RESUMEN
The aim of the present study is to report a clinical case of a patient diagnosed with a late adverse reaction to the injection of filler material - persistent and intermittent delayed swelling (PIDS) - in which photobiomodulation therapy (PBMT) with low-power laser was used for edema reduction. This is an observational, descriptive, and retrospective work of a case report. The female patient, aged 73 years old, had undergone dermal filler six years before and complained of increased volume in the face region (glabellar region, labiomental sulcus, and nasolabial folds) and was submitted to ultrasound and anatomopathological analysis. PBMT using a low-power laser (660 nm and 808 nm, simultaneous irradiation, in contact, 2 J/point, 100 mW) proved to be effective for the non-invasive approach of late adverse reaction to dermal filler, such as PIDS, a common complication related to the use of dermal fillers.
RESUMEN
Objective: To clinically evaluate the effect of the violet light-emitted diode (LED) light (405-410 nm) associated to in-office dental bleaching with 35% carbamide peroxide, on tooth color change and sensitivity. Participant's satisfaction after treatment was also evaluated. Materials and methods: A total of 50 participants were selected and randomized into a treatment group (n = 25): G1-two bleaching sessions of 30 min each, with 7-day interval (D0 and D7); G2-two bleaching sessions (same protocol as G1) associated with violet LED light, 30 min each session. The color evaluation was performed before and after 7 days of the second session (D0 and D14); the medium third of buccal surface of canine and central incisor teeth were evaluated under VITA Shade Guide and spectrophotometry (subjective and objective). Tooth sensitivity was evaluated immediately after the treatment and after 48 h of each bleaching session (D0, D2, D7, and D9), and a self-perception questionnaire was applied on D14. Results: Data were subjected to nonparametric Mann-Whitney test and both canine and central incisor teeth presented color change. Group G2 showed significantly more change than G1. Fisher's exact test showed no statistically significant dental sensitivity differences between groups. Both groups reported a high level of satisfaction but chi-square test showed statistically higher satisfied patients with dental bleaching in G2 than G1. Conclusions: The violet LED light (405-410 nm) could improve dental bleaching effectiveness, without sensitivity increase.
Asunto(s)
Peróxido de Carbamida/administración & dosificación , Blanqueadores Dentales/administración & dosificación , Blanqueamiento de Dientes/métodos , Adulto , Consultorios Odontológicos , Sensibilidad de la Dentina/etiología , Sensibilidad de la Dentina/prevención & control , Femenino , Humanos , Masculino , Rayos UltravioletaRESUMEN
The aim of this study was to longitudinally evaluate mandibular movements, pain, and edema in patients who underwent low-power laser (LPL) phototherapy after bimaxillary orthognathic surgery. A double-blind, randomized, controlled clinical trial was conducted using 30 patients, who were divided into a study group (n = 15) and control group (n = 15). The former group received postoperative LPL (3 J/cm2, 808 nm, and 100 mW) and the latter group received placebo LPL phototherapy. Over a period of 60 days, these groups were evaluated for: mandibular movements - opening, laterality, and protrusion; pain - visual analogue scale; and edema - measured between cephalometric points. The study group showed significantly better jaw opening (p = 0.009), laterality (p = 0.036), and protrusion (p = 0.029) after 2 weeks in most comparisons. The study group showed significantly less postoperative pain (p < 0.001) in most comparisons, and they recovered from pain earlier than the control group. There was a reduction in edema, with no statistically significant difference for most measurements. As observed in most analyses, there were increases in values for all mandibular movements, no significant differences in the occurrence of edema, and decreases in the occurrence of pain.
