Cascade and Ultrafast Artificial Antioxidases Alleviate Inflammation and Bone Resorption in Periodontitis.

Periodontitis, one of the most common, challenging, and rapidly expanding oral diseases, is an oxidative stress-related disease caused by excessive reactive oxygen species (ROS) production. Developing ROS-scavenging materials to regulate the periodontium microenvironments is essential for treating periodontitis. Here, we report on creating cobalt oxide-supported Ir (CoO-Ir) as a cascade and ultrafast artificial antioxidase to alleviate local tissue inflammation and bone resorption in periodontitis. It is demonstrated that the Ir nanoclusters are uniformly supported on the CoO lattice, and there is stable chemical coupling and strong charge transfer from Co to Ir sites. Benefiting from its structural advantages, CoO-Ir presents cascade and ultrafast superoxide dismutase-catalase-like catalytic activities. Notably, it displays distinctly increased Vmax (76.249 mg L-1 min-1) and turnover number (2.736 s-1) when eliminating H2O2, which surpasses most of the by-far-reported artificial enzymes. Consequently, the CoO-Ir not only provides efficient cellular protection from ROS attack but also promotes osteogenetic differentiation in vitro. Furthermore, CoO-Ir can efficiently combat periodontitis by inhibiting inflammation-induced tissue destruction and promoting osteogenic regeneration. We believe that this report will shed meaningful light on creating cascade and ultrafast artificial antioxidases and offer an effective strategy to combat tissue inflammation and osteogenic resorption in oxidative stress-related diseases.

Loss of function of SSIIIa and SSIIIb coordinately confers high RS content in cooked rice.

The sedentary lifestyle and refined food consumption significantly lead to obesity, type 2 diabetes, and related complications, which have become one of the major threats to global health. This incidence could be potentially reduced by daily foods rich in resistant starch (RS). However, it remains a challenge to breed high-RS rice varieties. Here, we reported a high-RS mutant rs4 with an RS content of ~10.8% in cooked rice. The genetic study revealed that the loss-of-function SSIIIb and SSIIIa together with a strong Wx allele in the background collaboratively contributed to the high-RS phenotype of the rs4 mutant. The increased RS contents in ssIIIa and ssIIIa ssIIIb mutants were associated with the increased amylose and lipid contents. SSIIIb and SSIIIa proteins were functionally redundant, whereas SSIIIb mainly functioned in leaves and SSIIIa largely in endosperm owing to their divergent tissue-specific expression patterns. Furthermore, we found that SSIII experienced duplication in different cereals, of which one SSIII paralog was mainly expressed in leaves and another in the endosperm. SSII but not SSIV showed a similar evolutionary pattern to SSIII. The copies of endosperm-expressed SSIII and SSII were associated with high total starch contents and low RS levels in the seeds of tested cereals, compared with low starch contents and high RS levels in tested dicots. These results provided critical genetic resources for breeding high-RS rice cultivars, and the evolutionary features of these genes may facilitate to generate high-RS varieties in different cereals.

Modulating Electronic Environment of Ru Nanoclusters via Local Charge Transfer for Accelerating Alkaline Water Electrolysis.

Compared to platinum catalysts, ruthenium (Ru) is disclosed as a promising alternative for alkaline water electrolysis due to its similar hydrogen adsorption energy and relatively lower water dissociation barrier. However, in the challenging alkaline media, the dissatisfied Volmer step during water dissociation of Ru metal prohibits its practical applications. Here, a new pathway to modulate the electronic environment of Ru catalysts via a local charge transfer strategy for tuning the water dissociation kinetics and accelerating the alkaline water electrolysis is proposed. The obtained catalysts are engineered by assembling and subsequently pyrolyzing the layer-stacked and 2D porphyrin-based Ru-N coordination polymers on nanocarbon supports. Benefiting from the well-defined Ru nanocluster-Nx -coordination bonds (Runc -Nx ), unique electronic environments, and local charge transfer properties, the catalysts exhibit the exceptional activity of 17 mV overpotential at 10 mA cm-2 and robust stability in water, which is more efficient than state-of-the-art Ru catalysts. The theoretical calculation suggests that the Runc -Nx sites enhance the nucleophilic attack of water and weaken the HOH bond. This study manifests that tailoring the bond environments of Ru clusters can significantly modulate their intrinsic catalytic activities and stabilities, which may open new avenues for developing high-active and durable catalysts for water electrolysis.

Imaging of Insect Hole in Living Tree Trunk Based on Joint Driven Algorithm of Electromagnetic Inverse Scattering.

