Solvent Controlled Generation of Spin Active Polarons in Two-Dimensional Material under UV Light Irradiation.

Polarons belong to a class of extensively studied quasiparticles that have found applications spanning diverse fields, including charge transport, colossal magnetoresistance, thermoelectricity, (multi)ferroism, optoelectronics, and photovoltaics. It is notable, though, that their interaction with the local environment has been overlooked so far. We report an unexpected phenomenon of the solvent-induced generation of polaronic spin active states in a two-dimensional (2D) material fluorographene under UV light. Furthermore, we present compelling evidence of the solvent-specific nature of this phenomenon. The generation of spin-active states is robust in acetone, moderate in benzene, and absent in cyclohexane. Continuous wave X-band electron paramagnetic resonance (EPR) spectroscopy experiments revealed a massive increase in the EPR signal for fluorographene dispersed in acetone under UV-light irradiation, while the system did not show any significant signal under dark conditions and without the solvent. The patterns appeared due to the generation of transient magnetic photoexcited states of polaronic character, which encompassed the net 1/2 spin moment detectable by EPR. Advanced ab initio calculations disclosed that polarons are plausibly formed at radical sites in fluorographene which interact strongly with acetone molecules in their vicinity. Additionally, we present a comprehensive scenario for multiplication of polaronic spin active species, highlighting the pivotal role of the photoinduced charge transfer from the solvent to the electrophilic radical centers in fluorographene. We believe that the solvent-tunable polaron formation with the use of UV light and an easily accessible 2D nanomaterial opens up a wide range of future applications, ranging from molecular sensing to magneto-optical devices.

Dinuclear copper(II) complexes with a bridging bis(chalcone) ligand reveal considerable in vitro cytotoxicity on human cancer cells and enhanced selectivity.

A bis(chalcone) molecule (H2L) was synthesized via Aldol's condensation from terephthalaldehyde and 2'-hydroxyacetophenone and it was used as bridging ligand for the preparation of five dinuclear copper(II) complexes of the composition [Cu(NN)(µ-L)Cu(NN)](NO3)2⋅nH2O (n = 0-2) (1-5), where NN stands for a bidentate N-donor ligand such as phen (1,10-phenanthroline, 1), bpy (2,2'-bipyridine, 2), mebpy (5,5'-dimethyl-2,2'-dipyridine, 3), bphen (bathophenanthroline, 4) and nphen (5-nitro-1,10-phenanthroline, 5). The compounds were characterized by different suitable techniques to confirm their purity, composition, and structure. Moreover, the products were evaluated for their in vitro cytotoxicity on a panel of human cancer cell lines: ovarian (A2780), ovarian resistant to cisplatin (A2780R), prostate (PC3), osteosarcoma (HOS), breast (MCF7) and lung (A549), and normal fibroblasts (MRC-5), showing significant cytotoxicity in most cases, with IC50 ≈ 0.35-7.8 µM. Additionally, the time-dependent cytotoxicity and cellular uptake of copper, together with flow cytometric studies concerning cell-cycle arrest, induction of cell death and autophagy and induction of intracellular ROS/superoxide production in A2780 cells, were also performed. The results of biological testing on A2780 cells pointed out a possible mechanism of action characterized by the G2/M cell cycle arrest and induction of apoptosis by triggering the intrinsic signalling pathway associated with the damage of mitochondrial structure and depletion of mitochondrial membrane potential. SYNOPSIS: Dinuclear Cu(II) complexes bearing a bridging bis(chalcone) ligand revealed high in vitro cytotoxicity, initiated A2780 cell arrest at G2/M phase and efficiently triggered intrinsic pathway of apoptosis.

Linear-Structure Single-Atom Gold(I) Catalyst for Dehydrogenative Coupling of Organosilanes with Alcohols.

