Multi-order orbital angular momentum mode generators based on integrated long-period fiber gratings.

We propose integrated long-period fiber gratings (LPFGs) fabricated by a CO2 laser to realize a multi-channel and multi-order orbital angular momentum (OAM) mode generator. The integrated LPFG is inscribed on multiple surfaces of the few-mode fiber (FMF) by rotating the fiber in the opposite direction at an angle θ. By controlling the rotation angle, the number of integrated LPFGs can be set. The selected rotation angle is 43 ∘, which can integrate up to nine LPFGs, i.e., realizing that the number of channels for first-order orbital angular momentum (OAM) mode conversion is nine. The integrated LPFGs fabricated in this method allow a flexible design of channel spacing. In addition, the flexible selection of the integrated grating period achieves the simultaneous generation of multi-channel second-order and third-order OAM mode conversion. The multi-channel and multi-order OAM mode generators have important application in optical communication multiplexing systems and OAM sensing.

Observation of the photonic Hall effect and photonic magnetoresistance in random lasers.

Modulation of scattering in random lasers (RLs) by magnetic fields has attracted much attention due to its rich physical insights. We fabricate magnetic gain polymer optical fiber to generate RLs. From macroscopic experimental phenomena, with the increase of the magnetic field strength, the magnetic transverse photocurrent exists in disordered multiple scattering of RLs and the emission intensity of RLs decreases, which is the experimental observation of photonic Hall effect (PHE) and photonic magnetoresistance (PMR) in RLs. At the microscopic level, based on the field dependence theory of magnetic disorder in scattered nanoparticles and the replica symmetry breaking theory, the magnetic-induced transverse diffusion of photons reduces the scattering disorder, and then decreases the intensity fluctuation disorder of RLs. Our work establishes a connection between the above two effects and RLs, visualizes the influence of magnetic field on RL scattering at the microscopic level, which is crucial for the design of RLs.

Enhanced evanescent field via integration of a graphene oxide/poly(methyl methacrylate) hybrid film on coreless D-shaped fibers.

This study presents the implementation of an evanescent field (EF)-based sensing platform employing a hybrid film composed of graphene oxide (GO) and poly(methyl methacrylate) (PMMA), integrated onto coreless D-shaped fibers (cDsFs). The operational framework of the hybrid film-coated cDsFs (GoP-cDsFs) was comprehensively elucidated through theoretical and experimental analyses. To establish a baseline for comparison, the performance of the cDsFs with the sole inclusion of the PMMA film was investigated. Our investigations underscore the substantive role of graphene oxide in augmenting the evanescent field, thereby generating a synergistic effect that contributes to the overall enhancement of the evanescent field in the device. Consequently, the fabricated GoP-cDsF sensor manifests an outstanding sensitivity of -4.936 nm/°C, rendering it particularly well-suited for applications demanding high-sensitivity temperature sensing. Moreover, the unique attributes of the GoP-cDsF position it as a promising candidate for the measurement of both magnetic and electric fields, presenting an effective strategy for multifunctional sensing applications.

A Novel Biosensor for the Detection of Glucose Concentration Using the Dual-Peak Long Period Grating in the Near- to Mid-Infrared.

In this article, we demonstrate an improved efficient fibre sensor with a high sensitivity to measure glucose concentrations in the physiological range of human beings, operating in a broad spectral bandwidth from the near- to mid-infrared. The sensor consists of a dual-peak long period grating (DPLPG) with a period of 150 µm inscribed in an optical fibre with a diameter of 80 µm. The investigation of sensing for refractive index results in a sensitivity of ~-885.7 nm/refractive index unit (RIU) and ~2008.6 nm/RIU in the range of 1.30-1.44. The glucose measurement is achieved by the immobilisation of a layer of enzyme of glucose oxidase (GOD) onto the fibre surface for the selective enhancement of sensitivity for glucose. The sensor can measure glucose concentrations with a maximum sensitivity of -36.25 nm/(mg/mL) in the range of 0.1-3.0 mg/mL. To the best of our knowledge, this is the highest sensitivity ever achieved for a measurement of glucose with a long period grating-based sensor, indicating its potential for many applications including pharmaceutical, biomedical and food industries.

Multiple core modes conversion using helical long-period fiber gratings.