Asunto(s)
Edema/cirugía , Terapia por Luz de Baja Intensidad , Cirugía Ortognática , Método Doble Ciego , Humanos , Movimiento , Dolor PostoperatorioRESUMEN
The aim of this study was to report the effect of laser phototherapy (LPT) on the treatment of burning mouth syndrome (BMS). This prospective clinical study reports on preliminary outcomes of twenty volunteers diagnosed with BMS who have undergone the conventional treatment prior to laser phototherapy. LPT consisted of weekly sessions of LPT (660 nm), for a period of 10 weeks. The laser protocol consisted of the following parameters: 40 mW, 10 J cm(2) and 0.4 J per point, irradiation time of 10 s. In all sessions, the burning intensity was evaluated with a 10 cm Visual Analogue Scale (VAS). The burning intensity evaluation by VAS was performed immediately before and after each LPT session. Nonparametric test of Wilcoxon was used for statistical analysis, considering a significance level of 5%. All volunteers reported reduced burning intensity in all sessions when compared to the previous one and reduction in VAS scores by up to 49% in the last clinical session when compared to the first session. When only the VAS baseline of the first session was compared with the consecutive sessions, there was a statistically significant reduction in VAS scores in almost all sessions. The LPT may be an alternative treatment for the relief of oral burning symptoms in patients with BMS.
Asunto(s)
Síndrome de Boca Ardiente/terapia , Terapia por Luz de Baja Intensidad , Anciano , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios ProspectivosRESUMEN
Severe dental decay and changes in tooth structure have been reported in association with the use of lithium in Psychiatry, but lithium effects on tooth inorganic composition remain unknown. A 30-year-old woman with bipolar disorder, treated with lithium carbonate presented severe dental decay. Dentin samples from lithium and healthy volunteers were collected and submitted to ionic and ultrastructural analysis. Samples from the lithium patient exhibited irregular peritubular walls and the mineral crystals were irregularly arranged in the intertubular dentin. In addition, a decrease in Mg/P/Ca and an increase of Zn concentrations were detected. These data suggest that the severe dental decay and changes in the tooth structure observed for the lithium-treated patient are related to dentin mineral loss and that this pathological condition is different from caries lesions.
Asunto(s)
Antimaníacos/efectos adversos , Dentina/efectos de los fármacos , Carbonato de Litio/efectos adversos , Desmineralización Dental/inducido químicamente , Adulto , Trastorno Bipolar/tratamiento farmacológico , Calcio/análisis , Cristalografía , Dentina/química , Dentina/ultraestructura , Microanálisis por Sonda Electrónica , Femenino , Humanos , Litio/análisis , Magnesio/análisis , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Fósforo/análisis , Espectrofotometría Atómica , Desmineralización Dental/metabolismo , Desmineralización Dental/patología , Zinc/análisisRESUMEN
BACKGROUND: The use of laser irradiation for dental surface treatment may increase tooth-composite bond strength. Its use on bleached teeth may decrease the waiting time between bleaching and restorative procedures. OBJECTIVE: This study aimed to evaluate the bond strength between a composite resin and bovine enamel bleached with 35% hydrogen peroxide and etched with Er:YAG laser. MATERIALS AND METHODS: Thirty bovine teeth were randomly divided into six groups (n = 5): G1, unbleached and restored 24 h after storage in artificial saliva, etching with 35% phosphoric acid (PA) (control); G2, unbleached and restored 24 h after storage in artificial saliva, etching with Er:YAG laser and 35% PA; G3, bleached and restored immediately afterward, etching with 35% PA; G4, bleached and restored 24 h after bleaching, etching with 35% PA; G5, bleached and restored immediately afterward, etching with Er:YAG and 35% PA laser; G6, bleached and restored 24 h after bleaching, etching with Er:YAG laser and 35% PA. Bond strength was quantitatively evaluated by microtensile test (1.0 mm/min). Data were submitted to statistical analysis using ANOVA and Tukey tests (α = 0.05). RESULTS: Bond strength values (MPa) were G1, 26.17 ± 4.44; G2, 28.87 ± 3.94; G3, 17.25 ± 4.58; G4, 21.93 ± 5.02; G5, 16.69 ± 2.31; and G6, 29.06 ± 8.31. There was no statistically significant difference among groups G1, G2, and G6 (p = 0.119), which presented higher bond strength than group G4, followed by groups G3 and G5. CONCLUSION: Er:YAG irradiation of bleached surfaces may favor bonding procedures when performed 24 h after bleaching.
