Pushing the thinness limit of silver films for flexible optoelectronic devices via ion-beam thinning-back process.

Reducing the silver film to 10 nm theoretically allows higher transparency but in practice leads to degraded transparency and electrical conductivity because the ultrathin film tends to be discontinuous. Herein, we developed a thinning-back process to address this dilemma, in which silver film is first deposited to a larger thickness with high continuity and then thinned back to a reduced thickness with an ultrasmooth surface, both implemented by a flood ion beam. Contributed by the shallow implantation of silver atoms into the substrate during deposition, the thinness of silver films down to 4.5 nm can be obtained, thinner than ever before. The atomic-level surface smooth permits excellent visible transparency, electrical conductivity, and the lowest haze among all existing transparent conductors. Moreover, the ultrathin silver film exhibits the unique robustness of mechanical flexibility. Therefore, the ion-beam thinning-back process presents a promising solution towards the excellent transparent conductor for flexible optoelectronic devices.

Metal-Free Amino(hetero)arylation and Aminosulfonylation of Alkenes Enabled by Photoinduced Energy Transfer.

ß-(Hetero)arylethylamines are privileged structural motifs found in many high-value organic molecules, including pharmaceuticals and natural products. To construct these important molecular skeletons, previous methods are mainly achieved by amino(hetero)arylation reaction with the aid of transition metals and preactivated substrates. Herein, we report a metal-free and photoinduced intermolecular amino(hetero)arylation reaction for the single-step installation of both (hetero)aryl and iminyl groups across alkenes in an efficient and regioselective manner. This method shows broad scope (up to 124 examples) and excellent tolerance of various olefins─from the simplest ethylene to complex multisubstituted alkenes can all participate in the reaction. Furthermore, aminosulfonylation of alkenes can be also conducted in the presence of sodium bisulfite as the SO2 source.

Reversibly reconfigurable GSST metasurface for broadband beam steering and achromatic focusing in the long-wave infrared.

Active optical metasurfaces promise compact, lightweight, and energy-efficient optical systems with unprecedented performance. Chalcogenide phase-change material Ge2Sb2Se4Te1 (GSST) has shown tremendous advantages in the design of mid-infrared active metasurfaces. However, most of the GSST-based active metasurfaces can only work efficiently within a narrow frequency range. Furthermore, their design flexibility and reversible switching capability are severely restricted by the melting of GSST during re-amorphization. Here, we propose broadband, reversibly tunable, GSST-based transmissive metasurfaces operating in the long-wave infrared spectrum, where the GSST micro-rods are cladded by refractory materials. To accurately evaluate the performance of the proposed metasurfaces, two figures of merits are defined: FOMΦ for the evaluation of wavefront matching, and FOMop for the assessment of the overall performance incorporating both wavefront modulation efficiency and switching contrast ratio. For the proof of concept, two meta-devices are numerically presented: a multifunctional deflector that offers continuous beam steering and long-wave pass filtering simultaneously, and a large-area (1 cm × 1 cm) broadband (11-14 µm) varifocal metalens with the ability of achromatic imaging (12.5-13.5 µm). In particular, the metalens features high FOMop values over 16 dB in the achromatic band, with the average focusing efficiency approximating 70% (60%) in amorphous (crystalline) state and a spectral switching contrast ratio surpassing 25 dB. Our design scheme provides an additional degree of freedom for dynamic modulation and offers a novel approach for achieving high-efficiency mid-infrared compact optical devices.

Wafer-Level Highly Dense Metallic Nanopillar-Enabled High-Performance SERS Substrates for Molecular Detection.

