RESUMEN
Quantum key distribution (QKD) enables the transmission of information that is secure against general attacks by eavesdroppers. The use of on-demand quantum light sources in QKD protocols is expected to help improve security and maximum tolerable loss. Semiconductor quantum dots (QDs) are a promising building block for quantum communication applications because of the deterministic emission of single photons with high brightness and low multiphoton contribution. Here we report on the first intercity QKD experiment using a bright deterministic single photon source. A BB84 protocol based on polarisation encoding is realised using the high-rate single photons in the telecommunication C-band emitted from a semiconductor QD embedded in a circular Bragg grating structure. Utilising the 79 km long link with 25.49 dB loss (equivalent to 130 km for the direct-connected optical fibre) between the German cities of Hannover and Braunschweig, a record-high secret key bits per pulse of 4.8 × 10-5 with an average quantum bit error ratio of ~ 0.65% are demonstrated. An asymptotic maximum tolerable loss of 28.11 dB is found, corresponding to a length of 144 km of standard telecommunication fibre. Deterministic semiconductor sources therefore challenge state-of-the-art QKD protocols and have the potential to excel in measurement device independent protocols and quantum repeater applications.
RESUMEN
Strain-free GaAs/AlGaAs semiconductor quantum dots (QDs) grown by droplet etching and nanohole infilling (DENI) are highly promising candidates for the on-demand generation of indistinguishable and entangled photon sources. The spectroscopic fingerprint and quantum optical properties of QDs are significantly influenced by their morphology. The effects of nanohole geometry and infilled material on the exciton binding energies and fine structure splitting are well-understood. However, a comprehensive understanding of GaAs/AlGaAs QD morphology remains elusive. To address this, we employ high-resolution scanning transmission electron microscopy (STEM) and reverse engineering through selective chemical etching and atomic force microscopy (AFM). Cross-sectional STEM of uncapped QDs reveals an inverted conical nanohole with Al-rich sidewalls and defect-free interfaces. Subsequent selective chemical etching and AFM measurements further reveal asymmetries in element distribution. This study enhances the understanding of DENI QD morphology and provides a fundamental three-dimensional structural model for simulating and optimizing their optoelectronic properties.
RESUMEN
Efficient generation of entangled photon pairs at telecom wavelengths is a key ingredient for long-range quantum networks. While embedding semiconductor quantum dots into hybrid circular Bragg gratings has proven effective, it conflicts with p-i-n diode heterostructures which offer superior coherence. We propose and analyze hybrid circular photonic crystal gratings, incorporating air holes to facilitate charge carrier transport without compromising optical properties. Through numerical simulations, a broad cavity mode with a Purcell factor of 23 enhancing both exciton and biexciton transitions, and exceptional collection efficiency of 92.4% into an objective with numerical aperture of 0.7 are achieved. Furthermore, our design demonstrates direct coupling efficiency over 90.5% into a single-mode fiber over the entire telecom C-band. The hybrid circular photonic crystal grating thereby emerges as a promising solution for the efficient generation of highly coherent, polarization-entangled photon pairs.
RESUMEN
Large-scale quantum networks require the implementation of long-lived quantum memories as stationary nodes interacting with qubits of light. Epitaxially grown quantum dots hold great potential for the on-demand generation of single and entangled photons with high purity and indistinguishability. Coupling these emitters to memories with long coherence times enables the development of hybrid nanophotonic devices that incorporate the advantages of both systems. Here we report the first GaAs/AlGaAs quantum dots grown by the droplet etching and nanohole infilling method, emitting single photons with a narrow wavelength distribution (736.2 ± 1.7 nm) close to the zero-phonon line of silicon-vacancy centers. Polarization entangled photons are generated via the biexciton-exciton cascade with a fidelity of (0.73 ± 0.09). High single photon purity is maintained from 4 K (g(2)(0) = 0.07 ± 0.02) up to 80 K (g(2)(0) = 0.11 ± 0.01), therefore making this hybrid system technologically attractive for real-world quantum photonic applications.
RESUMEN
Long-distance fiber-based quantum communication relies on efficient non-classical light sources operating at telecommunication wavelengths. Semiconductor quantum dots are promising candidates for on-demand generation of single photons and entangled photon pairs for such applications. However, their brightness is strongly limited due to total internal reflection at the semiconductor/vacuum interface. Here we overcome this limitation using a dielectric antenna structure. The non-classical light source consists of a gallium phosphide solid immersion lens in combination with a quantum dot nanomembrane emitting single photons in the telecom O-band. With this device, the photon extraction is strongly increased in a broad spectral range. A brightness of 17% (numerical aperture of 0.6) is obtained experimentally, with a single photon purity of g(2)(0)=0.049±0.02 at saturation power. This brings the practical implementation of quantum communication networks one step closer.
RESUMEN
Transferring entangled states between photon pairs is essential in quantum communication. Semiconductor quantum dots are the leading candidate for generating polarization-entangled photons deterministically. Here we show for the first time swapping of entangled states between two pairs of photons emitted by a single dot. A joint Bell measurement heralds the successful generation of the Bell state Ψ^{+}, yielding a fidelity of 0.81±0.04 and violating the CHSH and Bell inequalities. Our photon source matches atomic quantum memory frequencies, facilitating implementation of hybrid quantum repeaters.