Asunto(s)
Resinas Compuestas/efectos de la radiación , Recubrimiento Dental Adhesivo , Esmalte Dental/efectos de la radiación , Láseres de Estado Sólido , Blanqueamiento de Dientes , Animales , Bovinos , Reparación de Restauración Dental , Blanqueadores Dentales , Preparación del DienteRESUMEN
Dentin irradiation with erbium lasers has been reported to alter the composite resin bond to this treated surface. There is still a lack of studies reporting the effect of erbium lasers on dentin organic content and elucidating how laser treatment could interfere in the quality of the resin-dentin interface. This study aimed to evaluate the effect of erbium laser irradiation on dentin morphology and microtensile bond strength (µTBS) of an adhesive to dentin. Seventy-two dentin disks were divided into nine groups (n = 8): G1-Control (600-grit SiC paper); Er:YAG groups: G2- 250 mJ/4 Hz; G3- 200 mJ/4 Hz; G4- 180 mJ/10 Hz; G5- 160 mJ/10 Hz; Er,Cr:YSGG groups: G6- 2 W/20 Hz; G7- 2.5 W/20 Hz; G8- 3 W/20 Hz; G9- 4 W/20 Hz. Specimens were processed for cross-sectional analysis by scanning electron microscopy (SEM) (n = 3), transmission electron microscopy (TEM) (n = 2), and adhesive interface (n = 3). Forty-five dentin samples (n = 5) were restored and submitted to µTBS testing. ANOVA (α = 5%) revealed that G1 presented the highest µTBS values and irradiated groups did not differ from each other. TEM micrographs showed a superficial layer of denatured collagen fibrils. For SEM micrographs, it was possible to verify the laser effects extending to dentin subsurface presenting a rough aspect. Cross-sectional dentin micrographs of this hybridized surface revealed a pattern of modified tags with ringlike structures around it. This in vitro study showed that erbium laser irradiation interacts with the dental hard tissue resulting in a specific morphological pattern of dentin and collagen fibrils that negatively affected the bond strength to composite resin.
Asunto(s)
Dentina/efectos de la radiación , Dentina/ultraestructura , Adhesividad , Resinas Compuestas/química , Dentina/química , Humanos , Rayos Láser , Microscopía Electrónica de Rastreo , Microscopía Electrónica de TransmisiónRESUMEN
The purpose of this in vitro study was to compare the bond strength between fiber post and laser-treated root canals. Forty single-rooted bovine teeth were endodontically treated and randomly divided into four groups of equal size according to the root canal treatment: group 1 conventional treatment (without laser irradiation); group 2 Nd:YAG laser (1.5 W, 10 Hz, 100 mJ); group 3 Er,Cr:YSGG laser (0.75 W, 20 Hz); and group 4 Nd:YAG + Er,Cr:YSGG lasers. The fiber posts were cemented with an adhesive system + resin cement, in accordance with the manufacturer's instructions. A mini acrylic pipe was fixed on the coronal section of the post using a light-polymerized resin. Specimens were mounted on an acrylic pipe with a self-polymerized resin. Retention forces were determined using a universal testing machine (0.5 mm/min). Data were analyzed using one-way ANOVA and Tukey tests (p <0.05). The post retention force in group 2 was found to be lower than that in the other experimental groups. Fractures were observed at the interface between the dentin and the resin in all groups. High-intensity lasers can be used in conventional endodontic treatment; however, root canal surface irradiation using the Nd:YAG laser was shown to negatively affect the post retention force.
