One-step Synthesis of Organic Terminal 2D Ti3C2Tx MXene Nanosheets by Etching of Ti3AlC2 in an Organic Lewis Acid Solvent.

The surface and interface chemistry are critical for controlling the properties of two-dimensional transition metal carbides and nitrides (MXenes). Numerous efforts have been devoted to the functionalization of MXenes with small inorganic ligands; however, few etching methods have been reported on the direct bonding of organic groups to MXene surfaces. In this work, we demonstrated an efficient and rapid strategy for the direct synthesis of 2D Ti3C2Tx MXene nanosheets with organic terminal groups in an organic Lewis acid (trifluoromethanesulfonic acid) solvent, without introducing additional intercalations. The dissolution of aluminum and the subsequent in situ introduction of trifluoromethanesulfonic acid resulted in the extraction of Ti3C2Tx MXene (T=CF3SO3 -) (denoted as CF3SO3H-Ti3C2Tx) flakes with sizes reaching 15 µm and high productivity (over 70 %) of monolayers or few layers. More importantly, the large CF3SO3H-Ti3C2Tx MXene nanosheets had high colloidal stability, making them promising as efficient electrocatalysts for the hydrogen evolution reaction.

A universal and scalable transformation of bulk metals into single-atom catalysts in ionic liquids.

Single-atom catalysts (SACs) with maximized metal atom utilization and intriguing properties are of utmost importance for energy conversion and catalysis science. However, the lack of a straightforward and scalable synthesis strategy of SACs on diverse support materials remains the bottleneck for their large-scale industrial applications. Herein, we report a general approach to directly transform bulk metals into single atoms through the precise control of the electrodissolution-electrodeposition kinetics in ionic liquids and demonstrate the successful applicability of up to twenty different monometallic SACs and one multimetallic SAC with five distinct elements. As a case study, the atomically dispersed Pt was electrodeposited onto Ni3N/Ni-Co-graphene oxide heterostructures in varied scales (up to 5 cm × 5 cm) as bifunctional catalysts with the electronic metal-support interaction, which exhibits low overpotentials at 10 mA cm-2 for hydrogen evolution reaction (HER, 30 mV) and oxygen evolution reaction (OER, 263 mV) with a relatively low Pt loading (0.98 wt%). This work provides a simple and practical route for large-scale synthesis of various SACs with favorable catalytic properties on diversified supports using alternative ionic liquids and inspires the methodology on precise synthesis of multimetallic single-atom materials with tunable compositions.

Electronic Modulation in Cu Doped NiCo LDH/NiCo Heterostructure for Highly Efficient Overall Water Splitting.

Layered double hydroxides (LDHs), promising bifunctional electrocatalysts for overall water splitting, are hindered by their poor conductivity and sluggish electrochemical reaction kinetics. Herein, a hierarchical Cu-doped NiCo LDH/NiCo alloy heterostructure with rich oxygen vacancies by electronic modulation is tactfully designed. It extraordinarily effectively drives both the oxygen evolution reaction (151 mV@10 mA cm-2 ) and the hydrogen evolution reaction (73 mV@10 mA cm-2 ) in an alkaline medium. As bifunctional electrodes for overall water splitting, a low cell voltage of 1.51 V at 10 mA cm-2 and remarkable long-term stability for 100 h are achieved. The experimental and theoretical results reveal that Cu doping and NiCo alloy recombination can improve the conductivity and reaction kinetics of NiCo LDH with surface charge redistribution and reduced Gibbs free energy barriers. This work provides a new inspiration for further design and construction of nonprecious metal-based bifunctional electrocatalysts based on electronic structure modulation strategies.

Realization of tunable-performance in atomic layer deposited Hf-doped In2O3 thin film transistor via oxygen vacancy modulation.

Due to the limitation of inherent ultra-high electron concentration, the electrical properties of In2O3 resemble those of conductors rather than semiconductors prior to special treatment. In this study, the effect of various annealing treatments on the microstructure, optical properties, and oxygen vacancies of the films and transistors is systematically investigated. Our finding reveals a progressive crystallization trend in the films with increasing annealing temperature. In addition, a higher annealing temperature is also associated with the reduction in the concentration of oxygen vacancies, as well as an elevation in both optical transmittance and optical bandgap. Furthermore, with the implementation of annealing process, the devices gradually transform from no pronounced gate control to exhibit with excellent gate control and electrical performances. The atomic layer deposited Hf-doped In2O3 thin film transistor annealed at 250 °C exhibits optimal electrical properties, with a field-effect mobility of 18.65 cm2 V-1 s-1, a subthreshold swing of 0.18 V/dec, and an Ion/Ioff ratio of 2.76 × 106. The results indicate that the impact of varying annealing temperatures can be attributed to the modulation of oxygen vacancies within the films. This work serves as a complementary study for the existing post-treatment of oxide films and provides a reliable reference for utilization of the annealing process in practical applications.