Seeking sensitive, large-scale, and low-cost substrates is highly important for practical applications of surface-enhanced Raman scattering (SERS) technology. Noble metallic plasmonic nanostructures with dense hot spots are considered an effective construction to enable sensitive, uniform, and stable SERS performance and thus have attracted wide attention in recent years. In this work, we reported a simple fabrication method to achieve wafer-scale ultradense tilted and staggered plasmonic metallic nanopillars filled with numerous nanogaps (hot spots). By adjusting the etching time of the PMMA (polymethyl methacrylate) layer, the optimal SERS substrate with the densest metallic nanopillars was obtained, which possessed a detection limit down to 10-13 M by using crystal violet as the detected molecules and exhibited excellent reproducibility and long-term stability. Furthermore, the proposed fabrication approach was further used to prepare flexible substrates; for example, a SERS flexible substrate was proven to be an ideal platform for analyzing low-concentration pesticide residues on curved fruit surfaces with significantly enhanced sensitivity. This type of SERS substrate possesses potential in real-life applications as low-cost and high-performance sensors.

Suspended 3D metallic dimers with sub-10 nm gap for high-sensitive SERS detection.

The suspended metallic nanostructures with tiny gaps have certain advantages in surface-enhanced Raman scattering (SERS) due to the coaction of the tiny metallic nanogaps and the substrate-decoupled electromagnetism resonant modes. In this study, we used the lithographic HSQ/PMMA electron-beam bilayer resist exposure combined with a deposition-induced nanogap-narrowing process to define elevated suspended metallic nanodimers with tiny gaps for surface-enhanced Raman spectroscopy detection. By adjusting the deposited metal thickness, the metallic dimers with sub-10 nm gaps can be reliably obtained. These dimers with tunable nanogaps successfully served as excellent SERS substrates, exhibiting remarkable high-sensitivity detection ability for crystal violet molecules. Systematic experiments and simulations were conducted to explain the origin of the improved SERS performance. The results showed that the 3D elevated suspended metallic dimers could achieve a higher SERS enhancement factor than the metallic dimers on HSQ pillars and a common Si substrate, demonstrating that this kind of suspended metallic dimer is a promising route for high-sensitive SERS detection and other plasmonic applications.

General Solution to the Preparation of ß-Thiolated/Selenolated Amino Acids Via Visible Light Catalyzed Asymmetric Giese Reaction.

Thiolated/selenolated amino acids are irreplaceable despite their rare abundance in proteins. They play critical roles in regulating the conformation and function of proteins and peptide design as well as bioconjugation. Furthermore, ß-thiolated/selenolated amino acids are important motifs in native chemical ligation-dechalcogenation strategy for protein synthesis. However, a universal method to access enantiopure ß-thiolated/selenolated amino acids has not been reported. Herein, we developed a practical strategy for the preparation of a variety of enantiopure ß-thiolated/selenolated amino acids via photoredox-catalyzed Giese reaction.

Dielectric metalens for miniaturized imaging systems: progress and challenges.

Lightweight, miniaturized optical imaging systems are vastly anticipated in these fields of aerospace exploration, industrial vision, consumer electronics, and medical imaging. However, conventional optical techniques are intricate to downscale as refractive lenses mostly rely on phase accumulation. Metalens, composed of subwavelength nanostructures that locally control light waves, offers a disruptive path for small-scale imaging systems. Recent advances in the design and nanofabrication of dielectric metalenses have led to some high-performance practical optical systems. This review outlines the exciting developments in the aforementioned area whilst highlighting the challenges of using dielectric metalenses to replace conventional optics in miniature optical systems. After a brief introduction to the fundamental physics of dielectric metalenses, the progress and challenges in terms of the typical performances are introduced. The supplementary discussion on the common challenges hindering further development is also presented, including the limitations of the conventional design methods, difficulties in scaling up, and device integration. Furthermore, the potential approaches to address the existing challenges are also deliberated.

Prevalence of feline calicivirus and the distribution of serum neutralizing antibody against isolate strains in cats of Hangzhou, China.

