed based on the main sources of dietary sodium for Chinese residents, the status of "knowledge, attitude and practice" in salt reduction, evidence of effective intervention measures, existing policies and requirements, and the salt reduction strategies of the World Health Organization and experience from some other countries. As a scientific reference, the CHRPS strategies will help the government and relevant organizations quickly implement salt reduction work and facilitate the earlier realization of China's salt reduction goal.

Distribution of multiple chalazia in eyelids of pediatrics requiring surgery in southeast China: a hospital-based cross-sectional study.

Background: Multiple chalazia are common in children, and many are treated by surgery. However, the distribution of different types of multiple chalazia has not been studied. This research aimed to investigate the location and number of multiple chalazia in pediatrics who need surgical treatments. Methods: Patients with multiple chalazia treated by incision and curettage surgery (I&C) in a tertiary children's hospital between June and December 2016 were reviewed. Demographic data, locations, and numbers of chalazia were recorded. Data were analyzed using generalized linear models of the counts and the occurrences of chalazia. Hypotheses were tested using likelihood ratio tests appropriate for each type of data. Results: The study included 128 subjects, most of which were 1-3 years old. The majority of patients had bilateral chalazia (95.3%), and the proportions of patients with internal, external, and marginal chalazion differed dramatically (99.2%, 61.7%, and 2.3%, respectively). The number of internal and external chalazia did not vary significantly with gender, age, or residence of the patients. Internal chalazia were located more frequently in the upper lids (p<0.001). External chalazia showed no preference of localization. The average number of internal chalazia in each eyelid did not relate to the presence of external chalazia. Conclusions: Multiple chalazia are common among younger children in southeast China. The anatomical distribution varies depending on the type of chalazion. Multiple chalazia often occur bilaterally and internally. If doctors are more aware of the anatomical distribution of chalazia, this might result in a higher success rate of I&C.

[Effect of electroacupuncture regulating NLRP3/Caspase-1 pathway on pyroptosis of dopaminergic neurons in rats with Parkinson's disease].

OBJECTIVE: To observe the effect of electroacupuncture (EA) on the pyrolysis of dopaminergic neurons in rats with Parkinson's disease (PD), so as to explore its underlying molecular mechanism. METHODS: Male SD rats were randomly divided into the sham operation, model, EA, MCC950 and EA+MCC950 groups, with 12 rats in each group. The PD rat model was established by two-point injection of 6-OHDA. Rats in the MCC950 group were injected with MCC950 at the dose of 10 mg/kg, once a day; for rats of EA group, EA was applied to "Taichong" (LR3) and "Fengfu"(GV16) for 30 min, once a day; rats in the EA+ MCC950 group were given MCC950 injection and EA once a day. All above interventions were performed for 2 weeks. After the intervention, the behavioral changes of rats were observed using rotating induction experiment, rotating rod experiment and open field experiment; the positive expressions of dopaminergic neuronal markers tyrosine hydroxylase (TH) and α-Synuclein (α-Syn) in substantia nigra striatum were detected by immunohistochemistry; the damage of dopaminergic neurons in substantia nigra striatum was observed after HE staining; immunopositive coexpression of brain nucleotide-binding oligomerization domain like receptor protein 3 (NLRP3), Caspase-1 and ionized calcium binding adapter1 (Iba-1) were detected by immunofluorescence double staining; the levels of interleukin (IL)-1ß and IL-18 in brain tissues were detected by ELISA; the protein expression levels of NLRP3, Cleaved Caspase-1 and apoptosis-associated speck-like protein containing a CARD (ASC) in the substantia nigra striatum were detected by Western blot. RESULTS: Compared with the sham operation group, the number of rotations of rotating induction experiment, the residence time in the central area of open field experiment, the positive expression of α-Syn, the positive co-expressions of NLRP3/Iba-1 and Caspase-1/Iba-1, the contents of IL-1ß and IL-18 in brain tissues, and the protein expression levels of NLRP3, ASC and Cleaved Caspase-1 in substantia nigra striatum were significantly increased (P<0.05), while the drop latency of rotating rod experiment, the rearing times and the total distance of open field experiment, and the positive expression of TH in substantia nigra striatum were significantly decreased (P<0.05) in the model group. Compared with the model group, the above mentioned markers were reversed in EA, MCC950 and EA+MCC950 groups (P<0.05), and the improvement of the EA+MCC950 group was more obvious than those of the MCC950 and EA groups. In the model group, the neurons were disorderly arranged, the number of neurons was reduced, the cytoplasm was swollen, and some of them were vacuolar degeneration; while the degree of neuronal arrangement disorder, cytoplasmic swelling and the vacuolar degeneration were reduced in varying degrees in the MCC950, EA and EA+MCC950 groups. CONCLUSION: The ameliorative effect of EA on dopaminergic neuron damage in PD rats may be related to its effects in inhibiting NLRP3/Caspase-1 mediated neuronal pyrosis.

Proximity-driven bioorthogonal reactions via DNA circuits enable the accurate aptasensing of non-nucleic acid targets.

Tetrazine-mediated bioorthogonal reactions were rationally coupled with DNA cascade circuits to enable proximal decaging, which allowed the construction of a fluorogenic aptasensor for the accurate and amplified sensing of non-nucleic acid targets in live cells.

Methanol-Dependent Carbon Fixation for Irreversible Synthesis of d-Allulose from d-Xylose by Engineered Escherichia coli.

d-Allulose is a rare hexose with great application potential, owing to its moderate sweetness, low energy, and unique physiological functions. The current strategies for d-allulose production, whether industrialized or under development, utilize six-carbon sugars such as d-glucose or d-fructose as a substrate and are usually based on the principle of reversible Izumoring epimerization. In this work, we designed a novel route that coupled the pathways of methanol reduction, pentose phosphate (PP), ribulose monophosphate (RuMP), and allulose monophosphate (AuMP) for Escherichia coli to irreversibly synthesize d-allulose from d-xylose and methanol. After improving the expression of AlsE by SUMO fusion and regulating the carbon fluxes by knockout of FrmRAB, RpiA, PfkA, and PfkB, the titer of d-allulose in fed-batch fermentation reached ≈70.7 mM, with a yield of ≈0.471 mM/mM on d-xylose or ≈0.512 mM/mM on methanol.