On the role of asymmetric molecular geometry in high-performance organic solar cells.

Although asymmetric molecular design has been widely demonstrated effective for organic photovoltaics (OPVs), the correlation between asymmetric molecular geometry and their optoelectronic properties is still unclear. To access this issue, we have designed and synthesized several symmetric-asymmetric non-fullerene acceptors (NFAs) pairs with identical physical and optoelectronic properties. Interestingly, we found that the asymmetric NFAs universally exhibited increased open-circuit voltage compared to their symmetric counterparts, due to the reduced non-radiative charge recombination. From our molecular-dynamic simulations, the asymmetric NFA naturally exhibits more diverse molecular interaction patterns at the donor (D):acceptor (A) interface as compared to the symmetric ones, as well as higher D:A interfacial charge-transfer state energy. Moreover, it is observed that the asymmetric structure can effectively suppress triplet state formation. These advantages enable a best efficiency of 18.80%, which is one of the champion results among binary OPVs. Therefore, this work unambiguously demonstrates the unique advantage of asymmetric molecular geometry, unveils the underlying mechanism, and highlights the manipulation of D:A interface as an important consideration for future molecular design.

Enhancing Efficiency of Large-Area Wide-Bandgap Perovskite Solar Modules with Spontaneously Formed Self-Assembled Monolayer Interfaces.

Wide-bandgap (WBG) perovskites play a crucial role in perovskite-based tandem cells. Despite recent advances using self-assembled monolayers (SAMs) to facilitate efficiency breakthroughs, achieving precise control over the deposition of such ultrathin layers remains a significant challenge for large-scale fabrication of WBG perovskite and, consequently, for the tandem modules. To address these challenges, we propose a facile method that integrates MeO-2PACz and Me-4PACz in optimal proportions (Mixed SAMs) into the perovskite precursor solution, enabling the simultaneous codeposition of WBG perovskite and SAMs. This technique promotes the spontaneous formation of charge-selective contacts while reducing defect densities by coordinating phosphonic acid groups with the unbonded Pb2+ ions at the bottom interface. The resulting WBG perovskite solar cells (PSCs) demonstrated a power conversion efficiency of 19.31% for small-area devices (0.0585 cm2) and 17.63% for large-area modules (19.34 cm2), highlighting the potential of this codeposition strategy for fabricating high-performance, large-area WBG PSCs with enhanced reproducibility. These findings offer valuable insights for advancing WBG PSCs and the scalable fabrication of modules.

Charge Transfer from Quantum-Confined 0D, 1D, and 2D Nanocrystals.

The properties of colloidal quantum-confined semiconductor nanocrystals (NCs), including zero-dimensional (0D) quantum dots, 1D nanorods, 2D nanoplatelets, and their heterostructures, can be tuned through their size, dimensionality, and material composition. In their photovoltaic and photocatalytic applications, a key step is to generate spatially separated and long-lived electrons and holes by interfacial charge transfer. These charge transfer properties have been extensively studied recently, which is the subject of this Review. The Review starts with a summary of the electronic structure and optical properties of 0D-2D nanocrystals, followed by the advances in wave function engineering, a novel way to control the spatial distribution of electrons and holes, through their size, dimension, and composition. It discusses the dependence of NC charge transfer on various parameters and the development of the Auger-assisted charge transfer model. Recent advances in understanding multiple exciton generation, decay, and dissociation are also discussed, with an emphasis on multiple carrier transfer. Finally, the applications of nanocrystal-based systems for photocatalysis are reviewed, focusing on the photodriven charge separation and recombination processes that dictate the function and performance of these materials. The Review ends with a summary and outlook of key remaining challenges and promising future directions in the field.

Transient Photoinduced Pb2+ Disproportionation for Exciton Self-Trapping and Broadband Emission in Low-Dimensional Lead Halide Perovskites.

