Enhancing Conjugation Effect to Develop Nitrogen-Rich Energetic Materials with Higher Energy and Stability.

This work reports a strategy by enhancing conjugation effect and synthesizes a symmetrical and planar compound, 1,2-bis (4,5-di(1H-tetrazol-5-yl)-2H-1,2,3-triazol-2-yl)diazene (NL24). The incorporation of azo and 1,2,3-triazole moieties manifests a synergistic effect, amplifying the conjugation effect of the azo bridge and thereby elevating the stability of NL24 (Td: 263 °C, IS: 7 J). Notably, NL24, possessing a structural configuration comprising four tetrazoles harboring a total of 24 nitrogen atoms, exhibits excellent detonation performances (ΔHf: 6.06 kJ g-1, VD: 9002 m s-1). This strategy achieves the balance of energy and stability of polycyclic tetrazoles and provides a direction for high-performance energetic materials.

Thermodynamic Analysis and Pyrolysis Mechanism of 4,4'-Azobis-1,2,4-triazole.

The nonisothermal thermal decomposition kinetics of 4,4'-azobis-1,2,4-triazole (ATRZ) at different heating rates (5, 10, 15, and 20 °C·min-1) were investigated by thermogravimetry (TG) and differential scanning calorimetry (DSC) studies. The thermal decomposition kinetic parameters such as apparent activation energy (E) and pre-exponential factor (A) were calculated by the Kissinger, Ozawa, and Satava-Sestak methods. The E and A values calculated by the above three methods are very close, which are 391.1 kJ·mol-1/1034.92 s-1, 381.1 kJ·mol-1/1034.30 s-1, and 393.4 kJ·mol-1/1035.76 s-1, respectively. Then, the decomposition mechanism function of ATRZ is analyzed by the calculated results. The results show that the decomposition temperature of ATRZ is about 300 °C and the exothermic decomposition speed is fast. The decomposition pathway of ATRZ was analyzed by pyrolysis-gas chromatography-mass spectrometry (PY-GC-MS). The thermal decomposition kinetic equation of the ATRZ was deduced.

Polyvalent Ionic Energetic Salts Based on 4-Amino-3-hydrazino-5-methyl-1,2,4-triazole.

The synthesis of the new energetic material 4-amino-3-hydrazino-5-methyl-1,2,4-triazole, which shows excellent performance and reliable safety, has drawn attention recently. To fully characterize this material, a comprehensive analysis was performed using various techniques, including differential scanning calorimetry (DSC), infrared spectroscopy (IR), elemental analysis, and 1H and 13C NMR spectroscopy. Additionally, three compounds, 3, 5 and 9, were further characterized using single X-ray diffraction. The X-ray data suggested that extensive hydrogen bonds affect molecular structure by means of intermolecular interactions. In order to evaluate the explosive properties of these synthesized compounds, detonation pressures and velocities were calculated using EXPLO5 (V6.01). These calculations were carried out utilizing experimental data, including density and heat of formation. Among the explosives tested, compounds 7 and 8 exhibited zero oxygen balance and demonstrated exceptional detonation properties. Compound 7 achieved the highest recorded detonation pressure, at 34.2 GPa, while compound 8 displayed the highest detonation velocity, at 8887 m s-1.

Seedless mutant 'Wuzi Ougan' (Citrus suavissima Hort. ex Tanaka 'seedless') and the wild type were compared by iTRAQ-based quantitative proteomics and integratedly analyzed with transcriptome to improve understanding of male sterility.

BACKGROUND: Bud mutation is a vital method of citrus. 'Wuzi Ougan' (mutant type, MT) as a bud variant of 'Ougan' (wild type, WT) was first found in 1996 and has become popular because of its male sterility and seedless character. Previous analysis of its cytological sections and transcriptome revealed that the abnormal microsporogenesis that occurs before the tetrad stage of anther development might be the result of down-regulated oxidation-reduction biological processes in MT. To reveal the mechanism behind the male sterility in MT at the post-transcriptional stage, proteome profiling and integrative analysis on previously obtained transcriptome and proteome data were performed in two strains. RESULTS: The proteome profiling was performed by iTRAQ (isobaric Tags for relative and absolute quantitation) analysis and 6201 high-confidence proteins were identified, among which there were 487 differentially expressed proteins (DEPs) in one or more developmental stages of anthers between MT and WT. The main functional subcategories associated with the main category biological process into which the DEPs were classified were sporopollenin biosynthesis process and pollen exine formation. The enriched pathways were phenylpropanoid biosynthesis, flavonoid biosynthesis, and phenylalanine metabolism. Moreover, there were eight pathways linked in terms of being related to phenylpropanoid metabolism. Eighteen important genes related to phenylpropanoid metabolism were also analysized by qRT-PCR (quantitative real time PCR). An integrative analysis of the fold change at the transcript (log2 FPKM ratios) and protein (log1.2 iTRAQ ratios) levels was performed to reveal the consistency of gene expression at transcriptional and proteomic level. In general, the expression of genes and proteins tended to be positively correlated, in which the correlation coefficients were 0.3414 (all genes and all proteins) and 0.5686 (DEPs and according genes). CONCLUSION: This study is the first to offer a comprehensive understanding of the gene regulation in 'Wuzi Ougan' and its wild type, especially during the microsporocyte to meiosis stage. Specifically, the involved genes include those in phenylpropanoid biosynthesis, flavonoid biosynthesis, and phenylalanine metabolism, as determined by integrative transcriptome and proteome analysis.

