Role of Microstructure in Drug Release from Chitosan Amorphous Solid Dispersions.

The unexpected dissolution behaviour of amorphous diflunisal-chitosan solid dispersions (kneading method) with respect to the crystalline co-evaporated systems is the starting point of this research. This work is an in-depth study of the diflunisal release behaviour from either chitosan or carboxymethylchitosan dispersions. The microstructure is not usually considered when designing this type of products; however, it is essential to understand the process of solvent penetration and subsequent drug release through a polymeric system, as has been evidenced in this study. In accordance with the kinetic data analysed, it is possible to conclude that the porous structure, conditioned by the sample preparation method, can be considered the main factor involved in diflunisal release. The low mean pore size (1-2 µm), low porosity, and high tortuosity of the amorphous kneaded products are responsible for the slow drug release in comparison with the crystalline coevaporated systems, which exhibit larger pore size (8-10 µm) and lower tortuosity. Nevertheless, all diflunisal-carboxymethylchitosan products show similar porous microstructure and overlapping dissolution profiles. The drug release mechanisms obtained can also be related to the porous structure. Fickian diffusion was the main mechanism involved in drug release from chitosan, whereas an important contribution of erosion was detected for carboxymethylchitosan systems, probably due to its high solubility.

A Comprehensive Study of Gemfibrozil Complexation with ß-Cyclodextrins in Aqueous Solution Using Different Analytical Techniques.

Gemfibrozil (GEM) is a hypolipidemic agent, which is effective in reducing serum cholesterol and triglyceride levels. Complexation of GEM with native ß-cyclodextrin (ß-CD) and with the derivatives hydroxypropyl-ß- and randomly methylated ß-CD (HPß-CD and Meß-CD) was studied in aqueous solution of pH 2.8 and 7.0. The stability constants were determined by spectrofluorimetry, 1H-NMR spectroscopy and solubility assays. Considering the well-known difficulties to obtain similar stability constants by different techniques, the agreement of the values obtained supports the reliability of the results presented. The advantages and drawbacks of each analytical technique for the study of inclusion complexation were discussed as well. In addition, the thermodynamic parameters of complexation, enthalpy (ΔH) and entropy (ΔS), were determined and related to the type of molecular interactions that take place between GEM and the different cyclodextrins. Finally, solid dispersions were prepared by co-evaporation, kneading, vacuum desiccation, and coprecipitation, and complexation was evaluated by X-ray diffraction.

Green synthesis and chemometric characterization of hydrophobic xanthan matrices: Interactions with phenolic compounds.

Polysaccharides such as xanthan, locust bean gum or chitosan are easily crosslinked and purified using citric acid in an ecofriendly process. In order to achieve an improved sorption capability towards hydrophobic solutes, ß-cyclodextrin, a cyclic oligosaccharide, and lignin, a natural aromatic polymer, are incorporated in the same process. Once crosslinked, the influence of these on the sorption capacities towards model solutes has been assessed by comparing the sorption isotherms of matrices with or without the hydrophobic modifications. The sorption capacities of these materials for different phenolic compounds have also been tested to ascertain their efficiencies as a function of their affinities to ß-cyclodextrin cavities and/or their partition coefficients. In addition, these functionalized carbohydrate matrices were successfully characterized by principal component analysis, which is a useful tool to select the most appropriate polymers to interact with a specific molecule.

Interpenetrated polymer networks of poly(ß-cyclodextrin) and polyvinylpyrrolidone with synergistic and selective sorption capacities.

Interpenetrating polymer network (IPN) hydrogels were synthesised using ß-cyclodextrin (ß-CD) and N-vynil-2-pyrrolidone (NVP) crosslinked with epichlorohydrin and divinylbenzene, respectively, and prepared by four different procedures: simultaneous, sequential, hybrid and a novel one named hybrid-sequential. The IPNs prepared have been characterised by infrared spectroscopy and thermal analysis. The equilibrium swelling in water and the sorption of model substances into the IPNs have also been studied. The model sorbates (1-naphthol, 2-acetylnaphthalene and tannic acid) were selected according to the affinities towards each one of the two constituent polymers. Our studies reveal that these IPNs can be applied for the sorption of substances that can interact with the network by two mechanisms, i.e. inclusion within cyclodextrin cavities and/or via specific interactions with the functional groups present. Besides, due to the complementary character of their constituent polymers, these networks could also serve to retain two substances of different nature such as cetirizine and pseudoephedrine.

Drug Carrier Systems Based on Cyclodextrin Supramolecular Assemblies and Polymers: Present and Perspectives.