Trunk pests have always been one of the most important species of tree pests. Trees eroded by trunk pests will be blocked in the transport of nutrients and water and will wither and die or be broken by strong winds. Most pests are social and distributed in the form of communities inside trees. However, it is difficult to know from the outside if a tree is infected inside. A new method for the non-invasive detecting of tree interiors is proposed to identify trees eroded by trunk pests. The method is based on electromagnetic inverse scattering. The scattered field data are obtained by an electromagnetic wave receiver. A Joint-Driven algorithm is proposed to realize the electromagnetic scattered data imaging to determine the extent and location of pest erosion of the trunk. This imaging method can effectively solve the problem of unclear imaging in the xylem of living trees due to the small area of the pest community. The Joint-Driven algorithm proposed by our group can achieve accurate imaging with a ratio of pest community radius to live tree radius equal to 1:60 under the condition of noise doping. The Joint-Driven algorithm proposed in this paper reduces the time cost and computational complexity of tree internal defect detection and improves the clarity and accuracy of tree internal defect inversion images.

Tailoring Bond Microenvironments and Reaction Pathways of Single-Atom Catalysts for Efficient Water Electrolysis.

Single-atom sites (SASs) are commonly stabilized and influenced by neighboring atoms in the host; disclosing the structure-reactivity relationships of SASs in water electrolysis is one of the grand challenges originating from the tremendous wealth of support materials with complex structures. Through a multidisciplinary view of the design principles, synthesis strategies, characterization techniques, and theoretical analysis of structure-performance correlations, this timely Review is dedicated to summarizing the most recent progress in tailoring bond microenvironments on different supports and discussing the reaction pathways and performance advantages of different SAS structures for water electrolysis. The essence and mechanisms of how SAS structures influence electrocatalysis and the critical requirements for future developments are discussed. Finally, the challenges and perspectives are also provided to stimulate the practical, widespread utilization of SAS catalysts in water-splitting electrolyzers.

A Novel Image Inpainting Method Used for Veneer Defects Based on Region Normalization.

The quality of the veneer directly affects the quality and grade of a blockboard made of veneer. To improve the quality and utilization of a defective veneer, a novel deep generative model-based method is proposed, which can generate higher-quality inpainting results. A two-phase network is proposed to stabilize the network training process. Then, region normalization is introduced to solve the inconsistency problem between the mean and standard deviation, improve the convergence speed of the model, and prevent the model gradient from exploding. Finally, a hybrid dilated convolution module is proposed to reconstruct the missing areas of the panels, which alleviates the gridding problem by changing the dilation rate. Experiments on our dataset prove the effectiveness of the improved approach in image inpainting tasks. The results show that the PSNR of the improved method reaches 33.11 and the SSIM reaches 0.93, which are superior to other methods.

Identification of Heterotic Loci with Desirable Allelic Interaction to Increase Yield in Rice.

Heterosis denotes the superiority of a hybrid plant over its parents. The use of heterosis has contributed significantly to yield improvement in crops. However, the genetic and molecular bases on heterosis are not fully understood. A large number of heterotic loci were identified for 12 yield-related traits in one parental population of chromosome segment substitution lines (CSSLs) and two test populations, which were interconnected by CSSLs derived from two rice genome-sequenced cultivars, Nipponbare and Zhenshan 97. Seventy-five heterotic loci were identified in both homozygous background of Zhenshan 97 and heterogeneous background of an elite hybrid cultivar Shanyou 63. Among the detected loci, at least 11 were colocalized in the same regions encompassing previously reported heterosis-associated genes. Furthermore, a heterotic locus Ghd8NIP for yield advantage was verified using transgenic experiments. Various allelic interaction at Ghd8 exhibited different heterosis levels in hetero-allelic combinations of five near-isogenic lines that contain a particular allele. The significant overdominance effects from some hetero-allelic combinations were found to improve yield heterosis in hybrid cultivars. Our findings support the role of allelic interaction at heterotic loci in the improvement of yield potential, which will be helpful for dissecting the genetic basis of heterosis and provide an optional strategy for the allele replacement in molecular breeding programs in hybrid rice.

Rice Haploid Inducer Development by Genome Editing.

The current method to induce haploids in rice is anther culture, which is time-consuming and labor intensive and only works for some varieties. Here we describe a seed-based haploid induction system created by CRISPR/Cas9 technology. By editing OsMATL, we generate rice haploid inducer lines with a 2-5% haploid induction rate in different germplasms.

Biomimetic Approach to Facilitate the High Filler Content in Free-Standing and Flexible Thermoelectric Polymer Composite Films Based on PVDF and Ag2Se Nanowires.

