First-row transition metal carbonates catalyze the electrochemical oxygen evolution reaction: iron is master of them all.

In pursuing green hydrogen fuel, electrochemical water-splitting emerges as the optimal method. A critical challenge in advancing this process is identifying a cost-effective electrocatalyst for oxygen evolution on the anode. Recent research has demonstrated the efficacy of first-row transition metal carbonates as catalysts for various oxidation reactions. In this study, Earth-abundant first-row transition metal carbonates were electrodeposited onto nickel foam (NF) electrodes and evaluated for their performance in the oxygen evolution reaction. The investigation compares the activity of these carbonates on NF electrodes against bare NF electrodes. Notably, Fe2(CO3)3/NF exhibited superior oxygen evolution activity, characterized by low overpotential values, i.e. Iron is master of them all (R. Kipling, Cold Iron, Rewards and Fairies, Macmillan and Co. Ltd., 1910). Comprehensive catalytic stability and durability tests also indicate that these transition metal carbonates maintain stable activity, positioning them as durable and efficient electrocatalysts for the oxygen evolution reaction.

Hydrogen adsorption on various transition metal (111) surfaces in water: a DFT forecast.

The hydrogen adsorption and hydrogen evolution at the M(111), (M = Ag, Au Cu, Pt, Pd, Ni & Co) surfaces of various transition metals in aqueous suspensions were studied computationally using the DFT methods. The hydrogens are adsorbed dissociatively on all surfaces except on Ag(111) and Au(111) surfaces. The results are validated by reported experimental and computational studies. Hydrogen atoms have large mobility on M(111) surfaces due to the small energy barriers for diffusion on the surface. The hydrogen evolution via the Tafel mechanism is considered at different surface coverage ratios of hydrogen atoms and is used as a descriptor for the hydrogen adsorption capacity on M(111) surfaces. All calculations are performed without considering how the hydrogen atoms are formed on the surface. The hydrogen adsorption energies decrease with the increase in the surface coverage of hydrogen atoms. The surface coverage for the H2 evolution depends on each M(111) surface. Among the considered M(111) surfaces, Au(111) has the least hydrogen adsorption capacity and Ni, Co and Pd have the highest. Furthermore, experiments proving that after the H2 evolution reaction (HER) on Au0-NPs, and Ag0-NPs surfaces some reducing capacity remains on the M0-NPs is presented.

The Competition between 4-Nitrophenol Reduction and BH4- Hydrolysis on Metal Nanoparticle Catalysts.

Assessing competitive environmental catalytic reduction processes via NaBH4 is essential, as BH4- is both an energy carrier (as H2) and a reducing agent. A comprehensive catalytic study of the competition between the borohydride hydrolysis reaction (BHR, releasing H2) and 4-nitrophenol reduction via BH4- on M0- and M/M' (alloy)-nanoparticle catalysts is reported. The results reveal an inverse correlation between the catalytic efficiency for BH4- hydrolysis and 4-nitrophenol reduction, indicating that catalysts performing well in one process exhibit lower activity in the other. Plausible catalytic mechanisms are discussed, focusing on the impact of reaction products such as 4-aminophenol and borate on the rate and yield of BH4- hydrolysis. The investigated catalysts were Ag0, Au0, Pt0, and Ag/Pt-alloy nanoparticles synthesized without any added stabilizer. Notably, the observed rate constants for the 4-nitrophenol reduction on Ag0, Ag-Pt (9:1), and Au0 are significantly higher than the corresponding rate constants for BH4- hydrolysis, suggesting that most reductions do not proceed through surface-adsorbed hydrogen atoms, as observed for Pt0 nanoparticles. This research emphasizes the conflicting nature of BH4- hydrolysis and reduction processes, provides insights for designing improved catalysts for competitive reactions, and sheds light on the catalyst properties required for each specific process.

Chemically Etched Prussian Blue Analog-WS2 Composite as a Precatalyst for Enhanced Electrocatalytic Water Oxidation in Alkaline Media.