Improving Electrocatalytic Oxygen Evolution through Local Field Distortion in Mg/Fe Dual-site Catalysts.

Transition metal single atom electrocatalysts (SACs) with metal-nitrogen-carbon (M-N-C) configuration show great potential in oxygen evolution reaction (OER), whereby the spin-dependent electrons must be allowed to transfer along reactants (OH- /H2 O, singlet spin state) and products (O2 , triplet spin state). Therefore, it is imperative to modulate the spin configuration in M-N-C to enhance the spin-sensitive OER energetics, which however remains a significant challenge. Herein, we report a local field distortion induced intermediate to low spin transition by introducing a main-group element (Mg) into the Fe-N-C architecture, and decode the underlying origin of the enhanced OER activity. We unveil that, the large ionic radii mismatch between Mg2+ and Fe2+ can cause a FeN4 in-plane square local field deformation, which triggers a favorable spin transition of Fe2+ from intermediate (dxy 2 dxz 2 dyz 1 dz2 1 , 2.96 µB ) to low spin (dxy 2 dxz 2 dyz 2 , 0.95 µB ), and consequently regulate the thermodyna-mics of the elementary step with desired Gibbs free energies. The as-obtained Mg/Fe dual-site catalyst demonstrates a superior OER activity with an overpotential of 224 mV at 10 mA cm-2 and an electrolysis voltage of only 1.542 V at 10 mA cm-2 in the overall water splitting, which outperforms those of the state-of-the-art transition metal SACs.

Tunable-performance all-oxide structure field-effect transistor based atomic layer deposited Hf-doped In2O3 thin films.

The relocation of peripheral transistors from the front-end-of-line (FEOL) to the back-end-of-line (BEOL) in fabrication processes is of significant interest, as it allows for the introduction of novel functionality in the BEOL while providing additional die area in the FEOL. Oxide semiconductor-based transistors serve as attractive candidates for BEOL. Within these categories, In2O3 material is particularly notable; nonetheless, the excessive intrinsic carrier concentration poses a limitation on its broader applicability. Herein, the deposition of Hf-doped In2O3 (IHO) films via atomic layer deposition for the first time demonstrates an effective method for tuning the intrinsic carrier concentration, where the doping concentration plays a critical role in determine the properties of IHO films and all-oxide structure transistors with Au-free process. The all-oxide transistors with In2O3: HfO2 ratio of 10:1 exhibited optimal electrical properties, including high on-current with 249 µA, field-effect mobility of 13.4 cm2 V-1 s-1, and on/off ratio exceeding 106, and also achieved excellent stability under long time positive bias stress and negative bias stress. These findings suggest that this study not only introduces a straightforward and efficient approach to improve the properties of In2O3 material and transistors, but as well paves the way for development of all-oxide transistors and their integration into BEOL technology.

CO2 capture by Li2CaSiO4 and enhancement with alkali carbonates.

Alkali and alkali earth oxides show good CO2 capture performance for carbonation, while their regeneration occurs at high temperatures, leading to a high energy penalty. When alkali oxides and alkali earth oxides combine with SiO2 to form oxysalts, the regeneration temperatures can be reduced, and the CO2 adsorption capacity is maintained. In this study, the reaction between CO2 and Li2CaSiO4, composed of stoichiometric CaO, Li2O, and SiO2, was evaluated thermodynamically by DFT. The synthesized Li2CaSiO4 with and without alkali carbonates was used as CO2 sorbents, and their CO2 adsorption performances were examined using thermal analyses. The phase and morphology of Li2CaSiO4 before and after CO2 adsorption were characterized by XRD and SEM. According to the thermodynamic evaluation and the XRD results, Li2CaSiO4 could adsorb CO2 and form CaCO3 and Li2SiO3. The thermal analyses showed that the regeneration of Li2CaSiO4 started from 575 °C, at which it was difficult to realize the CO2 diffusion through the solid CaCO3 product layer. The mixed alkali carbonates can improve the kinetics and facilitate the CO2 adsorption of Li2CaSiO4. Alkali carbonates were effective in reducing the activation energy of the reaction and CO2 diffusion at low temperatures and improving the cyclic stability because of the dispersing carbonation products.

