RESUMEN
In previous work, it was shown that a camera can theoretically be made more colorimetric-its RGBs become more linearly related to XYZ tristimuli-by placing a specially designed color filter in the optical path. While the prior art demonstrated the principle, the optimal color-correction filters were not actually manufactured. In this paper, we provide a novel way of creating the color filtering effect without making a physical filter: we modulate the spectrum of the light source by using a spectrally tunable lighting system to recast the prefiltering effect from a lighting perspective. According to our method, if we wish to measure color under a D65 light, we relight the scene with a modulated D65 spectrum where the light modulation mimics the effect of color prefiltering in the prior art. We call our optimally modulated light, the matched illumination. In the experiments, using synthetic and real measurements, we show that color measurement errors can be reduced by about 50% or more on simulated data and 25% or more on real images when the matched illumination is used.
RESUMEN
When we place a colored filter in front of a camera the effective camera response functions are equal to the given camera spectral sensitivities multiplied by the filter spectral transmittance. In this article, we solve for the filter which returns the modified sensitivities as close to being a linear transformation from the color matching functions of the human visual system as possible. When this linearity condition - sometimes called the Luther condition- is approximately met, the 'camera+filter' system can be used for accurate color measurement. Then, we reformulate our filter design optimisation for making the sensor responses as close to the CIEXYZ tristimulus values as possible given the knowledge of real measured surfaces and illuminants spectra data. This data-driven method in turn is extended to incorporate constraints on the filter (smoothness and bounded transmission). Also, because how the optimisation is initialised is shown to impact on the performance of the solved-for filters, a multi-initialisation optimisation is developed. Experiments demonstrate that, by taking pictures through our optimised color filters, we can make cameras significantly more colorimetric.
RESUMEN
By placing a color filter in front of a camera we make new spectral sensitivities. The Luther-condition optimization solves for a color filter so that the camera's filtered sensitivities are as close to being linearly related to the XYZ color matching functions (CMFs) as possible, that is, a filter is found that makes the camera more colorimetric. Arguably, the more general Vora-Value approach solves for the filter that best matches all possible target spectral sensitivity sets (e.g., any linear combination of the XYZ CMFs). A concern that we investigate here is that the filters found by the Luther and Vora-Value optimizations are different from one another. In this paper, we unify the Luther and Vora-Value approaches to prefilter design. We prove that if the target of the Luther-condition optimization is an orthonormal basis-a special linear combination of the XYZ CMFs which are orthogonal and are in unit length-the discovered Luther-filter is also the filter that maximizes the Vora-Value. A key advantage of using the Luther-condition formulation to maximize the Vora-Value is that it is both simpler to implement and converges to its optimal answer more quickly. Experiments validate our method.
RESUMEN
In this paper, the effect of sodium alginate (SA) on the flotation separation of molybdenite (MoS2) from chalcopyrite using kerosene as collector was systematically investigated. The results of single-mineral micro-flotation tests indicated that SA exhibited strong depression on chalcopyrite flotation while it imposed no impact on the floatability of molybdenite. However, in the chalcopyrite-molybdenite mixed-mineral flotation system, the presence of chalcopyrite significantly increased the depressing effect of SA on molybdenite flotation, leading to a considerable reduction in the flotation selectivity. The negative impact of chalcopyrite on the performance of SA in molybdenite flotation was eliminated by adding a certain dosage of kerosene prior to SA. A concentrate containing 53.43% of molybdenum (Mo) was obtained at 76.90% of recovery using 19 mg/L kerosene and 40 mg/L SA at pH 5.4. Zeta potential measurements indicated that the adsorption of SA on chalcopyrite surfaces was stronger than that on molybdenite surfaces, which agreed with the single-mineral flotation test results. The adsorption of SA on chalcopyrite was further confirmed to be chemisorption by Fourier-transform infrared spectroscopy (FTIR) spectra analyses. When Cu2+ appeared in solution, the flotation of molybdenite was strongly depressed by SA. Mechanism analyses indicated that more active sites were generated on molybdenite surfaces after the addition of Cu2+, thus promoting the adsorption of SA.
RESUMEN
Memory colors generated continuous interest in the color community. Previous studies focused on reflecting color chips and color samples in real scenes or on monitors. The cognitive effect of culture was rarely considered. In this paper, we performed a comprehensive investigation of the long-term memory colors of 26 familiar objects using the asymmetric color matching method among Chinese and German observers on a display. Three experiments were conducted to evaluate the variations introduced by culture, context-based gray image, and initial matching color. Memory colors of important objects were collected and representative memory colors were quantified in terms of CIELAB L*, a*, and b* values. The intra- and inter-observer variations were analyzed by mean-color-difference-from-mean values and chromatic ellipses. The effects of different cultural groups and experimental settings were also shown.
RESUMEN
A improved spectral reflectance reconstruction method is developed to transform camera RGB to spectral reflectance for skin images. Rather than using conventional direct or two-step processes, we transform camera RGB to skin reflectance directly using a principal component analysis (PCA) approach. The novelty in our direct method (RGB to spectra) is the use of a skin-specific colour characterisation chart with spectra closer to human skin spectra, and a new database of skin reflectances to derive the PCA bases. The experimental results using the facial images of 17 subjects demonstrate that our new direct method gives a significantly better performance than conventional, two-step methods and direct methods with traditional characterization charts. This new spectral reconstruction algorithm is sufficiently precise to reconstruct spectral properites relating to chromophores and its performance is within the acceptable range for maxillofacial soft tissue prostheses (error < 3 ΔE*ab units).