BACKGROUND: Feline calicivirus (FCV) is a common pathogen of felids, and FCV vaccination is regularly practiced. The genetic variability and antigenic diversity of FCV hinder the effective control and prevention of infection by vaccination. Improved knowledge of the epidemiological characteristics of FCV should assist in the development of more effective vaccines. OBJECTIVES: This study aims to determine the prevalence of FCV in a population of cats with FCV-suspected clinical signs in Hangzhou and to demonstrate the antigenic and genetic relationships between vaccine status and representative isolated FCV strains. METHODS: Cats (n = 516) from Hangzhou were investigated between 2018 and 2020. The association between risk factors and FCV infection was assessed. Phylogenetic analyses based on a capsid coding sequence were performed to identify the genetic relationships between strains. In vitro virus neutralization tests were used to assess antibody levels against isolated FCV strains in client-owned cats. RESULTS: The FCV-positive rate of the examined cats was 43.0%. Risk factors significantly associated with FCV infection were vaccination status and oral symptoms. Phylogenetic analysis revealed a radial phylogeny with no evidence of temporal or countrywide clusters. There was a significant difference in the distribution of serum antibody titers between vaccinated and unvaccinated cats. CONCLUSIONS: This study revealed a high prevalence and genetic diversity of FCV in Hangzhou. The results indicate that the efficacy of FCV vaccination is unsatisfactory. More comprehensive and refined vaccination protocols are an urgent and unmet need.

Fabrication of single-nanometer metallic gaps via spontaneous nanoscale dewetting.

Ultrasmall metallic nanogaps are of great significance for wide applications in various nanodevices. However, it is challenging to fabricate ultrasmall metallic nanogaps by using common lithographic methods due to the limited resolution. In this work, we establish an effective approach for successful formation of ultrasmall metallic nanogaps based on the spontaneous nanoscale dewetting effect during metal deposition. By varying the initial opening size of the exposed resist template, the influence of dewetting behavior could be adjusted and tiny metallic nanogaps can be obtained. We demonstrate that this method is effective to fabricate diverse sub-10 nm gaps in silver nanostructures. Based on this fabrication concept, even sub-5 nm metallic gaps were obtained. SERS measurements were performed to show the molecular detection capability of the fabricated Ag nanogaps. This approach is a promising candidate for sub-10 nm metallic gaps fabrication, thus possessing potential applications in nanoelectronics, nanoplasmonics, and nano-optoelectronics.

NLRP3 inflammasome inhibitor INF39 attenuated NLRP3 assembly in macrophages.

INF39 is a nontoxic, irreversible, acrylate-based NLRP3 inhibitor and a further optimization of ethyl 2-((2-chlorophenyl) hydroxyl) methyl) acrylate (INF4E). However, the detail mechanism and the direct target of its anti-inflammatory activity is not clear. Here, we show that INF39 is a specific inhibitor for NLRP3 inflammasome activation. INF39 specifically suppresses NLRP3 activation but not the NLRC4 or AIM2 inflammasomes. INF39 has no effect on K+ efflux, ROS generation or mitochondrial membrane potential, which are the upstream events of NLRP3 inflammasome activation. In addition, INF39 has no direct inhibitory effect on GSDMD, which is the downstream event of inflammasomes. More importantly, INF39 inhibits the interaction of NEK7-NLRP3, and subsequently inhibits interaction of NLRP3-NLRP3, NLRP3-ASC, ASC oligomerization and speckle formation. Altogether, our study unveils a deeper anti-inflammatory mechanism for INF39 and suggests it could serve as a lead for developing novel therapeutics combating NLRP3-driven diseases.

Plasmonic metal nanostructures with extremely small features: new effects, fabrication and applications.