We propose and demonstrate the fabrication of an all-fiber mode converter enabling simultaneous generation of multiple high-order core modes, which is realized by inscribing a helical long-period grating (HLPG) in a few-mode fiber (FMF) using a femtosecond laser. Helical refractive index modulation is introduced by continuously irradiating the core region with a highly focused femtosecond laser, while the fiber moves in a spiral path through a three-dimensional translation stage. Mode conversion from the LP01 mode to high-order core modes, including LP11, LP21, LP31, LP02, LP12, and LP41 modes, is achieved by controlling the inscription pitch of the grating. Moreover, first-, second-, third-, and fourth-order orbital angular momentum (OAM) modes can be directly generated using the HLPGs, and multiple OAM modes of different topological charges can be simultaneously excited using a single high diffraction order HLPG. This approach offers a new option for implementing with high-integration high-order mode converters or OAM mode generators.

Ultrasensitive Screening of Endocrine-Disrupting Chemicals Using a Surface Plasmon Resonance Biosensor with Polarization-Compensated Laser Heterodyne Feedback.

Developing an ultrasensitive and reliable device for continuous monitoring of various endocrine-disrupting chemicals (EDCs) is in high demand, yet it remains a significant challenge. Traditional label-free surface plasmon resonance (SPR) sensing relies on the interaction of the surface plasmon wave and the sensing liquid via intensity modulation, endowed with simple structure and easy-to-miniaturization, however suffering from inferior sensitivity and stability. Here, we propose a novel optical structure in which the frequency-shifted light of different polarization returned to the laser cavity to stimulate laser heterodyne feedback interferometry (LHFI), hence amplifying the reflectivity change caused by the refractive index (RI) variations on the gold-coated SPR chip surface, and the s-polarized light could be further used as a reference to compensate for the noise of the LHFI-amplified SPR system, resulting in nearly three orders of magnitude enhancement of the RI sensing resolution (5.9 × 10-8 RIU) compared to the original SPR system (2.0 × 10-5 RIU). To further boost intense signal enhancement, custom-designed gold nanorods (AuNRs), which were optimized by the finite-difference time-domain (FDTD) simulation, were used to generate localized surface plasmon resonance (LSPR). By exploiting the estrogen receptor as the recognition material, estrogenic active chemicals were detected with a 17ß-estradiol/L detection limit of 0.004 ng, which is nearly 180-fold lower than that of the system without introducing AuNRs. The developed SPR biosensor is expected to be capable of screening various EDCs with universality by using several nuclear receptors, such as the androgen receptor and thyroid receptor, and will substantially accelerate the assessment of global EDCs.

An Ultrasensitive and Universal Surface Plasmonic Biosensor for Detection of Micropollutants in Aquatic Environments.

Simple yet ultrasensitive and accurate quantification of a variety of analytical targets by virtue of a universal sensing device holds promise to revolutionize environmental monitoring, medical diagnostics, and food safety. Here, we propose a novel optical surface plasmon resonance (SPR) system in which the frequency-shifted light of different polarizations returned the laser cavity to stimulate laser heterodyne feedback interferometry (LHFI), hence amplifying the reflectivity change caused by the refractive index (RI) variations on the gold-coated SPR chip surface. In addition, the s-polarized light was further used as the reference to compensate the noise of the LHFI-amplified SPR system, resulting in nearly 3 orders of magnitude enhancement of RI resolution (5.9 × 10-8 RIU) over the original SPR system (2.0 × 10-5 RIU). By exploiting nucleic acids, antibodies, and receptors as recognition materials, a variety of micropollutants were detected with ultralow detection limits, ranging from a toxic metal ion (Hg2+, 70 ng/L) to a group of commonly occurring biotoxin (microcystins, 3.9 ng microcystin-LR/L) and a class of environmental endocrine disruptors (estrogens, 0.7 ng 17ß-estradiol/L). This sensing platform exhibits several distinct characteristics, including dual improvement of sensitivity and stability and common-path optical construction without needing optical alignment, demonstrating a promising avenue toward environmental monitoring.

Diffraction characteristics of radiated tilted fiber grating and its spectrometer application.

