Revealing Lithium Nitrate-Mediated Solid-Electrolyte Interphase of Lithium Metal Anode via Cryogenic Transmission Electron Microscopy.

The cycle stability of lithium metal anode (LMA) largely depends on solid-electrolyte interphase (SEI). Electrolyte engineering is a common strategy to adjust SEI properties, yet understanding its impact is challenging due to limited knowledge on ultrafine SEI structures. Herein, using cryogenic transmission electron microscopy, we reveal the atomic-level SEI structure of LMA in ether-based electrolytes, focusing on the role of LiNO3 additives in SEI modulation at different temperature (25 and 50 °C). Poor cycle stability of LMA in the baseline electrolyte without LiNO3 additives stems from the Li2CO3-rich mosaic-type SEI. Increased LiNO3 content and elevated operating temperature enhance cyclic performance by forming bilayer or multilayer SEI structures via preferential LiNO3 decomposition, but may thicken the SEI, leading to reduced initial Coulombic efficiency and increased overpotential. The optimal SEI features a multilayer structure with Li2O-rich inner layer and closely packed grains in the outer layer, minimizing electrolyte decomposition or corrosion.

Amorphous Oxyhalide Matters for Achieving Lithium Superionic Conduction.

The recently surged halide-based solid electrolytes (SEs) are great candidates for high-performance all-solid-state batteries (ASSBs), due to their decent ionic conductivity, wide electrochemical stability window, and good compatibility with high-voltage oxide cathodes. In contrast to the crystalline phases in halide SEs, amorphous components are rarely understood but play an important role in Li-ion conduction. Here, we reveal that the presence of amorphous component is common in halide-based SEs that are prepared via mechanochemical method. The fast Li-ion migration is found to be associated with the local chemistry of the amorphous proportion. Taking Zr-based halide SEs as an example, the amorphization process can be regulated by incorporating O, resulting in the formation of corner-sharing Zr-O/Cl polyhedrons. This structural configuration has been confirmed through X-ray absorption spectroscopy, pair distribution function analyses, and Reverse Monte Carlo modeling. The unique structure significantly reduces the energy barriers for Li-ion transport. As a result, an enhanced ionic conductivity of (1.35 ± 0.07) × 10-3 S cm-1 at 25 °C can be achieved for amorphous Li3ZrCl4O1.5. In addition to the improved ionic conductivity, amorphization of Zr-based halide SEs via incorporation of O leads to good mechanical deformability and promising electrochemical performance. These findings provide deep insights into the rational design of desirable halide SEs for high-performance ASSBs.

Sub-3 nm Pt@Ru toward Outstanding Hydrogen Oxidation Reaction Performance in Alkaline Media.

Anion-exchange membrane fuel cells (AEMFCs) are promising alternative hydrogen conversion devices. However, the sluggish kinetics of the hydrogen oxidation reaction in alkaline media hinders further development of AEMFCs. As a synthesis method commonly used to prepare disordered PtRu alloys, the impregnation process is ingeniously designed herein to synthesize sub-3 nm Pt@Ru core-shell nanoparticles by sequentially reducing Pt and Ru at different annealing temperatures. This method avoids complex procedures and synthesis conditions for organic synthesis systems, and the atomic structure evolution of the synthesized core-shell nanoparticles can be tracked. The synthesized Pt@Ru electrocatalyst shows an ultrasmall average size of ∼2.5 nm and thereby a large electrochemical surface area (ECSA) of 166.66 m2 gPt+Ru-1. Exchange current densities (j0) normalized to the mass (Pt + Ru) and ECSA of this electrocatalyst are 8.0 and 5.8 times as high as those of commercial Pt/C, respectively. To the best of our knowledge, the achieved mass-normalized j0 measured by rotating disk electrodes is the highest reported so far. The membrane electrode assembly test of the Pt@Ru electrocatalyst shows a peak power density of 1.78 W cm-2 (0.152 mgPt+Ru cmanode-2), which is higher than that of commercial PtRu/C (1.62 W cm-2, 0.211 mgPt+Ru cmanode-2). The improvement of the intrinsic activity can be attributed to the electron transfer from the Ru shell to the Pt core, and the ultrafine particles further enhance the mass activity. This work reveals the feasibility of using simple impregnation to synthesize fine core-shell nanocatalysts and the importance of investigating the atomic structure of PtRu nanoparticles and other disordered alloys.