A strategy for the synthesis of a gold-based single-atom catalyst (SAC) via a one-step room temperature reduction of Au(III) salt and stabilization of Au(I) ions on nitrile-functionalized graphene (cyanographene; G-CN) is described. The graphene-supported G(CN)-Au catalyst exhibits a unique linear structure of the Au(I) active sites promoting a multistep mode of action in dehydrogenative coupling of organosilanes with alcohols under mild reaction conditions as proven by advanced XPS, XAFS, XANES, and EPR techniques along with DFT calculations. The linear structure being perfectly accessible toward the reactant molecules and the cyanographene-induced charge transfer resulting in the exclusive Au(I) valence state contribute to the superior efficiency of the emerging two-dimensional SAC. The developed G(CN)-Au SAC, despite its low metal loading (ca. 0.6 wt %), appear to be the most efficient catalyst for Si-H bond activation with a turnover frequency of up to 139,494 h-1 and high selectivities, significantly overcoming all reported homogeneous gold catalysts. Moreover, it can be easily prepared in a multigram batch scale, is recyclable, and works well toward more than 40 organosilanes. This work opens the door for applications of SACs with a linear structure of the active site for advanced catalytic applications.

Metastable Ni(I)-TiO2-x Photocatalysts: Self-Amplifying H2 Evolution from Plain Water without Noble Metal Co-Catalyst and Sacrificial Agent.

Decoration of semiconductor photocatalysts with cocatalysts is generally done by a step-by-step assembly process. Here, we describe the self-assembling and self-activating nature of a photocatalytic system that forms under illumination of reduced anatase TiO2 nanoparticles in an aqueous Ni2+ solution. UV illumination creates in situ a Ni+/TiO2/Ti3+ photocatalyst that self-activates and, over time, produces H2 at a higher rate. In situ X-ray absorption spectroscopy and electron paramagnetic resonance spectroscopy show that key to self-assembly and self-activation is the light-induced formation of defects in the semiconductor, which enables the formation of monovalent nickel (Ni+) surface states. Metallic nickel states, i.e., Ni0, do not form under the dark (resting state) or under illumination (active state). Once the catalyst is assembled, the Ni+ surface states act as electron relay for electron transfer to form H2 from water, in the absence of sacrificial species or noble metal cocatalysts.

Observation of magnetic vortex configuration in non-stoichiometric Fe3O4 nanospheres.

Theoretical and micromagnetic simulation studies of magnetic nanospheres with vortex configurations suggest that such nanostructured materials have technological advantages over conventional nanosystems for applications based on high-power-rate absorption and subsequent emission. However, full experimental evidence of magnetic vortex configurations in spheres of submicrometer size is still lacking. Here, we report the microwave irradiation fabrication of Fe3O4 nanospheres and establish their magnetic vortex configuration based on experimental results, theoretical analysis, and micromagnetic simulations. Detailed magnetic and electrical measurements, together with Mössbauer spectroscopy data, provide evidence of a loss of stoichiometry in vortex nanospheres owing to the presence of a surface oxide layer, defects, and a higher concentration of cation vacancies. The results indicate that the magnetic vortex spin configuration can be established in bulk spherical magnetite materials. This study provides crucial information that can aid the synthesis of magnetic nanospheres with magnetically tailored properties; consequently, they may be promising candidates for future technological applications based on three-dimensional magnetic vortex structures.

Magnetic Polaron States in Photoluminescent Carbon Dots Enable Hydrogen Peroxide Photoproduction.

Photoactivation of aspartic acid-based carbon dots (Asp-CDs) induces the generation of spin-separated species, including electron/hole (e- /h+ ) polarons and spin-coupled triplet states, as uniquely confirmed by the light-induced electron paramagnetic resonance spectroscopy. The relative population of the e- /h+ pairs and triplet species depends on the solvent polarity, featuring a substantial stabilization of the triplet state in a non-polar environment (benzene). The electronic properties of the photoexcited Asp-CDs emerge from their spatial organization being interpreted as multi-layer assemblies containing a hydrophobic carbonaceous core and a hydrophilic oxygen and nitrogen functionalized surface. The system properties are dissected theoretically by density functional theory in combination with molecular dynamics simulations on quasi-spherical assemblies of size-variant flakelike model systems, revealing the importance of size dependence and interlayer effects. The formation of the spin-separated states in Asp-CDs enables the photoproduction of hydrogen peroxide (H2 O2 ) from water and water/2-propanol mixture via a water oxidation reaction.

