RESUMEN
The corn starch nanoparticles were prepared by incorporating three kinds of polyphenols, including quercetin, proanthocyanidins and tannin acid. The physicochemical and digestive properties of corn starch nanoparticles were researched. The quercetin showed a higher complexation index than proanthocyanidins and tannin acid when they complexed with corn starch. The mean size of corn starch quercetin, proanthocyanidins and tannin acid were 168.5 nm, 179.1 nm and 188.6 nm, respectively. XRD results indicated that all the corn starch-polyphenols complex showed V-type crystalline structure, the crystallinity of corn starch-quercetin complex was 19.31 %, which showed more formation of amylose-quercetin single helical formed than the other two starch-polyphenol complexes. In vitro digestion revealed that polyphenols could resist digestion and quercetin increased the content of resistant starch from 23.32 % to 35.24 % and polyphenols can form complexes with starch through hydrophobic interactions or hydrogen bonding. This study indicated the hydrophobic polyphenols had a more significant effect on the digestibility of corn starch. And the cell toxicity assessments demonstrated that all nanoparticles were nontoxic and biocompatible.
Asunto(s)
Proantocianidinas , Almidón , Almidón/química , Zea mays/química , Taninos , Proantocianidinas/química , Quercetina , Amilosa/química , PolifenolesRESUMEN
ETHNOPHARMACOLOGICAL RELEVANCE: Sanchen powder is a traditional Tibetan medicine comprising Bambusae Concretio Silicea, Carthami Flos, and Bovis Calculus Artifactus. Bambusae Concretio Silicea is the dried mass of secreted fluid in the stalks of Gramineae plants such as Bambusa textilis McClure or Schizostachyum chinense Rendle. Carthami Flos is the dried flower of Carthamus tinctorius L. in the Compositae plant. Bovis Calculus Artifactus is made from ox bile powder, cholic acid, hyodeoxycholic acid, taurine, bilirubin, cholesterol, and trace elements. Research has evidenced the antibacterial efficacy of Sanchen powder, albeit its active constituents for this effect are yet to be established. AIM OF THE STUDY: To investigate effective compounds, potential targets, and molecular mechanism of Sanchen powder for its antibacterial properties by using network pharmacology combined with in vitro validation, with the aims of observing the action of effective compounds in Sanchen powder and exploring new therapeutic strategies for antibacterial. MATERIALS AND METHODS: In this study, UPLC-Q-TOF-MS was utilized to identify the chemical composition in Sanchen powder and its blood-borne chemical ingredients post-oral intake. A network pharmacology analysis was used to establish the chemical compound in the blood following oral administration-target-disease network. The study aimed to identify antibacterial active ingredients, which were then subjected to molecular docking and pharmacodynamic experiments to verify their efficacy. RESULTS: The findings demonstrate that following oral administration, the blood contains seven key components of Sanchen powder, including bilirubin, glycochenodeoxycholic acid, glycocholic acid, taurocholic acid, phenylalanine, safflomin A, and tryptophan. Additionally, the network pharmacology and molecular docking study results indicate the potential antibacterial effects of bilirubin, glycocholic acid, and glycochenodeoxycholic acid. In vitro antibacterial experiments revealed that bilirubin, glycocholic acid, and glycochenodeoxycholic acid could restrict the growth of the Staphylococcus aureus cell membrane at a certain concentration. Moreover, they exhibited antibacterial effects on Staphylococcus aureus, Pseudomonas aeruginosa, Staphylococcus epidermidis, and Escherichia coli. CONCLUSIONS: Bilirubin, glycocholic acid, and glycochenodeoxycholic acid could be effective therapeutic ingredients for the antibacterial effects of Sanchen powder. These results offer a foundation for further clinical application and research on the antibacterial effect of Sanchen powder, a Traditional Tibetan Medicine.