Differing Electrolyte Implication on Anion and Cation Intercalation into Graphite.

Emerging dual-graphite batteries (DGBs) capture extensive interest for their high output voltage and exceptional cost-effectiveness. Yet, developing electrolytes compatible with both the cathode and anode stands to be a tremendous challenge, and how electrolyte impacts anion and cation intercalation into graphite remains inexplicit or controversial. Herein, we have evaluated the performance of graphite anode and cathode in typical ethyl methyl carbonate (EMC) based electrolytes and unveiled their electrode-electrolyte interphase using Cryogenic transmission electron microscopy (Cryo-TEM). The addition of fluoroethylene carbonate (FEC) brings substantial improvement in cycle stability and Coulombic efficiency for both the graphite cathode and anode, but its implication on cation and anion intercalation differs. FEC is involved in anodic side reactions to produce a LiF-embedded solid-electrolyte interphase layer. It is much thinner and more uniform than that formed in the electrolyte without FEC, which is correlated with less graphite exfoliation and enhanced stability. As for the graphite cathode, both basal and edge planes are largely bare, and only few scattered byproducts are found. In addition, we also reveal layer bending and local lattice disordering of the graphite cathode based on multiple Cryo-TEM images, which are speculated to be caused by high lattice strain induced by anion intercalation and local oxidation under high voltage. The absence of cathode-electrolyte interphase (CEI) layers overturns the paradigm of attributing cathodic performance to CEI features and is regarded as a fundamental reason for severe self-discharge of graphite cathode. FEC helps to alleviate graphite exfoliation issues and enhance cycle stability, and we ascribe it to weakened solvation, which means reduced probability of solvent co-intercalation during charging, rather than compositional changes of cathodic byproducts.

A General and Ultrafast Polishing Method with Truly Atomic Roughness.

The advancement of science and technology is always accompanied by better manufacturing precision. Ideally, the highest precision for manufacturing a surface is truly atomic flatness, which implies that all topmost surface atoms are in a single layer of the crystal face. However, almost no methods can achieve this surface with high efficiency at present. Herein, we present a method to fabricate a large-scale truly atomically flat surface with ultrafast speed. Through the selective etching of surface atoms, our method can achieve an atomically flat surface with 0.05 nm Sa roughness. It is notable that the polishing efficiency of our method is more than 1000 times higher than that of conventional methods. We have demonstrated its generality on various single-crystal materials and obtained atomic roughness and an ultrahigh polishing rate. This method has the potential to promote the mass-production of atomic-scale smooth surfaces, the application of third-generation semiconductor materials, and the innovation of advanced technologies.

Corrigendum to "A facile room temperature method to recycle Cd from CdS" [Heliyon 9(4) (April 2023) e15229].

[This corrects the article DOI: 10.1016/j.heliyon.2023.e15229.].

Catalytic Chemistry Derived Artificial Solid Electrolyte Interphase for Stable Lithium Metal Anodes Working at 20†mA cm-2 and 20†mAh cm-2.

A stable solid electrolyte interphase (SEI) layer is crucial for lithium metal anode (LMA) to survive in long-term cycling. However, chaotic structures and chemical inhomogeneity of natural SEI make LMA suffering from exasperating dendrite growth and severe electrode pulverization, which hinder the practical application of LMAs. Here, we design a catalyst-derived artificial SEI layer with an ordered polyamide-lithium hydroxide (PA-LiOH) bi-phase structure to modulate ion transport and enable dendrite-free Li deposition. The PA-LiOH layer can substantially suppress the volume changes of LMA during Li plating/stripping cycles, as well as alleviate the parasitic reactions between LMA and electrolyte. The optimized LMAs demonstrate excellent stability in Li plating/stripping cycles for over 1000 hours at an ultra-high current density of 20 mA cm-2 in Li||Li symmetric cells. A high coulombic efficiency up to 99.2 % in Li half cells in additive-free electrolytes is achieved even after 500 cycles at a current density of 1 mA cm-2 with a capacity of 1 mAh cm-2 .

A high-precision multi-dimensional microspectroscopic technique for morphological and properties analysis of cancer cell.

