Extreme Li-Mg selectivity via precise ion size differentiation of polyamide membrane.

Achieving high selectivity of Li+ and Mg2+ is of paramount importance for effective lithium extraction from brines, and nanofiltration (NF) membrane plays a critical role in this process. The key to achieving high selectivity lies in the on-demand design of NF membrane pores in accordance with the size difference between Li+ and Mg2+ ions, but this poses a huge challenge for traditional NF membranes and difficult to be realized. In this work, we report the fabrication of polyamide (PA) NF membranes with ultra-high Li+/Mg2+ selectivity by modifying the interfacial polymerization (IP) process between piperazine (PIP) and trimesoyl chloride (TMC) with an oil-soluble surfactant that forms a monolayer at oil/water interface, referred to as OSARIP. The OSARIP benefits to regulate the membrane pores so that all of them are smaller than Mg2+ ions. Under the solely size sieving effect, an exceptional Mg2+ rejection rate of over 99.9% is achieved. This results in an exceptionally high Li+/Mg2+ selectivity, which is one to two orders of magnitude higher than all the currently reported pressure-driven membranes, and even higher than the microporous framework materials, including COFs, MOFs, and POPs. The large enhancement of ion separation performance of NF membranes may innovate the current lithium extraction process and greatly improve the lithium extraction efficiency.

Zero-Oil-Fouling Membrane With High Coverage of Grafted Zwitterionic Polymer for Separation of Oil-in-Water Emulsions.

Current hydrophilic modification strategies improve the antifouling ability of membranes but fail to completely eliminate the fouling of emulsified oil droplets with a wide size distribution. Constructing membranes with superior anti-oil-fouling ability to resist various oil droplets especially at high permeation fluxes is challenging. Here, the fabrication of a zero-oil-fouling membrane by grafting considerably high coverage of zwitterionic polymer and building defect-free hydration defense barrier on the surface is reported. A uniform layer of protocatechuic acid with COOH as abundant as existing in every molecule is stably deposited on the membrane so as to provide sufficient reactive sites and achieve dense grafting of the zwitterionic polymer. The coverage of zwitterionic polymer on the membrane plays a crucial role in promoting the antifouling ability to emulsified oil droplets. The poly(vinylidene fluoride) membrane with 93% coverage of the zwitterionic polymer exhibits zero oil fouling when separating multitudinous oil-in-water emulsions with ≈0% flux decline, ≈100% flux recovery, and a high water flux of ≈800 L m-2 h-1 bar-1 . This membrane outperforms almost all of the reported membranes in terms of the comprehensive antifouling performance. This work provides a feasible route for manufacturing super-antifouling membranes toward oil/water separation application.

Maternal NAT10 orchestrates oocyte meiotic cell-cycle progression and maturation in mice.

In mammals, the production of mature oocytes necessitates rigorous regulation of the discontinuous meiotic cell-cycle progression at both the transcriptional and post-transcriptional levels. However, the factors underlying this sophisticated but explicit process remain largely unclear. Here we characterize the function of N-acetyltransferase 10 (Nat10), a writer for N4-acetylcytidine (ac4C) on RNA molecules, in mouse oocyte development. We provide genetic evidence that Nat10 is essential for oocyte meiotic prophase I progression, oocyte growth and maturation by sculpting the maternal transcriptome through timely degradation of poly(A) tail mRNAs. This is achieved through the ac4C deposition on the key CCR4-NOT complex transcripts. Importantly, we devise a method for examining the poly(A) tail length (PAT), termed Hairpin Adaptor-poly(A) tail length (HA-PAT), which outperforms conventional methods in terms of cost, sensitivity, and efficiency. In summary, these findings provide genetic evidence that unveils the indispensable role of maternal Nat10 in oocyte development.

Regulation of molecular transport in polymer membranes with voltage-controlled pore size at the angstrom scale.

Polymer membranes have been used extensively for Angstrom-scale separation of solutes and molecules. However, the pore size of most polymer membranes has been considered an intrinsic membrane property that cannot be adjusted in operation by applied stimuli. In this work, we show that the pore size of an electrically conductive polyamide membrane can be modulated by an applied voltage in the presence of electrolyte via a mechanism called electrically induced osmotic swelling. Under applied voltage, the highly charged polyamide layer concentrates counter ions in the polymer network via Donnan equilibrium and creates a sizeable osmotic pressure to enlarge the free volume and the effective pore size. The relation between membrane potential and pore size can be quantitatively described using the extended Flory-Rehner theory with Donnan equilibrium. The ability to regulate pore size via applied voltage enables operando modulation of precise molecular separation in-situ. This study demonstrates the amazing capability of electro-regulation of membrane pore size at the Angstrom scale and unveils an important but previously overlooked mechanism of membrane-water-solute interactions.