Low-dimensional lead halide perovskites with broadband emission hold great promise for single-component white-light-emitting (WLE) devices. The origin of their broadband emission has been commonly attributed to self-trapped excitons (STEs) composed of localized electronic polarization with a distorted lattice. Unfortunately, the exact electronic and structural nature of the STE species in these WLE materials remains elusive, hindering the rational design of high-efficiency WLE materials. In this study, by combining ultrafast transient absorption spectroscopy and ab initio calculations, we uncover surprisingly similar STE features in two prototypical low dimensional WLE perovskite single crystals: 1D (DMEDA)PbBr4 and 2D (EDBE)PbBr4, despite of their different dimensionalities. Photoexcited excitons rapidly localize to intrinsic STEs within ∼250 fs, contributing to the white light emission. Crucially, STEs in both systems exhibit characteristic absorption features akin to those of Pb+ and Pb3+. Further atomic level theoretical simulations confirm photoexcited electrons and holes are localized on the Pb2+ site to form Pb+- and Pb3+-like species, resembling transient photoinduced Pb2+ disproportionation. This study provides conclusive evidence on the key excited state species for exciton self-trapping and broadband emission in low dimensional lead halide WLE perovskites and paves the way for the rational design of high-efficiency WLE materials.

Simple-Structured Acceptor with Highly Interconnected Electron-Transport Pathway Enables High-Efficiency Organic Solar Cells.

Achieving desirable charge-transport highway is of vital importance for high-performance organic solar cells (OSCs). Here, it is shown how molecular packing arrangements can be regulated via tuning the alkyl-chain topology, thus resulting in a 3D network stacking and highly interconnected pathway for electron transport in a simple-structured nonfused-ring electron acceptor (NFREA) with branched alkyl side-chains. As a result, a record-breaking power conversion efficiency of 17.38% (certificated 16.59%) is achieved for NFREA-based devices, thus providing an opportunity for constructing low-cost and high-efficiency OSCs.

Regulating Crystallinity Mismatch Between Donor and Acceptor to Improve Exciton/Charge Transport in Efficient Organic Solar Cells.

Achieving a more balanced charge transport by morphological control is crucial in reducing bimolecular and trap-assisted recombination and enhancing the critical parameters for efficient organic solar cells (OSCs). Hence, a facile strategy is proposed to reduce the crystallinity difference between donor and acceptor by incorporating a novel multifunctional liquid crystal small molecule (LCSM) BDTPF4-C6 into the binary blend. BDTPF4-C6 is the first LCSM based on a tetrafluorobenzene unit and features a low liquid crystal phase transition temperature and strong self-assembly ability, conducive to regulating the active layer morphology. When BDTPF4-C6 is introduced as a guest molecule into the PM6 : Y6 binary, it exhibits better compatibility with the donor PM6 and primarily resides within the PM6 phase because of the similarity-intermiscibility principle. Moreover, systematic studies revealed that BDTPF4-C6 could be used as a seeding agent for PM6 to enhance its crystallinity, thereby forming a more balanced and favourable charge transport with suppressed charge recombination. Intriguingly, dual Förster resonance energy transfer was observed between the guest molecule and the host donor and acceptor, resulting in an improved current density. This study demonstrates a facile approach to balance the charge mobilities and offers new insights into boosting the efficiency of single-junction OSCs beyond 20 %.

Impact of Electrostatic Interaction on Vertical Morphology and Energy Loss in Efficient Pseudo-Planar Heterojunction Organic Solar Cells.

Although a suitable vertical phase separation (VPS) morphology is essential for improving charge transport efficiency, reducing charge recombination, and ultimately boosting the efficiency of organic solar cells (OSCs), there is a lack of theoretical guidance on how to achieve the ideal morphology. Herein, a relationship between the molecular structure and the VPS morphology of pseudo-planar heterojunction (PPHJ) OSCs is established by using molecular surface electrostatic potential (ESP) as a bridge. The morphological evolution mechanism is revealed by studying four binary systems with vary electrostatic potential difference (∆ESP) between donors (Ds) and acceptors (As). The findings manifest that as ∆ESP increases, the active layer is more likely to form a well-mixed phase, while a smaller ∆ESP favors VPS morphology. Interestingly, it is also observed that a larger ∆ESP leads to enhanced miscibility between Ds and As, resulting in higher non-radiative energy losses (ΔE3). Based on these discoveries, a ternary PPHJ device is meticulously designed with an appropriate ∆ESP to obtain better VPS morphology and lower ΔE3, and an impressive efficiency of 19.09% is achieved. This work demonstrates that by optimizing the ΔESP, not only the formation of VPS morphology can be controlled, but also energy losses can be reduced, paving the way to further boost OSC performance.