Intermetallic Copper-Based Electride Catalyst with High Activity for C-H Oxidation and Cycloaddition of CO2 into Epoxides.

Inorganic electrides have been proved to be efficient hosts for incorporating transition metals, which can effectively act as active sites giving an outstanding catalytic performance. Here, it is demonstrated that a reusable and recyclable (for more than 7 times) copper-based intermetallic electride catalyst (LaCu0.67 Si1.33 ), in which the Cu sites activated by anionic electrons with low-work function are uniformly dispersed in the lattice framework, shows vast potential for the selective C-H oxidation of industrially important hydrocarbons and cycloaddition of CO2 with epoxide. This leads to the production of value-added cyclic carbonates under mild reaction conditions. Importantly, the LaCu0.67 Si1.33 catalyst enables much higher turnover frequencies for the C-H oxidation (up to 25 276 h-1 ) and cycloaddition of CO2 into epoxide (up to 800 000 h-1 ), thus exceeding most nonnoble as well as noble metal catalysts. Density functional theory investigations have revealed that the LaCu0.67 Si1.33 catalyst is involved in the conversion of N-hydroxyphthalimide (NHPI) into the phthalimido-N-oxyl (PINO), which then triggers selective abstraction of an H atom from ethylbenzene for the generation of a radical susceptible to further oxygenation in the presence of O2 .

Evidence of Au(II) and Au(0) States in Bovine Serum Albumin-Au Nanoclusters Revealed by CW-EPR/LEPR and Peculiarities in HR-TEM/STEM Imaging.

Bovine serum albumin-embedded Au nanoclusters (BSA-AuNCs) are thoroughly probed by continuous wave electron paramagnetic resonance (CW-EPR), light-induced EPR (LEPR), and sequences of microscopic investigations performed via high-resolution transmission electron microscopy (HR-TEM), scanning transmission electron microscopy (STEM), and energy dispersive X-ray analysis (EDS). To the best of our knowledge, this is the first report analyzing the BSA-AuNCs by CW-EPR/LEPR technique. Besides the presence of Au(0) and Au(I) oxidation states in BSA-AuNCs, the authors observe a significant amount of Au(II), which may result from a disproportionation event occurring within NCs: 2Au(I) → Au(II) + Au(0). Based on the LEPR experiments, and by comparing the behavior of BSA versus BSA-AuNCs under UV light irradiation (at 325 nm) during light off-on-off cycles, any energy and/or charge transfer event occurring between BSA and AuNCs during photoexcitation can be excluded. According to CW-EPR results, the Au nano assemblies within BSA-AuNCs are estimated to contain 6-8 Au units per fluorescent cluster. Direct observation of BSA-AuNCs by STEM and HR-TEM techniques confirms the presence of such diameters of gold nanoclusters in BSA-AuNCs. Moreover, in situ formation and migration of Au nanostructures are observed and evidenced after application of either a focused electron beam from HR-TEM, or an X-ray from EDS experiments.

Fast and selective reduction of nitroarenes under visible light with an earth-abundant plasmonic photocatalyst.