Fast and Integral Nano-Surface-Coating of Various Fiber Materials via Interfacial Polymerization.

Surface coating is essential and critical to endow fiber materials with various functions for broad applications. However, it is still a great challenge to achieve a fast, fully covered, and robust surface coating on multiple fibers. In this work, a nanoscale surface coating with superior stability was rapidly and integrally formed on various fiber materials (such as Nylon mesh, nonwoven fabrics, and stainless-steel mesh) by highly reactive interfacial polymerization (IP) between polyethylenimine (PEI) and trimesoyl chloride (TMC). The resulting polyamide (PA) layer with an ultrathin thickness of tens of nanometers wholly and uniformly covered the surface of each fiber of the constituent material. Due to the synergistic effect of the PA layer with inherent robustness and the fully covered structure between the outer PA layer and the inner fiber, the nanosurface-coating exhibited outstanding mechanical stability, good acid resistance, and excellent organic solvent resistance. The functional modification of the nanosurface-coating can be easily carried out by using the abundant carboxyl groups in the PA layer. By introducing sulfobetaine zwitterionic copolymers via either "grafting from" or "grafting to" methods, the surfaces presented prominent underwater antioil-adhesion property and exceptional protein adhesion resistance. The surface coating based on IP process opens up an avenue in the field of surface modification. It is expected to offer a generally feasible strategy for the fabrication of fiber materials with robust and multifunctional coatings.

Constructing Mechanical Shuttles in a Three-dimensional (3D) Porous Architecture for Selective Transport of Lithium Ions.

Lithium (Li) extraction from brines is a major barrier to the sustainable development of batteries and alloys; however, current separation technology suffers from a trade-off between ion selectivity and permeability. Herein, a crown ether mechanically interlocked 3D porous organic framework (Crown-POF) was prepared as the porous filler of thin-film nanocomposite membranes. Crown-POF with penta-coordinated (four Ocrown atoms and one Ntert-amine atom) adsorption sites enables a special recognition for Li+ ion. Moreover, the four Ntert-amine atoms on each POF branch facilitate the flipping motion of Li+ ion along the skeletal thread, while retaining the specified binding pattern. Accordingly, the crown ether interlocked POF network displays an ultrafast ion transfer rate, over 10 times that of the conventional porous materials. Notably, the nanocomposite membrane gives high speed and selectivity for Li+ ion transport as compared with other porous solid-based mixed-matrix membranes.

MiR-196a-5p facilitates progression of estrogen-dependent endometrial cancer by regulating FOXO1.

BACKGROUND AND PURPOSE: Estrogen-dependent endometrial cancer mainly occurs in younger pre-menopausal and post-menopausal women and threatens their health. Recently, microRNAs (miRNAs) have been considered as novel targets in endometrial cancer treatment. Therefore, we aimed to explore the effect of miRNA (miR)-196a-5p in estrogen-dependent endometrial cancer. METHODS: 17ß-estradiol (E2; 2.5, 5, 10 and 20 nM) was used to treat RL95-2, HEC-1B and ECC-1 cells followed by cell viability assessment using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT). The level of miR-196a-5p was measured by reverse transcription-quantitative PCR (RT-qPCR). We then transfected miR-196a-5p mimic/inhibitor and Forkhead box protein O1 (FOXO1) small interfering RNA (siRNA) into E2-treated cells. Apoptotic cells were measured by flow cytometry. Wound healing and Transwell assays were implemented to assess migration and invasion. Bioinformatics and luciferase reporter assays were applied to confirm the interaction between miR-196a-5p and FOXO1. Immunoblotting determined the levels of FOXO1, Bcl-2, Bax, Caspase 3. RESULTS: E2 promoted cell viability and miR-196a-5p expression in RL95-2 and ECC-1 cells. miR-196a-5p mimic enhanced cell viability, migration and invasion but suppressed apoptosis and FOXO1, whilst miR-196a-5p inhibitor blocked these processes. In addition, miR-196a-5p upregulated Bcl-2, but down regulated Bax and Caspase 3 expression, an effect that was reversed by miR-196a-5p inhibitor. We determined that miR-196a-5p targeted FOXO1, and that si-FOXO1 blocked the effects of miR-196a-5p inhibitor on viability, apoptosis, migration and invasion of E2-treated RL95-2 and ECC-1 cells. CONCLUSIONS: Our findings suggested potential diagnostic and therapeutic applications for miR-196a-5p and its FOXO1 target in patients suffering from estrogen-dependent endometrial cancer.

