Thermionic microwave gun for terahertz and synchrotron light sources.

Conventional thermionic microwave and radio frequency (RF) guns can offer high average beam current, which is important for synchrotron light and terahertz (THz) radiation source facilities, as well as for industrial applications. For example, the Advanced Photon Source at Argonne National Laboratory is a national synchrotron-radiation light source research facility that utilizes thermionic RF guns. However, these existing thermionic guns are bulky, difficult to handle and install, easily detuned, very sensitive to thermal expansion, and due for a major upgrade and replacement. In this paper, we present the design of a new, more stable, and reliable gun with optimized electromagnetic performance, improved thermal engineering, and a more robust cathode mounting technique, which is a critical step to improve the performance of existing and future light sources, industrial accelerators, and electron beam-driven THz sources. We will also present a fabricated gun prototype and show results of high-power and beam tests.

Observation of High Transformer Ratio of Shaped Bunch Generated by an Emittance-Exchange Beam Line.

Collinear wakefield acceleration has been long established as a method capable of generating ultrahigh acceleration gradients. Because of the success on this front, recently, more efforts have shifted towards developing methods to raise the transformer ratio (TR). This figure of merit is defined as the ratio of the peak acceleration field behind the drive bunch to the peak deceleration field inside the drive bunch. TR is always less than 2 for temporally symmetric drive bunch distributions and therefore recent efforts have focused on generating asymmetric distributions to overcome this limitation. In this Letter, we report on using the emittance-exchange method to generate a shaped drive bunch to experimentally demonstrate a TR≈5 in a dielectric wakefield accelerator.

Precision Control of the Electron Longitudinal Bunch Shape Using an Emittance-Exchange Beam Line.

We report on the experimental generation of relativistic electron bunches with a tunable longitudinal bunch shape. A longitudinal bunch-shaping (LBS) beam line, consisting of a transverse mask followed by a transverse-to-longitudinal emittance exchange (EEX) beam line, is used to tailor the longitudinal bunch shape (or current profile) of the electron bunch. The mask shapes the bunch's horizontal profile, and the EEX beam line converts it to a corresponding longitudinal profile. The Argonne wakefield accelerator rf photoinjector delivers electron bunches into a LBS beam line to generate a variety of longitudinal bunch shapes. The quality of the longitudinal bunch shape is limited by various perturbations in the exchange process. We develop a simple method, based on the incident slope of the bunch, to significantly suppress the perturbations.

Free-electron laser design for four-wave mixing experiments with soft-x-ray pulses.

We present the design of a single-pass free-electron laser amplifier suitable for enabling four-wave mixing x-ray spectroscopic investigations. The production of longitudinally coherent, single-spike pulses of light from a single electron beam in this scenario relies on a process of selective amplification where a strong undulator taper compensates for a large energy chirp only for a short region of the electron beam. This proposed scheme offers improved flexibility of operation and allows for independent control of the color, timing, and angle of incidence of the individual pulses of light at an end user station. Detailed numerical simulations are used to illustrate the more impressive characteristics of this scheme.

Experimental demonstration of energy-chirp compensation by a tunable dielectric-based structure.

A tunable energy-chirp compensator was used to remove a correlated energy chirp from the 60-MeV beam at the Brookhaven National Laboratory Accelerator Test Facility. The compensator operates through the interaction of the wakefield of the electron bunch with itself and consists of a planar structure comprised of two alumina bars with copper-plated backs separated by an adjustable beam aperture. By changing the gap size, the correlated energy chirp of the electron bunch was completely removed. Calculations show that this device, properly scaled to account for the electron bunch charge and length, can be used to remove residual correlated energy spread at the end of the linacs used for free-electron lasers. The experimental results are shown to be in good agreement with numerical simulations. Application of this technique can significantly simplify linac design and improve free-electron lasers performance.

Subpicosecond bunch train production for a tunable mJ level THz source.

A strong energy modulation in an electron bunch passing through a dielectric-lined waveguide was recently demonstrated in Antipov et al., Phys. Rev. Lett. 108, 144801 (2012). In this Letter, we demonstrate a successful conversion of this energy modulation into a beam density modulation, and the formation of a series of microbunches with a subpicosecond periodicity by means of magnetic optics (chicane). A strong coherent transition radiation signal produced by the microbunches is obtained and the tunability of its carrier frequency in the 0.68-0.9 THz range by regulating the energy chirp in the incoming electron bunch is demonstrated using infrared interferometry. A tabletop, compact, tunable, and narrowband source of intense THz radiation based on this technology is proposed.

Experimental observation of energy modulation in electron beams passing through terahertz dielectric wakefield structures.

We report the observation of a strong wakefield induced energy modulation in an energy-chirped electron bunch passing through a dielectric-lined waveguide. This modulation can be effectively converted into a spatial modulation forming microbunches with a periodicity of 0.5-1 ps and, hence, capable of driving coherent terahertz radiation. The experimental results agree well with theoretical predictions.

Laser seeding of the storage-ring microbunching instability for high-power coherent terahertz radiation.

We report the first observation of laser seeding of the storage-ring microbunching instability. Above a threshold bunch current, the interaction of the beam and its radiation results in a coherent instability, observed as a series of stochastic bursts of coherent synchrotron radiation (CSR) at terahertz frequencies initiated by fluctuations in the beam density. We have observed that this effect can be seeded by imprinting an initial density modulation on the beam by means of laser "slicing." In such a situation, most of the bursts of CSR become synchronous with the pulses of the modulating laser and their average intensity scales exponentially with the current per bunch. We present detailed experimental observations of the seeding effect and a model of the phenomenon. This seeding mechanism also creates potential applications as a high-power source of CSR at terahertz frequencies.

Tailored terahertz pulses from a laser-modulated electron beam.

We present a new method to generate steady and tunable, coherent, broadband terahertz radiation from a relativistic electron beam modulated by a femtosecond laser. We have demonstrated this in the electron storage ring at the Advanced Light Source. Interaction of an electron beam with a femtosecond laser pulse copropagating through a wiggler modulates the electron energies within a short slice of the electron bunch with about the same duration of the laser pulse. The bunch develops a longitudinal density perturbation due to the dispersion of electron trajectories, and the resulting hole emits short pulses of temporally and spatially coherent terahertz pulses synchronized to the laser. We present measurements of the intensity and spectra of these pulses. This technique allows tremendous flexibility in shaping the terahertz pulse by appropriate modulation of the laser pulse.