A New Metal-Free Molecular Perovskite-Related Single Crystal with Quantum Wire Structure for High-Performance X-Ray Detection.

The family of metal-free molecular perovskites, an emerging novel class of eco-friendly semiconductor, welcomes a new member with a unique 1D hexagonal perovskite structure. Lowering dimensionality at molecular level is a facile strategy for crystal structure conversion, optoelectronic property regulation, and device performance optimization. Herein, the study reports the design, synthesis, packing structure, and photophysical properties of the 1D metal-free molecular perovskite-related single crystal, rac-3APD-NH4I3(rac-3APD= racemic-3-Aminopiperidinium), that features a quantum wire structure formed by infinite chains of face-sharing NH4I6 octahedra, enabling strong quantum confinement with strongly self-trapped excited (STE) states to give efficient warm orange emission with a photoluminescence quantum yield (PLQY) as high as ≈41.6%. The study accordingly unveils its photoexcited carrier dynamics: rac-3APD-NH4I3 relaxes to STE state with a short lifetime of 10 ps but decays to ground state by emitting photons with a relatively longer lifetime of 560 ps. Additionally, strong quantum confinement effect is conducive to charge transport along the octahedral channels that enables the co-planar single-crystal X-ray detectors to achieve a sensitivity as high as 1556 µC Gyair -1 cm-2. This work demonstrates the first case of photoluminescence mechanism and photophysical dynamics of 1D metal-free perovskite-related semiconductor, as well as the promise for high-performance X-ray detector.

Ultrafast Interlayer Charge Transfer Outcompeting Intralayer Valley Relaxation in Few-Layer 2D Heterostructures.

While 2D transition metal dichalcogenides (TMDs) feature interesting layer-tunable multivalley band structures, their preeminent role in determining the photoexcitation charge transfer dynamics in 2D heterostructures (HSs) is yet to be unraveled, as previous charge transfer studies on TMD HSs have been mostly focused on monolayers with a direct bandgap at the K valley. By ultrafast transient absorption spectroscopy and deliberately designed few-layer WSe2/WS2 HSs, we have observed an ultrafast interlayer electron transfer from photoexcited few-layer WSe2 to WS2, prior to intralayer relaxation to lower lying dark valleys. More interestingly, we have identified an unconventional ∼0.5 ps electron back-transfer process after the initial interlayer electron transfer in HSs with WSe2 layers ≥ 3, regenerating indirect intralayer excitons. The result reveals an ielectron and valley relaxation pathway mediated by interlayer charge transfer in 2D HSs, faster than intralayer relaxation. It also sheds light on the origin of generally observed robust ultrafast interlayer charge transfer in TMD HSs and provides guidance toward optoelectronic and valleytronic devices using few-layer TMDs.

Above 100% Efficiency Photocharge Generation in Monolayer Semiconductors by Singlet Fission Sensitization.

Sensitizing inorganic semiconductors using singlet fission (SF) materials, which produce two excitons from one absorbed photon, can potentially boost their light-to-electricity conversion efficiency. The SF sensitization is particularly exciting for two-dimensional (2D) layered semiconductors with atomically flat surface and high carrier mobility but limited light absorption. However, efficiently harnessing triplet excitons from SF by charge transfer at organic/inorganic interface has been challenging, and the intricate interplay among competing processes remains unresolved. Here, we investigate SF sensitization in high-quality organic/2D bilayer heterostructures featuring TIPS-Pc single crystals. Through transient magneto-optical spectroscopy, we demonstrate that despite an ultrafast SF process in sub-100 fs, a significant fraction of singlet excitons in TIPS-Pc dissociate at the interface before fission, while triplet excitons from SF undergo diffusion-limited charge transfer at the interface in ∼10 ps to ns. Remarkably, the photocharge generation efficiency reaches 126% in heterostructures with optimal thickness, resulting from the competitive interplay between singlet exciton fission, dissociation, and triplet exciton transport. This presents a promising strategy for advancing SF-enhanced 2D optoelectronics beyond the conventional limits.