HIVEP3 as a potential prognostic factor promotes the development of acute myeloid leukemia.

Acute myeloid leukemia (AML) is a common malignancy worldwide. Human immune deficiency virus type 1 enhancer-binding protein 3 (HIVEP3) was verified to play a vital role in types of cancers. However, the functional role of HIVEP3 in AML was rarely reported. In this study, CCK-8, colony formation assay, flow cytometry, and Trans-well chamber experiments were applied for detecting cell proliferation, apoptosis, and invasion in AML cells. The expression of proteins related to TGF-ß/Smad signaling pathway was determined by western blot. Our data showed that the expression level of HIVEP3 was closely related to the risk classification and prognosis of AML patients. Moreover, HIVEP3 was highly expressed in AML patients and cells. Knockdown of HIVEP3 significantly repressed cell proliferation invasion, and enhanced cell apoptosis in HL-60 and THP-1 cells. In addition, HIVEP3 donwreglation could inhibit the TGF-ß/Smad signaling pathway. TGF-ß overexpression could reverse the inhibition effects of HIVEP3 knockdown on AML development and the TGF-ß/Smad signaling pathway. These findings indicated that HIVEP3 contributed to the progression of AML via regulating the TGF-ß/Smad signaling pathway and had a prognostic value for AML.

Lower Platelet-to-Lymphocyte Ratio Was Associated with Poor Prognosis for Newborn Patients in NICU.

Background: Platelet-to-lymphocyte ratio (PLR) is reported to be related to the outcome of intensive care unit (ICU) patients. However, little is known about their associations with prognosis in newborn patients in neonatal ICU (NICU). The aim of the present study was to investigate the prognostic significance of the PLR for newborn patients in the NICU. Methods: Data on newborn patients in the NICU were extracted from the Multiparameter Intelligent Monitoring in Intensive Care III (MIMIC III) database. The initial PLR value of blood examinations within 24 h was analyzed. Spearman's correlation was used to analyze the association of PLR with the length of hospital and ICU stays. The chi-square test was used to analyze the association of PLR with mortality rate. Multivariable logistic regression was used to determine whether the PLR was an independent prognostic factor of mortality. The area under the receiver operating characteristic (ROC) curve was used to assess the predictive ability of models combining PLR with other variables. Results: In total, 5240 patients were enrolled. PLR was negatively associated with length of hospital stay and ICU stay (hospital stay: ρ = −0.416, p < 0.0001; ICU stay: ρ = −0.442, p < 0.0001). PLR was significantly correlated with hospital mortality (p < 0.0001). Lower PLR was associated with higher hospital mortality (OR = 0.85, 95% CI = 0.75−0.95, p = 0.005) and 90-day mortality (OR = 0.85, 95% CI = 0.76−0.96, p = 0.010). The prognostic predictive ability of models combining PLR with other variables for hospital mortality was good (AUC for Model 1 = 0.804, 95% CI = 0.73−0.88, p < 0.0001; AUC for Model 2 = 0.964, 95% CI = 0.95−0.98, p < 0.0001). Conclusion: PLR is a novel independent risk factor for newborn patients in the NICU.

Delineating Molecular Subtypes through Gene Set Variation Analysis Confers Therapeutic and Prognostic Capability in Gastric Cancer.

To claim the features of nontumor tissue in gastric cancer patients, especially in those who have undergone gastrectomy, and to identify the molecular subtypes, we collected the immunogenic and hallmark gene sets from gene set enrichment analysis. The activity changes of these gene sets between tumor (375) and nontumor (32) tissues acquired from the Cancer Genome Atlas (TCGA-STAD) were calculated, and the novel molecular subtypes were delineated. Subsequently, prognostic gene sets were determined using least absolute shrinkage and selection operator (lasso) regression prognostic method. In addition, functional analysis was conducted. Totally, three subtypes were constructed in the present study, and there were differences in survival among three groups. Functional analysis showed genes from normal gene set were related to cell adhesion, and genes from tumor gene set were associated with focal adhesion, PI3K-Akt signaling pathway, regulation of actin cytoskeleton, and VEGF signaling pathway. Our study created lasting value beyond molecular subtypes and underscored the significance of normal tissues in gastric cancer development, which drawn a novel prognostic model for gastric treatment.