RESUMEN
Many quantum photonic technologies require the efficient generation of entangled pairs of photons, but to date there have been few ways to produce them reliably. Sources based on parametric down conversion operate at very low efficiency per pulse due to the probabilistic generation process. Semiconductor quantum dots can emit single pairs of entangled photons deterministically but they fall short due to the extremely low-extraction efficiency. Strategies for extracting single photons from quantum dots, such as embedding them in narrowband optical cavities, are difficult to translate to entangled photons. Here, we build a broadband optical antenna with an extraction efficiency of 65% ± 4% and demonstrate a highly-efficient entangled-photon source by collecting strongly entangled photons (fidelity of 0.9) at a pair efficiency of 0.372 ± 0.002 per pulse. The high brightness achieved by our source represents a step forward in the development of optical quantum technologies.
RESUMEN
Coercive fields of piezoelectric materials can be strongly influenced by environmental temperature. We investigate this influence using a heterostructure consisting of a single crystal piezoelectric film and a quantum dots containing membrane. Applying electric field leads to a physical deformation of the piezoelectric film, thereby inducing strain in the quantum dots and thus modifying their optical properties. The wavelength of the quantum dot emission shows butterfly-like loops, from which the coercive fields are directly derived. The results suggest that coercive fields at cryogenic temperatures are strongly increased, yielding values several tens of times larger than those at room temperature. We adapt a theoretical model to fit the measured data with very high agreement. Our work provides an efficient framework for predicting the properties of ferroelectric materials and advocating their practical applications, especially at low temperatures.
RESUMEN
Semiconductor InAs/GaAs quantum dots grown by the Stranski-Krastanov method are among the leading candidates for the deterministic generation of polarization-entangled photon pairs. Despite remarkable progress in the past 20 years, many challenges still remain for this material, such as the extremely low yield, the low degree of entanglement and the large wavelength distribution. Here, we show that with an emerging family of GaAs/AlGaAs quantum dots grown by droplet etching and nanohole infilling, it is possible to obtain a large ensemble of polarization-entangled photon emitters on a wafer without any post-growth tuning. Under pulsed resonant two-photon excitation, all measured quantum dots emit single pairs of entangled photons with ultra-high purity, high degree of entanglement and ultra-narrow wavelength distribution at rubidium transitions. Therefore, this material system is an attractive candidate for the realization of a solid-state quantum repeater-among many other key enabling quantum photonic elements.
RESUMEN
We explore a method to achieve electrical control over the energy of on-demand entangled-photon emission from self-assembled quantum dots (QDs). The device used in our work consists of an electrically tunable diode-like membrane integrated onto a piezoactuator, which is capable of exerting a uniaxial stress on QDs. We theoretically reveal that, through application of the quantum-confined Stark effect to QDs by a vertical electric field, the critical uniaxial stress used to eliminate the fine structure splitting of QDs can be linearly tuned. This feature allows experimental realization of a triggered source of energy-tunable entangled-photon emission. Our demonstration represents an important step toward realization of a solid-state quantum repeater using indistinguishable entangled photons in Bell state measurements.
RESUMEN
Many of the quantum information applications rely on indistinguishable sources of polarization-entangled photons. Semiconductor quantum dots are among the leading candidates for a deterministic entangled photon source; however, due to their random growth nature, it is impossible to find different quantum dots emitting entangled photons with identical wavelengths. The wavelength tunability has therefore become a fundamental requirement for a number of envisioned applications, for example, nesting different dots via the entanglement swapping and interfacing dots with cavities/atoms. Here we report the generation of wavelength-tunable entangled photons from on-chip integrated InAs/GaAs quantum dots. With a novel anisotropic strain engineering technique based on PMN-PT/silicon micro-electromechanical system, we can recover the quantum dot electronic symmetry at different exciton emission wavelengths. Together with a footprint of several hundred microns, our device facilitates the scalable integration of indistinguishable entangled photon sources on-chip, and therefore removes a major stumbling block to the quantum-dot-based solid-state quantum information platforms.
RESUMEN
We demonstrate for the first time on-demand and wavelength-tunable single-photon emission from light-hole (LH) excitons in strain engineered GaAs quantum dots (QDs). The LH photon emission from tensile-strained GaAs QDs is systematically investigated with polarization-resolved, power-dependent photoluminescence spectroscopy, and photon-correlation measurements. By integrating QD-containing nanomembranes onto a piezo-actuator and driving single QDs with picosecond laser pulses, we achieve triggered and wavelength-tunable LH single-photon emission. Fourier transform spectroscopy is also performed, from which the coherence time of the LH single-photon emission is studied. We envision that this new type of LH exciton-based single-photon source (SPS) can be applied to realize an all-semiconductor based quantum interface in distributed quantum networks [Phys. Rev. Lett. 2008, 100, 096602].