A high filler content is often needed in polymer composite-based thermoelectric (TE) films to improve their performance. Nevertheless, this often leads to poor processability and poor mechanical performance. Herein, a biomimetic approach is adopted to facilitate the filler content up to 90.5 wt % in free-standing and flexible n-type PVDF/Ag2Se TE films, where PVDF dendricolloids are a solution mixed with Ag2Se nanowires (NWs), followed by filtration. These soft dendric nanoparticles within PVDF dendricolloids have high adhesivity and strong network-building ability, which allows the formation of "grapevine-grape"-like networks with soft dendritic particles and inorganic TE fillers as "grapevine" and "manicure finger grapes", respectively. The maximum power factor of 189.02 µW m-1 K-2 is achieved for a PVDF/Ag2Se mass ratio of 1:9.5 at 300 K. Meanwhile, excellent flexibility with only 15.8% decrease in electrical conductivity after 1000 bending cycles was observed. These properties at such a high filler content are attributed to the long-range grapevine-like network of soft PVDF dendritic particles and entanglement between numerous Ag2Se NWs. This work carves a path to fabricate high-performance free-standing flexible n-type TE composite films as well as other functional polymer composites requiring high inorganic filler loading.

Generation of paternal haploids in wheat by genome editing of the centromeric histone CENH3.

New breeding technologies accelerate germplasm improvement and reduce the cost of goods in seed production1-3. Many such technologies could use in vivo paternal haploid induction (HI), which occurs when double fertilization precedes maternal (egg cell) genome loss. Engineering of the essential CENTROMERIC HISTONE (CENH3) gene induces paternal HI in Arabidopsis4-6. Despite conservation of CENH3 function across crops, CENH3-based HI has not been successful outside of the Arabidopsis model system7. Here we report a commercially operable paternal HI line in wheat with a ~7% HI rate, identified by screening genome-edited TaCENH3α-heteroallelic combinations. Unlike in Arabidopsis, edited alleles exhibited reduced transmission in female gametophytes, and heterozygous genotypes triggered higher HI rates than homozygous combinations. These developments might pave the way for the deployment of CENH3 HI technology in diverse crops.

Significant Enhancement of Thermal Conductivity in Polymer Composite via Constructing Macroscopic Segregated Filler Networks.

The low efficiency of thermal conductive filler is an unresolved issue in the area of thermal conductive polymer composites. Although it is known that minimizing phonon or electron interfacial scattering is the key for achieving high thermal conductivity, the enhancement is generally limited by preparation methods that can yield the ideal morphology and interfaces. Herein, low temperature expandable graphite (LTEG) is added into a commercial impact modifier (Elvaloy4170), which is then coated onto poly(butylene terephthalate) (PBT) particles with various sizes at millimeter scale between their melting temperatures. Thus, macroscopic segregated filler networks with several considerations are constructed: high LTEG loading leads to a short distance between fillers and a robust filler network; continuous Elvaloy-LTEG phase leads to a continuous filler network; and good interaction among filler and matrix leads to good interfacial interaction. More importantly, the rather large size of PBT particles provides the filler networks with low specific interfacial area, which minimizes the interfacial scattering of phonons or electrons. Relative to homogeneous composites with an identical composition, the thermal conductivity is enhanced from 6.2 to 17.8 W/mK. Such an enhancement span is the highest compared with results reported in the literature. Due to possible "shortcut" behavior, much higher effectiveness can be achieved for the current system than found in literature results when the Elvaloy-LTEG phase is considered as filler, with the effectiveness even exceeding the upper limit of theoretical calculation for highly loaded Elvaloy-LTEG phase with relatively large PBT particle sizes. This could provide some guidelines for the fabrication of highly thermal conductive polymer composites as well as multifunctional polymer composites.

Critical roles of soluble starch synthase SSIIIa and granule-bound starch synthase Waxy in synthesizing resistant starch in rice.

Changes in human lifestyle and food consumption have resulted in a large increase in the incidence of type-2 diabetes, obesity, and colon disease, especially in Asia. These conditions are a growing threat to human health, but consumption of foods high in resistant starch (RS) can potentially reduce their incidence. Strategies to increase RS in rice are limited by a lack of knowledge of its molecular basis. Through map-based cloning of a RS locus in indica rice, we have identified a defective soluble starch synthase gene (SSIIIa) responsible for RS production and further showed that RS production is dependent on the high expression of the Waxya (Wxa ) allele, which is prevalent in indica varieties. The resulting RS has modified granule structure; high amylose, lipid, and amylose-lipid complex; and altered physicochemical properties. This discovery provides an opportunity to increase RS content of cooked rice, especially in the indica varieties, which predominates in southern Asia.

Identification of quantitative trait loci associated with germination using chromosome segment substitution lines of rice (Oryza sativa L.).