We have numerically and experimentally presented the diffraction characteristics of radiated tilted fiber grating (RTFG) in terms of the spectrum, bandwidth, degree of polarization, angular dispersion, and temperature crosstalk. The theoretical and experimental results have shown that the polarization property, bandwidth, and dispersion of RTFG highly depended on the tilt angle of RTFG, and the RTFG has ultra-low temperature crosstalk. We have simulated the transmission spectrum of the RTFG with different tilt angles (25°, 31°, 38°, 45°, and 54°), in which the results show that the larger tilt angle has the wider bandwidth. The RTFGs with the tilt angle of 25°, 31°, 38°, 45°, and 54° have the 3dB bandwidth of 110 nm, 144 nm, 182 nm, 242 nm, and 301 nm, respectively. Besides, the degree of polarization (DOP) of the radiated light from RTFG with the different tilt angles are 0.876, 0.944, 0.967, 0.998, and 0.970, respectively, and the RTFG has the maximum DOP at the tilt angle of 45°, which could be used as single-polarization diffraction device. The experimental results show that with further increase or decrease of the tilt angle, the DOP of radiated light of RTFG would decrease. Both the theoretical and experimental results show that the smaller tilt angle could greatly improve the diffraction angular dispersion of RTFG, in which the 25°, 31°, 38°, and 45° RTFG have the angular dispersion of 0.2288 °/nm, 0.1026 °/nm, 0.0714 °/nm, and 0.0528 °/nm, respectively. Due to the broad working bandwidth, the diffraction angles of RTFG have ultra-low temperature crosstalk, where -0.00042, -0.00054, -0.00064, and -0.00099 degree / °C at the tilt angle of 25°, 31°, 38°, and 45°. Finally, we have demonstrated a miniaturized spectrometer integrated by a 25° RTFG, which has a high spectral resolution of 0.08 nm. The proposed RTFG would be an ideal in-fiber diffraction device and widely applied in spectral analysis, space optical communication, and Lidar areas.

Overexpression of ZmEREBP60 enhances drought tolerance in maize.

Apetala2/ethylene response factor (AP2/ERF) family of transcription factors plays important roles in plant development and stress responses. However, few members of this family have been functionally and mechanistically characterised in maize. In this study, we characterised a member of the AP2/ERF transcription factor family, ZmEREBP60 from maize. Amino acid sequence alignment and phylogenetic analysis showed that ZmEREBP60 belongs to cluster I of the AP2/ERF family. qRT-PCR analysis indicated that ZmEREBP60 expression was highly induced by drought in the roots, coleoptiles, and leaves. Subcellular localisation analysis revealed that ZmEREBP60 was localised in the nucleus. Moreover, overexpression of ZmEREBP60 enhanced tolerance to drought stress while alleviating the drought-induced increase in H2O2 accumulation and malondialdehyde content in transgenic lines. Transcriptome analysis showed that ZmEREBP60 regulates the expression of genes involved in H2O2 catabolism, water deprivation response, and abscisic acid signalling pathway. Collectively, as a new member of the AP2/ERF transcription factor family in maize, ZmEREBP60 is a positive regulator of plant drought response.

Femtosecond laser inscribed parallel long-period fiber gratings for multi-channel core mode conversion.

We propose and demonstrate the inscription of parallel long-period gratings (LPGs) in a few-mode fiber (FMF) using femtosecond lasers. Mode conversion from the fundamental (LP01) mode to high-order core modes, including LP11, LP21, LP31, LP02, and LP12, is achieved by controlling the inscription period of the gratings. Taking advantage of the highly focused femtosecond laser, LPGs with different off-axis offsets were fabricated, and the resonance wavelength and the inscription efficiency of the gratings versus the offset were investigated. Based on the off-axis writing technique and using the femtosecond laser source, we wrote parallel LPGs that contain multi-gratings in a single FMF and achieved a multi-channel core mode converter in a single FMF with flexibility in terms of the resonant wavelength and mode conversion among different modes. This approach offers a new, to the best of our knowledge, option for implementation with high integration, and a multi-channel mode converter, which could find potential applications in FMF multi-wavelength laser systems, and wavelength/mode division multiplex communication systems. Furthermore, these microstructured LPGs integrated into an optical fiber can be used as a multifunctional sensor.

Broadband and tunable bandgap guidance based on ring-pattern liquid-filled photonic crystal fibers.