Reduction of nitroaromatics to the corresponding amines is a key process in the fine and bulk chemicals industry to produce polymers, pharmaceuticals, agrochemicals and dyes. However, their effective and selective reduction requires high temperatures and pressurized hydrogen and involves noble metal-based catalysts. Here we report on an earth-abundant, plasmonic nano-photocatalyst, with an excellent reaction rate towards the selective hydrogenation of nitroaromatics. With solar light as the only energy input, the chalcopyrite catalyst operates through the combined action of hot holes and photothermal effects. Ultrafast laser transient absorption and light-induced electron paramagnetic resonance spectroscopies have unveiled the energy matching of the hot holes in the valence band of the catalyst with the frontier orbitals of the hydrogen and electron donor, via a transient coordination intermediate. Consequently, the reusable and sustainable copper-iron-sulfide (CuFeS2) catalyst delivers previously unattainable turnover frequencies, even in large-scale reactions, while the cost-normalized production rate stands an order of magnitude above the state of the art.

Light-Induced Migration of Spin Defects in TiO2 Nanosystems and their Contribution to the H2 Evolution Catalysis from Water.

The photocatalytic activity for H2 production from water, without presence of hole scavengers, of thermally reduced TiO2 nanoparticles (H-500, H-700) and neat anatase were followed by in-situ continuous-wave light-induced electron paramagnetic resonance technique (CW-LEPR), in order to correlate the H2 evolution rates with the electronic fingerprints of the photoexcited systems. Under UV irradiation, photoexcited electrons moved from the deep lattice towards the superficially exposed Ti sites. These photogenerated redox sites mediated (e- +h+ ) recombination and were the crucial electronic factor affecting catalysis. In the best-performant system (H-500), a synergic combination of mobile electrons was observed, which dynamically created diverse types of Ti3+ sites, including interstitial Ti3+ , and singly ionized electrons trapped in oxygen vacancies (VO . ). The interplay of these species fed successfully surface exposed Ti4+ sites, which became a catalytically active, fast reacting Ti4+ ⇄Ti3+ state that was key for the H2 evolution process.

Carbon Dots Detect Water-to-Ice Phase Transition and Act as Alcohol Sensors via Fluorescence Turn-Off/On Mechanism.

Highly fluorescent carbon nanoparticles called carbon dots (CDs) have been the focus of intense research due to their simple chemical synthesis, nontoxic nature, and broad application potential including optoelectronics, photocatalysis, biomedicine, and energy-related technologies. Although a detailed elucidation of the mechanism of their photoluminescence (PL) remains an unmet challenge, the CDs exhibit robust, reproducible, and environment-sensitive PL signals, enabling us to monitor selected chemical phenomena including phase transitions or detection of ultralow concentrations of molecular species in solution. Herein, we report the PL turn-off/on behavior of aqueous CDs allowing the reversible monitoring of the water-ice phase transition. The bright PL attributable to molecular fluorophores present on the CD surface was quenched by changing the liquid aqueous environment to solid phase (ice). Based on light-induced electron paramagnetic resonance (LEPR) measurements and density functional theory (DFT) calculations, the proposed kinetic model assuming the presence of charge-separated trap states rationalized the observed sensitivity of PL lifetimes to the environment. Importantly, the PL quenching induced by freezing could be suppressed by adding a small amount of alcohols. This was attributed to a high tendency of alcohol to increase its concentration at the CD/solvent interface, as revealed by all-atom molecular dynamics simulations. Based on this behavior, a fluorescence "turn-on" alcohol sensor for exhaled breath condensate (EBC) analysis has been developed. This provided an easy method to detect alcohols among other common interferents in EBC with a low detection limit (100 ppm), which has a potential to become an inexpensive and noninvasive clinically useful diagnostic tool for early stage lung cancer screening.

Carboxylated Graphene for Radical-Assisted Ultra-Trace-Level Water Treatment and Noble Metal Recovery.

