Use of In silico Methodologies to Predict the Bioavailability of Oral Suspensions: A Regulatory Approach.

BACKGROUND: Oral suspensions are heterogeneous disperse systems, and the particle size distribution, crystalline form of the dispersed solid, and composition of the formulation can be listed as parameters that control the drug dissolution rate and its bioavailability. OBJECTIVE: The aim of this work was to develop a discriminative dissolution test, which, in association with in silico methodologies, can make it possible to safely anticipate bioavailability problems. METHODS: Nimesulide and ibuprofen (BCS class II) and cephalexin (BCS class I) oral suspensions were studied. Previously, solid-state structure and particle size in active pharmaceutical ingredients were characterized and the impact of differences on solubility was evaluated for the choice of discriminative medium. Afterwards, particle size distribution (0.1 to 360 µm), dissolution profile, and in vitro permeability in Caco-2 cell of commercial suspensions, were determined. These parameters were used as input for the establishment of the in vitro-in vivo correlation (IVIVC) for the suspensions using the GastroPlus™ with Wagner-Nelson and Loo- Riegelmann deconvolution approach. RESULTS: The predicted/observed pharmacokinetic model showed good correlation coefficients (r) of 0.960, 0.950, and 0.901, respectively. The IVIVC was established for one nimesulide and two ibuprofen suspensions with r between 0.956 and 0.932, and the percent prediction error (%PE) did not exceed 15%. CONCLUSION: In this work, we have performed a complete study combining in vitro/in silico approaches with the aim of anticipating the safety and efficacy of oral pharmaceutical suspensions in order to provide a regulatory tool for this category of products in a faster and more economical way.

Development of SEDDS formulation containing caffeine for dermal delivery.

OBJECTIVE: The objective of this work was to develop a self-emulsifying drug delivery system (SEDDS) containing caffeine for the treatment of cellulite. METHODS: SEDDS were prepared using the solution method. 0.5% (w/v) caffeine was added to the previously selected excipients. The system was characterized by droplet size, zeta potential, emulsification time and long-term stability. In vitro release and skin permeation were investigated using Franz-type diffusion cells. The cytotoxicity was evaluated on normal human keratinocytes. RESULTS: Caffeine SEDDS were thermodynamically stable, with a zeta potential less than - 22 mV and droplet size around 30 nm, and were long-term stable. The permeation study showed that the formulation promoted caffeine accumulation in the skin layers, suggesting an increase in local circulation. Cytotoxicity studies on HaCaT cells were not conclusive as the surfactant used indicated false-positive results due to its high molar mass. CONCLUSION: It was possible to obtain a stable SEDDS that could cause an increase in blood flow in the applied area, resulting in cellulite reduction.

OBJECTIF: L'objectif de ce travail était de développer un système d'administration de médicaments auto-émulsifiants (SEDDS) contenant de la caféine pour le traitement de la cellulite. MÉTHODES: Les SEDDS ont été préparés par la méthode en solution. 0,5 % (p/v) de caféine a été ajouté aux excipients préalablement sélectionnés. Le système a été caractérisé par la taille des gouttelettes, le potentiel zêta, le temps d'émulsification et la stabilité à long terme. La libération in vitro et la perméation cutanée ont été étudiées dans des cellules de diffusion de type Franz. La cytotoxicité était évaluée sur des kératinocytes humains normaux. RÉSULTATS: Les SEDDS de caféine étaient thermodynamiquement stables, avec un potentiel Zeta inférieur à -22 mV et une taille de gouttelettes d'environ 30 nm, et stables à long terme. L'étude de perméation a montré que les formulations favorisent l'accumulation de caféine dans les couches de la peau, suggérant une augmentation de la circulation locale. Les études de cytotoxicité sur les cellules HaCaT n'ont pas été concluantes car le surfactant utilisé indique des résultats faussement positifs dus à une masse molaire élevée. CONCLUSION: Il a été possible d'obtenir un SEDDS stable qui peut provoquer une augmentation du flux sanguin dans la zone appliquée, entraînant une réduction de la cellulite.

Alternative Methods for Pulmonary-Administered Drugs Metabolism: A Breath of Change.