Asunto(s)
Láseres de Estado Sólido/efectos adversos , Técnica de Perno Muñón , Tratamiento del Conducto Radicular/efectos adversos , Animales , Bovinos , Recubrimiento Dental Adhesivo , Cavidad Pulpar/efectos de la radiación , Cavidad Pulpar/cirugía , Análisis del Estrés Dental , Recubrimientos DentinariosRESUMEN
This study evaluated the effect of different parameters of erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser irradiation on enamel mineral loss in a simulated caries model. Forty-five enamel samples obtained from third molar teeth (3 mmx 3 mm) were randomly divided into five groups (n = 9): G1-Er,Cr:YSGG laser at 0.25 W, 20 Hz, 2.8 J/cm(2); G2-Er,Cr:YSGG laser at 0.50 W, 20 Hz, 5.7 J/cm(2); G3-Er,Cr:YSGG laser at 0.75 W, 20 Hz, 8.5 J/cm(2); G4-sodium fluoride (NaF) dentifrice (positive control); G5-no treatment (negative control). After irradiation, the samples were submitted to 2 weeks of pH cycling. After the acid challenge, the samples were assessed by cross-sectional microhardness at different depths from the enamel surface. Analysis of variance (ANOVA) and Student-Newman-Keuls tests were performed (alpha = 5%). The percentage of lesion inhibition for each group was: G1 37%; G2 38%; G3 64%, and G4 50.5%. Regarding the relative mineral loss values (micrometers x volume percent), groups G1 (1,392 +/- 522) and G2 (1,292 +/- 657) did not differ significantly from each other, but both had higher values than group G3 (753 +/- 287); the groups irradiated with Er,Cr:YSGG laser did not differ from group G4. Although the findings of the study revealed that Er,Cr:YSGG laser irradiation at 8.5 J/cm(2) can be an alternative for the enhancement of the enamel's resistance to acid, lower energy densities also produced a cariostatic potential comparable to the use of fluoride dentifrice.
Asunto(s)
Esmalte Dental/efectos de la radiación , Láseres de Estado Sólido/uso terapéutico , Desmineralización Dental/prevención & control , Ácidos , Caries Dental/prevención & control , Esmalte Dental/efectos de los fármacos , Pruebas de Dureza , Humanos , Concentración de Iones de Hidrógeno , Técnicas In Vitro , Fluoruro de Sodio/farmacologíaRESUMEN
OBJECTIVE: The purpose of this in vitro study was to evaluate the dentine root surface roughness and the adherence of Streptococcus sanguinis (ATCC 10556) after treatment with an ultrasonic system, Er:YAG laser, or manual curette. BACKGROUND DATA: Bacterial adhesion and formation of dental biofilm after scaling and root planing may be a challenge to the long-term stability of periodontal therapy. MATERIALS AND METHODS: Forty flattened bovine roots were randomly assigned to one of the following groups: ultrasonic system (n = 10); Er:YAG laser (n = 10); manual curette (n = 10); or control untreated roots (n = 10). The mean surface roughness (Ra, microm) of the specimens before and after exposure to each treatment was determined using a surface profilometer. In addition, S. sanguinis was grown on the treated and untreated specimens and the amounts of retained bacteria on the surfaces were measured by culture method. RESULTS: All treatments increased the Ra; however, the roughest surface was produced by the curettes. In addition, the specimens treated with curettes showed the highest S. sanguinis adhesion. There was a significant positive correlation between roughness values and bacterial cells counts. CONCLUSION: S. sanguinis adhesion was the highest on the curette-treated dentine root surfaces, which also presented the greatest surface roughness.
Asunto(s)
Adhesión Bacteriana , Raspado Dental/métodos , Infecciones Estreptocócicas/microbiología , Streptococcus sanguis , Raíz del Diente/microbiología , Animales , Bovinos , Dentina/microbiología , Humanos , Terapia por Láser , Aplanamiento de la Raíz/métodos , Saliva/microbiología , Infecciones Estreptocócicas/etiología , Terapia por UltrasonidoRESUMEN
This in vitro study aimed to determine whether the micro-hardness of a composite resin is modified by the light units or by the thickness of the increment. Composite resin disks were divided into 15 groups (n = 5), according to the factors under study: composite resin thickness (0 mm, 1 mm, 2 mm , 3 mm and 4 mm) and light units. The light activation was performed with halogen light (HL) (40 s, 500 mW/cm(2)), argon ion laser (AL) (30 s, 600 mW/cm(2)) or light-emitting diode (LED) (30 s, 400 mW/cm(2)). Vickers micro-hardness tests were performed after 1 week and were carried out on the top surface (0 mm-control) and at different depths of the samples. Analysis of variance (ANOVA) and Tukey tests (P < or = 0.05) revealed no statistically significant difference among the light units for the groups of 0 mm and 1 mm thickness. At 2 mm depth, the AL was not statistically different from the HL, but the latter showed higher micro-hardness values than the LED. In groups with 3 mm and 4 mm thickness, the HL also showed higher micro-hardness values than the groups activated by the AL and the LED. Only the HL presented satisfactory polymerization with 3 mm of thickness. With a 4 mm increment no light unit was able to promote satisfactory polymerization.
