Distributions of candidate vaccine Targets, virulence Factors, and resistance features of invasive group B Streptococcus using Whole-Genome Sequencing: A Multicenter, population-based surveillance study.

BACKGROUND: Group B Streptococcus (GBS) is a leading cause of morbidity and mortality in young infants worldwide. This study aimed to investigate candidate GBS vaccine targets, virulence factors, and antimicrobial resistance determinants. METHODS: We used whole-genome sequencing to characterize invasive GBS isolates from infants < 3 months of age obtained from a multicenter population-based study conducted from 2015 to 2021 in China. RESULTS: Overall, seven serotypes were detected from 278 GBS isolates, four (Ia, Ib, III, V) of which accounted for 97.8 %. We detected 30 sequence types (including 10 novel types) that were grouped into six clonal complexes (CCs: CC1, CC10, CC17, CC19, CC23 and CC651); three novel ST groups in CC17 were detected, and the rate of CC17, considered a hyperinvasive neonatal clone complex, was attached to 40.6 % (113/278). A total of 98.9 % (275/278) of isolates harbored at least one alpha-like protein gene. All GBS isolates contained at least one of three pilus backbone determinants and the pilus types PI-2b and PI-1 + PI-2a accounted for 79.8 % of the isolates. The 112 serotype III/CC17 GBS isolates were all positive for hvgA. Most of the isolates (75.2 %) were positive for serine-rich repeat glycoprotein determinants (srr1or srr2). Almost all isolates possessed cfb (99.6 %), c1IE (100 %), lmb (95.3 %) or pavA (100 %) gene. Seventy-seven percent of isolates harboured more than three antimicrobial resistance genes with 28.4 % (79/278) gyrA quinoloneresistancedeterminants mutation, 83.8 % (233/278) carrying tet cluster genes and 77.3 % (215/278) carrying erm genes which mediated fluoroquinolone, tetracycline and clindamycin resistance, respectively." CONCLUSIONS: The findings from this large whole-genome sequence of GBS isolates establish important baseline data required for further surveillance and evaluating the impact of future vaccine candidates.

Microscopic Understanding of Interfacial Performance and Antifoaming Mechanism of REP Type Block Polyether Nonionic Surfactants.

In many practical applications involving surfactants, achieving defoaming without affecting interfacial activity is a challenge. In this study, the antifoaming performance of REP-type block polymer nonionic surfactant C12EOmPOn was determined, and molecular dynamics simulation method was employed to investigate the molecular behaviors of surfactants at a gas/water interface, the detailed arrangement information of the different structural segments of the surfactant molecules and the inter-/intra-interactions between all the structural motifs in the interfacial layer were analyzed systematically, by which the antifoaming mechanisms of the surfactants were revealed. The results show that the EO and PO groups of REP-type polyether molecules are located in the aqueous phase near the interface, and the hydrophobic tails distribute separately, lying almost flat on the gas/water interface. The interaction between the same groups of EOs and POs is significantly stronger than with water. REP block polyethers with high polymerization degrees of EO and PO are more inclined to overlap into dense layers, resulting in the formation of aggregates resembling "oil lenses" spreading on the gas/water interface, which exerts a stronger antifoaming effect. This study provides a smart approach to obtaining efficient antifoaming performance at room temperature without adding other antifoam ingredients.

Erbium: YAG laser treatment efficacy and association with histologic features for giant congenital melanocytic nevi management.