Prediction of pulmonary metabolites following inhalation of a locally acting pulmonary drug is essential to the successful development of novel inhaled medicines. The lungs present metabolic enzymes, therefore they influence drug disposal and toxicity. The present review provides an overview of alternative methods to evaluate the pulmonary metabolism for the safety and efficacy of pulmonary delivery systems. In vitro approaches for investigating pulmonary drug metabolism were described, including subcellular fractions, cell culture models and lung slices as the main available in vitro methods. In addition, in silico studies are promising alternatives that use specific software to predict pulmonary drug metabolism, determine whether a molecule will react with a metabolic enzyme, the site of metabolism (SoM) and the result of this interaction. They can be used in an integrated approach to delineate the major cytochrome P450 (CYP) isoforms to rationalize the use of in vivo methods. A case study about a combination of experimental and computational approaches was done using fluticasone propionate as an example. The results of three tested software, RSWebPredictor, SMARTCyp and XenoSite, demonstrated greater probability of the fluticasone propionate being metabolized by CYPs 3A4 at the S1 atom of 5-S-fluoromethyl carbothioate group. As the in vitro studies were not able to directly detect pulmonary metabolites, those alternatives in silico methods may reduce animal testing efforts, following the principle of 3Rs (Replacement, Reduction and Refinement), and contribute to the evaluation of pharmacological efficacy and safety profiles of new drugs in development.

In vitro transdermal drug permeation tests: a regulatory scenario evaluation

SUMMARY Introduction: The Transdermal Drug Delivery Systems (TDDS) could circumvent the inconveniences of oral administration, increasing treatment adhesion. Meanwhile, despite being highly widespread systems, there are discrepancies between the performance and quality control methodologies recommended by the leading regulatory agencies, which is an issue for the pharmaceutical industry. Aim: To identify and to compare the requirements for TDDS regulatory approval by important agencies, focusing on the in vitro release and drug permeation studies, which are crucial tests for the evaluation of safety, efficacy, and performance of these systems. Methods: The documents that regulate the scope of TDDS in FDA, EMA and Anvisa were analyze, as well as the contributions of OECD. In addition, an approaching regarding the pharmacopeial requirements was made regarding USA, Europe, and Brazil. Results and conclusion: Concerning the regulatory approval aspects, the FDA is reviewing its documents because the current guidance is not specific to transdermal systems. On the other hand, the EMA presents a unique guideline that includes specific requirements for TDDS. The USA and the European Pharmacopoeias have specific mentions to performance and quality control of TDDS, while the Brazilian Pharmacopoeia does not mention this dosage form. Recently, Anvisa published a guide, which helps Brazilian manufacturers concerning the tests required for the regulatory approval of a new TDDS. The launch of this standardized national statute associated with the use of a validated in vitro release and permeation tests represents a remarkable breakthrough regarding TDDS.

Introducción: los sistemas de administración de fármacos transdérmicos (TDDS) podrían sortear los inconvenientes de la administración por vía oral, aumentando la adherencia al tratamiento. Mientras tanto, a pesar de ser sistemas muy extendidos, existen discrepancias entre las metodologías de desempeño y control de calidad recomendadas por las principales agencias reguladoras, lo cual es un problema para la industria farmacéutica. Objetivo: identificar y comparar los requisitos para la aprobación regulatoria de TDDS por parte de las principales agencias reguladoras, enfocándose en los estudios de liberación in vitro y premiación de fármacos. Métodos: se analizaron los documentos que regulan el alcance de la TDDS en la FDA, EMA y Anvisa, así como los aportes de la OCDE. Además, se realizó un planteamiento sobre los requisitos de las farmacopeas de los Estados Unidos, Europa y Brasil. Resultados y conclusión: la FDA está revisando los aspectos de aprobación regulatoria porque la guía actual no es específica para los sistemas transdérmicos. Por otro lado, la EMA presenta una guía única que incluye requisitos específicos para TDDS. Las farmacopeas de los Estados Unidos e Europa tienen menciones específicas al rendimiento y control de calidad de TDDS, mientras que la Farmacopea brasileña no menciona esta forma de dosificación. Recientemente, Anvisa publicó una guía que ayuda a los fabricantes brasileños en cuanto a las pruebas requeridas para la aprobación regulatoria de un nuevo TDDS. El lanzamiento de este estatuto nacional estandarizado asociado con el uso de pruebas validadas de liberación y premiación in vitro representa un avance notable con respecto a TDDS.