The electrochemical water-splitting reaction is a promising source of ecofriendly hydrogen fuel. However, the oxygen evolution reaction (OER) at the anode impedes the overall process due to its four-electron oxidation steps. To address this issue, we developed a highly efficient and cost-effective electrocatalyst by transforming Co-Fe Prussian blue analog nanocubes into hollow nanocages using dimethylformamide as a mild etchant and then anchoring tungsten disulfide (WS2) nanoflowers onto the cages to boost OER efficiency. The resulting hybrid catalyst-derived oxide demonstrated a low overpotential of 290 mV at a current density of 10 mA cm-2 with a Tafel slope of 75 mV dec-1 in 1.0 M KOH and a high faradaic efficiency of 89.4%. These results were achieved through the abundant electrocatalytically active sites, enhanced surface permeability, and high electronic conductivity provided by WS2 nanoflowers and the porous three-dimensional (3D) architecture of the nanocages. Our research work uniquely combines surface etching of Co-Fe PBA with WS2 growth to create a promising OER electrocatalyst. This study provides a potential solution to the challenge of the OER in electrochemical water-splitting, contributing to UN SDG 7: Affordable and clean energy.

Enhancing the catalytic OER performance of MoS2via Fe and Co doping.

Enhancing the sluggish kinetics of the electrochemical oxygen evolution reaction (OER) is crucial for many clean-energy production technologies. Although much progress has been made in recent years, developing active, stable, and cost-effective OER electrocatalysts is still challenging. The layered MoS2, based on Earth-abundant elements, is widely explored as a promising hydrogen evolution electrocatalyst but exhibits poor OER activity. Here, we report a facile strategy to improve the sluggish OER of MoS2 through co-doping MoS2 nanosheets with Fe and Co atoms. The synergistic effect obtained by adjusting the Co/Fe ratio in the Fe-Co doped MoS2 induces electronic and structural modifications and a richer active surface area morphology resulting in a relatively low OER overpotential of 380 mV (at 10 mA cm-2). The electronic modulation upon doping was further supported by DFT calculations that show favorable interaction with the OER intermediate species, thus reducing the energy barrier for the OER. This work paves the way for future strategies for tailoring the electronic properties of transition-metal dichalcogenides (TMDCs) to activate the structure for the sluggish OER with the assistance of non-noble-metal materials.

DFT Study of the BH4 - Hydrolysis on Au(111) Surface.

The mechanism of the catalytic hydrolysis of BH4 - on Au(111) as studied by DFT is reported. The results are compared to the analogous process on Ag(111) that was recently reported. It is found that the borohydride species are adsorbed stronger on the Au0 -NP surface than on the Ag0 -NP surface. The electron affinity of the Au is larger than that of Ag. The results indicate that only two steps of hydrolysis are happening on the Au(111) surface and the reaction mechanism differs significantly from that on the Ag(111) surface. These remarkable results were experimentally verified. Upon hydrolysis, only three hydrogens of BH4 - are transferred to the Au surface, not all four, and H2 generation is enhanced in the presence of surface H atoms. Thus, it is proposed that the BH4 - hydrolysis and reduction mechanisms catalyzed by M0 -NPs depend considerably on the nature of the metal.

The Role of Common Alcoholic Sacrificial Agents in Photocatalysis: Is It Always Trivial?

Photocatalytic hydrogen production is proposed as a sustainable energy source. Simultaneous reduction and oxidation of water is a complex multistep reaction with high overpotential. Photocatalytic processes involving semiconductors transfer electrons from the valence band to the conduction band. Sacrificial substrates that react with the photochemically formed holes in the valence band are often used to study the mechanism of H2 production, as they scavenge the holes and hinder charge carrier recombination (electron-hole pairs). Here, we show that the desired sacrificial agent is one forming a radical that is a fairly strong reducing agent, and whose oxidized form is not a good electron acceptor that might suppress the hydrogen evolution reaction (HER). In an acidic medium, methanol was found to fulfill both these requirements better than ethanol and propan-2-ol in the TiO2 -(M0 -NPs) (M=Au or Pt) system, whereas in an alkaline medium, the alcohols exhibit a reverse order of activity. Moreover, we report that CH2 (OH)2 is by far the most efficient sacrificial agent in a nontrivial mechanism in acidic media. Our study provides general guidelines for choosing an appropriate sacrificial substrate and helps to explain the variance in the performance of alcohol scavenger-based photocatalytic systems.

NO X and SO X Flue Gas Treatment System Based on Sulfur-Enriched Organic Oil in Water Emulsion.