Asunto(s)
Resinas Compuestas/efectos de la radiación , Luces de Curación Dental , Láseres de Gas , Pruebas de Dureza , PolímerosRESUMEN
BACKGROUND AND OBJECTIVES: Phototherapy with low intensity laser irradiation has shown to be effective in promoting the proliferation of different cells. The aim of this in vitro study was to evaluate the potential effect of laser phototherapy (660 nm) on human dental pulp stem cell (hDPSC) proliferation. STUDY DESIGN/MATERIALS AND METHODS: The hDPSC cell strain was used. Cells cultured under nutritional deficit (10% FBS) were either irradiated or not (control) using two different power settings (20 mW/6 seconds to 40 mW/3 seconds), with an InGaAIP diode laser. The cell growth was indirectly assessed by measuring the cell mitochondrial activity through the MTT reduction-based cytotoxicity assay. RESULTS: The group irradiated with the 20 mW setting presented significantly higher MTT activity at 72 hours than the other two groups (negative control--10% FBS--and lased 40 mW with 3 seconds exposure time). After 24 hours of the first irradiation, cultures grown under nutritional deficit (10% FBS) and irradiated presented significantly higher viable cells than the non-irradiated cultures grown under the same nutritional conditions. CONCLUSIONS: Under the conditions of this study it was possible to conclude that the cell strain hDPSC responds positively to laser phototherapy by improving the cell growth when cultured under nutritional deficit conditions. Thus, the association of laser phototherapy and hDPSC cells could be of importance for future tissue engineering and regenerative medicine. Moreover, it opens the possibility of using laser phototherapy for improving the cell growth of other types of stem cells.
Asunto(s)
Proliferación Celular/efectos de la radiación , Terapia por Luz de Baja Intensidad , Células Madre/efectos de la radiación , Análisis de Varianza , Células Cultivadas/citología , Células Cultivadas/efectos de la radiación , Pulpa Dental/citología , Relación Dosis-Respuesta en la Radiación , Humanos , Técnicas In Vitro , Probabilidad , Dosis de Radiación , Valores de Referencia , Sensibilidad y Especificidad , Células Madre/citologíaRESUMEN
OBJECTIVE: The aim of the present study was to compare the in vitro effects of the Er:YAG laser, an ultrasonic system, and manual curette on dentine root surface by roughness and micro-morphological analysis. MATERIALS AND METHODS: Thirty-six flattened bovine roots were randomly assigned to one of the following groups: group 1 (n = 12): Er:YAG laser (2940 nm), 120 mJ/pulse, 10 Hz, 8.4 J/cm2; group 2 (n = 12): ultrasonic system; and group 3 (n = 12): manual curette. The mean surface roughness (Ra) of each sample was measured using a profilometer before and after the treatments. The micro-morphology of the treated and untreated (control) root surfaces was evaluated with scanning electron microscopy (SEM) at 50x and 1000x magnification. RESULTS: Analysis with the profilometer showed that for equal times of instrumentation, the smoothest surfaces were produced by the Er:YAG laser and the ultrasonic system, followed by the curette (p < 0.05). Morphological analyses demonstrated that treatment with the Er:YAG laser produced some areas with an irregular surface, craters, and ablation of the intertubular dentin. The smear layer was removed and dentine tubules were opened by both curettes and the ultrasonic system. The micro-morphology of the dentine root surface after ultrasonic treatment, however, demonstrated randomly distributed areas cratering. CONCLUSION: All instruments increased the roughness of the dentine root surface after treatment; however, the curette produced rougher surfaces than the other devices. SEM analysis revealed distinct root surface profiles produced by the three devices.