Raman and Brillouin scattering are sensitive approaches to detect chemical composition and mechanical elasticity pathology of cells in cancer development and their medical treatment researches. The application is, however, suffering from the lack of ability to synchronously acquire the scattering signals following three-dimensional (3D) cell morphology with reasonable spatial resolution and signal-to-noise ratio. Herein, we propose a divided-aperture laser differential confocal 3D Geometry-Raman-Brillouin microscopic detection technology, by which reflection, Raman, and Brillouin scattering signals are simultaneously in situ collected in real time with an axial focusing accuracy up to 1 nm, in the height range of 200 µm. The divided aperture improves the anti-noise capability of the system, and the noise influence depth of Raman detection reduces by 35.4%, and the Brillouin extinction ratio increases by 22 dB. A high-precision multichannel microspectroscopic system containing these functions is developed, which is utilized to study gastric cancer tissue. As a result, a 25% reduction of collagen concentration, 42% increase of DNA substances, 17% and 9% decrease in viscosity and elasticity are finely resolved from the 3D mappings. These findings indicate that our system can be a powerful tool to study cancer development new therapies at the sub-cell level.

A facile room temperature method to recycle Cd from CdS.

Cadmium-based semiconductors have a wide range of applications in light-emitting, energy conversion, photodetection and artificial photosynthesis. With the concern about the potential toxicity of Cd, it is necessary to recycle the element from the Cd based semiconductors. Commonly, the precipitation of Cd cations with S2- is deemed as the end point of recycling. However, actually, CdS is easy to be oxidized and released into the environment and accumulate in the food chain. It still remains challenges on how to refine the Cd element and convert it to the raw material. Herein, we demonstrate a facile room temperature method for recycling Cd from CdS. Cd can be produced from CdS within 3 h with the help of the lithium-ethylenediamine solution. DFT calculations further confirm that the high surface energy of (100) and (101) planes are selectively attacked by the solvated electrons in the solution, which is in good accordance with the XRD, STEM-HAADF and XPS characterizations. With a total recovery efficiency of 88%, Cd is successfully recovered from the CdS powder. This method provides a new perspective on the treatment of Cd-based semiconductor waste, which is of great significance for the recycling of cadmium metal.

Revealing Structural Insights of Solid Electrolyte Interphase in High-Concentrated Non-Flammable Electrolyte for Li Metal Batteries by Cryo-TEM.

High-concentrated non-flammable electrolytes (HCNFE) in lithium metal batteries prevent thermal runaway accidents, but the microstructure of their solid electrolyte interphase (SEI) remains largely unexplored, due to the lack of direct imaging tools. Herein, cryo-HRTEM is applied to directly visualize the native state of SEI at the atomic scale. In HCNFE, SEI has a uniform laminated crystalline-amorphous structure that can prevent further reaction between the electrolyte and lithium. The inorganic SEI component, Li2 S2 O7 , is precisely identified by cryo-HRTEM. Density functional theory (DFT) calculations demonstrate that the final Li2 S2 O7 phase has suitable natural transmission channels for Li-ion diffusion and excellent ionic conductivity of 1.2 × 10-5 S cm-1 .

Effects of SARS-CoV-2 vaccine (Vero cells) on disease activity in patients with inflammatory bowel disease in China: a multicenter study.

AIMS: To evaluate the impact of SARS-CoV-2 vaccine on IBD activity. METHODS: Adult IBD patients from five large IBD centers in China were enrolled and followed up for 6 months. Patients were divided into vaccinated and unvaccinated groups according to vaccination status. Demographic and clinical data were collected. RESULTS: A total of 280 individuals (213 UC and 67 CD patients) were enrolled in the study. The unvaccinated and vaccinated groups of UC patients were comparable for basic characteristics, including age (t = - 0.8, p = 0.425), sex (χ2 = 0.980, p = 0.322), course of disease (z = - 0.513, p = 0.608), surgical conditions (χ2 = 1.042, p = 0.838), disease extent (χ2 = 4.853, p = 0.088), or baseline drug therapy (χ2 = 7.784, p = 0.064). In the subgroup of UC patients, there was no association between vaccination and disease activities, according to the medium disease activity scores for two groups: unvaccinated patients having scores (IQR) 1(2.75), 1(2), 1(2), and 1(2) at baseline, 1, 3, and 6 months, respectively, whereas vaccinated patients having scores (IQR) 1(2), 1(2), 1(2), and 1(2). Similar conclusions were also derived in the subgroup of CD patients. There were also no statistically significant differences in age (t = - 1.48, p = 0.144), sex (χ2 = 0.003, p = 0.957), course of disease (z = - 0.074, p = 0.941), surgical conditions (χ2 = 0.613, p = 0.594), localization (χ2 = 6.261, p = 0.199), or baseline drug therapy (χ2 = 5.881, p = 0.114) between 2 groups of CD patients. The medium disease activity scores (IQR) of the unvaccinated group at baseline, 1, 3, and 6 months were 1(4), 1(3), 1(3), and 1(3), respectively, whereas those of vaccinated group were 2.5(3.75), 2.5(3.75), 3(2), and 2(2), respectively. Overall, very few participants in this study described worsening IBD disease activity requiring a change or addition of medication. CONCLUSIONS: SARS-CoV-2 vaccine has no adverse effect on disease activity in IBD population. IBD patients should be recommended to receive SARS-CoV-2 vaccine in time.