BACKGROUND: Limited research exists on laser treatment of giant congenital melanocytic nevus (GCMN). OBJECTIVE: We sought to elucidate the efficacy of the Erbium: YAG laser on GCMN and the histologic factors associated with a positive clinical response. METHODS AND MATERIALS: Between 2019 and 2022, we enrolled 30 medium-to-giant CMN patients who underwent Er: YAG laser treatment. All patients received biopsies before and after laser treatments. Clinical efficacy outcomes were evaluated by the investigator's global assessment (IGA), 5-point scale of depigmentation, and Vancouver Scar Scale (VSS) scores at least 6 months after treatment. RESULTS: Of the 30 cases, 18 (60.0%) showed improvement (IGA score ≥3). Eight (26.7%) patients showed repigmentation. Eight (26.7%) patients developed hypertrophic scars. The average IGA, depigmentation, and VSS scores were 2.93, 3.57, and 3.20. The IGA score was higher (3.24 ± 1.18 vs. 2.22 ± 0.97, p = 0.031) and a lower repigmentation rate (14.3% vs. 55.6%, p = 0.032) was observed in the cases with Grenz zone. The IGA score was higher (3.33 ± 1.24 vs. 2.13 ± 0.89, p = 0.023) and the repigmentation rate was lower (11.1% vs. 50.0%, p = 0.034) also in the cases with the melanocytes nests with aggregation of melanin. Lesions with superficial ablation resulted in less hypertrophic scar formation than those with deep ablation (5.9% vs. 53.8%, p < 0.05). CONCLUSION: The Er: YAG laser demonstrated effective clinical results for GCMNs. The grenz zone and the melanocytes nests with aggregation of melanin are promising predictors of laser efficacy.

Multi-objective ecological restoration priority in China: Cost-benefit optimization in different ecological performance regimes based on planetary boundaries.

In the context of the "United Nations Decade on Ecosystem Restoration", optimizing spatiotemporal arrangements for ecological restoration is an important approach to enhancing overall socioecological benefits for sustainable development. However, against the background of ecological degradation caused by the human use of most natural resources at levels that have approached or exceeded the safe and sustainable boundaries of ecosystems, it is key to explain how to optimize ecological restoration by classified management and optimal total benefits. In response to these issues, we combined spatial heterogeneity and temporal dynamics at the national scale in China to construct five ecological performance regimes defined by indicators that use planetary boundaries and ecological pressures which served as the basis for prioritizing ecological restoration areas and implementing zoning control. By integrating habitat conservation, biodiversity, water supply, and restoration cost constraints, seven ecological restoration scenarios were simulated to optimize the spatial layout of ecological restoration projects (ERPs). The results indicated that the provinces with unsustainable freshwater use, climate change, and land use accounted for more than 25%, 66.7%, and 25%, respectively, of the total area. Only 30% of the provinces experienced a decrease in environmental pressure. Based on the ecological performance regimes, ERP sites spanning the past 20 years were identified, and more than 50% of the priority areas were clustered in regime areas with increased ecological stress. As the restoration area targets doubled (40%) from the baseline (20%), a multi-objective scenario presents a trade-off between expanded ERPs in areas with highly beneficial effects and minimal restoration costs. In conclusion, a reasonable classification and management regime is the basis for targeted restoration. Coordinating multiple objectives and costs in ecological restoration is the key to maximizing socio-ecological benefits. Our study offered new perspectives on systematic and sustainable planning for ecological restoration.

Multiple cancer cell types release LIF and Gal3 to hijack neural signals.

Neural signals can significantly influence cancer prognosis. However, how cancer cells may proactively modulate the nervous system to benefit their own survival is incompletely understood. In this study, we report an overlapping pattern of brain responses, including that in the paraventricular nucleus of the hypothalamus, in multiple mouse models of peripheral cancers. A multi-omic screening then identifies leukemia inhibitory factor (LIF) and galectin-3 (Gal3) as the key cytokines released by these cancer cell types to trigger brain activation. Importantly, increased plasma levels of these two cytokines are observed in patients with different cancers. We further demonstrate that pharmacologic or genetic blockage of cancer cell-derived LIF or Gal3 signaling abolishes the brain responses and strongly inhibits tumor growth. In addition, ablation of peripheral sympathetic actions can similarly restore antitumor immunity. These results have elucidated a novel, shared mechanism of multiple cancer cell types hijacking the nervous system to promote tumor progression.