Sorption technologies, enabling removal of heavy metals, play a pivotal role in meeting the global demands for unrestricted access to drinking water. Standard sorption technologies suffer from limited efficiency related to the weak sorbent-metal interaction. Further challenges include the development of technologies enabling smart metal recovery and sorbent regeneration. To this end, a densely functionalized graphene, with 33% by mass content of carboxyl groups, linked through direct C-C bonds (graphene acid, GA) represents a previously unexplored solution to this challenge. GA revealed excellent efficiency for removal of highly toxic metals, such as Cd2+ and Pb2+. Due to its selective chemistry, GA can bind heavy metals with high affinity, even at concentrations of 1 mg L-1 and in the presence of competing ions of natural drinking water, and reduce them down to drinking water allowance levels of a few µg L-1. This is not only due to carboxyl groups but also due to the stable radical centers of the GA structure, enabling metal ion-radical interactions, as proved by EPR, XPS, and density functional theory calculations. GA offers full structural integrity during the highly acidic and basic treatment, which is exploited for noble metal recovery (Ga3+, In3+, Pd2+) and sorbent regeneration. Owing to these attributes, GA represents a fully reusable metal sorbent, applicable also in electrochemical energy technologies, as illustrated with a GA/Pt catalyst derived from Pt4+-contaminated water.

Enhancing Magnetic Cooperativity in Fe(II) Triazole-based Spin-crossover Nanoparticles by Pluronic Matrix Confinement.

Polymeric one-dimensional (1D) triazole-based FeII spin crossover nanoparticles have been entrapped in pluronic P123 matrix, forming nanorods in which the interaction between host (P123) and guest (FeII complex) promoted high reproducibility of the spin crossover process, significant shifts of the transition temperatures (T↑=370 K, T↓=338 K for the P123 entrapped material vs the literature values of T↑=358 K, T↓=341 K for the neat/polymer free system) and larger magnetic hysteresis width.

Smart synthetic maghemite nanoparticles with unique surface properties encode binding specificity toward AsIII.

Pristine ɣ-Fe2O3 nanoparticles, called surface active maghemite nanoparticles (SAMNs) display unprecedented colloidal stability and specific binding properties. Herein, the interactions of SAMNs with AsV and AsIII as surface molecular probes were comparatively studied. Thermodynamic and kinetic characterizations, along with chemical and structural analysis of SAMN@As complexes, evidenced two distinct binding modalities. Arsenite, emerged as an elective and specific ligand for SAMNs, whereas arsenate adsorption was more labile, pH dependent and ruled by different binding possibilities. In particular, AsIII oxyacid exclusively interacts through inner-sphere coordination occupying available surface crystal positions resembling a key-lock fitting, while AsV leads to both outer-sphere and inner-sphere complexes. Noteworthy, discrimination between AsV and AsIII was never reported for nanostructured maghemite evidencing the importance of synthetic route on surface properties of the nanomaterial. The present report, besides enriching the chemistry of nanosized iron oxides, suggests SAMNs application for the remediation of water contaminated by AsIII, the most threatening As species in water.

On the Controlled Loading of Single Platinum Atoms as a Co-Catalyst on TiO2 Anatase for Optimized Photocatalytic H2 Generation.

Single-atom (SA) catalysis is a novel frontline in the catalysis field due to the often drastically enhanced specific activity and selectivity of many catalytic reactions. Here, an atomic-scale defect engineering approach to form and control traps for platinum SA sites as co-catalyst for photocatalytic H2 generation is described. Thin sputtered TiO2 layers are used as a model photocatalyst, and compared to the more frequently used (001) anatase sheets. To form stable SA platinum, the TiO2 layers are reduced in Ar/H2 under different conditions (leading to different but defined Ti3+ -Ov surface defects), followed by immersion in a dilute hexachloroplatinic acid solution. HAADF-STEM results show that only on the thin-film substrate can the density of SA sites be successfully controlled by the degree of reduction by annealing. An optimized SA-Pt decoration can enhance the normalized photocatalytic activity of a TiO2 sputtered sample by 150 times in comparison to a conventional platinum-nanoparticle-decorated TiO2 surface. HAADF-STEM, XPS, and EPR investigation jointly confirm the atomic nature of the decorated Pt on TiO2 . Importantly, the density of the relevant surface exposed defect centers-thus the density of Pt-SA sites, which play the key role in photocatalytic activity-can be precisely optimized.