Phase-pure 2D tin halide perovskite thin flakes for stable lasing.

Ruddlesden-Popper tin halide perovskites are a class of two-dimensional (2D) semiconductors with exceptional optoelectronic properties, high carrier mobility, and low toxicity. However, the synthesis of phase-pure 2D tin perovskites is still challenging, and the fundamental understanding of their optoelectronic properties is deficient compared to their lead counterparts. Here, we report the synthesis of a series of 2D tin perovskite bulk crystals with high phase purity via a mixed-solvent strategy. By engineering the quantum-well thickness (related to n value) and organic ligands, the optoelectronic properties, including photoluminescence emission, exciton-phonon coupling strength, and exciton binding energy, exhibit a wide tunability. In addition, these 2D tin perovskites exhibited excellent lasing performance. Both high-n value tin perovskite (n > 1) and n = 1 tin perovskite thin flakes were successfully optically pumped to lase. Furthermore, the lasing from 2D tin perovskites could be maintained up to room temperature. Our findings highlight the tremendous potential of 2D tin perovskites as promising candidates for high-performance lasers.

All-polymer organic solar cells with nano-to-micron hierarchical morphology and large light receiving angle.

Distributed photovoltaics in living environment harvest the sunlight in different incident angles throughout the day. The development of planer solar cells with large light-receiving angle can reduce the requirements in installation form factor and is therefore urgently required. Here, thin film organic photovoltaics with nano-sized phase separation integrated in micro-sized surface topology is demonstrated as an ideal solution to proposed applications. All-polymer solar cells, by means of a newly developed sequential processing, show large magnitude hierarchical morphology with facilitated exciton-to-carrier conversion. The nano fibrilar donor-acceptor network and micron-scale optical field trapping structure in combination contributes to an efficiency of 19.06% (certified 18.59%), which is the highest value to date for all-polymer solar cells. Furthermore, the micron-sized surface topology also contributes to a large light-receiving angle. A 30% improvement of power gain is achieved for the hierarchical morphology comparing to the flat-morphology devices. These inspiring results show that all-polymer solar cell with hierarchical features are particularly suitable for the commercial applications of distributed photovoltaics due to its low installation requirement.

Organic and Inorganic Metal Halide Tandem Scintillator for Dual-Energy Flat-Panel X-ray Imaging.

Traditional indirect flat-panel X-ray imaging (FPXI) uses inorganic scintillators with high-Z elements, which lack spectral information about X-ray photons and reflect only integrated X-ray intensity. To address this issue, we developed a stacked scintillator structure that combines organic and inorganic materials. This structure allows X-ray energies to be distinguished in a single shot by using a color or multispectral visible camera. However, the resolution of the resulting dual-energy image is primarily limited by the top scintillator layer. We inserted a layer of anodized aluminum oxide (AAO) between the double scintillators. This layer limits the lateral propagation of scintillation light, improves imaging resolution, and acts as a filter for X-rays. Our research demonstrates the advantages of stacked organic-inorganic scintillator structures for dual-energy X-ray imaging and provides novel and practical applications for relatively low-Z organic scintillators with high internal X-ray-to-light conversion efficiency.

Long-Range Hot Charge Transfer Exciton Dissociation in an Organic/2D Semiconductor Hybrid Excitonic Heterostructure.

Whether and how an electron-hole pair at the donor-acceptor interface separates from their mutual Coulombic interaction has been a long-standing question for both fundamental interests and optoelectronic applications. This question is particularly interesting but yet to be unraveled in the emerging mixed-dimensional organic/2D semiconductor excitonic heterostructures where the Coulomb interaction is poorly screened. Here, by tracking the characteristic electroabsorption (Stark effect) signal from separated charges using transient absorption spectroscopy, we directly follow the electron-hole pair separation process in a model organic/2D heterostructure, vanadium oxide phthalocyanine/monolayer MoS2. After sub-100 fs photoinduced interfacial electron transfer, we observe a barrier-less long-range electron-hole pair separation to free carriers within 1 ps by hot charge transfer exciton dissociation. Further experiment reveals the key role of the charge delocalization in organic layers sustained by the local crystallinity, while the inherent in-plane delocalization of the 2D semiconductor has a negligible contribution to charge pair separation. This study reconciles the seemingly contradicting charge transfer exciton emission and dissociation process and is important to the future development of efficient organic/2D semiconductor optoelectronic devices.