Systematic Engineering of Saccharomyces cerevisiae for the De Novo Biosynthesis of Genistein and Glycosylation Derivatives.

Isoflavones are predominantly found in legumes and play roles in plant defense and prevention of estrogen-related diseases. Genistein is an important isoflavone backbone with various biological activities. In this paper, we describe how a cell factory that can de novo synthesize genistein was constructed in Saccharomyces cerevisiae. Different combinations of isoflavone synthase, cytochrome P450 reductase, and 2-hydroxyisoflavone dehydratase were tested, followed by pathway multicopy integration, to stably de novo synthesize genistein. The catalytic activity of isoflavone synthase was enhanced by heme supply and an increased intracellular NADPH/NADP+ ratio. Redistribution of the malonyl-CoA flow and balance of metabolic fluxes were achieved by adjusting the fatty acid synthesis pathway, yielding 23.33 mg/L genistein. Finally, isoflavone glycosyltransferases were introduced into S. cerevisiae, and the optimized strain produced 15.80 mg/L of genistin or 10.03 mg/L of genistein-8-C-glucoside. This is the first de novo synthesis of genistein-8-C-glucoside in S. cerevisiae, which is advantageous for the green industrial production of isoflavone compounds.

From waste to catalyst: Growth mechanisms of ZSM-5 zeolite from coal fly ash & rice husk ash and its performance as catalyst for tetracycline degradation in fenton-like oxidation.

Coal fly ash (CFA), an industrial solid waste, can be utilized to synthesize Zeolite Socony Mobil-5 (ZSM-5) by incorporating an external silica source. In this study, a series of ZSM-5 zeolites were synthesized using rice husk ash (RHA) as the primary silica source and CFA as the primary aluminum source under controlled hydrothermal reaction conditions, and the growth mechanism of ZSM-5 was investigated. The process of ZSM-5 growth was featured by the transformation of hyperpoly silico-aluminate in CFA and RHA into monomers. These monomers formed crystal nuclei connected in a five-membered ring structure under the influence of Tetrapropyl ammonium hydroxide (TPAOH). The surplus monomeric silica-aluminate grew on the nucleus surface due to the addition of the silica source within RHA (RHA-SiO2), ultimately resulting in the development of ZSM-5 zeolite. Characterization results demonstrated that RHA-SiO2 exhibited favorable physical and chemical properties during the ZSM-5 synthesis, with a crystallinity of 99.03%, a specific surface area of 321.19 m2/g, a weight loss of only 3.06% at 800 °C and a total acidity of 0.65 mmol/g. To evaluate the catalytic performance of ZSM-5, Fe/Cu-modified ZSM-5 was developed and used as the catalyst for the degradation of tetracycline (TC) in Fenton-like oxidation. The results indicated that Fe/Cu-ZSM-5 exhibited excellent activity and stability as the catalyst for TC degradation and mineralization. The maximum TC degradation rate reached 99.02% in 10 min and the TOC removal could be up to 69.32% in 2 h. Characterization results indicated that the Fe/Cu ions redox cycle accelerated the generation of active species (1O2 and ˙OH) in Fenton-like systems. The ZSM-5 zeolite synthesized from solid waste demonstrated superb stability and catalytic activity, leading to the effective removal of TC. Since real wastewater generally contains various pollutants, future research efforts should focused on multi-pollutant treatment.

Systems Metabolic Engineering of Saccharomyces cerevisiae for the High-Level Production of (2S)-Eriodictyol.

(2S)-eriodictyol (ERD) is a flavonoid widely found in citrus fruits, vegetables, and important medicinal plants with neuroprotective, cardioprotective, antidiabetic, and anti-obesity effects. However, the microbial synthesis of ERD is limited by complex metabolic pathways and often results in a low production performance. Here, we engineered Saccharomyces cerevisiae by fine-tuning the metabolism of the ERD synthesis pathway. The results showed that the ERD titer was effectively increased, and the intermediate metabolites levels were reduced. First, we successfully reconstructed the de novo synthesis pathway of p-coumaric acid in S. cerevisiae and fine-tuned the metabolic pathway using promoter engineering and terminator engineering for the high-level production of (2S)-naringenin. Subsequently, the synthesis of ERD was achieved by introducing the ThF3'H gene from Tricyrtis hirta. Finally, by multiplying the copy number of the ThF3'H gene, the production of ERD was further increased, reaching 132.08 mg L-1. Our work emphasizes the importance of regulating the metabolic balance to produce natural products in microbial cell factories.