Microwave Energy Drives "On-Off-On" Spin-Switch Behavior in Nitrogen-Doped Graphene.

The established application of graphene in organic/inorganic spin-valve spintronic assemblies is as a spin-transport channel for spin-polarized electrons injected from ferromagnetic substrates. To generate and control spin injection without such substrates, the graphene backbone must be imprinted with spin-polarized states and itinerant-like spins. Computations suggest that such states should emerge in graphene derivatives incorporating pyridinic nitrogen. The synthesis and electronic properties of nitrogen-doped graphene (N content: 9.8%), featuring both localized spin centers and spin-containing sites with itinerant electron properties, are reported. This material exhibits spin-switch behavior (on-off-on) controlled by microwave irradiation at X-band frequency. This phenomenon may enable the creation of novel types of switches, filters, and spintronic devices using sp2 -only 2D systems.

Biologically safe colloidal suspensions of naked iron oxide nanoparticles for in situ antibiotic suppression.

A category of naked maghemite nanoparticles (γ-Fe2O3), named surface active maghemite nanoparticles (SAMNs), is characterized by biological safety, high water colloidal stability and a surface chemistry permitting the binding of ligands. In the present study, the interaction between SAMNs and an antibiotic displaying chelating properties (oxytetracycline, OxyTC) was extensively structurally and magnetically characterized. OxyTC emerged as an ideal probe for providing insights into the colloidal properties of SAMNs. At the same time, SAMNs turned out as an elective tool for water remediation from OxyTC. Therefore, a dilute colloidal suspension of SAMNs was used for the removal of OxyTC in large volume tanks where, to simulate a real in situ application, a population of zebrafish (Danio rerio) was introduced. Interestingly, SAMNs led to the complete removal of the drug without any sign of toxicity for the animal model. Moreover, OxyTC immobilized on SAMNs surface resulted safe for sensitive Escherichia coli bacteria strain. Thus, SAMNs were able to recover the drug and to suppress its antibiotic activity envisaging their feasibility as competitive option for water remediation from OxyTC in more nature related scenarios. The present contribution stimulates the use of novel smart colloidal materials to cope with complex environmental issues.

Self-assembly of chlorin-e6 on γ-Fe2O3 nanoparticles: Application for larvicidal activity against Aedes aegypti.

Aedes aegypti mosquitos are widespread vectors of several diseases and their control is of primary importance for biological and environmental reasons, and novel safe insecticides are highly desirable. An eco-friendly photosensitizing magnetic nanocarrier with larvicidal effects on Aedes aegypti was proposed. The innovative core-shell hybrid nanomaterial was synthesized by combining peculiar magnetic nanoparticles (called Surface Active Maghemite Nanoparticles - SAMNs, the core) and chlorin-e6 as photosensitizer (constituting the shell) via self-assembly in water. The hybrid nanomaterial (SAMN@chlorin) was extensively characterized and tested for the photocidal activity on larvae of Aedes aegypti. The SAMN@chlorin core-shell nanohybrid did not present any toxic effect in the dark, but, upon light exposure, showed a higher photocidal activity than free chlorin-e6. Moreover, the eco-toxicity of SAMN@chlorin was determined in adults and neonates of Daphnia magna, where delayed toxicity was observed only after prolonged (≥4 h) exposure to intense light, on the green alga Pseudokirchneriella subcapitata and on the duckweed Lemna minor on which no adverse effects were observed. The high colloidal stability, the physico-chemical robustness and the magnetic drivability of the core-shell SAMN@chlorin nanohybrid, accompanied by the high photocidal activity on Aedes aegypti larvae and reduced environmental concerns, can be proposed as a safe alternative to conventional insecticides.