Terpolymerization and Regioisomerization Strategy to Construct Efficient Terpolymer Donors Enabling High-Performance Organic Solar Cells.

Terpolymerization and regioisomerization strategies are combined to develop novel polymer donors to overcome the difficulty of improving organic solar cells (OSCs) performance. Two novel isomeric units, bis(2-hexyldecyl)-2,5-bis(4-chlorothiophen-2-yl)thieno[3,2-b]thiophene-3,6-dicarboxylate (TTO) and bis(2-hexyldecyl) 2,5-bis(3-chlorothiophen-2-yl)thieno[3,2-b]thiophene-3,6-dicarboxylate (TTI), are obtained and incorporated into the PM6 backbone via random copolymerization to form a series of terpolymers. Interestingly, it is found that different chlorine (Cl) substituent positions can significantly change the molecular planarity and electrostatic potential (ESP) owing to the steric hindrance effect of the heavy Cl atom, which leads to different molecular aggregation behaviors and miscibility between the donor and acceptor. The TTO unit features a higher number of multiple S···O non-covalent interactions, more positive ESP, and fewer isomer structures than TTI. As a result, the terpolymer PM6-TTO-10 exhibits a much better molecular coplanarity, stronger crystallinity, more obvious aggregation behavior, and proper phase separation in the blend film, which are conducive to more efficient exciton dissociation and charge transfer. Consequently, the PM6-TTO-10:BTP-eC9-based OSCs achieve a champion power conversion efficiency of 18.37% with an outstanding fill factor of 79.97%, which are among the highest values reported for terpolymer-based OSCs. This work demonstrates that terpolymerization combined with Cl regioisomerization is an efficient approach for achieving high-performance polymer donors.

Compromising Charge Generation and Recombination of Organic Photovoltaics with Mixed Diluent Strategy for Certified 19.4% Efficiency.

The ternary blend is demonstrated as an effective strategy to promote the device performance of organic photovoltaics (OPVs) due to the dilution effect. While the compromise between the charge generation and recombination remains a challenge. Here, a mixed diluent strategy for further improving the device efficiency of OPV is proposed. Specifically, the high-performance OPV system with a polymer donor, i.e., PM6, and a nonfullerene acceptor (NFA), i.e., BTP-eC9, is diluted by the mixed diluents, which involve a high bandgap NFA of BTP-S17 and a low bandgap NFA of BTP-S16 (similar with that of the BTP-eC9). The BTP-S17 of better miscibility with BTP-eC9 can dramatically enhance the open-circuit voltage (VOC ), while the BTP-S16 maximizes the charge generation or the short-circuit current density (JSC ). The interplay of BTP-17 and BTP-S16 enables better compromise between charge generation and recombination, thus leading to a high device performance of 19.76% (certified 19.41%), which is the best among single-junction OPVs. Further analysis on carrier dynamics validates the efficacy of mixed diluents for balancing charge generation and recombination, which can be further attributed to the more diverse energetic landscapes and improved morphology. Therefore, this work provides an effective strategy for high-performance OPV for further commercialization.

Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells.