Surface plasmons in metals promise many fascinating properties and applications in optics, sensing, photonics and nonlinear fields. Plasmonic nanostructures with extremely small features especially demonstrate amazing new effects as the feature sizes scale down to the sub-nanometer scale, such as quantum size effects, quantum tunneling, spill-out of electrons and nonlocal states etc. The unusual physical, optical and photo-electronic properties observed in metallic structures with extreme feature sizes enable their unique applications in electromagnetic field focusing, spectra enhancing, imaging, quantum photonics, etc. In this review, we focus on the new effects, fabrication and applications of plasmonic metal nanostructures with extremely small features. For simplicity and consistency, we will focus our topic on the plasmonic metal nanostructures with feature sizes of sub-nanometers. Subsequently, we discussed four main and typical plasmonic metal nanostructures with extremely small features, including: (1) ultra-sharp plasmonic metal nanotips; (2) ultra-thin plasmonic metal films; (3) ultra-small plasmonic metal particles and (4) ultra-small plasmonic metal nanogaps. Additionally, the corresponding fascinating new effects (quantum nonlinear, non-locality, quantum size effect and quantum tunneling), applications (spectral enhancement, high-order harmonic wave generation, sensing and terahertz wave detection) and reliable fabrication methods will also be discussed. We end the discussion with a brief summary and outlook of the main challenges and possible breakthroughs in the field. We hope our discussion can inspire the broader design, fabrication and application of plasmonic metal nanostructures with extremely small feature sizes in the future.

Enhancing Plasmonic Spectral Tunability with Anomalous Material Dispersion.

The field confinement of plasmonic systems enables spectral tunability under structural variations or environmental perturbations, which is the principle for various applications including nanorulers, sensors, and color displays. Here, we propose and demonstrate that materials with anomalous dispersion, such as Ge in the visible, improve spectral tunability. We introduce our proposal with a semianalytical guided mode picture. Using Ge-based film (Ag/Au)-coupled gap plasmon resonators, we implement two architectures and demonstrate the improved tunability with single-particle dark-field scattering, ensemble reflection, and color generation. We observe three-fold enhancement of tunability with Ge nanodisks compared with that of Si, a normal-dispersion material in the visible. The structural color generation of large array systems, made of inversely fabricated Ge-Ag resonators, exhibits a wide gamut. Our results introduce anomalous material dispersion as an extra degree of freedom to engineer the spectral tunability of plasmonic systems, especially relevant for actively tunable plasmonics and metasurfaces.

Stereoselective and Divergent Construction of ß-Thiolated/Selenolated Amino Acids via Photoredox-Catalyzed Asymmetric Giese Reaction.

Sulfur and selenium occupy a distinguished position in biology owing to their redox activities, high nucleophilicity, and acyl transfer capabilities. Thiolated/selenolated amino acids, including cysteine, selenocysteine, and their derivatives, play critical roles in regulating the conformation and function of proteins and serve as an important motif for peptide design and bioconjugation. Unfortunately, a general and concise method to attain enantiopure ß-thiolated/selenolated amino acids remains an unsolved problem. Herein, we present a photoredox-catalyzed asymmetric method for the preparation of enantiopure ß-thiolated/selenolated amino acids using a simple chiral auxiliary, which controls the diastereoselectivity of the key alkylation step and acts as an orthogonal protecting group in the subsequent peptide synthesis. Our protocol can be used to prepare a wide range of ß-thiolated/selenolated amino acids on a gram scale, which would otherwise be difficult to obtain using conventional methods. The effect of our chemistry was further highlighted and validated through the preparation of a series of peptidyl thiol/selenol analogues, including cytochrome c oxidase subunit protein 7C and oxytocin.

Biochemical reference intervals for homing pigeons in China.

As indicators of diseases, blood biochemical values play a crucial role in clinical practice and assessments of animals' health condition. The rising population of homing pigeons in China has prompted needs for reliable blood biochemical reference intervals. Therefore, the aim of this study was to establish biochemical reference intervals for homing pigeons. Heparinized whole blood samples obtained from 77 clinically healthy pigeons were analyzed by Zoetis Abaxis VetScan VS2 with VetScan Avian/Reptilian Profile Plus Rotor. Reference intervals for pigeons were computed by Excel with Reference Value Advisor V2.1. The statistical analysis performed by SPSS program revealed correlations between biochemical analytes. Effects of sex and age and validity of published reference intervals were also discussed. The present results serve as a useful guide to broaden the scope of pigeon breeding industry.

Huge field enhancement and high transmittance enabled by terahertz bow-tie aperture arrays: a simulation study.