The pharmaceutical applications of cyclodextrins (CDs), cyclic oligosaccharides capable of including hydrophobic molecules inside their cavities, have been known for decades. Besides the solubilising and encapsulating abilities of natural and modified CDs due to the formation of inclusion complexes, there is an increasing interest in organized macrostructures based on CDs as potential drug delivery devices and gene carrier systems. The present review discusses first the case of drug carriers based on monomeric modified CDs (amphiphilic and CD core-star polymers), in which self-assembly plays a major role. Polyrotaxanes, i.e., CDs threaded onto a polymer chain, are then reviewed in relation to their pharmaceutical applications. Finally, covalently linked CDs, either by grafting or crosslinking, are analyzed, including more complex structures formed by assembling CDcontaining networks or chains. We have tried along this review to cover the most recent developments on these structures for drug delivery in a "beyond the cyclodextrin" approach. The review will be helpful, both for readers who want to be introduced into the world of these remarkable structures, or for specialists who are doing research in this field.

Influence of chitosan and carboxymethylchitosan on the polymorphism and solubilisation of diflunisal.

The interactions of diflunisal (DF) with chitosans (CS) of different molecular weights and carboxymethylchitosan (CMCS), a water-soluble derivative, have been investigated. The interactions in solution have been studied by solubility assays in which the highest solubilisation (13-fold) was obtained with CMCS. Solid dispersions were prepared by coevaporation and kneading methods. Solid state characterisation was performed by X-ray diffraction analysis, scanning electron microscopy, thermomicroscopy, differential thermal analysis and infrared spectroscopy. Drug-polymer electrostatic interactions and hydrogen bonds are the main binding forces in these systems. The kneading method gave rise to amorphous systems regardless of the polymer employed. However, coevaporation resulted in the formation of different polymorphs of diflunisal (form II or III) depending on the type of polymer used. Therefore, it seems that drug-polymer interactions determine the crystallization pattern of the drug. Finally, diflunisal release from these systems improved markedly with CMCS and significantly in the presence of low molecular weight CS.

In Vitro release from reverse poloxamine/α-cyclodextrin matrices: modelling and comparison of dissolution profiles.

Gels obtained by complexation of octablock star polyethylene oxide/polypropylene oxide copolymers (Tetronic 90R4) with α-cyclodextrin (α-CD) were evaluated as matrices for drug release. Both molecules are biocompatible so they can be potentially applied to drug delivery systems. Two different types of matrices of Tetronic 90R4 and α-CD were evaluated: gels and tablets. These gels are capable to gelifying in situ and show sustained erosion kinetics in aqueous media. Tablets were prepared by freeze-drying and comprising the gels. Using these two different matrices, the release of two model molecules, L-tryptophan (Trp), and a protein, bovine serum albumin (BSA), was evaluated. The release profiles of these molecules from gels and tablets prove that they are suitable for sustained delivery. Mathematical models were applied to the release curves from tablets to elucidate the drug delivery mechanism. Good correlations were found for the fittings of the release curves to different equations. The results point that the release of Trp from different tablets is always governed by Fickian diffusion, whereas the release of BSA is governed by a combination of diffusion and tablet erosion.

The role of cyclodextrins in ORAC-fluorescence assays. antioxidant capacity of tyrosol and caffeic acid with hydroxypropyl-ß-cyclodextrin.

Tyrosol and caffeic acid are biophenols that contribute to the beneficial properties of virgin olive oil. The influence of hydroxypropyl-ß-cyclodextrin (HPß-CD) on their respective antioxidant capacities was analyzed. The ORAC antioxidant activity of tyrosol (expressed as µM Trolox equivalents/µM Tyrosol) was 0.83 ± 0.03 and it increased up to 1.20 ± 0.11 in the presence of 0.8 mM HPß-CD. However, the ORAC antioxidant activity of caffeic acid experienced no change. The different effect of HPß-CD on each compound was discussed. In addition, the effect of increasing concentrations of different cyclodextrins in the development of ORAC-fluorescence (ORAC-FL) assays was studied. The ORAC signal was higher for HPß-CD, followed by Mß-CD, ß-CD, γ-CD and finally α-CD. These results could be explained by the formation of inclusion complexes with fluorescein.

Influence of soluble and insoluble cyclodextrin polymers on drug release from hydroxypropyl methylcellulose tablets.