Direct observation of intrinsic room-temperature ferroelectricity in 2D layered CuCrP2S6.

Multiferroic materials have ignited enormous interest owing to their co-existence of ferroelectricity and ferromagnetism, which hold substantial promise for advanced device applications. However, the size effect, dangling bonds, and interface effect in traditional multiferroics severely hinder their potential in nanoscale device applications. Recent theoretical and experimental studies have evidenced the possibility of realizing two-dimensional (2D) multiferroicity in van der Waals (vdW) layered CuCrP2S6. However, the incorporation of magnetic Cr ions in the ferroelectric framework leads to antiferroelectric and antiferromagnetic orderings, while macroscopic spontaneous polarization is always absent. Herein, we report the direct observation of robust out-of-plane ferroelectricity in 2D vdW CuCrP2S6 at room temperature with a comprehensive investigation. Modification of the ferroelectric polarization states in 2D CuCrP2S6 nanoflakes is experimentally demonstrated. Moreover, external electric field-induced polarization switching and hysteresis loops are obtained in CuCrP2S6 down to ~2.6 nm (4 layers). By using atomically resolved scanning transmission electron microscopy, we unveil the origin of the emerged room-temperature ferroelectricity in 2D CuCrP2S6. Our work can facilitate the development of multifunctional nanodevices and provide important insights into the nature of ferroelectric ordering of this 2D vdW material.

Coxsackievirus A6 2C protein antagonizes IFN-ß production through MDA5 and RIG-I depletion.

IMPORTANCE: Coxsackievirus A6 (CV-A6) is a major emerging pathogen associated with atypical hand, foot, and mouth disease and can cause serious complications such as encephalitis, acute flaccid paralysis, and neurorespiratory syndrome. Therefore, revealing the associated pathogenic mechanisms could benefit the control of CV-A6 infections. In this study, we demonstrate that the nonstructural 2CCV-A6 suppresses IFN-ß production, which supports CV-A6 infection. This is achieved by depleting RNA sensors such as melanoma differentiation-associated gene 5 and retinoic acid-inducible gene I (RIG-I) through the lysosomal pathway. Such a function is shared by 2CEV-A71 and 2CCV-B3 but not 2CCV-A16, suggesting the latter might have an alternative way to promote viral replication. This study broadens our understanding of enterovirus 2C protein regulation of the RIG-I-like receptor signaling pathway and reveals a novel mechanism by which CV-A6 and other enteroviruses evade the host innate immune response. These findings on 2C may provide new therapeutic targets for the development of effective inhibitors against CV-A6 and other enterovirus infections.

Research advances on impacts micro/nanoplastics and their carried pollutants on algae in aquatic ecosystems: A review.