Introdução: os sistemas de liberação transdérmica (SLT) são capazes de contornar as desvantagens da administração oral de medicamentos, aumentando a adesão ao tratamento. Entretanto, apesar de serem sistemas difundidos, existem discrepâncias entre as metodologias de desempenho e controle de qualidade recomendadas pelas agências regulatórias, dificultando o desenvolvimento destes pela indústria farmacêutica. Objetivo: identificar e comparar os requisitos para aprovação regulatória de SLT por importantes agências regulatórias, com foco nos estudos de liberação e permeação de fármacos in vitro, testes fundamentais para avaliação da segurança, eficácia e desempenho desses sistemas. Métodos: foram analisados os documentos que regulam o escopo dos SLT publicados pela FDA, EMA e Anvisa e as contribuições da OCDE. Além disso, foi realizada a abordagem sobre os requisitos farmacopeicos nos Estados Unidos, Europa e Brasil. Resultados e conclusão: FDA está revisando os aspectos de aprovação regulatória, pois os documentos atuais não são específicos para os SLT. Em contraponto, a EMA apresenta uma diretriz única que inclui requisitos específicos para estes sistemas. Em relação às farmacopeias, enquanto EUA e Europa apresentam recomendações específicas para desempenho e controle de qualidade dos SLT, a Farmacopeia brasileira não menciona esta forma farmacêutica. Recentemente, a Anvisa publicou um guia com os testes necessários para o registro destes sistemas. O lançamento de tal publicação, associado a ensaios devidamente validados representam um avanço notável no escopo regulatório dos SLT.

Development of rivaroxaban microemulsion-based hydrogel for transdermal treatment and prevention of venous thromboembolism.

We have developed a microemulsion (ME)-based hydrogel, containing propylene glycol, Azone®, Labrasol®, isobutanol and water (20:3:18:3:56), for the transdermal delivery of rivaroxaban (RVX). Formulation ME-1:RVX, which was loaded with 0.3 mg/g of RVX, presented as a clear, homogenous fluid with a droplet size of 82.01 ± 6.32 nm and a PdI of 0.207 ± 0.01. To provide gelation properties, 20 % (w/w) of Pluronic® F-127 was added to ME-1:RVX to generate formulation PME-1a. An added benefit was an increased capacity for RVX to 0.4 mg/g (formulation PME-1b). PME-1b displayed spherical droplets with a nanoscale diameter as observed by Transmission Electron Microscopy. The release of RVX from PME-1b was 20.71 ± 0.76 µg/cm2 with a permeation through pig epidermis of 18.32 ± 8.87 µg/cm2 as measured in a Franz Cell for 24 h. PME-1b presented a pseudoplastic behavior, pH value compatible with the skin and good stability over 60 days at room and elevated temperatures. The prothrombin time was assessed for each concentration of RVX obtained in the permeation assay and each demonstrated a relevant anticoagulant activity. PME-1b also presented no cytotoxicity against HaCaT cells. Utilizing GastroPlus® software, an in silico analysis was performed to simulate the delivery of PME-1b through a transdermal system that suggested a minimum dose of RVX for the treatment and prevention of venous thromboembolism could be achieved with an 8 h administration regimen. These results suggest that PME-1b is a promising transdermal formulation for the effective delivery of RVX that could be a viable alternative for the treatment and prevention of venous thromboembolism.

Development of purified cashew gum mucoadhesive buccal tablets containing nystatin for treatment of oral candidiasis.

OBJECTIVE: The objective of this work was to prepare mucoadhesive buccal tablets containing nystatin and purified cashew gum for the treatment of oral candidiasis. SIGNIFICANCE: Mucoadhesive buccal tablets containing the drug nystatin are an alternative to oral suspensions, which cause low therapeutic adherence to the treatment of oral candidiasis. Purified cashew gum has been studied as a diluent and mucoadhesive agent in tablets. METHODS: Two batches of mucoadhesive tablets were produced, MT1 and MT 2, containing purified cashew gum, nystatin (500,000 IU), flavoring agent and with or without the presence of lubricant agent. The average weight, mechanical properties, dose uniformity, drug release profile, mucoadhesive properties and antimicrobial activity against Candida albicans were evaluated. RESULTS: Tablets presented average weight of 329.1 ± 3.1 mg (MT1) and 334.6 ± 1.5 mg (MT2), hardness of 9.8 ± 0.8 KgF (MT1) and 8.3 ± 0.4 KgF (MT2), friability of 0.2% (MT1 and MT2), and dose uniformity of 102.20 ± 1.17% (MT1) and 99.06 ± 7.40% (MT2). MT1 and MT2 were able to swell, erode, release the drug and remain adhered to the pig's cheek up to 3 h for batch MT1 and 4 h for batch MT2, and the amount of nystatin released since the beginning of the test in both batches was sufficient to inhibit the growth of the fungus. CONCLUSIONS: Therefore, the proposed formulation proved to be very promising and met all the studied criteria, showing to be ideal for the treatment of oral candidiasis.