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries.

High-energy Ni-rich layered oxide cathode materials such as LiNi0.8Mn0.1Co0.1O2 (NMC811) suffer from detrimental side reactions and interfacial structural instability when coupled with sulfide solid-state electrolytes in all-solid-state lithium-based batteries. To circumvent this issue, here we propose a gradient coating of the NMC811 particles with lithium oxy-thiophosphate (Li3P1+xO4S4x). Via atomic layer deposition of Li3PO4 and subsequent in situ formation of a gradient Li3P1+xO4S4x coating, a precise and conformal covering for NMC811 particles is obtained. The tailored surface structure and chemistry of NMC811 hinder the structural degradation associated with the layered-to-spinel transformation in the grain boundaries and effectively stabilize the cathode|solid electrolyte interface during cycling. Indeed, when tested in combination with an indium metal negative electrode and a Li10GeP2S12 solid electrolyte, the gradient oxy-thiophosphate-coated NCM811-based positive electrode enables the delivery of a specific discharge capacity of 128 mAh/g after almost 250 cycles at 0.178 mA/cm2 and 25 °C.

Expression of 5-HT Relates to Stem Cell Marker LGR5 in Patients with Gastritis and Gastric Cancer.

BACKGROUND: 5-Hydroxytryptamine (5-HT) and stem cells marker G-protein-coupled receptor 5 (LGR5) are associate with gastrointestinal inflammation and tumorigenesis. But the relationship between 5-HT and LGR5 is unclear. OBJECTIVE: To explore the expression and correlation of 5-HT and LGR5 in gastric mucosa of patients with gastritis and gastric cancer (GC). METHODS: A total of 41 patients with GC and 98 patients with chronic gastritis were included in this study. The expression of TPH1 mRNA, LGR5 mRNA and ß-catenin mRNA in gastric mucosa were explored by Real-time Quantitative polymerase chain reaction (qPCR). 5-HT-positive cells and LGR5-positive cells in gastric mucosa were detected by immunohistochemistry stains. The co-localization of 5-HT and chromogranin A (CgA), 5-HT receptor4 (5-HTR4) and LGR5 were detected by multiplex immunofluorescence. RESULTS: The expression of 5-HT and LGR5 in patients with GC was significantly higher than patients with chronic gastritis (p < 0.05). The positive rate of 5-HT and LGR5 increased sequentially in the patients with non-atrophic gastritis, intestinal metaplasia and GC, which were 18.52%, 35.56% and 75.61% for 5-HT, and 27.78%, 40.91% and 95.12% for LGR5, respectively. The expression of 5-HT and LGR5 was positively correlated in gastritis and GC patients (p < 0.05). Moreover, the expression level of TPH1 mRNA and LGR5 mRNA was also positively correlated in gastritis patients (r = 0.7377, p < 0.001). Besides, 5-HT was partially co-localized with CgA, and 5-HTR4 was co-localized with LGR5 in gastric mucosa. CONCLUSION: The increase of 5-HT synthesis in gastric mucosa may have an impact on LGR5-positive gastric epithelial stem cells.

Na-K Alloy Anode for High-Performance Solid-State Sodium Metal Batteries.