The widespread presence of micro/nanoplastics in aquatic ecosystems has certainly affected ecosystem functions and food chains/webs. The impact is worsened by the accumulation of different pollutants and microorganisms on the surface of microplastics. At the tissue, cellular, and molecular levels, micro/nanoplastics and the contaminants they carry can cause damage to aquatic organisms. Problematically, the toxic mechanism of micro/nanoplastics and contaminants on aquatic organisms is still not fully understood. Algae are key organisms in the aquatic ecosystem, serving as primary producers. The investigation of the toxic effects and mechanisms of micro/nanoparticles and pollutants on algae can contribute to understanding the impact on the aquatic ecosystem. Micro/nanoplastics inhibit algal growth, reduce chlorophyll and photosynthesis, induce ultrastructural changes, and affect gene expression in algae. The effects of energy flow can alter the productivity of aquatic organisms. The type, particle size, and concentration of micro/nanoparticles can influence their toxic effects on algae. Although there has been some research on the toxic effects of algae, the limited information has led to a significant lack of understanding of the underlying mechanisms. This paper provides a comprehensive review of the interactions between micro/nanoplastics, pollutants, and algae. The effects of various factors on algal toxicity are also analyzed. In addition, this article discusses the combined effects of microplastics, global warming, and oil pollution on algae and aquatic ecosystems in the context of global change. This research is of great importance for predicting future environmental changes. This review offers a more comprehensive understanding of the interactions between microplastics/nanoplastics and algae, as well as their impact on the carbon cycle.

Are microplastics in aquaculture an undeniable driver in accelerating the spread of antibiotic resistance genes?

Aquaculture products have been a key source of protein in the human food supply. Contamination by microplastics and antibiotic resistance genes (ARGs) directly affects food quality and safety. Plastic fishing gear and the long-term misuse of antibiotics result in the persistent residue, migration, and spread of microplastics and ARGs in the aquaculture environment, causing in ecological imbalance and endangering human security. Microplastics can act as "petri dishes" for the reproduction, communication, and spread of ARGs, which adds an additional layer of complexity to the global issues surrounding microplastics and ARGs. Aquaculture has become an important source of microplastics and ARGs in natural waters. Accordingly, this paper mainly discusses the contribution of aquaculture to the presence of microplastics and ARGs in aquatic ecosystems. Microplastics and ARGs can (1) affect the production and quality of aquatic products; (2) influence the development and reproduction of aquatic organisms; and (3) accelerate the spread of resistant bacteria. How to eliminate microplastics and ARGs and block their transmission has become a worldwide problem. Actually, further research is required to understand the scale and scope of these effects.

Strategies adopted by Salmonella to survive in host: a review.

Salmonella, a Gram-negative bacterium that infects humans and animals, causes diseases ranging from gastroenteritis to severe systemic infections. Here, we discuss various strategies used by Salmonella against host cell defenses. Epithelial cell invasion largely depends on a Salmonella pathogenicity island (SPI)-1-encoded type 3 secretion system, a molecular syringe for injecting effector proteins directly into host cells. The internalization of Salmonella into macrophages is primarily driven by phagocytosis. After entering the host cell cytoplasm, Salmonella releases many effectors to achieve intracellular survival and replication using several secretion systems, primarily an SPI-2-encoded type 3 secretion system. Salmonella-containing vacuoles protect Salmonella from contacting bactericidal substances in epithelial cells and macrophages. Salmonella modulates the immunity, metabolism, cell cycle, and viability of host cells to expand its survival in the host, and the intracellular environment of Salmonella-infected cells promotes its virulence. This review provides insights into how Salmonella subverts host cell defenses for survival.

How to synergize ecological restoration to co-benefit the beneficial contributions of nature to people on the Qinghai-Tibet Plateau?

Understanding the magnitude and spatial distribution of ecological restoration requires a precise assessment of the beneficial contributions of nature to people. However, where the restoration areas should be located and whether the natural contribution of a compensation area can satisfy people's needs in the context of ecological degradation remain unclear. To address these issues, we selected the Qinghai-Tibet Plateau as the study areas, utilizing the offset portfolio analyzer and locator model to identify the compensation sites that offset the losses of ecosystem services and biodiversity resulting from ecological degradation. These compensation sites were developed through two offset types: restoration and protection. Then, based on the offset sites, we assessed nature's contribution to people (NCP) under the current status and future scenarios in terms of various aspects, including the habitat (NCP1), climate change (NCP4), and water quantity and flow regulation (NCP6). This study found that the area impacted by agricultural development was 7.15 × 105 ha, and the required compensation area was 5.5 × 106 ha under the current status. The ratio of the impacted area to the required area was approximately 7.0 in the future scenarios. The average habitat qualities were 0.14 and 0.30, while the mean NCP1 values were 2.69 and 0.51 in the protection and restoration offset sites, respectively. Moreover, based on the offset sites, the high-value contributions in NCP4 accounted for 18.64%-22.69% and 38.87%-46.17% of the total offset sites in terms of the restoration and protection offset types, respectively. Additionally, the estimated high-value contributions in NCP6 accounted for 58.35%-59.02% and 84.40%-95.86% of the total offset sites in the restoration and protection offset types, respectively. Our findings highlighted the significance of ecological restoration in showcasing the role of NCPs. These results could aid conservation managers in developing more targeted ecological strategies to enhance human well-being.