The Effect of Alkali Metals (Li, Na, and K) on Ni/CaO Dual-Functional Materials for Integrated CO2 Capture and Hydrogenation.

Ni/CaO, a low-cost dual-functional material (DFM), has been widely studied for integrated CO2 capture and hydrogenation. The core of this dual-functional material should possess both good CO2 capture-conversion performance and structural stability. Here, we synthesized Ni/CaO DFMs modified with alkali metals (Na, K, and Li) through a combination of precipitation and combustion methods. It was found that Na-modified Ni/CaO (Na-Ni/CaO) DFM offered stable CO2 capture-conversion activity over 20 cycles, with a high CO2 capture capacity of 10.8 mmol/g and a high CO2 conversion rate of 60.5% at the same temperature of 650 °C. The enhanced CO2 capture capacity was attributed to the improved surface basicity of Na-Ni/CaO. In addition, the incorporation of Na into DFMs had a favorable effect on the formation of double salts, which shorten the CO2 capture and release process and promoted DFM stability by hindering their aggregation and the sintering of DFMs.

Chemically bonding inorganic fillers with polymer to achieve ultra-stable solid-state sodium batteries.

Inorganic/organic composite solid electrolytes (CSEs) have attracted ever-increasing attentions due to their outstanding mechanical stability and processibility. However, the inferior inorganic/organic interface compatibility limits their ionic conductivity and electrochemical stability, which hinders their application in solid-state batteries. Herein, we report a homogeneously distributed inorganic fillers in polymer by in-situ anchoring SiO2 particles in polyethylene oxide (PEO) matrix (I-PEO-SiO2). Compared with ex-situ CSEs (E-PEO-SiO2), SiO2 particles and PEO chains in I-PEO-SiO2 CSEs are closely welded by strong chemical bonds, thus addressing the issue of interfacial compatibility and realizing excellent dendrite-suppression ability. In addition, the Lewis acid-base interactions between SiO2 and salts facilitate the dissociation of sodium salts and increase the concentration of free Na+. Consequently, the I-PEO-SiO2 electrolyte demonstrates an improved Na+ conductivity (2.3 × 10-4 S cm-1 at 60 °C) and Na+ transference number (0.46). The as constructed Na3V2(PO4)3 ‖ I-PEO-SiO2 ‖ Na full-cell demonstrates a high specific capacity of 90.5 mAh g-1 at 3C and an ultra-long cycling stability (>4000 cycles at 1C), outperforming the state-of-the-art literatures. This work provides an effective way to solve the issue of interfacial compatibility, which can enlighten other CSEs to overcome their interior compatibility.

[Prognostic Value of Pre-treatment Albumin/Fibrinogen Ratio in Patients with Diffuse Large B-cell Lymphoma].

OBJECTIVE: To investigate the value of pre-treatment albumin/fibrinogen ratio (AFR) on the prognosis of patients with diffuse large B-cell lymphoma (DLBCL). METHODS: The data of DLBCL patients in the Affiliated Hospital of North Sichuan Medical College from April 2014 to March 2021 were retrieved, and 111 newly diagnosed patients who completed at least 4 cycles of R-CHOP or R-CHOP-like chemotherapy with complete data were included in the study. The clinical, laboratory examination and follow-up data of the patients were collected, and the receiver operating characteristic curve (ROC) was drawn according to patients' AFR before treatment and the survival status at the end of the follow-up, which could be used to preliminarily evaluate the predictive value of AFR for disease progression and patients' survival outcome. Furthermore, the correlation of AFR with the clinical and laboratory characteristics, progression-free survival (PFS) and overall survival (OS) was analyzed, and finally, univariate and multivariate Cox proportional hazard regression models were used to analyze factors affecting PFS and OS of DLBCL patients. RESULTS: The ROC curve indicated that AFR level had a moderate predictive value for PFS and OS in DLBCL patients, with the area under the curve (AUC) of 0.616 (P =0.039) and 0.666 (P =0.004), respectively, and the optimal cut-off values were both 9.06 for PFS and OS. Compared with high-AFR (≥9.06) group, the low-AFR (<9.06) group had a higher proportion of patients with Lugano III-IV stage ( P <0.001), elevated lactate dehydrogenase (P =0.007) and B symptoms (P =0.038). The interim analysis of response showed that the overall response rate (ORR) in the high-AFR group was 89.7%, which was significantly higher than 62.8% in the low-AFR group (P =0.001). With a median follow-up of 18.5 (3-77) months, the median PFS of the high-AFR group was not reached, which was significantly superior to 17 months of the low-AFR group (P =0.009). Similarly, the median OS of high-AFR group was not reached, either, which was significantly superior to 48 months of the low-AFR group (P < 0.001). In multivariate Cox regression analysis, AFR <9.06 was an independent risk factor both for PFS and OS (HR PFS=2.047, P =0.039; HR OS=4.854, P =0.001). CONCLUSION: Pre-treatment AFR has a significant value for the prognosis evaluation in newly diagnosed DLBCL patients.