Clofazimine functionalized polymeric nanoparticles for brain delivery in the tuberculosis treatment.

Central nervous system tuberculosis (CNS-TB) is the most severe form of the disease especially due to the inability of therapeutics to cross the blood-brain barrier (BBB). Clofazimine (CFZ) stands out for presenting high in vitro activity against multi-drug resistant strains of Mycobacterium tuberculosis, however, CFZ physicochemical and pharmacokinetics properties limit drug penetration into the CNS and, consequently, its clinical use. The aim of this work was to develop polymeric nanoparticles (NPs) of poly(lactic-co-glycolic acid) (PLGA) and polyethylene glycol (PEG) loaded with CFZ and functionalized with a transferrin receptor (TfR)-binding peptide, aiming brain drug delivery for CNS-TB treatment by the intravenous route. The poor water solubility and high lipophilicity of CFZ was overcome through its entrapment into PLGA-PEG NPs manufactured by both conventional and microfluidic techniques using the nanoprecipitation principle. In vitro studies in brain endothelial hCMEC/D3 cells demonstrated that CFZ incorporation into the NPs was advantageous to reduce drug cytotoxicity. The TfR-binding peptide-functionalized NPs showed superior cell interaction and higher CFZ permeability across hCMEC/D3 cell monolayers compared to the non-functionalized NP control, thus indicating the efficacy of the functionalization strategy on providing CFZ transport through the BBB in vitro. The functionalized NPs demonstrate suitability for CFZ biological administration, suggested with low plasma protein binding, off-target biodistribution and precise delivery of CFZ towards the brain parenchyma.

Novel rivaroxaban-loaded poly(lactic-co-glycolic acid)/poloxamer nanoparticles: preparation, physicochemical characterization, in vitro evaluation of time-dependent anticoagulant activity and toxicological profile.

Rivaroxaban (RXB), an oral direct factor Xa inhibitor, presents innovative therapeutic profile. However, RXB has shown adverse effects, mainly due to pharmacokinetic limitations, highlighting the importance of developing more effective formulations. Therefore, this work aims at the preparation, physicochemical characterization and in vitro evaluation of time-dependent anticoagulant activity and toxicology profile of RXB-loaded poly(lactic-co-glycolic acid) (PLGA)/poloxamer nanoparticles (RXBNps). RXBNp were produced by nanoprecipitation method and physicochemical characteristics were evaluated. In vitro analysis of time-dependent anticoagulant activity was performed by prothrombin time test and toxicological profile was assessed by hemolysis and MTT reduction assays. The developed RXBNp present spherical morphology with average diameter of 205.5 ± 16.95 nm (PdI 0.096 ± 0.04), negative zeta potential (-26.28 ± 0.77 mV), entrapment efficiency of 91.35 ± 2.40%, yield of 41.81 ± 1.68% and 3.72 ± 0.07% of drug loading. Drug release was characterized by an initial fast release followed by a sustained release with 28.34 ± 2.82% of RXB available in 72 h. RXBNp showed an expressive time-dependent anticoagulant activity in human and rat blood plasma and non-toxic profile. Based on the results presented, it is possible to consider that RXBNp may be able to assist in the development of promising new therapies for treatment of thrombotic disorders.

Nanoparticles Loaded with a New Thiourea Derivative: Development and In vitro Evaluation Against Leishmania amazonensis.

BACKGROUND: Leishmaniasis is a neglected tropical disease caused by protozoa of the genus Leishmania. Current treatments are restricted to a small number of drugs that display both severe side effects and a potential for parasites to develop resistance. A new N-(3,4-methylenedioxyphenyl)-N'- (2-phenethyl) thiourea compound (thiourea 1) has shown promising in vitro activity against Leishmania amazonensis with an IC50 of 54.14 µM for promastigotes and an IC50 of 70 µM for amastigotes. OBJECTIVE: To develop a formulation of thiourea 1 as an oral treatment for leishmaniasis, it was incorporated into Nanoparticles (NPs), a proven approach to provide long-acting drug delivery systems. METHODS: Poly (D,L-Lactic-co-Glycolic Acid) (PLGA) polymeric NPs containing thiourea 1 were obtained through a nanoprecipitation methodology associated with solvent evaporation. The NPs containing thiourea 1 were characterized for Encapsulation Efficiency (EE%), reaction yield (% w/w), surface charge, particle size and morphology by Transmission Electron Microscopy (TEM). RESULTS: NPs with thiourea 1 showed an improved in vitro leishmanicidal activity with a reduction in its cytotoxicity against macrophages (CC50>100 µg/mL) while preserving its IC50 against intracellular amastigotes (1.46 ± 0.09 µg/mL). This represents a parasite Selectivity Index (SI) of 68.49, which is a marked advancement from the reference drug pentamidine (SI = 30.14). CONCLUSION: The results suggest that the incorporation into NPs potentiated the therapeutic effect of thiourea 1, most likely by improving the selective delivery of the drug to the phagocytic cells that are targeted for infection by L. amazonensis. This work reinforces the importance of nanotechnology in the acquisition of new therapeutic alternatives for oral treatments.