Asunto(s)
Legrado/instrumentación , Raspado Dental/instrumentación , Dentina/efectos de la radiación , Láseres de Estado Sólido , Raíz del Diente/efectos de la radiación , Terapia por Ultrasonido/instrumentación , Animales , Bovinos , Dentina/cirugía , Dentina/ultraestructura , Propiedades de Superficie/efectos de la radiación , Técnicas de Cultivo de Tejidos , Raíz del Diente/cirugía , Raíz del Diente/ultraestructuraRESUMEN
This study tested if dentin adhesion is affected by Er:YAG laser. Ninety dentin disks were divided in groups (n = 10): G1, control; G2, Er:YAG laser 150 mJ, 90 degrees contact, 38.8 J/cm(2); G3, Er:YAG laser 70 mJ, 90 degrees contact, 18.1 J/cm(2); G4, Er:YAG laser 150 mJ, 90 degrees non-contact, 1.44 J/cm(2); G5, Er:YAG laser 70 mJ, 90 degrees non-contact, 0.67 J/cm(2); G6, Er:YAG laser 150 mJ, 45 degrees contact, 37.5 J/cm(2); G7, Er:YAG laser 70 mJ, 45 degrees contact, 17.5 J/cm(2); G8, Er:YAG laser 150 mJ, 45 degrees non-contact, 1.55 J/cm(2); and G9, Er:YAG laser 70 mJ, 45 degrees non-contact, 0.72 J/cm(2). Bonding procedures were carried out and the micro-shear-bond strength (MSBS) test was performed. The adhesive surfaces were analyzed under SEM. Two-way ANOVA and multiple comparison tests revealed that MSBS was significantly influenced by the laser irradiation (p < 0.05). Mean values (MPa) of the MSBS test were: G1 (44.97 +/- 6.36), G2 (23.83 +/- 2.46), G3 (30.26 +/- 2.57), G4 (35.29 +/- 3.74), G5 (41.90 +/- 4.95), G6 (27.48 +/- 2.11), G7 (34.61 +/- 2.91), G8 (37.16 +/- 1.96), and G9 (41.74 +/- 1.60). It was concluded that the Er:YAG laser can constitute an alternative tool for dentin treatment before bonding procedures.
Asunto(s)
Adhesividad/efectos de la radiación , Aluminio , Resinas Compuestas/efectos de la radiación , Recubrimiento Dental Adhesivo/instrumentación , Dentina/fisiología , Rayos Láser , Terapia por Luz de Baja Intensidad/instrumentación , Resistencia al Corte , Itrio , Colágeno/efectos de la radiación , Recubrimiento Dental Adhesivo/métodos , Relación Dosis-Respuesta en la Radiación , Erbio , Humanos , Terapia por Luz de Baja Intensidad/métodos , MetacrilatosRESUMEN
OBJECTIVE: This in vitro study evaluated the influence of both Er:YAG and Nd:YAG laser irradiation on deciduous enamel demineralization. BACKGROUND DATA: Although there are still few studies on the use of the high-intensity laser for caries prevention in deciduous teeth, it is believed that its use on the dental structure can lead to a more acid-resistant surface. METHODS: Forty enamel samples obtained from 22 deciduous first molar teeth were ground and randomly divided into four groups (n = 10): group 1 (G1), no treatment (negative control); G2, fluoride (positive control); G3, Er:YAG laser (2 Hz, 60 mJ, 40.3 J/cm(2)); G4, Nd:YAG laser (80 mJ, 10 Hz, 0.8 W). After the surface treatment, the samples were submitted to an acid challenge that consisted of a 5-day immersion in demineralizing (3 h) and remineralizing solution (21 h). Next, a microhardness test was preformed. RESULTS: Analysis of variance (ANOVA) and Student Newman Keuls tests were performed (alpha = 5%). The percentage of lesion inhibition for each group was as follows: G2, 59.4%; G3, 35.7%; and G4, 40.4%. As regards the percentage loss of mineral volume, there was no statistical difference between groups G2 (444.37 +/- 146.42) and G3 (441.81 +/- 207.08) when compared with group G1 (281.03 +/- 134.57). All experimental groups presented a lower mineral loss compared with the non-irradiated samples (G4). CONCLUSION: The findings of the present study revealed that both Nd:YAG and Er:YAG lasers can be an alternative tool for enhancing deciduous enamel acid resistance.
