RESUMEN
We report the structure and charge transport properties of a novel solid-state proton conductor obtained by acid-base chemistry via proton transfer from 12-tungstophosphoric acid to imidazole. The resulting material (henceforth named Imid3WP) is a solid salt hydrate that, at room temperature, includes four water molecules per structural unit. To our knowledge, this is the first attempt to tune the properties of a heteropolyacid-based solid-state proton conductor by means of a mixture of water and imidazole, interpolating between water-based and ionic liquid-based proton conductors of high thermal and electrochemical stability. The proton conductivity of Imid3WP·4H2O measured at truly anhydrous conditions reads 0.8 × 10-6 S cm-1 at 322 K, which is higher than the conductivity reported for any other related salt hydrate, despite the lower hydration. In the pseudoanhydrous state, that is, for Imid3WP·2H2O, the proton conductivity is still remarkable and, judging from the low activation energy (Ea = 0.26 eV), attributed to structural diffusion of protons. From complementary X-ray diffraction data, vibrational spectroscopy, and solid-state NMR experiments, the local structure of this salt hydrate was resolved, with imidazolium cations preferably orienting flat on the surface of the tungstophosphate anions, thus achieving a densely packed solid material, and water molecules of hydration that establish extremely strong hydrogen bonds. Computational results confirm these structural details and also evidence that the path of lowest energy for the proton transfer involves primarily imidazole and water molecules, while the proximate Keggin anion contributes with reducing the energy barrier for this particular pathway.
RESUMEN
Recent density-functional theory (DFT) calculations raised the possibility that diamond could be degenerate with graphite at very low temperatures. Through high-accuracy calorimetric experiments closing gaps in available data, we reinvestigate the relative thermodynamic stability of diamond and graphite. For T<400â K, graphite is always more stable than diamond at ambient pressure. At low temperatures, the stability is enthalpically driven, and entropy terms add to the stability at higher temperatures. We also carried out DFT calculations: B86bPBE-25X-XDM//B86bPBE-XDM and PBE0-XDM//PBE-XDM results overlap with the experimental -TΔS results and bracket the experimental values of ΔH and ΔG, displaced by only about 2× the experimental uncertainty. Revised values of the standard thermodynamic functions for diamond are Δf Ho =-2150±150â J mol-1 , Δf So =3.44±0.03â J K-1 mol-1 and Δf Go =-3170±150â J mol-1 .
RESUMEN
abinit is probably the first electronic-structure package to have been released under an open-source license about 20 years ago. It implements density functional theory, density-functional perturbation theory (DFPT), many-body perturbation theory (GW approximation and Bethe-Salpeter equation), and more specific or advanced formalisms, such as dynamical mean-field theory (DMFT) and the "temperature-dependent effective potential" approach for anharmonic effects. Relying on planewaves for the representation of wavefunctions, density, and other space-dependent quantities, with pseudopotentials or projector-augmented waves (PAWs), it is well suited for the study of periodic materials, although nanostructures and molecules can be treated with the supercell technique. The present article starts with a brief description of the project, a summary of the theories upon which abinit relies, and a list of the associated capabilities. It then focuses on selected capabilities that might not be present in the majority of electronic structure packages either among planewave codes or, in general, treatment of strongly correlated materials using DMFT; materials under finite electric fields; properties at nuclei (electric field gradient, Mössbauer shifts, and orbital magnetization); positron annihilation; Raman intensities and electro-optic effect; and DFPT calculations of response to strain perturbation (elastic constants and piezoelectricity), spatial dispersion (flexoelectricity), electronic mobility, temperature dependence of the gap, and spin-magnetic-field perturbation. The abinit DFPT implementation is very general, including systems with van der Waals interaction or with noncollinear magnetism. Community projects are also described: generation of pseudopotential and PAW datasets, high-throughput calculations (databases of phonon band structure, second-harmonic generation, and GW computations of bandgaps), and the library libpaw. abinit has strong links with many other software projects that are briefly mentioned.
RESUMEN
In the present work, our aim is to decipher the cationic ordering in the octahedral and tetrahedral sheets of two Al-rich synthetic materials, namely, phlogopites of nominal composition K(Mg3-x Alx )[Al1+x Si3-x O10 ](OH)y F2-y and lepidolites in the system trilithionite-polylithionite with composition K (Lix Al3-x )[Al4-2x Si2x O10 ](OH)y F2-y , by directly probing the aluminium distribution through 27 Al and 17 O magic-angle spinning, multiple-quantum magic-angle spinning, and 27 Al-27 Al double-quantum single-quantum nuclear magnetic resonance (NMR) experiments. Notably, 27 Al-27 Al double-quantum single-quantum magic-angle spinning NMR spectra, recorded at 9.34 and/or 20.00 T, show the spatial proximity or avoidance of the Al species inside or between the sheets. In both studied minerals, the ensemble of NMR data suggests a preference for [4] Al in the tetrahedral sheet to occupy position close to the [6] Al of the octahedral sheets.