A ring-pattern liquid-filled photonic crystal fiber (R-LPCF) scheme, in which the first-ring holes (the six holes adjacent to the core) are filled with high-index inclusions, has been experimentally demonstrated to extend over a wide-guided spectral range. In such new fiber, the bandgap-like core mode is investigated, among which the telecommunication bandgap exhibits confinement losses five orders of magnitude smaller than those of the corresponding fully liquid-filled photonic bandgap fibers. Besides, the R-LPCF serving the thermal tunability when filled with index-matching liquid enables guided bandwidth switching from the 1.5-µm-band to the 1.3-µm-band communication window. Moreover, the structural parameters for two commercial photonic crystal fiber are quantified to confirm the feasibility of the proposed method.

Corrigendum: High-Sensitive Surface Plasmon Resonance Imaging Biosensor Based on Dual-Wavelength Differential Method.

[This corrects the article DOI: 10.3389/fchem.2021.801355.].

Surface plasmon resonance biosensor with laser heterodyne feedback for highly-sensitive and rapid detection of COVID-19 spike antigen.

The ongoing outbreak of the COVID-19 has highlighted the importance of the pandemic prevention and control. A rapid and sensitive antigen assay is crucial in diagnosing and curbing pandemic. Here, we report a novel surface plasmon resonance biosensor based on laser heterodyne feedback interferometry for the detection of SARS-CoV-2 spike antigen, which is achieved by detecting the tiny difference in refractive index between different antigen concentrations. The biosensor converts the refractive index changes at the sensing unit into the intensity changes of light through surface plasmon resonance, achieving label-free and real-time detection of biological samples. Moreover, the gain amplification effect of the laser heterodyne feedback interferometry further improved the sensitivity of this biosensor. The biosensor can rapidly respond to continuous and periodic changes in the refractive index with a high resolution of 3.75 × 10-8 RIU, demonstrating the repeatability of the biosensor. Afterwards, the biosensor is immobilized by the anti-SARS-CoV-2 spike monoclonal antibodies, thus realizing the specific recognition of the antigen. The biosensor exhibited a high sensitivity towards the concentration of the antigen with a linear dynamic range of five orders of magnitude and a resolution of 0.08 pg/mL. These results indicate that this principle can be used as a rapid diagnostic method for COVID-19 antigens without sample labelling.

High-Sensitive Surface Plasmon Resonance Imaging Biosensor Based on Dual-Wavelength Differential Method.

Intensity interrogation surface plasmon resonance (ISPR) sensing has a simple schematic design and is the most widely used surface plasmon resonance technology at present. However, it has relatively low sensitivity, especially for ISPR imaging (ISPRi). In this paper, a new technique for the real-time monitoring of biomolecule binding on sensor surfaces via ISPRi detection is described. The technique is based on the interrogation of the differential value of two intensities at two specific wavelengths from the reflected light spectrum. In addition, we also optimized the selection of dual-wavelength parameters under different circumstances to achieve the highest sensitivity. The new technique achieved a refractive index resolution (RIR) of 2.24 × 10-6 RIU, which is far beyond that of traditional ISPRi technique. Moreover, our new ISPRi technique also realized the real-time detection of high-throughput biomolecular binding. This study is expected to promote the development of faster and more accurate SPRi technologies.

Phase interrogation surface plasmon resonance hyperspectral imaging sensor for multi-channel high-throughput detection.

Phase interrogation surface plasmon resonance (SPR) imaging is, in principle, suitable in multiple samples and high-throughput detection, but the refractive index difference of various samples can be largely varied, while the dynamic range of phase interrogation SPR is narrow. So it is difficult to perform multi-sample detection in phase interrogation mode. In this paper, we successfully designed a multi-channel phase interrogation detection SPR imaging sensing scheme based on a common optical interference path between p- and s-polarized light without using any mechanical moving components. The fixed optical path difference between p- and s-polarized light is introduced by a birefringence crystal to produce sinusoidal spectral interference fringes. We adopted a time-division-multiplexing peak-finding algorithm to track the resonance wavelength so that the detection range can cover every channel. The phase values which carry the high sensitivity signal of the corresponding samples are calculated by the iterative parameter scanning cross-correlation algorithm.