Are algae a promising ecofriendly approach to micro/nanoplastic remediation?

How to reduce microplastic pollution in aquatic ecosystem has become the focus of the global attention. The re-removal of microplastics of wastewater treatment plant (WWTP) effluent is gradually being put on the agenda. Recently, algae have been used as an ecofriendly remediation strategy for microplastic removal. Microplastics in sewage can be removed by algae through interception, capture, and entanglement, and can also form heterogeneous aggregates with algae, thereby reducing their free suspensions. Algae can recover nitrogen and carbon from wastewater and can be made into biochar, biofertilizers, and biofuels. However, problematically, this technology has been in the laboratory research stage, and existing research results cannot provide effective basis for its application. Microplastic removal via algae is influenced by wastewater flow rate, microplastic types, and pollutants. Microplastics are only physically fixed by algae, and ensuring that microplastics do not re-enter the environment during resource and capacity recovery is also a key factor limiting the implementation of this technology. The topic of this paper is to discuss the performance of the current tertiary wastewater treatment process - algae process to remove microplastics. Algae can remove nitrogen and phosphorus pollutants in sewage and remove microplastics at the same time, which can realize energy recovery and reduce ecological risks of the effluent. Although algae combined tertiary sewage treatment is a green technology for microplastic removal, its application still needs to be explored. The key challenges that need to be addressed, from single laboratory conditions to complex conditions, from small-scale testing to large-scale simulations, lie ahead of the application of this friendly technology.

Can microplastics and disinfectant resistance genes pose conceivable threats to water disinfection process?

Microplastic pollution in the environment has aroused widespread concerns, however, the potential environmental risks caused by excessive use of disinfectants are still unknown. Disinfectants with doses below the threshold can enhance the communication of resistance genes in pathogenic microorganisms, promoting the development and spread of antimicrobial activity. Problematically, the intensification of microplastic pollution and the increase of disinfectant consumption will become a key driving force for the growth of disinfectant resistance bacteria (DRB) and disinfectant resistance genes (DRGs) in the environment. Disinfection plays a crucial role in ensuring water safety, however, the presence of microplastics and DRGs seriously disturb the water disinfection process. Microplastics can reduce the concentration of disinfectant in the local environment around microorganisms and improve their tolerance. Microorganisms can improve their resistance to disinfectants or generate resistance genes via phenotypic adaptation, gene mutations, and horizontal gene transfer. However, very limited information is available on the impact of DRB and DRGs on disinfection process. In this paper, the contribution of microplastics to the migration and transmission of DRGs was analyzed. The challenges posed by the presence of microplastics and DRGs on conventional disinfection were thoroughly discussed. The knowledge gaps faced by relevant current research and further research priorities have been proposed in order to provide a scientific basis in the future.

Systematic Engineering of Saccharomyces cerevisiae Chassis for Efficient Flavonoid-7-O-Disaccharide Biosynthesis.