RESUMEN
We report enhanced protonic and ionic dynamics in an imidazole/protic ionic liquid mixture confined within the nanopores of silica particles. The ionic liquid is 1-octylimidazolium bis(trifluoromethanesulfonyl)imide ([HC8Im][TFSI]), while the silica particles are microsized and characterized by internal well connected nanopores. We demonstrate that the addition of imidazole is crucial to promote a proton motion decoupled from molecular diffusion, which occurs due to the establishment of new N-HN hydrogen bonds and fast proton exchange events in the ionic domains, as evidenced by both infrared and 1H NMR spectroscopy. An additional reason for the decoupled motion of protons is the nanosegregated structure adopted by the liquid imidazole/[HC8Im][TFSI] mixture, with segregated polar and non-polar nano-domains, as clearly shown by WAXS data. This arrangement, promoted by the length of the octyl group and thus by significant chain-chain interactions, reduces the mobility of molecules (Dmol) more than that of protons (DH), which is manifested by DH/Dmol ratios greater than three. Once included into the nanopores of hydrophobic silica microparticles, the nanostructure of the liquid mixture is preserved with slightly larger ionic domains, but effects on the non-polar ones are unclear. This results in a further enhancement of proton motion with localised paths of conduction. These findings demonstrate significant progress in the design of proton conducting materials via tailor-made molecular structures as well as by smart exploitation of confinement effects. Compared to other imidazole-based proton conducting materials that are crystalline up to 90 °C or above, the gel materials that we propose are useful for applications at room temperature, and can thus find applications in e.g. intermediate temperature proton exchange fuel cells.
RESUMEN
The local environments around tellurium atoms in a series of tellurium oxide crystals were probed by 125Te solid-state NMR spectroscopy. Crystals with distinct TeOn units (n from 3 to 6), including Na2TeO3, α-TeO2 and γ-TeO2, Te2O(PO4)2, K3LaTe2O9, BaZnTe2O7, and CsYTe3O8 were studied. The latter four were synthesized through a solid-state process. X-ray diffraction was used to confirm the successful syntheses. The 125Te chemical shift was found to exhibit a strong linear correlation with the Te coordination number. The 125Te chemical-shift components (δ11, δ22, and δ33) of the TeO4 units were further correlated to the O-Te-O-bond angles. With the aid of 125Te NMR, it is likely that these relations can be used to estimate the coordination states of Te atoms in unknown Te crystals and glasses.
RESUMEN
Batteries, fuel cells and solar cells, among many other high-current-density devices, could benefit from the precise meso- to macroscopic structure control afforded by the silica sol-gel process. The porous materials made by silica sol-gel chemistry are typically insulators, however, which has restricted their application. Here we present a simple, yet highly versatile silica sol-gel process built around a multifunctional sol-gel precursor that is derived from the following: amino acids, hydroxy acids or peptides; a silicon alkoxide; and a metal acetate. This approach allows a wide range of biological functionalities and metals--including noble metals--to be combined into a library of sol-gel materials with a high degree of control over composition and structure. We demonstrate that the sol-gel process based on these precursors is compatible with block-copolymer self-assembly, colloidal crystal templating and the Stöber process. As a result of the exceptionally high metal content, these materials can be thermally processed to make porous nanocomposites with metallic percolation networks that have an electrical conductivity of over 1,000 S cm(-1). This improves the electrical conductivity of porous silica sol-gel nanocomposites by three orders of magnitude over existing approaches, opening applications to high-current-density devices.
RESUMEN
(43)Ca and (13)C NMR methods were used to study the chemical interaction of poly(ethylene-vinyl acetate) (PEVAc) admixture in commercial-grade white cement. From (43)Ca NMR it is shown both that PEVAc induces modest changes in the hydrated cement structure, and that hydrated commercial cement is significantly more complex than models that have been used for its structure in past work. The (13)C NMR results show that the PEVAc hydrolysis occurs early in the cement hydration acceleration period, with a rate well-fit by an exponential decay using a time constant of 6±1 days.