Intracavity birefringence-controlled GHz-tuning range passively harmonic mode-locked fiber laser based on NPR.

We experimentally demonstrate a harmonic-order controllable L-band Er-doped passively mode-locked fiber laser based on nonlinear polarization rotation (NPR). Distinct from all previous reports, we find that the intracavity birefringence is able to control the harmonic order of a passively mode-locked fiber laser. Experimentally, under a constant pump power of 704 mW, the harmonic order can be tuned from 113th to 39th monotonically by adjusting the polarization controller orientation only. The corresponding repetition rate changes from 2.21 to 0.77 GHz simultaneously. Remarkably, the super-mode suppression ratio of each harmonic order we observed is higher than 29 dB with a maximum of 36.5 dB. Simulated transmission spectra of NPR prove that the changed transmission plays an important role in controlling the harmonic order.

High-throughput imaging surface plasmon resonance biosensing based on ultrafast two-point spectral-dip tracking scheme.

Wavelength interrogation surface plasmon resonance imaging (λSPRi) has potential in detecting 2-dimensional (2D) sensor array sites, but the resonance wavelength imaging rate limits the application of detecting biomolecular binding process in real time. In this paper, we have successfully demonstrated an ultrafast λSPRi biosensor system. The key feature is a two-point tracking algorithm that drives the liquid crystal tunable filter (LCTF) to achieve fast-tracking of the resonance wavelength movement caused by the binding of target molecules with the probe molecules on the sensing surface. The resonance wavelength measurement time is within 0.25s. To date, this is the fastest speed ever reported in λSPRi. Experiment results show that the sensitivity and dynamic are 2.4 × 10-6 RIU and 4.6 × 10-2 RIU, respectively. In addition, we have also demonstrated that the system has the capability of performing fast high-throughput detection of biomolecular interactions, which confirms that this fast real-time detecting approach is most suitable for high-throughput and label-free biosensing applications.

Polarization dependent cladding modes coupling and spectral analyses of excessively tilted fiber grating.

We report on the detailed analyses of mode coupling from fiber core to cladding in excessively tilted fiber gratings (ETFGs). Cladding modes responsible for the typical dual peak pairs in the transmission spectrum of ETFGs are identified with phase matching condition, which suggests two set of dual peak pairs generated from coupling to cladding modes with even and odd azimuthal order. The polarization dependence of those dual peak pairs are also investigated by calculating the coupling coefficients of cladding modes for two orthogonal polarizations. With the calculated coupling coefficients, the measured polarization dependent spectra can be reproduced numerically.

Phase interrogation SPR sensing based on white light polarized interference for wide dynamic detection range.

A phase surface plasmon resonance (SPR) sensing technology based on white light polarized interference in common-path geometry is reported. A halogen lamp is used as the excitation source of the SPR sensor. The fixed optical path difference (OPD) between p- and s-polarized light is introduced by a birefringence crystal to produce sinusoidal spectral interference fringes. The SPR phase is accurately extracted from the interference fringes using a novel iterative parameter-scanning cross-correlation algorithm. The dynamic detection range is expanded by tracking the best SPR wavelength, which is identified using a window Fourier algorithm. The experimental results show that the sensitivity of this SPR system was 1.3 × 10-7 RIU, and the dynamic detection range was 0.029 RIU. This sensor, not only simple to implement and cost efficient, requires no modulators.

Compact linear polarization spectrometer based on radiation mode shaped in-fiber diffraction grating.

We propose a compact linear polarization spectrometer based on the in-fiber polarization-dependent diffraction grating. The beam profile of radiated light of the grating is shaped to be a Gaussian profile to improve the performance of the spectrometer, where the size of the focused light spot is reduced from 44 um to 33 um with the shaped radiation mode of the grating. Based on the experimental results, the proposed spectrometer can achieve 0.05 nm resolution and 115 nm wavelength responding range from 1495 nm to 1610 nm. To verify the performance of the proposed fiber spectrometer, we measure the transmission spectra of an excessively tilted fiber grating, which has a pair of orthogonal polarization transmission spectra. Compared with the traditional measuring method, the proposed fiber spectrometer integrates the polarizing and spectral analyzing functions in the measuring system and achieves the polarization-sensitive spectral analysis, which shows good wavelength consistency and perfect polarization characteristics.