Optoelectronic Devices of Large-Scale Transferred All-Inorganic Lead Halide Perovskite Thin Films.

We report the large-scale transfer process for monocrystalline CsPbBr3 thin films prepared by chemical vapor deposition (CVD) with excellent optical properties and stability. The transfer process is robust, simple, and effective, in which CsPbBr3 thin films could be transferred to several substrates and effectively avoid chemical or physical fabrication processes to damage the perovskite surface. Moreover, the transfer process endows CsPbBr3 and substrates with atomically clean and electronically flat interfaces. We utilize this transfer process to realize several optoelectronic devices, including a photonic laser with a threshold of 61 µJ/cm2, a photodetector with a responsivity of 2.4 A/W, and a transistor with a hole mobility of 11.47 cm2 V-1 s-1. High device performances mainly originate from low defects of high-quality single-crystal perovskite and seamless contact between CsPbBr3 and target substrates. The large-scale nondestructive transfer process provides promising opportunities for optoelectronic applications based on monocrystalline perovskites.

Recent Advances in Electrochemical-Based Silicon Production Technologies with Reduced Carbon Emission.

Sustainable and low-carbon-emission silicon production is currently one of the main focuses for the metallurgical and materials science communities. Electrochemistry, considered a promising strategy, has been explored to produce silicon due to prominent advantages: (a) high electricity utilization efficiency; (b) low-cost silica as a raw material; and (c) tunable morphologies and structures, including films, nanowires, and nanotubes. This review begins with a summary of early research on the extraction of silicon by electrochemistry. Emphasis has been placed on the electro-deoxidation and dissolution-electrodeposition of silica in chloride molten salts since the 21st century, including the basic reaction mechanisms, the fabrication of photoactive Si films for solar cells, the design and production of nano-Si and various silicon components for energy conversion, as well as storage applications. Besides, the feasibility of silicon electrodeposition in room-temperature ionic liquids and its unique opportunities are evaluated. On this basis, the challenges and future research directions for silicon electrochemical production strategies are proposed and discussed, which are essential to achieve large-scale sustainable production of silicon by electrochemistry.

Molten salt electrosynthesis of Cr2GeC nanoparticles as anode materials for lithium-ion batteries.

The two-dimensional MAX phases with compositional diversity are promising functional materials for electrochemical energy storage. Herein, we report the facile preparation of the Cr2GeC MAX phase from oxides/C precursors by the molten salt electrolysis method at a moderate temperature of 700°C. The electrosynthesis mechanism has been systematically investigated, and the results show that the synthesis of the Cr2GeC MAX phase involves electro-separation and in situ alloying processes. The as-prepared Cr2GeC MAX phase with a typical layered structure shows the uniform morphology of nanoparticles. As a proof of concept, Cr2GeC nanoparticles are investigated as anode materials for lithium-ion batteries, which deliver a good capacity of 177.4 mAh g-1 at 0.2 C and excellent cycling performance. The lithium-storage mechanism of the Cr2GeC MAX phase has been discussed based on density functional theory (DFT) calculations. This study may provide important support and complement to the tailored electrosynthesis of MAX phases toward high-performance energy storage applications.

Microstructural Evolution of SK85 Pearlitic Steel Deformed by Heavy Cold Rolling.