Rapid and uniform seed germination under diverse environmental conditions is a desirable characteristic for most crop plants, such as rice, wheat, and maize. However, the genetic base of the variations in the rate of germination is not well understood. In this study, quantitative trait loci (QTL) for germination rate were mapped with a set of 143 chromosome segment substitution lines (CSSL) each contains a small genomic fragment from a japonica variety Nipponbare in the uniform genetic background of an indica variety Zhenshan97. Nine CSSL showed significantly lower germination rate than that in Zhenshan97. Four germination-related QTL were identified located on chromosomes 2, 5, 6 and 10, at which all japonica alleles decreased germination rate. By using the CSSL-derived F2 population, a major QTL (qGR2) on chromosome 2 was confirmed, and delimited to a 10.4 kb interval containing three putative candidate genes, of which OsMADS29 was only expressed preferentially in the seed. These results would facilitate cloning of the major gene that affects germination rate, and provide an insight into the genetic basis of germination.

A major QTL, Ghd8, plays pleiotropic roles in regulating grain productivity, plant height, and heading date in rice.

Rice yield and heading date are two distinct traits controlled by quantitative trait loci (QTLs). The dissection of molecular mechanisms underlying rice yield traits is important for developing high-yielding rice varieties. Here, we report the cloning and characterization of Ghd8, a major QTL with pleiotropic effects on grain yield, heading date, and plant height. Two sets of near isogenic line populations were developed for the cloning of Ghd8. Ghd8 was narrowed down to a 20-kb region containing two putative genes, of which one encodes the OsHAP3 subunit of a CCAAT-box binding protein (HAP complex); this gene was regarded as the Ghd8 candidate. A complementary test confirmed the identity and pleiotropic effects of the gene; interestingly, the genetic effect of Ghd8 was dependent on its genetic background. By regulating Ehd1, RFT1, and Hd3a, Ghd8 delayed flowering under long-day conditions, but promoted flowering under short-day conditions. Ghd8 up-regulated MOC1, a key gene controlling tillering and branching; this increased the number of tillers, primary and secondary branches, thus producing 50% more grains per plant. The ectopic expression of Ghd8 in Arabidopsis caused early flowering by 10 d-a situation similar to the one observed by its homolog AtHAP3b, when compared to wild-type under long-day conditions; these findings indicate the conserved function of Ghd8 and AtHAP3b in flowering in Arabidopsis. Our results demonstrated the important roles of Ghd8 in rice yield formation and flowering, as well as its opposite functions in flowering between rice and Arabidopsis under long-day conditions.

Identification of quantitative trait loci controlling rice mature seed culturability using chromosomal segment substitution lines.

The genetic transformation efficiency of a rice variety is largely determined by its tissue culturability. Establishment of a highly efficient tissue-culture system has greatly accelerated the wide spread application of transgenic japonica varieties. However, such process for indica rice was hampered because this type of variety is recalcitrant to in vitro culture. This study aimed to map the quantitative trait loci (QTLs) for mature seed culturability using a chromosomal segment substitution lines (CSSL) population derived from a cross between an indica variety "Zhenshan 97B" and a japonica variety "Nipponbare". The CSSLs consist of 139 lines each containing a single or a few introgression segments, and together covering the whole "Nipponbare" genome. Every CSSL was tested by culturing on the two medium systems developed for the respective indica and japonica parental varieties. The performance of culturability was evaluated by four indices: frequency of callus induction (CIF), callus subculture capability (CSC), frequency of plant regeneration (PRF) and the mean plantlet number per regenerated callus (MNR). All four traits displayed continuous variation among the CSSLs. With the culture system for japonica rice, three CIF QTLs, three CSC QTLs, three PRF QTLs and three MNR QTLs were detected. With the culture system for indica variety, six CIF QTLs, two CSC QTLs, three PRF QTLs and six MNR QTLs were identified, and these QTLs distributed on nine rice chromosomes. Two QTLs of CIF and two QTLs of MNR were detected in both the japonica and indica rice culture system. The correlation coefficients of all the four traits varied depending on the culture systems. These results provide the possibilities of enhancing the culturability of indica rice by marker-assisted breeding with those desirable alleles from the japonica.

Natural variation in Ghd7 is an important regulator of heading date and yield potential in rice.

Yield potential, plant height and heading date are three classes of traits that determine the productivity of many crop plants. Here we show that the quantitative trait locus (QTL) Ghd7, isolated from an elite rice hybrid and encoding a CCT domain protein, has major effects on an array of traits in rice, including number of grains per panicle, plant height and heading date. Enhanced expression of Ghd7 under long-day conditions delays heading and increases plant height and panicle size. Natural mutants with reduced function enable rice to be cultivated in temperate and cooler regions. Thus, Ghd7 has played crucial roles for increasing productivity and adaptability of rice globally.