Two-dimensional fractal nanocrystals templating for substantial performance enhancement of polyamide nanofiltration membrane.

In this study, we report the emergence of two-dimensional (2D) branching fractal structures (BFS) in the nanoconfinement between the active and the support layer of a thin-film-composite polyamide (TFC-PA) nanofiltration membrane. These BFS are crystal dendrites of NaCl formed when salts are either added to the piperazine solution during the interfacial polymerization process or introduced to the nascently formed TFC-PA membrane before drying. The NaCl dosing concentration and the curing temperature have an impact on the size of the BFS but not on the fractal dimension (∼1.76). The BFS can be removed from the TFC-PA membranes by simply dissolving the crystal dendrites in deionized water, and the resulting TFC-PA membranes have substantially higher water fluxes (three- to fourfold) without compromised solute rejection. The flux enhancement is believed to be attributable to the distributed reduction in physical binding between the PA active layer and the support layer, caused by the exertion of crystallization pressure when the BFS formed. This reduced physical binding leads to an increase in the effective area for water transport, which, in turn, results in higher water flux. The BFS-templating method, which includes the interesting characteristics of 2D crystal dendrites, represents a facile, low-cost, and highly practical method of enhancing the performance of the TFC-PA nanofiltration membrane without having to alter the existing infrastructure of membrane fabrication.

Pseudo-zwitterions self-assembled from polycation and anion clusters showing exceptional water-cleanable anti-crude-oil-adhesion property.

It is of great importance and practical value to develop a facile and operable surface treatment method of materials with excellent antipollution and antiadhesion property, but still a huge challenge. In this work, a series of pseudo-zwitterions are prepared from electrostatic assembly of cationic polyethyleneimine and anionic phosphonic clusters. These pseudo-zwitterionic assemblies provide a strong hydration through electrostatic interaction with water and in turn create a barrier against oil foulants, leading to a nearly zero crude oil adhesion force. The pseudo-zwitterions-decorated surfaces exhibit exceptional water-cleanable oil-repellent property, even when they are completely dried and without prehydration before fouled by crude oil. While using these pseudo-zwitterions-modified polymeric membranes for separating surfactant stabilized oil-in-water emulsion, less than 10% decline of permeating flux is observed throughout a 2-h continuous separation experiment, showing excellent emulsion separation ability and antipollution performance for high viscous oil.

miR-196a-2 Promotes Malignant Progression of Thyroid Carcinoma by Targeting NRXN1.

Thyroid cancer (TC) is the most common endocrine malignant disease with a rising morbidity year by year. Accumulating studies have shown that microRNAs (miRNAs) play a regulatory role in the progression of various tumors, but the molecular regulatory mechanism of miR-196a-2 in TC is still unknown. qRT-PCR was employed to measure the expression of miR-196a-2 and NRXN1 mRNA in TC cells, while western blot was used to detect the protein expression of NRXN1. CCK-8, colony formation and flow cytometry assays were used to measure cell proliferation and apoptosis of TC cells. Dual-luciferase reporter gene assay was used to predict and verify the targeted binding relationship between miR-196a-2 and NRXN1. Our study results manifested that miR-196a-2 was dramatically overexpressed in cells of TC, while NRXN1 was lowly expressed. miR-196a-2 could promote cell proliferation and inhibit cell apoptosis of TC. Additionally, miR-196a-2 could also target and inhibit the expression of NRXN1. Silencing NRXN1 could reverse the inhibitory effect of miR-196a-2 downregulation on cell proliferation of TC, as well as the promoting effect on cell apoptosis. In a conclusion, we found that miR-196a-2 could promote cell proliferation and inhibit cell apoptosis of TC by targeting NRXN1. Therefore, miR-196a-2/NRXN1 is potential to be a molecular therapeutic target for TC.

miR-301b-3p Regulates Breast Cancer Cell Proliferation, Migration, and Invasion by Targeting NR3C2.