The microstructural evolution of SK85 pearlitic steel cold-rolled up to a 90% rolling reduction was characterized by scanning electron microscopy with electron backscattered diffraction (EBSD) and X-ray diffraction (XRD). SK85 steel exhibits excellent cold rolling performance. The interlamellar spacing of pearlite is refined obviously and a tensile strength of 2318 MPa can be reached for SK85 steel after 90% rolling reduction, an increase of 83% from 1264 MPa before rolling. The EBSD observation indicates that the {001} <110> texture becomes pronounced at a 90% rolling reduction in cold-rolled Sk85 steel. A propagation and multiplication of dislocations occur during rolling as the kernel average misorientation (KAM) angles significantly increase from 0.72° to 2.11°. The XRD analysis reveals that bcc ferrite is transformed into a bct structure at a 90% rolling reduction. The strengthening mechanism was discussed.

Experimental and computational approaches to study the chlorination mechanism of pentlandite with ammonium chloride.

Pentlandite (Fe4.5Ni4.5S8) is the primary source for the metallurgical production of nickel worldwide, however it usually coexists with copper sulfide in nature. To develop an efficient and green process for the separation and extraction of valuable metals from the nickel sulfide concentrate, herein we conducted experimental studies and density functional theory (DFT) calculations to elucidate the chlorination mechanism of pentlandite using ammonium chloride (NH4Cl). First, low-temperature chlorination roasting experiments with NH4Cl were performed in which pentlandite was successfully converted into the corresponding metal chlorides (FeCl2 and NiCl2). Then, the chlorination product was analyzed via energy dispersive spectrometry to reveal the elemental distribution at the cross-section. Results reveal that Fe atoms in pentlandite underwent preferential chlorination to form a chloride layer, whereas Ni atoms remained at the center of the grain. Furthermore, density functional theory calculations were performed to investigate the chlorination mechanism of pentlandite by exploring two possible pathways, involving the adsorption of oxygen (O2), ammonium chloride (NH4Cl) and chlorine (Cl2) on both the (001) and (010) surfaces of pentlandite. Considering that the chlorination of pentlandite was achieved in air atmosphere, we first consider the direct chlorination of pentlandite by NH4Cl in the presence of oxygen. Dissociative oxygen adsorption was found to promote the chlorination process by providing oxygen sites for the dissociation of HCl, which is decomposed from NH4Cl, eventually leading to the formation of H2O and FeCl2 species. Alternatively, the reaction between pentlandite and Cl2 was proved to be feasible thermodynamically.

Revealing the different performance of Li4SiO4 and Ca2SiO4 for CO2 adsorption by density functional theory.

To reveal the difference between Li4SiO4 and Ca2SiO4 in CO2 adsorption performance, the CO2 adsorption on Li4SiO4 (010) and Ca2SiO4 (100) surfaces was investigated using density functional theory (DFT) calculations. The results indicate that the bent configuration of the adsorbed CO2 molecule parallel to the surface is the most thermodynamically favorable for both Li4SiO4 and Ca2SiO4 surfaces. The Li4SiO4 (010) surface has greater CO2 adsorption energy (E ads = -2.97 eV) than the Ca2SiO4 (100) surface (E ads = -0.31 eV). A stronger covalent bond between the C atom of adsorbed CO2 and an OS atom on the Li4SiO4 (010) surface is formed, accompanied by more charge transfer from the surface to CO2. Moreover, the Mulliken charge of OS atoms on the Li4SiO4 (010) surface is more negative, and its p-band center is closer to the E f, indicating OS atoms on Li4SiO4 (010) are more active and prone to suffering electrophilic attack compared with the Ca2SiO4 (100) surface.

Suppressing photoinduced charge recombination at the BiVO4||NiOOH junction by sandwiching an oxygen vacancy layer for efficient photoelectrochemical water oxidation.

Nickel oxyhydroxide (NiOOH) is regarded as one of the promising cocatalysts to enhance the catalytic performance of photoanodes but suffers from serious interfacial charge-carrier recombination at the photoanode||NiOOH interface. In this work, surface-engineered BiVO4 photoanodes are fabricated by sandwiching an oxygen vacancy (Ovac) interlayer between BiVO4 and NiOOH. The surface Ovac interlayer is introduced on BiVO4 by a chemical reduction treatment using a mild reducing agent, sodium hypophosphite. The induced Ovac can alleviate the interfacial charge-carrier recombination at the BiVO4||NiOOH junction, resulting in efficient charge separation and transfer efficiencies, while an outer NiOOH layer is coated to prevent the Ovac layer from degradation. As a result, the as-prepared NiOOH-P-BiVO4 photoanode exhibits a high photocurrent density of 3.2 mA cm-2 at 1.23 V vs. RHE under the irradiation of 100 mW/cm2 AM 1.5G simulated sunlight, in comparison to those of bare BiVO4, P-BiVO4, and NiOOH-BiVO4 photoanodes (1.1, 2.1 and 2.3 mA cm-2, respectively). In addition to the superior photoactivity, the 5-h amperometric measurements illustrate improved stability of the surface-engineered NiOOH-P-BiVO4 photoanode. Our work showcases the feasibility of combining cocatalysts with Ovac, for improved photoactivity and stability of photoelectrodes.