Adsorption of polyethylene-glycolated bovine serum albumin on macroporous and polymer-grafted anion exchangers.

The chromatographic and adsorptive properties of BSA and BSA conjugated with 10 and 30kDa PEG polymers are determined for a macroporous anion exchanger (UNOsphere™ Diol Q) and for a polymer-grafted material having the same backbone matrix (Nuvia Q™). Chromatographic retention, adsorption capacity, and adsorption kinetics are enhanced in the polymer-grafted resin for both BSA and 10kDa PEG-BSA as a result of interactions with the grafted polymers. However, the difference between the two resins diminishes for 30kDa PEG-BSA indicating that size exclusion effects strongly affect binding in the polymer-grafted material for this larger conjugate. Images of intraparticle concentration profiles obtained by confocal scanning laser microscopy show that the transport mechanisms of both BSA and PEGylated BSA are very different in the two resins. The protein binding kinetics are dominated by ordinary pore diffusion and are essentially independent of the direction of transport for UNOsphere Diol Q as a result of its large pore size. Thus, for this material, displacement of PEGylated BSA by BSA is clearly evident at the intraparticle scale. On the other hand, the protein binding kinetics in Nuvia Q are consistent with a solid diffusion mechanism driven by the adsorbed protein concentration. For this material, protein transport is very fast for one component or two-component co-adsorption of BSA and PEGylated BSA but slows down dramatically for sequential adsorption of these species as a result of heightened diffusional hindrance when the two components counterdiffuse within the resin.

Effects of ligand density and pore size on the adsorption of bovine IgG with DEAE ion-exchange resins.

Immunoglobulin G is an important plasma protein with many applications in therapeutics and diagnostics, which can be purified effectively by ion exchange chromatography. The ligand densities and pore properties of ion-exchange resins have significant effects on the separation behaviors of protein, however, the understandings are quite limited. In this work, with bovine immunoglobulin as the model IgG, the adsorption isotherms and adsorption kinetics were investigated systematically with series of diethylaminoethyl ion-exchange resins with different ligand densities and pore sizes. The Langmuir equation and pore diffusion model were used to fit the experimental data. The influences of ligand density and pore size on the saturated adsorption capacity, the dissociation constant and the effective diffusivity were discussed. The adsorption capacities increased with the increase of ligand density and the decrease of pore size, and an integrative parameter was proposed to describe the combined effects of ligand density and pore size. It was also found that the effective pore diffusion coefficient of the adsorption kinetics was influenced by pore sizes of resins, but was relatively independent on the ligand densities of resins. For a given protein, the ligand density and pore size should be optimized for improving the protein adsorption.

Protein adsorption on DEAE ion-exchange resins with different ligand densities and pore sizes.

Ion exchange chromatography (IEC) is a common and powerful technique for the purification of proteins. The ligand density and pore properties of ion-exchange resins have significant effects on the separation behaviors of protein, however, the understandings are quite limited. In the present work, the adsorption isotherms of bovine serum albumin (BSA) and human serum albumin (HSA) were investigated systematically with series of diethylaminoethyl (DEAE) ion-exchange resins, which have different ligand densities and pore sizes. The Langmuir equation was used to fit the experimental data and the influences of ligand density and pore size on the saturated adsorption capacity and the dissociation constant were discussed. The zeta potentials and hydrodynamic diameters of proteins at different pHs were also measured, and the surface charge characteristics of proteins and the adsorption mechanism were discussed. The results demonstrated that the ligand density, pore size, and protein properties affect the protein adsorption capacities in an integrative way. An integrative parameter was introduced to describe the complicated effects of ligand density and pore size on the protein adsorption. For a given protein, the ligand density and pore size should be optimized for improving the protein adsorption.