Asunto(s)
Cálculos , Medicamentos Herbarios Chinos , Humanos , Medicina Tradicional Tibetana , Polvos , Simulación del Acoplamiento Molecular , Ácido Glicoquenodesoxicólico , Antibacterianos/farmacología , Bilirrubina , Medicamentos Herbarios Chinos/farmacologíaRESUMEN
Under a global carbon-neutralizing environment, renewable wood is a viable alternative to non-renewable resources due to its abundance and high specific strength. However, fast-growing wood is hard to be applied extensively due to low mechanical strength and poor dimensional stability and durability. In this study, epoxy-acrylic resin-modified wood was prepared by forming a functional monomer system with three monomers [glycidyl methacrylate (GMA), maleic anhydride (MAN), and polyethylene glycol-200-dimethylacrylic acid (PEGDMA)] and filling into the wood cell cavity. The results showed that in the case of an optimal monomer system of nGMA:nPEGDMA = 20:1 and an optimal MAN dosage of 6%, the conversion rate of monomers reached 98.01%, the cell cavity was evenly filled by the polymer, with the cell wall chemically bonded. Thus, a bonding strength of as high as 1.13 MPa, a bending strength of 112.6 MPa and an impact toughness of 74.85 KJ/m2 were applied to the modified wood, which presented excellent dimensional stability (720 h water absorption: 26%, and volume expansion ratio: 5.04%) and rot resistance (loss rates from white rot and brown rot: 3.05% and 0.67%). Additionally, polymer-modified wood also exhibited excellent wear resistance and heat stability. This study reports a novel approach for building new environmentally friendly wood with high strength and toughness and good structural stability and durability.
RESUMEN
Purpose: To construct and validate a precise and personalized predictive model for non-alcoholic fatty liver disease (NAFLD) to enhance NAFLD screening and healthcare administration. Patients and Methods: A total of 730 participants' clinical information and outcome measurements were gathered and randomly divided into training and validation sets in a ratio of 3:7. Using the least absolute shrinkage and selection operator (LASSO) regression and multiple logistic regression, a nomogram was established to select risk predictor variables. The NAFLD prediction model was validated through the receiver operating characteristic (ROC) curve, calibration plot, and decision curve analysis (DCA). Results: After random grouping, the cohort comprised 517 in the training set and 213 in the validation set. The prediction model employed nine of the 20 selected variables, namely gender, hypertension, waist circumference, body mass index, blood platelet, triglycerides, high-density lipoprotein cholesterol, plasma glucose, and alanine aminotransferase. ROC curve analysis yielded an area under the curve values of 0.877 (95% Confidence Interval [CI]: 0.848-0.907) for the training set and 0.871 (95% CI: 0.825-0.917) for the validation set. Optimal critical values were determined as 0.472 (0.786, 0.825) in the training set and 0.457 (0.743, 0.839) in the validation set. Calibration curves for both sets showed proximity to the ideal diagonal, with P-values of 0.972 and 0.370 for the training and validation sets, respectively (P > 0.05). DCA indicated favorable clinical applicability of the model. Conclusion: We constructed a nomogram model that could complement traditional NAFLD detection methods, aiding in individualized risk assessment for NAFLD.
RESUMEN
The reduced antioxidant capacity of trans-resveratrol (Res) than the second generation of Res, namely pterostilbene (Pte), severely prohibits its in-depth intriguing radical-scavenging applications in food formulations. Herein, a unique chemical structure-dependent strategy was proposed to specifically enhance the radical scavenging activity of Res over Pte, relying on the two more hydroxyl groups on the A-benzene ring of Res, thus facilitating its binding with lactoferrin (LF) to form stable complexes through more hydrogen bonds. We prepared LF-Res and LF-Pte complexes, revealed their binding mechanisms by multispectral analysis and molecular docking/dynamics simulations, further evaluated their antioxidant properties via ABTS and DPPH assays and a model of inhibiting apple browning, eventually elucidated their structure-binding-property relationships. This contribution offers a new approach to restore the antioxidant capability of Res, also paves the way to precisely regulate the fascinating bioactivities of hydrophobic compounds by protein-binding in a chemical structure-, especially hydroxyl group-dependent manner.
Asunto(s)
Antioxidantes , Lactoferrina , Antioxidantes/química , Resveratrol , Simulación del Acoplamiento MolecularRESUMEN
Hybrid aluminum dialkylphosphinates were synthesized from mixed diethyl-, ethylisobutyl-, and diisobutylphosphinates and Al3+ in water. The XRD, DSC, and TGA results of these Al phosphinates established that phosphinate ligands are randomly distributed in the species. The thermal and thermoxidative stabilities of the hybrid phosphinates were easily adjustable by varying the ratio of phosphinate ligands, a desirable feature for efficient flame retardants. The hybrid aluminum dialkylphosphinates with a relatively low ratio of diethylphosphinate demonstrated higher efficiency than Al diethylphosphinate and Al diisobutylphosphinate in flame-retarding polyamide 66. Detailed investigations on the thermal and thermoxidative stabilities of Al dialkylphosphinates and the morphologies of char obtained in UL-94 tests revealed that timely vaporization of degradation products of hybrid dialkylphosphinates at a temperature which closely matches the degradation temperature of polyamides and their ability to promote char formation of polyamides are two key factors which contribute to the excellent performance of hybrid aluminum dialkylphosphinates.