Sub-wavelength aperture arrays featuring small gaps have an extraordinary significance in enhancing the interactions of terahertz (THz) waves with matters. But it is difficult to obtain large light-substance interaction enhancement and high optical response signal detection capabilities at the same time. Here, we propose a simple terahertz bow-tie aperture arrays structure with a large electric field enhancement factor and high transmittance at the same time. The field enhancement factor can reach a high value of 1.9×104 and the transmission coefficient of around 0.8 (the corresponding normalized-to-area transmittance is about 14.3) at 0.04 µm feature gap simultaneously. The systematic simulation results show that the designed structure can enhance the intensity of electromagnetic hotspot by continuously reducing the feature gap size without affecting the intensity of the transmittance. We also visually displayed the significant advantages of extremely strong electromagnetic hot spots in local terahertz refractive index detection, which provides a potential platform and simple strategy for enhanced THz spectral detection.

Ginsenoside Rg3 suppresses the NLRP3 inflammasome activation through inhibition of its assembly.

Ginsenoside Rg3 is one of the main constituents of Panax ginseng. Compelling evidence has demonstrated that ginsenoside Rg3 is capable of inhibiting inflammation. However, the mechanism mediating its anti-inflammatory effects remain unclear. Here we show that ginsenoside Rg3 blocks IL-1ß secretion and caspase-1 activation through inhibiting LPS priming and the NLRP3 inflammasome activation in human and mouse macrophages. Rg3 specifically inhibits activation of NLRP3 but not the NLRC4 or AIM2 inflammasomes. In addition, Rg3 has no effect on upstream regulation of NLRP3 inflammasome, such as K+ efflux, ROS production, or mitochondrial membrane potential. Mechanistically, Rg3 abrogates NEK7-NLRP3 interaction, and subsequently inhibits NLRP3-ASC interaction, ASC oligomerization, and speckle formation. More importantly, Rg3 can reduce IL-1ß secretion induced by LPS in mice and protect mice from lethal endotoxic shock. Thus, our findings reveal an anti-inflammatory mechanism for Rg3 and suggest its potential use in NLRP3-driven diseases.

Development of biodegradable bioactive glass ceramics by DLP printed containing EPCs/BMSCs for bone tissue engineering of rabbit mandible defects.

Bioactive glass ceramics have excellent biocompatibility and osteoconductivity; and can form direct chemical bonds with human bones; thus, these ceramic are considered as "Smart" materials. In this study, we develop a new type of bioactive glass ceramic (AP40mod) as a scaffold containing Endothelial progenitor cells (EPCs) and Mesenchymal stem cells (BMSCs) to repair critical-sized bone defects in rabbit mandibles. For in vitro experiments: AP40mod was prepared by Dgital light processing (DLP) system and the optimal ratio of EPCs/BMSCs was screened by analyzing cell proliferation and ALP activity, as well as the influence of genes related to osteogenesis and angiogenesis by direct inoculation into scaffolds. The scaffold showed suitable mechanical properties, with a Bending strength 52.7 MPa and a good biological activity. Additionally, when EPCs/BMSCs ratio were combined at a ratio of 2:1 with AP40mod, the ALP activity, osteogenesis and angiogenesis were significantly increased. For in vivo experiments: application of AP40mod/EPCs/BMSCs (after 7 days of in vitro spin culture) to repair and reconstruct critical-sized mandible defect in rabbit showed that all scaffolds were successfully accurately implanted into the defect area. As revealed by macroscopically and CT at the end of 9 months, defects in the AP40mod/EPCs/BMSCs group were nearly completely covered by normal bone and the degradation rate was 29.9% compared to 20.1% in the AP40mod group by the 3D reconstruction. As revealed by HE and Masson staining analyses, newly formed blood vessels, bone marrow and collagen maturity were significantly increased in the AP40mod/EPCs/BMSCs group compared to those in the AP40mod group. We directly inoculated cells on the novel material to screen for the best inoculation ratio. It is concluded that the AP40mod combination of EPCs/BMSCs is a promising approach for repairing and reconstructing large load bearing bone defect.