Asunto(s)
Esmalte Dental/efectos de la radiación , Rayos Láser , Desmineralización Dental/prevención & control , Diente Primario/efectos de la radiación , Susceptibilidad a Caries Dentarias/efectos de la radiación , Humanos , Diente MolarRESUMEN
Although some studies claim to the increase of composite resin adhesion to Er:YAG-laser-treated dentin, there are still no reports on the adhesion of composite resin cements to the irradiated surface. This in vitro study evaluated the tensile bond strength (TBS) of a composite resin cement to dentin treated with the Er:YAG laser. Sixty human dentin samples were divided into four groups (n = 15): G1 (Control)-no treatment; G2-Er:YAG laser 60 mJ, 2 Hz, with water cooling, non-contact (19 J/cm(2)); G3-Er:YAG laser 60 mJ, 10 Hz, 50/10 fiber, contact, without water cooling (40 J/cm(2)); G4-Er:YAG laser 60 mJ, 10 Hz, 50/10 fiber, contact, with water cooling (40 J/cm(2)). After the surface treatment, each sample was submitted to bonding procedures. The analysis of variance (ANOVA) and Tukey tests revealed no statistical significant difference on TBS values for groups G1 (13.73 +/- 3.05 MPa), G2 (12.60 +/- 2.09 MPa) and G4 (11.17 +/- 4.04 MPa). G4 was not statistically different from G3 (8.64 +/- 2.06 MPa). Er:YAG laser irradiation with different settings can constitute an alternative tool to the use of composite resin-luting cements.
Asunto(s)
Resinas Compuestas , Dentina/efectos de la radiación , Láseres de Estado Sólido , Humanos , Técnicas In Vitro , Resistencia a la Tracción , Adherencias TisularesRESUMEN
BACKGROUND AND OBJECTIVES: This study evaluated the effect of Er:YAG laser on enamel acid resistance. STUDY DESIGN/MATERIALS AND METHODS: Seventy human enamel slabs were randomly divided into seven groups (n = 10): G1, Er:YAG laser (Key Laser 2, KaVo, Germany) 60 mJ, 2 Hz, 33.3 J/cm2 (handpiece no. 2051, non-contact); G2, Er:YAG laser 80 mJ, 2 Hz, 44.4 J/cm2 (handpiece no. 2051, non-contact); G3, Er:YAG laser 120 mJ, 2 Hz, 66.6 J/cm2 (handpiece no. 2051, non-contact); G4, Er:YAG laser 64 mJ, 2 Hz, 20 J/cm2 (handpiece no. 2055, contact); G5, Er:YAG laser 86.4 mJ, 2 Hz, 26.9 J/cm2 (handpiece no. 2055, contact); G6, Er:YAG laser 135 mJ, 2 Hz, 42.2 J/cm2 (handpiece no. 2055, contact); G7, control. After laser irradiation, samples were submitted to an acid challenge. For both the nos. 2051 and 2055 handpieces, irradiation was performed with a water cooled spray (5.0 ml/minutes). The calcium and phosphorous ions delivered from the tooth surface were quantified by atomic emission spectrometry, and morphological analysis of the enamel surface was performed under scanning electron microscopy. Kruskal-Wallis and multiple comparisons tests were applied to distinguish significant differences among the treatments (alpha = 5%). RESULTS: Groups G1, G2, and G4 presented decreased demineralization. The SEM evaluation revealed different surface alterations as a result of the different energies used. CONCLUSION: Lower energies can decrease enamel solubility without severe alterations of the enamel.