OBJECTIVES: Breast cancer is the most common malignant tumor among females, and miRNAs have been reported to play an important regulatory role in breast cancer progression. This study aimed to explore the function and underlying molecular mechanism of miR-301b-3p in breast cancer. METHODS: Differential analysis and survival analysis were performed based on the data accessed from the TCGA-BRCA dataset for identification of the target miRNA. Bioinformatics analysis was conducted to predict the downstream target gene of the miRNA. Real-time quantitative PCR was carried out to detect the expression of miR-301b-3p and nuclear receptor subfamily 3 group C member 2 (NR3C2). Western blot was used to assess the protein expression of NR3C2. Cell counting kit-8 assay was performed to evaluate the proliferation of breast cancer cells. Transwell assay was conducted to determine the migratory and invasive abilities of breast cancer cells. Dual-luciferase reporter assay was employed to verify the targeting relationship between miR-301b-3p and NR3C2. RESULTS: miR-301b-3p was elevated in breast cancer cell lines and promoted cell proliferation, migration, and invasion in terms of its biological function in breast cancer. NR3C2 was validated as a direct target of miR-301b-3p via bioinformatics analysis and dual-luciferase reporter assay, and NR3C2 was downregulated in breast cancer cell lines. The rescue experiment indicated that NR3C2 was involved in the mechanism by which miR-301b-3p regulated the malignant phenotype of breast cancer cells. CONCLUSION: The present study revealed for the first time that miR-301b-3p could foster breast cancer cell proliferation, migration, and invasion by targeting NR3C2, unveiling that miR-301b-3p is a novel carcinogen in breast cancer.

A Single-Walled Carbon Nanotube/Covalent Organic Framework Nanocomposite Ultrathin Membrane with High Organic Solvent Resistance for Molecule Separation.

Covalent organic framework (COF)-based membranes are burgeoning candidates for separation technologies owing to their well-ordered channel structures. The exponential interest in the stability of the COF membrane on exposure to harsh organic solvents is directed to develop a composite membrane for dye separations in polar aprotic solvents. Here, we reported a nanocomposite membrane composing of a single-walled carbon nanotube (SWCNT)/COF (an imine-based COF) hybrid on a commercial polytetrafluoroethylene (PTFE) substrate, with a thickness of ∼58 nm prepared in a diffusion cell. This membrane displayed high permeability and stability toward nonpolar and aprotic solvents. It exhibited high permeability for lower viscous organic solvents such as hexane (66 L m-2 h-1 bar-1), acetone (60 L m-2 h-1 bar-1), and acetonitrile (59 L m-2 h-1 bar-1) with a desirable dye rejection (92.8% for Brilliant blue in acetone). The long-time operation demonstrated the excellent stability of the nanocomposite membrane. We herein reported a facile and mild method to prepare an ultrathin COF-based nanocomposite membrane with a porous, robust structure coupled with solvent durability capable of efficient dye separation.

Superhydrophilic Sub-1-nm Porous Membrane with Electroneutral Surface for Nonselective Transport of Small Organic Molecules.

The study of traditional Chinese medicines (TCMs) is receiving increasing attention worldwide because of their contribution to human health. Developing an effective and sustainable method for screening TCMs is highly desired to accelerate the modernization of TCMs. In this work, we report a neutrally charged membrane made of a positively charged polyelectrolyte electrostatically assembled on a negatively charged superhydrophilic nanoporous membrane. The composite membrane possesses stable electroneutrality in a wide pH range and can precisely and nonselectively separate various charged molecules in TCMs with a transmittance higher than 90% for molecules with molecular weight (Mw) < 400 and a high rejection of 90% for molecules with Mw > 800. In addition, the membrane exhibits a superior antifouling performance, and the recovery ratio observed during a continuous cycling test of a simulated TCM solution was more than 93%. The combination of superhydrophilicity and electroneutrality in a nanoporous membrane provides a new route for designing nanofiltration membranes for highly efficient molecule separation and is promising for screening TCMs.

Ultrafast Ion Sieving from Honeycomb-like Polyamide Membranes Formed Using Porous Protein Assemblies.