Nitrogen (NO X ) and sulfur (SO X ) oxides, the major gaseous pollutants emitted from fossil fuel combustion, have significant health and environmental concerns. Environmental regulations limit these pollutant emissions to tolerable levels. Currently, these pollutants are treated by flue gas desulfurization (SO X removal) and selective catalytic reduction (NO X removal) processes. However, these technologies require large footprints, use expensive catalysts, and operate under high working temperatures. A new catalyst is reported herein, based on sulfur-enriched oil emulsified with water, where the active catalytic species are sulfur-based oxides. The catalyst has been developed using O2 as the oxidation reagent in a low-temperature wet scrubber rather than H2O2 or O3 that are presently used. The catalytically oxidized pollutants are converted to produce ammonium fertilizers by NH4OH addition. As a result of treatment with this novel catalyst, we observed reductions in emissions of SO X and NO X of >85% and 23%, respectively. The catalyst production and the wet scrubbing process are discussed in detail.

Redox Properties of CeIVDOTA in Carbonated Aqueous Solutions. A Radiolytic and an Electrochemical Study.

The redox chemistry of CeIIIDOTA in cage in carbonate solutions was studied using electrochemistry and radiolysis techniques (continuous radiolysis and pulse radiolysis). Spectroscopic measurements point out that the species present in the solutions at high bicarbonate concentrations are [CeIIIDOTA(CO3)]3- (or less plausible [CeIIIDOTA(HCO3)]2-) with the carbonate (bicarbonate) anion as the ninth ligand versus [CeIIIDOTA(H2O)]- present in the absence of bicarbonate. Electrochemical results show a relatively low increase in the thermodynamic stabilization of the redox couple CeIV/III in the presence of carbonate versus its aqueous analogue. [CeIVDOTA(CO3)]2- and [CeIVDOTA(H2O)], prepared electrochemically, decompose photolytically. However, kept in the dark, both are relatively long lived; [CeIVDOTA(H2O)], though, is orders of magnitude kinetically more stable (a considerably longer half-life). Thus, one concludes that the carbonate species have a different mechanism of decomposition depending also on the presence of dioxygen after its preparation (in deaerated/aerated solutions). The [CeIVDOTA(CO3)]2- species is produced radiolytically by oxidation of the trivalent species by CO3•- with a rate constant, measured using pulse radiolysis, of 3.3 × 105 M-1 s-1. This rate constant is at least 1 order of magnitude smaller than most of the rate constants so far reported for the reaction of CO3•- with transition metal/lanthanide (cerium)/actinide complexes. This result together with the bulkiness of the reactants might suggest an outer-sphere electron transfer rather than the inner-sphere one so far proposed. The lifetime of the tetravalent cerium species obtained radiolytically in the presence of carbonate is shorter than the electrochemical one, suggesting a different conformer involved.

On the Differences in the Mechanisms of Reduction of AuCl2- and Ag(H2O)2+ with BH4.

The mechanism of reduction of AuCl4-/AuCl3OH- by BH4- was analyzed by density functional theory (DFT). The results point out that Auatoms0 are not intermediates in the process. The derived mechanism differs considerably from that reported for the analogous process involving the reduction of Ag(H2O)2+ by BH4-. Thus, though both processes follow the Creighton procedure, the detailed mechanism differs significantly. For Au, the agglomeration starts with AuH2-, whereas for Ag, it starts with (H2O)AgH. Stopped-flow measurements support the complicated mechanism.

New insights into HER catalysis: the effect of nano-silica support on catalysis by silver nanoparticles.

Supported metal catalysts have recently attracted considerable attention in the field of catalysis. The effect of surface chemical groups (SiO-/SiOH2+) on SiO2-Ag0-NPs along with the average negative charge induced by (CH3)2COH˙ radicals on the catalytic reduction of H2O/H3O+ towards the hydrogen evolution reaction (HER) is reported. The results indicate that similar effects are observed both above and below the point of zero charge (PZC) of silica. More importantly, it is shown that a high concentration of this catalyst does not necessarily contribute to boosting the hydrogen formation, but instead, the density of charge on its surface is a decisive factor. A mechanistic explanation of the observed effect is given.

On the mechanism of reduction of M(H2O)mn+ by borohydride: the case of Ag(H2O)2.

The redox potentials of M(H2O)mn+/M0(atom) couples are often far too negative to enable the formation of M0(atom) by most reducing agents. Therefore, one has to reconsider the mechanism of formation of M0-NPs by the bottom-up procedure. A deep and detailed theoretical analysis of the reduction of Ag(H2O)2+ by BH4- points out that silver cations act mainly as catalysts of the reactions BH4- + 4H2O → B(OH)4- + 4H2. However, the transition states of the catalyzed process differ from those of the un-catalyzed process. The formation of (H2O)Ag-H, which is the starting stage for the formation of intermediates with Ag-Ag bonds, is only a side reaction in the process. Experimental evidence of the complexity of the process is presented, by stopped-flow; at least four processes are observed prior to the formation of Ag0-NPs. The spectra of these intermediates differ from those of Ag0atom and Ag2+aq. Though DFT calculations were performed only for silver cations, it is believed that analogous mechanisms are involved in the reductions of other cations.