Flavonoids are an essential class of secondary metabolites found in plants and possess various nutritional, medicinal, and agricultural properties. However, the poor water solubility of flavonoid aglycones limits their potential applications. To overcome this issue, glycosylation is a promising approach for improving water solubility and bioavailability. In this study, we constructed a flavonoid-7-O-disaccharide biosynthetic pathway with flavonoid aglycones as substrates in Saccharomyces cerevisiae. Subsequently, through metabolic engineering and promoter strategies, we constructed a UDP-rhamnose regeneration system and optimized the UDP-glucose (UDPG) synthetic pathway. The optimized strain produced up to 131.3 mg/L eriocitrin. After this, the chassis cells were applied to other flavonoids, with substrates such as (2S)-naringenin, (2S)-hesperetin, diosmetin, and (2S)-eriodictyol, which resulted in the synthesis of 179.9 mg/L naringin, 276.6 mg/L hesperidin, 249.0 mg/L neohesperidin, 30.4 mg/L diosmin, and 100.7 mg/L neoeriocitrin. To the best of our knowledge, this is the first report on the biosynthesis of flavonoid-7-O-disaccharide.

Three-core photonic crystal fiber for the in-line measurement of full-polarization states by multi-core polarization interference theory.

In this Letter, we demonstrate and experimentally verify the application of three-core photonic crystal fiber (3C-PCF) for the in-line detection of fully polarized states. We prove the response of 3C-PCF to full-polarization states under multi-core polarization interference through experiments. The sensitivity at 1472 nm is 0.0273 nm/rad, and the linear response is better than 98.9% (the optimal operating wavelength can be designed in the range of 1470 to 1570 nm). With the advantages of an all-fiber integrated system, robustness, and wide wavelength coverage, our design holds great promise for facilitating fiber-optic-integrated polarization meters for optical fiber communication and biomedical diagnostic applications.

Constructed wetlands as neglected fixed source of microplastics and antibiotic resistance genes in natural water bodies?

The pollution status and the harm caused by microplastics and antibiotic resistance genes (ARGs) in aquatic ecosystems have been a growing concern. The presence of microplastics could accelerate the transfer and spread of ARGs. Before sewage reaches natural water bodies, microplastics and ARGs need to be eliminated through specific processes. Constructed wetlands are currently an effective and environmentally friendly wastewater treatment process. Research has shown significant effectiveness in removing microplastics and ARGs. Microplastics and ARGs can be removed through processes such as adsorption, capture, adhesion, and biodegradation. However, long-term continuous operation could lead to constructed wetlands becoming significant reservoirs of microplastics and ARGs. Inflow loads and seasonal variations in constructed wetlands may result in the reintroduction of persistent microplastics and ARGs into the receiving water body, establishing the constructed wetland as a continuous source of these pollutants in the receiving water body. The key to the widespread application of constructed wetlands lies in solving this challenging problem. Therefore, although constructed wetlands serve as a green strategy for removing microplastics and ARGs, there are still many gaps in our knowledge. Based on the current accumulation of microplastics and ARGs in constructed wetlands, this paper summarizes the removal of microplastics and ARGs in existing constructed wetlands and explores the interaction between them. Additionally, it proposes suggestions for optimizing the process and improving the reliability of monitoring microplastics and ARGs in sewage.

Microplastics in aquaculture systems: Occurrence, ecological threats and control strategies.

With the intensification of microplastic pollution globally, aquaculture environments also face risks of microplastic contamination through various pathways such as plastic fishing gear. Compared to wild aquatic products, cultured aquatic products are more susceptible to microplastic exposure through fishing tackle, thus assessing the impacts of microplastics on farmed species and human health. However, current research on microplastic pollution and its ecological effects in aquaculture environments still remains insufficient. This article comprehensively summarizes the pollution characteristics and interrelationships of microplastics in aquaculture environments. We analyzed the influence of microplastics on the sustainable development of the aquaculture industry. Then, the potential hazards of microplastics on pond ecosystems and consumer health were elucidated. The strategies for removing microplastics in aquaculture environments are also discussed. Finally, an outlook on the current challenge and the promising opportunities in this area was proposed. This review aims to evaluate the value of assessing microplastic pollution in aquaculture environments and provide guidance for the sustainable development of the aquaculture industry.