BACKGROUND: The influence of beta-cyclodextrin (beta-CD) polymers on drug release from hydroxypropyl methylcellulose (HPMC) matrices has not been reported in the literature. AIM: The influence of monomeric beta-CD and both soluble and insoluble beta-CD polymers on drug release from tablets containing either 30% or 50% hydroxypropyl methylcellulose has been studied using diflunisal (DF) as model drug. METHOD: The DF-beta-CD inclusion complex (1:1 M) was prepared by coevaporation and characterised using X-ray diffraction, differential thermal analysis, and IR spectroscopy. The dissolution assays were performed according to the USP paddle method. RESULTS: The incorporation of beta-CD in the complexed form increases drug release from hydroxypropyl methylcellulose tablets in comparison with the physical mixture because of the better solubilization of the drug. The soluble polymer promotes drug release to a higher extent than the physical mixture with monomeric beta-CD, but the insoluble polymer, which is itself a hydrogel, gives rise to the most retarded release profile, probably by retention of the drug in its structure. The formulations containing physical mixtures with either beta-CD or the soluble polymer present an optimum adjustment to zero-order release kinetics, and the inclusion complex followed non-Fickian diffusion according to the Korsmeyer-Peppas model. CONCLUSION: The release profile of DF from a HPMC matrix can be modulated in different ways by the use of either monomeric or polymeric beta-CD.

Characterization of complexes between naftifine and cyclodextrins in solution and in the solid state.

Naftifine (NF) is an antifungal drug poorly soluble in basic aqueous solutions. Complexation with cyclodextrins (CDs) improves the physicochemical characteristics of many drugs. The aim of this work is to characterize the interactions between NF and alpha-CD, beta-CD, hydroxypropylbeta-CD, methylbeta-CD, and gamma-CD. The studies have been developed in pH 12 aqueous solutions at 25 degrees C and in the solid state. The apparent stability constants of the complexes have been determined from phase-solubility diagrams. In the solid state, crystalline and amorphous complexes have been characterized using X-ray diffraction patterns, thermal analysis, and Fourier transform infrared spectroscopy. The solubility of NF improves with all the CDs studied, with the exception of alpha-CD. Different types of diagrams have been found depending on the CD used. The interaction between NF and hydroxypropylbeta-CD is stronger than that with beta-CD due to the specific properties of the substituents. The coevaporation method can be said the best method in preparing the solid complexes, except for NF-alpha-CD; again, there is no evidence of complexation. Furthermore, the presence of different types of CD structures upon complexation (i.e., cage or channel) has been discussed. Dissolution rate studies have been performed, and a positive influence of complexation in the solid state has been observed.

HPLC and solubility study of the interaction between pindolol and cyclodextrins.

The complexation with beta-cyclodextrin (beta-CD) has been investigated using reversed-phase liquid chromatography. The compounds tested have been pindolol and, for comparison purposes, indole and 4-methoxyindole. The retention behaviour has been analysed on a Kromasil 100 C18 column and the mobile phase used was methanol-pH 6 phosphate buffer (15/85v/v) in which beta-CD was incorporated as a mobile phase additive. The decrease in the retention times with increasing concentrations of beta-CD enables the determination of the apparent stability constants of the complexes. In addition, the low solubility of pindolol, a weak base, in pH 12 aqueous solution has been improved by complexation with different cyclodextrins. The solubility enhancements with 1.4 x 10(-2) M beta-, hydroxypropyl-beta, and gamma-CD have been 1.9, 1.8 and 1.4-fold, respectively, with 2.4 x 10(-2) M methyl-beta-CD it was 2.8-fold whilst no effect was observed with alpha-CD. The stability constants of the complexes at pH 12 have been determined from the solubility isotherms.

A fluorimetric study of pindolol and its complexes with cyclodextrins.

Spectrofluorimetric characteristics of pindolol have been investigated with the aim of using this technique for analytical determinations. Other monosubstituted indole derivatives, 4-methoxy and 5-methoxyindole, have been also studied for comparative purposes. Corrected excitation and emission wavelengths in different solvents are reported and the effect of solvent on the Stokes shifts of these compounds has been analysed using the Lippert equation. In addition, the Stokes shift of pindolol has been determined in dioxan-water solvent mixtures and the presence of specific solvent effects is discussed. The fluorescence of pindolol is pH dependent, the quantum yields determined in water are lower than those in other solvents. With respect to the sensitivity, it has been found that the detection limits in aqueous solutions are improved in the presence of beta and methyl-beta-cyclodextrin. Finally, a fluorimetric analysis of the interaction between pindolol and different cyclodextrins has been carried out in order to determine the apparent stability constants of the complexes and the thermodynamic parameters associated to complexation.