Asunto(s)
Caries Dental/radioterapia , Esmalte Dental/efectos de la radiación , Terapia por Luz de Baja Intensidad/métodos , Diente Molar/ultraestructura , Ácidos , Preparación de la Cavidad Dental/métodos , Erbio , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Muestreo , Resistencia a la TracciónRESUMEN
BACKGROUND AND OBJECTIVES: This in vitro study evaluated the influence of a flowable composite resin (FCR) on the tensile bond strength of resin to dentin treated with the Er:YAG Laser (L) and diamond bur (DB). STUDY DESIGN/MATERIALS AND METHODS: Ninety dentin surfaces obtained from 45 third molars were ground and randomly divided into six groups (n = 15): G1-DB, G2-DB+FCR, G3-L (100 mJ, 10 Hz, 37.04 J/cm2), G4-L (100 mJ, 10 Hz, 37.04 J/cm2)+FCR, G5-L (250 mJ, 2 Hz, 92.60 J/cm2), and G6-L (250 mJ, 2 Hz, 92.60 J/cm2)+FCR. After surface etching with 37% phosphoric acid and the application of an adhesive system, inverted conical specimens were prepared with a hybrid composite resin. In groups G2, G4, and G6 a FCR was placed before the hybrid composite resin. After 24 hours-storage in distilled water, the tensile test was performed in a universal testing machine (0.5 mm/minute, 500 N). RESULTS: Data were submitted to Kruskal Wallis test (P = 0.01). The mean bond strength values (MPa+/-SD) were: G1-13.54 (+/-2.99), G2-14.67 (+/-2.32), G3-9.49 (+/-3.09), G4-14.60 (+/-2.76), G5-8.97 (+/-3.89), and G6-13.02 (+/-2.18). Groups G1 and G2 presented the highest bond strength values, which were statistically similar to those of G4 and G6. The groups treated with laser and without the FCR (G3 and G5) showed the lowest shear bond strength values. CONCLUSIONS: FCR can increase the adhesion to dentin treated with Er:YAG laser within different parameters.
Asunto(s)
Adhesividad/efectos de la radiación , Resinas Compuestas , Recubrimiento Dental Adhesivo , Dentina/efectos de la radiación , Rayos Láser , Resistencia a la Tracción , Adulto , Aluminio , Relación Dosis-Respuesta en la Radiación , Erbio , Humanos , Técnicas In Vitro , Metacrilatos , ItrioRESUMEN
BACKGROUND AND OBJECTIVES: This study evaluated the ultrastructural changes in dentin after treatment with the Nd:YAG laser and/or metal salt solutions and verified the presence of Sn++, Sr++, and F- in dentin structure. STUDY DESIGNS/MATERIALS AND METHODS: Sixty dentin disks were randomly divided into groups (n = 10): (I) control (no treatment), (II) Nd:YAG (1.5 W, 100 mJ, 15 Hz, 125 J/cm2), (III) 10% SnF2 aqueous solution for 30 minutes, (IV) Nd:YAG+10% SnF2 aqueous solution for 30 minutes, (V) 10% SrCl2 toothpaste for 30 minutes, (VI) Nd:YAG+10% SrCl2 toothpaste for 30 minutes. Then, all samples were prepared for scanning electron microscopy (SEM) and the samples from Groups I to IV for the energy dispersive X-ray microanalysis (EDX). RESULTS: SEM evaluation revealed occluded dentinal tubules and a dentin surface altered by the laser irradiation. The EDX microanalysis revealed Sn++ at a depth of 250 microm in Group IV and not deeper than 100 microm in Group III. In Group V, Sr++ was not deeper than 50 microm, but it could be detected at a depth of 500 microm in Group VI. F- was found only in Group IV. CONCLUSIONS: Ultrastructural changes caused by laser irradiation can increase dentin uptake of Sn++, Sr++, and F-.