Rechargeable solid-state Na metal batteries (SSNMB) can offer high operational safety and energy density. However, poor solid-solid contact between the electrodes and the electrolyte can dramatically increase interfacial resistance and Na dendrite formation, even at low current rates. Therefore, we developed a carbon-fiber-supported liquid Na-K alloy anode that ensures close anode-electrolyte contact, enabling superior cycle stability and rate capability. We then demonstrated the first cryogenic transmission electron microscopy (cryo-TEM) characterization of an SSNMB, capturing the evolution of solid-electrolyte interphase (SEI) and revealing both crystalline and amorphous phases, which could facilitate ion transport and prevent continuous side reactions. By enhancing contact between the Na-K alloy and solid-state electrolyte, these symmetric cells are capable of cycling for over 800 h without notable increased polarization and enable an unprecedented critical current density (CCD) at 40 mA cm-2. Our liquid Na-K alloy approach offers a promising strategic avenue toward commercial SSNMBs.

Synthesis of stable γ-phase MnS1-xSex nanoflakes with inversion symmetry breaking.

Inversion symmetry breaking plays a critical role in the formation of magnetic skyrmions. Therefore, for the application of skyrmion-based devices, it is important to develop novel engineering techniques and explore new non-centrosymmetric lattices. In this paper, we report the rational synthesis of stable γ-phase MnS1-xSex (0 ≤ x ≤ 0.45) nanoflakes with an asymmetric distribution of the elemental content, which persists on inversion symmetry breaking. The temperature dependence of resonant second-harmonic generation characterization reveals that a non-centrosymmetric crystal structure exists in our as-grown γ-phase MnS1-xSex with spatial-inversion symmetry breaking. By tuning the parameters of nucleation temperature and growth time, we produced a detailed growth phase diagram, revealing a controllable as-grown structure evolution from γ-phase wurtzite-type to α-phase rock-salt type structure of MnS1-xSex nanoflakes. Our work provides a new playground to explore novel materials that have broken inversion symmetry.

Enabling Ultrastable Alkali Metal Anodes by Artificial Solid Electrolyte Interphase Fluorination.

The high specific capacity of alkalic metal (Li, Na, and K) anodes has drawn widespread interest; however, the practical applications of alkalic metal anodes have been hampered by dendrite growth and interfacial instability, resulting in performance deterioration and even safety issues. Here, we describe a simple method for building tunable fluoride-based artificial solid-electrolyte interphase (SEI) from the fluorination reaction of alkali metals with a mild organic fluorinating reagent. Comprehensive characterization by advanced electron microscopes shows that the LiF-based artificial SEI adopts a crystal-glass structure, which enables efficient Li ion transport and improves structural integrity against the volume changes that occur during Li plating/stripping. Compared with bare Li anode, the ones with artificial SEI exhibit decreased voltage hysteresis, enhanced rate capability, and prolonged cycle life. This method is also applied to generate fluoride-based artificial SEI on Na and K metal anodes that brings significant improvement in battery performance.

Perpendicular Manganite Magnetic Tunnel Junctions Induced by Interfacial Coupling.

The half-metallic manganite oxide La2/3Sr1/3MnO3 (LSMO) has a very high spin polarization of ∼100%, making it ideal for ferromagnetic electrodes to realize tunneling magnetoresistance (TMR). Because of the in-plane magnetic anisotropy of the ferromagnetic LSMO electrode, which leads to the density limit of memory, realizing perpendicular tunneling in manganite-based magnetic tunnel junctions (MTJ) is critical for future applications. Here, we design and fabricate manganite-based MTJs composed of alternately stacked cobaltite and manganite layers that demonstrate strong perpendicular magnetic anisotropy (PMA) induced by interfacial coupling. Moreover, spin-dependent tunneling behaviors with an out-of-plane magnetic field were observed in the perpendicular MTJs. We found that the direct tunneling effect plays a dominant role in the low bias region during the transport behavior of devices, which is associated with thermionic emission of electrons or oxygen vacancies in the high bias region. Our works of realizing perpendicular tunneling in manganite-based MTJs lead to new approaches for designing and developing all-oxide spintronic devices.

New insights into phenotypic heterogeneity for the distinct lipid accumulation of Schizochytrium sp. H016.