The Chemical Properties of Hydrogen Atoms Adsorbed on M0 -Nanoparticles Suspended in Aqueous Solutions: The Case of Ag0 -NPs and Au0 -NPs Reduced by BD4.

The nature of H-atoms adsorbed on M0 -nanoparticles is of major importance in many catalyzed reduction processes. Using isotope labeling, we determined that hydrogen evolution from transient {(M0 -NP)-Hn }n- proceeds mainly via the Heyrovsky mechanism when n is large (i.e., the hydrogens behave as hydrides) but mainly via the Tafel mechanism when n is small (i.e., the hydrogens behave as atoms). Additionally, the relative contributions of the two mechanisms differ considerably for M=Au and Ag. The results are analogous to those recently reported for the M0 -NP-catalyzed de-halogenation processes.

Water oxidation catalyzed by cobalt(II) adsorbed on silica nanoparticles.

A novel, highly efficient, and stable water oxidation catalyst was prepared by a pH-controlled adsorption of Co(II) on ~10 nm diameter silica nanoparticles. A lower limit of ~300 s(-1) per cobalt atom for the catalyst turnover frequency in oxygen evolution was estimated, which attests to a very high catalytic activity. Electron microscopy revealed that cobalt is adsorbed on the SiO(2) nanoparticle surfaces as small (1-2 nm) clusters of Co(OH)(2). This catalyst is optically transparent over the entire UV-vis range and is thus suitable for mechanistic investigations by time-resolved spectroscopic techniques.

On the lifetime of the transients (NP)-(CH3)n (NP = Ag0, Au0, TiO2 nanoparticles) formed in the reactions between methyl radicals and nanoparticles suspended in aqueous solutions.

Methyl radicals react in fast reactions, with rate constants k>1×10(8) M(-1) s(-1), with Au(0), Ag(0) and TiO(2) nanoparticles (NPs) dispersed in aqueous solutions to form intermediates, (NP)-(CH(3))(n), in which the methyl groups are covalently bound to the NPs. These intermediates decompose to form ethane. As n≥2 is required for the formation of C(2)H(6), the minimal lifetime (τ) of the methyls bound to the NPs, (NP)-CH(3), can be estimated from the rate of production of the CH(3)(·) radicals and the NPs concentration. The results obtained in this study, using a very low dose rate γ-source for NP = Ag(0), Au(0), and TiO(2) point out that τ of these intermediates is surprisingly long, for example, ≥8 and ≥188 sec for silver and gold, respectively. These data point out that the NP-C bond dissociation energies are ≥70 kJ mol(-1). Under low rates of production of CH(3)(·), that is, when the rate of formation of ethane is very low, other reactions may occur, consequently the mechanism proposed is "broken". This is observed in the present study only for TiO(2) NPs. These results have to be considered whenever alkyl radicals are formed near surfaces. Furthermore, the results point out that the rate of reaction of methyl radicals with (NP)-(CH(3))(n) depends on n, that is, the number of methyl radicals bound to the NPs affect the properties of the NPs.

Photochemical induced growth and aggregation of metal nanoparticles in diode-array spectrophotometer via excited dimethyl-sulfoxide.

Ag(0) and Au(0) nanoparticles suspended in dilute aqueous solutions containing (CH(3))(2)SO are photochemically unstable. The light source of a diode-array spectrophotometer induces, within less than a minute, particle growth and aggregation. The results indicate that this process is triggered by UV light absorption by the (CH(3))(2)SO.

Reactions of alkyl-radicals with gold and silver nanoparticles in aqueous solutions.

Silver and gold nanoparticles are very efficient catalysts for the dimerization of methyl-radicals in aqueous solutions. The rate constants for the reaction of methyl-radicals with the gold and silver nanoparticles were measured and found to be 3.7 x 10(8) M(-1) s(-1) and 1.4 x 10(9) M(-1) s(-1), respectively. The results thus suggest that alkyl-radicals, also not reducing ones, are scavenged by these nanoparticles. This might explain the role, if such a role exists, of these nanoparticles in medical applications.