Despite the commercial success of thin film composite polyamide membranes, further improvements to the water permeation of polyamide membranes without degradation in product water quality remain a great challenge. Herein, we report the fabrication of an interfacially polymerized polyamide nanofiltration membrane with a novel 3D honeycomb-like spatial structure, which is formed from a tobacco mosaic virus (TMV) porous protein nanosheet-coated microfiltration membrane support. TMV nanosheets with uniform pores and appropriate hydrophilicity deposited inside the support membrane pores facilitate the construction of a localized water-oil reaction interface with evenly distributed monomers and guide the formation of a defect-free polyamide layer with a spatial structure that copies the geometry of the membrane cavities. Such a 3D morphology possesses ultrahigh specific surface area, leading to unprecedented membrane water permeance as high as 84 L m-2 h-1 bar-1, high MgSO4 rejection of 98%, and monovalent/divalent ion sieving selectivity up to 89.

Polyamide nanofiltration membrane with highly uniform sub-nanometre pores for sub-1 Å precision separation.

Separating molecules or ions with sub-Angstrom scale precision is important but technically challenging. Achieving such a precise separation using membranes requires Angstrom scale pores with a high level of pore size uniformity. Herein, we demonstrate that precise solute-solute separation can be achieved using polyamide membranes formed via surfactant-assembly regulated interfacial polymerization (SARIP). The dynamic, self-assembled network of surfactants facilitates faster and more homogeneous diffusion of amine monomers across the water/hexane interface during interfacial polymerization, thereby forming a polyamide active layer with more uniform sub-nanometre pores compared to those formed via conventional interfacial polymerization. The polyamide membrane formed by SARIP exhibits highly size-dependent sieving of solutes, yielding a step-wise transition from low rejection to near-perfect rejection over a solute size range smaller than half Angstrom. SARIP represents an approach for the scalable fabrication of ultra-selective membranes with uniform nanopores for precise separation of ions and small solutes.

Zwitterionic Nanohydrogels-Decorated Microporous Membrane with Ultrasensitive Salt Responsiveness for Controlled Water Transport.

Highly sensitive responsiveness is vital for stimuli-responsive membranes. However, it is a great challenge to fabricate stimuli-responsive membranes with ultrahigh gating ratio (the ratio of the salt solution permeating flux to the pure water permeating flux) and high response speed simultaneously. In this work, a salt-responsive membrane with an ultrahigh gating ratio is fabricated via a facile strategy by grafting zwitterionic nanohydrogels onto a poly(acrylic acid)-grafting-poly(vinylidene fluoride) (PAA-g-PVDF) microporous membrane. Due to the synergistic effect of two functional materials, PAA chains and zwitterionic nanohydrogels tethered on PAA chains, this stimuli-responsive membrane exhibits an ultrasensitive salt responsiveness with a gating ratio of up to 8.76 times for Na+ ions, 89.6 times for Mg2+ ions, and 89.3 times for Ca2+ ions. In addition, such zwitterionic nanohydrogels-grafted PAA-g-PVDF (ZNG-g-PVDF) membranes exhibit very rapid responses to stimuli. The permeating flux changes swiftly while altering the feed solution in a continuous filtration process. The excellent salt-responsive characteristics endow such a ZNG-g-PVDF membrane with great potential for applications like drug delivery, water treatment, and sensors.

Ultrathin Polyamide Nanofiltration Membrane Fabricated on Brush-Painted Single-Walled Carbon Nanotube Network Support for Ion Sieving.

Recently, ultrathin polyamide nanofiltration membranes fabricated on nanomaterial-based supports have overcome the limitations of conventional supports and show greatly improved separation performance. However, the feasibility of the nanomaterial-based supports for large-scale fabrication of the ultrathin polyamide membrane is still unclear. Herein, we report a controllable and saleable fabrication technique for a single-walled carbon nanotube (SWCNT) network support via brush painting. The mechanical and chemical stability of the SWCNT network support were carefully examined, and an ultrathin polyamide membrane with thickness of ∼15 nm was successfully fabricated based on such a support. The obtained thin-film composite (TFC) polyamide nanofiltration membranes exhibited extremely high water permeability of ∼40 L m-2 h -1 bar-1, a high Na2SO 4 rejection of 96.5%, and high monovalent/divalent ion permeation selectivity and maintained highly efficient ion sieving throughout 48 h of testing. This work demonstrates a practical route toward the controllable large-scale fabrication of the TFC membrane with an SWCNT network support for ion and molecule sieving. This work is also expected to boost the mass production and practical applications of state-of-the-art membranes composed of one-dimensional and two-dimensional nanomaterials as well as the nanomaterial-supported TFC membranes.