Effect of CO2 on the Desulfurization of Sintering Flue Gas with Hydrated Lime.

The effect of carbon dioxide (CO2) on the desulfurization of sintering flue gas with hydrate (Ca(OH)2) as an absorbent was investigated, and the formation of calcium carbonate (CaCO3) and its effect on the desulfurization was discussed. The competitive relationship between carbon dioxide (CO2) and sulfur dioxide (SO2) with the deacidification agent in sintering flue gas is discussed thermodynamically, showing that sulfates are more likely to be generated under high oxygen potential conditions and that SO2 reacts more preferentially than CO2 under a thermodynamic standard state. The amount of produced CaCO3 increases under the condition that the CO2 concentration is absolutely dominant to SO2 in the sintering flue gas atmosphere. The effect of temperature, humidity and CO2 concentration on the desulfurization of Ca(OH)2 are discussed experimentally. The increasing temperature is not conducive to desulfurization, and the humidity can promote desulfurization, while excessive humidity could inhibit desulfurization. The suitable relative humidity is 20%. In situ generated calcium carbonate has a certain desulfurization effect, but the desulfurization effect is not as good as Ca(OH)2. However, a large proportion of CaCO3 was produced in the desulfurization ash under the condition that CO2 concentration was absolutely dominant to SO2 in the sintering flue gas atmosphere.

Wafer-Scale Synthesis of WS2 Films with In Situ Controllable p-Type Doping by Atomic Layer Deposition.

Wafer-scale synthesis of p-type TMD films is critical for its commercialization in next-generation electro/optoelectronics. In this work, wafer-scale intrinsic n-type WS2 films and in situ Nb-doped p-type WS2 films were synthesized through atomic layer deposition (ALD) on 8-inch α-Al2O3/Si wafers, 2-inch sapphire, and 1 cm2 GaN substrate pieces. The Nb doping concentration was precisely controlled by altering cycle number of Nb precursor and activated by postannealing. WS2 n-FETs and Nb-doped p-FETs with different Nb concentrations have been fabricated using CMOS-compatible processes. X-ray photoelectron spectroscopy, Raman spectroscopy, and Hall measurements confirmed the effective substitutional doping with Nb. The on/off ratio and electron mobility of WS2 n-FET are as high as 105 and 6.85 cm2 V-1 s-1, respectively. In WS2 p-FET with 15-cycle Nb doping, the on/off ratio and hole mobility are 10 and 0.016 cm2 V-1 s-1, respectively. The p-n structure based on n- and p- type WS2 films was proved with a 104 rectifying ratio. The realization of controllable in situ Nb-doped WS2 films paved a way for fabricating wafer-scale complementary WS2 FETs.

Elucidating the promotion of Na2CO3 in CO2 capture by Li4SiO4.

Although Li4SiO4-based sorbents are candidates for CO2 capture at high temperatures, it is still necessary to improve their kinetic activation for adsorption and desorption. Carbonate doping to Li4SiO4 is considered as one of the effective means to improve CO2 capture by Li4SiO4. In this study, Li4SiO4 was synthesized using Li2CO3 and SiO2 at 900 °C, and mixed with different amounts of Na2CO3 as CO2 sorbents. The effects of Na2CO3 on the absorption and desorption were characterized using thermal analyses in an atmosphere of 80 vol% CO2-20 vol% N2. In situ Raman and XRD were used for the characterization of the structural transformations and phase evolution during the CO2 capture. The activation energy of both chemisorption and diffusion in adsorption dropped significantly. The additive Na2CO3 can react with CO2 and produce the pyrocarbonate, which is favorable for CO2 capture of Li4SiO4 and CO2 diffusion. The doped Na2CO3 served two functions: producing the intermediate product and forming the melt with the product Li2CO3 to accelerate CO2 transport. The Na2CO3-doped Li4SiO4 exhibits stable cyclic durability with conversions of 75% in 20 adsorption-desorption cycles.