RESUMEN
The present study evaluated the effect of different high-power-laser surface treatments on the bond strength between resin cement and disilicate ceramic. Lithium disilicate ceramic specimens with truncated cones shape were prepared and divided into 5 groups: HF (hydrofluoric acid-etching), Er:YAG laser + HF, Graphite + Er:YAG laser + HF, Nd:YAG laser + HF, and Graphite + Nd:YAG laser + HF. The treated ceramic surfaces were characterized with scanning electron microscopy and surface roughness measurement. Hourglasses-shaped ceramic- resin bond specimens were prepared, thermomechanically cycled and stressed to failure under tension. The results showed that for both the factors "laser" and "graphite", statistically significant differences were observed (p < 0.05). Multiple-comparison tests performed on the "laser" factor were in the order: Er:YAG > Nd:YAG (p < 0.05), and on the "graphite" factor were in the order: graphite coating < without coating (p < 0.05). The Dunnett test showed that Er:YAG + HF had significantly higher tensile strength (p = 0.00). Higher surface roughness was achieved after Er:YAG laser treatment. Thus Er:YAG laser treatment produces higher bond strength to resin cement than other surface treatment protocols. Surface-coating with graphite does not improve bonding of the laser-treated lithium disilicate ceramic to resin cement.
RESUMEN
OBJECTIVE: To evaluate the effect of aqueous extract of green tea and the oral antiseptic without alcohol, on Candida albicans biofilm formation to heat-curing acrylic resin plates. BACKGROUND: Candida is associated with oral candidiasis in poorly cleaned dentures. MATERIAL AND METHODS: Standardised specimens of heat-cured (Conv; n = 30) or microwave-cured acrylic resin (Mw; n = 30) were obtained and divided into six groups (n = 10): G1 = Conv resin and green tea aqueous extract, G2 = Conv resin and mouthwash, G3 = control of Conv resin, G4 = Mw resin and green tea aqueous extract, G5 = Mw resin and mouthwash and G6 = control of Mw-cured resin. The specimens were contaminated with 10 ml of Sabouraud dextrose broth inoculated with 0.1 ml of standard suspension containing 1 × 10(6) cells/ml of C. albicans and incubated for 24 h at 37°C. After this period, they were immersed in the aqueous extract or in mouthwash for 15 min. The control groups were treated with sterile distilled water. Aliquots of 0.1 ml were plated on Sabouraud dextrose agar and incubated at 37°C for 24 h. The numbers of colony-forming units per test specimen (CFU/TS) were calculated, and the results statistically analysed by two-way anova and Tukey's tests (5%). RESULTS: Statistically significant difference was observed for the aqueous extract groups (G1; 33.65%) and mouthwash (G2; 17.06%), when compared to control (G3; 100%), for Conv resin. For the Mw resin, there was significant difference between mouthwash (G5; 43.16%) and control (G6; 100%). CONCLUSION: The aqueous extract of green tea and mouthwash led to a reduction in the number of viable fungal cells in biofilm formed on acrylic resin.