Reducing the energy loss of sub-cells is critical for high performance tandem organic solar cells, while it is limited by the severe non-radiative voltage loss via the formation of non-emissive triplet excitons. Herein, we develop an ultra-narrow bandgap acceptor BTPSeV-4F through replacement of terminal thiophene by selenophene in the central fused ring of BTPSV-4F, for constructing efficient tandem organic solar cells. The selenophene substitution further decrease the optical bandgap of BTPSV-4F to 1.17 eV and suppress the formation of triplet exciton in the BTPSV-4F-based devices. The organic solar cells with BTPSeV-4F as acceptor demonstrate a higher power conversion efficiency of 14.2% with a record high short-circuit current density of 30.1 mA cm-2 and low energy loss of 0.55 eV benefitted from the low non-radiative energy loss due to the suppression of triplet exciton formation. We also develop a high-performance medium bandgap acceptor O1-Br for front cells. By integrating the PM6:O1-Br based front cells with the PTB7-Th:BTPSeV-4F based rear cells, the tandem organic solar cell demonstrates a power conversion efficiency of 19%. The results indicate that the suppression of triplet excitons formation in the near-infrared-absorbing acceptor by molecular design is an effective way to improve the photovoltaic performance of the tandem organic solar cells.

High-Performance Small Molecule Organic Solar Cells Enabled by a Symmetric-Asymmetric Alloy Acceptor with a Broad Composition Tolerance.

Using a combinatory blending strategy is demonstrated as a promising path for designing efficient organic solar cells (OSCs) by boosting the short-circuit current density and fill factor. Herein, a high-performance ternary all-small molecule OSC (all-SMOSCs) using a narrow-bandgap alloy acceptor containing symmetric and asymmetric molecules (BTP-eC9 and SSe-NIC) and a wide-bandgap small molecule donor MPhS-C2 is reported. Introducing the synthesized SSe-NIC into the MPhS-C2:BTP-eC9 host system can broaden the absorption spectrum, modulate energy offsets, and optimize the molecular packing of the host materials. After systematically optimizing the weight ratio of MPhS-C2:BTP-eC9:SSe-NIC, a champion efficiency of 18.02% is achieved. Impressively, the ternary system not only delivered a broad composition tolerance with device efficiencies over 17% throughout the whole blend ratios, but also exhibited less non-geminate recombination and energy loss, and better-light-soaking stability than the corresponding binary systems. This work promotes the development of high-performance ternary all-SMOSCs and heralds their brighter application prospects.

Reconfiguring band-edge states and charge distribution of organic semiconductor-incorporated 2D perovskites via pressure gating.

Two-dimensional (2D) semiconductor heterostructures are key building blocks for many electronic and optoelectronic devices. Reconfiguring the band-edge states and modulating their interplay with charge carriers at the interface in a continuous manner have long been sought yet are challenging. Here, using organic semiconductor-incorporated 2D halide perovskites as the model system, we realize the manipulation of band-edge states and charge distribution via mechanical-rather than chemical or thermal-regulation. Compression induces band-alignment switching and charge redistribution due to the different pressure responses of organic and inorganic building blocks, giving controllable emission properties of 2D perovskites. We propose and demonstrate a "pressure gating" strategy that enables the control of multiple emission states within a single material. We also reveal that band-alignment transition at the organic-inorganic interface is intrinsically not well resolved at room temperature owing to the thermally activated transfer and shuffling of band-edge carriers. This work provides important fundamental insights into the energetics and carrier dynamics of hybrid semiconductor heterostructures.

Achieving efficient and stabilized organic solar cells by precisely controlling the proportion of copolymerized units in electron-rich polymers.

A series of random polymers based on the donor polymer PM6 were designed from the perspective of regulating the surface electrostatic potential (ESP) distribution of the polymers and applied in organic solar cells (OSCs). Random polymers with different ESPs were obtained by introducing structural units of polymer PM6 into the polymer structure as the third unit. The simulation results showed that the random polymers feature a wider electron-donating region after the introduction of BDT units, indicating a more efficient charge generation probability. Benefiting from the optimized morphology of the active layer and the stronger interaction between the donor and the acceptor in the active layer, the device exhibited the best charge transport efficiency and lower charge recombination after the introduction of 5% BDT units, and a high power conversion efficiency (PCE) of 16.76% was achieved. In addition, OSC devices based on random polymers incorporating 5% BDT units exhibit excellent device stability. In contrast, the devices based on random polymers after the introduction of BDD units showed a much lower PCE of around 13% due to the inferior charge generation and charge transport. This work not only provides a new perspective for the molecular design of efficient random polymers, but also demonstrates that the OSC devices based on random polymers can still achieve better stability.