Vancomycin-loaded nanoparticles against vancomycin intermediate and methicillin resistant Staphylococcus aureus strains.

Bacterial infections represent one of the leading causes of mortality in the world. Among causative pathogens, S. aureus is prominently known as the underlying cause of many multidrug resistant infections that are often treated with the first-line choice antibiotic vancomycin (VCM). Loading antibiotics into polymeric nanoparticles (Np) displays promise as an alternative method to deliver therapy due to the greater access and accumulation of the antibiotic at the site of the infection as well as reducing toxicity, irritation and degradation. The aim of this work was to prepare, characterize and evaluate VCM-loaded nanoparticles (VNp) for use against S. aureus strains. Moreover, conjugation of Nps with holo-transferrin (h-Tf) was investigated as an approach for improving targeted drug delivery. VNp were prepared by double emulsion solvent evaporation method using PLGA and PVA or DMAB as surfactants. The particles were characterized for size distribution, Zeta Potential, morphology by transmission electron microscopy, encapsulation yield and protein conjugation efficiency. Process yield and drug loading were also investigated along with an in vitro evaluation of VNp antimicrobial effects against S. aureus strains. Results showed that Np were spontaneously formed with a mean diameter lower than 300 nm in a narrow size distribution that presented a spherical shape. The bioconjugation with h-Tf did not appear to increase the antimicrobial effect of VNp. However, non-bioconjugated Np presented a minimal inhibitory concentration lower than free VCM against a MRSA (Methicillin-resistant S. aureus) strain, and slightly higher against a VISA (VCM intermediate S. aureus) strain. VNp without h-Tf showed potential to assist in the development of new therapies against S. aureus infections.

Oral pentamidine-loaded poly(d,l-lactic-co-glycolic) acid nanoparticles: an alternative approach for leishmaniasis treatment.

Leishmaniasis is a group of diseases caused by a protozoa parasite from one of over 20 Leishmania species. Depending on the tissues infected, these diseases are classified as cutaneous, mucocutaneous and visceral leishmaniasis. For the treatment of leishmaniasis refractory to antimony-based drugs, pentamidine (PTM) is a molecule of great interest. However, PTM displays poor bioavailability through oral routes due to its two strongly basic amidine moieties, which restricts its administration by a parenteral route and limits its clinical use. Among various approaches, nanotechnology-based drug delivery systems (nano-DDS) have potential to overcome the challenges associated with PTM oral administration. Here, we present the development of PTM-loaded PLGA nanoparticles (NPs) with a focus on the characterization of their physicochemical properties and potential application as an oral treatment of leishmaniasis. NPs were prepared by a double emulsion methodology. The physicochemical properties were characterized through the mean particle size, polydispersity index (PdI), zeta potential, entrapment efficiency, yield process, drug loading, morphology, in vitro drug release and in vivo pharmacological activity. The PTM-loaded PLGA NPs presented with a size of 263 ± 5 nm (PdI = 0.17 ± 0.02), an almost neutral charge (-3.2 ± 0.8 mV) and an efficiency for PTM entrapment of 91.5%. The release profile, based on PTM dissolution, could be best described by a zero-order model, followed by a drug diffusion profile that fit to the Higuchi model. In addition, in vivo assay showed the efficacy of orally given PTM-loaded PLGA NPs (0.4 mg kg-1) in infected BALB/c mice, with significant reduction of organ weight and parasite load in spleen (p-value < 0.05). This work successfully reported the oral use of PTM-loaded NPs, with a high potential for the treatment of visceral leishmaniasis, opening a new perspective to utilization of this drug in clinical practice.

Development and Characterization of Dapsone Cocrystal Prepared by Scalable Production Methods.