RESUMEN
A device using a three-electrode electrochemical cell (referred to as an ECNMR cell) was successfully constructed that could be used in a standard 5mm NMR probe to acquire high-resolution NMR spectra while the working electrode was held at a constant electrical potential. The working electrode was a 20 nm thick gold film thermally coated on the outside of an inner 3mm glass tube. An underlayer consisting of (3-mercaptopropyl)trimethoxy-silane was coated on the glass surface in order to improve its adhesion to gold. Tests showed prolonged life of the gold film. Details of the design and construction of the ECNMR cell are described. The ECNMR cell could be routinely used in a multi-user service high-resolution NMR instrument under oxygen-free conditions in both aqueous and non-aqueous solvents. Different approaches were applied to suppress the noise transmitted between the potentiostat and the NMR spectrometer. These approaches were shown to be effective in reducing background noise in the NMR spectra. The electrochemical and NMR performance of the ECNMR cell is presented. The reduction of 1,4-benzoquinone in both aqueous and non-aqueous solvents was used for testing. The evolution of the in situ ECNMR spectra with time demonstrated that use of the ECNMR cell was feasible. Studies of caffeic acid and 9-chloroanthracene using this ECNMR cell were undertaken to explore its applications, such as monitoring reactions and studying their reaction mechanisms.
Asunto(s)
Electroquímica/instrumentación , Electrodos , Espectroscopía de Resonancia Magnética/instrumentación , Manejo de Especímenes/instrumentación , Transductores , Diseño de Equipo , Análisis de Falla de EquipoRESUMEN
Cluster models of boron oxide glasses are studied computationally using density functional theory. It is shown that the isotropic chemical shielding of boron in boroxol rings is about 5 ppm less than for boron in non-ring BO3/2 units, and that the quadrupole coupling in ring sites is about 0.1 MHz larger than in non-ring sites, confirming assignments made in glasses and crystalline model compounds. The chemical shielding anisotropy of these sites is computed and shown to be in agreement with recent experimental measurements. Furthermore, it is shown that the reason for the different responses is not the co-planarity of BO3/2 groups bound in rings, but rather the contraction in the B-O-B bond angle from about 134 degrees in relaxed structures to 120 degrees as found in rings.
RESUMEN
Polymer colloids with internal ordering were synthesized using hydrolytic condensation of octadecyl-dimethyl(3-trimethoxysilylpropyl)ammonium chloride (ODMACl) and a mixture of ODMACl and the trisodium salt of the triacetic acid N-(trimethoxysilylpropyl)ethylenediamine (TANED). The structure and morphology of these colloids were studied with small-angle X-ray scattering, transmission electron microscopy, nuclear magnetic resonance, sedimentation in ultracentrifuge; and other methods. When polymer colloids are obtained from a single precursor (ODMACl), their local structure, molecular weight characteristics, and morphology strongly depend on the reaction conditions, while lamellar ordering remains nearly unaffected. Use of a mixture of cationic and anionic silanes (ODMACl and TANED) as precursors in hydrolytic condensation results in novel zwitterionic copolymer colloids with two-dimensional hexagonal packing. Interaction of the ODMACl quaternary ammonium groups with the three carboxy groups of TANED leads to replacement of sodium and chloride ions and formation of gegenions, resulting in a molar ratio ODMACl:TANED = 3:1 (each TANED molecule contains three carboxy groups). Due to their ordered interior, polyODMACl (PODMACl) and PODMACl-TANED colloids can be used as templates for controlled positioning of nanoparticles within these colloids. For example, lamellar ordering controls Pt nanoparticle formation within PODMACl colloids providing Pt nanoparticle alignment within the lamellar structure. Loading of PODMACl-TANED colloids with iron salts followed by pH increase results in the formation of iron oxide nanoparticles located within PODMACl-TANED cylinders.
RESUMEN
Solid-state NMR studies of composite polymer electrolytes are reported. The materials consist of polyethylene oxide and an organic inorganic composite, together with a lithium salt, and are candidates for electrolytes in solid-state lithium ion batteries. Silicon and aluminum MAS and multiple quantum MAS are used to characterize the network character of the organic-inorganic composite, and spin diffusion measurements are used to determine the nanostructure of the polymer/composite blending. Multiple quantum spin counting is used to measure the ion aggregation. The NMR results are supported by Raman spectra, calorimetry, and impedance spectroscopy. From these experiments it is concluded that the composite suppresses polymer crystallization without suppressing its local mobility, and also suppresses the tendency for the ions to aggregate. This polymer composite thus appears very promising for application in lithium ion batteries.