BACKGROUND: Schizochytrium sp. is a marine heterotrophic protist and an important sustainable resource for high value-added docosahexaenoic acid in the future. The production of different phenotypes during the continuous subculture of Schizochytrium sp. results in a serious reduction in lipid yield and complicates the used of this strain in scientific research and industrial production. Hence, obtaining an improved understanding of the phenotypic differences and molecular mechanisms underlying the cell-to-cell heterogeneity of Schizochytrium sp. is necessary. RESULTS: After continuous culture passage, Schizochytrium sp. H016 differentiated into two subpopulations with different morphologies and showed decreased capacity for lipid production. The presence of cell subpopulations with degraded lipid droplets led to a substantial decrease in overall lipid yield. Here, a rapid screening strategy based on fluorescence-activated cell sorting was proposed to classify and isolate subpopulations quickly in accordance with their lipid-producing capability. The final biomass and lipid yield of the subpopulation with high cell lipid content (i.e., H016-H) were 38.83 and 17.22 g/L, respectively, which were 2.07- and 5.38-fold higher than those of the subpopulation with low lipid content (i.e., H016-L), respectively. Subsequently, time­resolved transcriptome analysis was performed to elucidate the mechanism of phenotypic heterogeneity in different subpopulations. Results showed that the expression of genes related to the cell cycle and lipid degradation was significantly upregulated in H016-L, whereas the metabolic pathways related to fatty acid synthesis and glyceride accumulation were remarkably upregulated in H016-H. CONCLUSION: This study innovatively used flow cytometry combined with transcriptome technology to provide new insights into the phenotypic heterogeneity of different cell subpopulations of Schizochytrium sp. Furthermore, these results lay a strong foundation for guiding the breeding of oleaginous microorganisms with high lipid contents.

Insight into the Activity and Selectivity of Nanostructured Copper Titanates during Electrochemical Conversion of CO2 at Neutral pH via In Situ X-ray Absorption Spectroscopy.

The electrochemical conversion of carbon dioxide (CO2) to useful chemical fuels is a promising route toward the achievement of carbon neutral and carbon negative energy technologies. Copper (Cu)- and Cu oxide-derived surfaces are known to electrochemically convert CO2 to high-value and energy-dense products. However, the nature and stability of oxidized Cu species under reaction conditions are the subject of much debate in the literature. Herein, we present the synthesis and characterization of copper-titanate nanocatalysts, with discrete Cu-O coordination environments, for the electrochemical CO2 reduction reaction (CO2RR). We employ real-time in situ X-ray absorption spectroscopy (XAS) to monitor Cu species under neutral-pH CO2RR conditions. Combination of voltammetry and on-line electrochemical mass spectrometry with XAS results demonstrates that the titanate motif promotes the retention of oxidized Cu species under reducing conditions for extended periods, without itself possessing any CO2RR activity. Additionally, we demonstrate that the specific nature of the Cu-O environment and the size of the catalyst dictate the long-term stability of the oxidized Cu species and, subsequently, the product selectivity.

Revealing the Intrinsic Atomic Structure and Chemistry of Amorphous LiO2-Containing Products in Li-O2 Batteries Using Cryogenic Electron Microscopy.

Aprotic lithium-oxygen batteries (LOBs) are promising energy storage systems characterized by ultrahigh theoretical energy density. Extensive research has been devoted to this battery technology, yet the detailed operational mechanisms involved, particularly unambiguous identification of various discharge products and their specific distributions, are still unknown or are subjects of controversy. This is partly because of the intrinsic complexity of the battery chemistry but also because of the lack of atomic-level insight into the oxygen electrodes acquired via reliable techniques. In the current study, it is demonstrated that electron beam irradiation could induce crystallization of amorphous discharge products. Cryogenic conditions and a low beam dosage have to be used for reliable transmission electron microscopy (TEM) characterization. High-resolution cryo-TEM and electron energy loss spectroscopy (EELS) analysis of toroidal discharge particles unambiguously identified the discharge products as a dominating amorphous LiO2 phase with only a small amount of nanocrystalline Li2O2 islands dispersed in it. In addition, uniform mixing of carbon-containing byproducts is identified in the discharge particles with cryo-EELS, which leads to a slightly higher charging potential. The discharge products can be reversibly cycled, with no visible residue after full recharge. We believe that the amorphous superoxide dominating discharge particles can lead researchers to reconsider the chemistry of LOBs and pay special attention to exclude beam-induced artifacts in traditional TEM characterizations.