In this study, the formation of caffeine/dapsone (CAF/DAP) cocrystals by scalable production methods, such as liquid-assisted grinding (LAG) and spray drying, was investigated in the context of the potential use of processed cocrystal powder for pulmonary delivery. A CAF/DAP cocrystal (1:1 M ratio) was successfully prepared by slow evaporation from both acetone and ethyl acetate. Acetone, ethyl acetate, and ethanol were all successfully used to prepare cocrystals by LAG and spray drying. The powders obtained were characterized by X-ray diffractometry (XRD), differential scanning calorimetry (DSC), thermogravimetry (TGA), and Fourier transform infrared spectroscopy (FTIR). Laser diffraction analysis indicated a median particle size (D50) for spray-dried powders prepared from acetone, ethanol, and ethyl acetate of 5.4 ± 0.7, 5.2 ± 0.1, and 5.1 ± 0.0 µm respectively, which are appropriate sizes for pulmonary delivery by means of a dry powder inhaler. The solubility of the CAF/DAP cocrystal in phosphate buffer pH 7.4, prepared by spray drying using acetone, was 506.5 ± 31.5 µg/mL, while pure crystalline DAP had a measured solubility of 217.1 ± 7.8 µg/mL. In vitro cytotoxicity studies using Calu-3 cells indicated that the cocrystals were not toxic at concentrations of 0.1 and of 1 mM of DAP, while an in vitro permeability study suggested caffeine may contribute to the permeation of DAP by hindering the efflux effect. The results obtained indicate that the CAF/DAP cocrystal, particularly when prepared by the spray drying method, represents a possible suitable approach for inhalation formulations with applications in pulmonary pathologies.

A promising oral fucoidan-based antithrombotic nanosystem: Development, activity and safety.

Fucoidan-loaded nanoparticles emerge as great candidates to oral anticoagulant therapy, due to increasing of bioavailability and circulation time of this natural anticoagulant. Crosslink between chitosan chains are performed using glutaraldehyde to confer higher gastric pH resistance to nanoparticle matrices. In this work, chitosan-fucoidan nanoparticles, without (NpCF) and with glutaraldehyde crosslink (NpCF 1% and NpCF 2%), were prepared to evaluate their anticoagulant, antithrombotic and hemorrhagic profile. Nanoparticles were characterized by average diameter, polydispersity index, zeta potential, Fourier transform infrared spectroscopy and fucoidan in vitro release. Anticoagulant and antithrombotic activities were determined by in vitro and in vivo models, respectively. Hemorrhagic profile was in vivo evaluated by tail bleeding assay. Preparations showed nanometric and homogeneous average diameters. Zeta potentials of NpCF and NpCF 1% were stable over gastrointestinal pH range, which was confirmed by low fucoidan release in gastric and enteric media. In pH 7.4, NpCF and NpCF 1% demonstrated fucoidan release of 65.5% and 60.6%, respectively, within the first 24 hours. In comparison to fucoidan, NpCF and NpCF 1% showed increased in vitro anticoagulant activity. A significant difference on oral antithrombotic profile of NpCF 1% was found in comparison to fucoidan. Bleeding profile of NpCF and NpCF 1% showed no differences to control group, indicating the safety of these systems. Surprisingly, oral antithrombotic profile of commercially available fucoidan, from Fucus vesiculosus, has not been previously determined, which reveals new possibilities. In this work, significant advances were observed in anticoagulant and antithrombotic profiles of fucoidan through the preparation of NpCF 1%.

Development and validation of a dissolution test for lutein tablets and evaluation of intestinal permeability.

Lutein is a carotenoid with antioxidant activity that is present in various dosage forms. The bioavailability of carotenoid from oral dosage formulations depends on their release, dissolution and its permeability through the gastrointestinal tract. Here, a dissolution test was developed for evaluating formulations and the bioavailability was assessed. The test utilized a USP-apparatus II with rotations of 50, 75 and 100rpm in water with P80 at 1, 2 and 5% (w/v). A non-everted rat intestinal sac model was used in conjunction to assess the intestinal permeability. The most discriminative conditions were 100rpm in water with 2% polysorbate 80, which showed profile differences between two formulations. The intestinal permeation studies showed a lag-time and apparent permeability coefficient that were characteristic of highly permeable drugs. We suggest that a dissolution test can be an essential quality control tool for formulations containing compounds as lutein, although not mandatory by the regulation agencies.

Development and Characterization of Nisin Nanoparticles as Potential Alternative for the Recurrent Vaginal Candidiasis Treatment.

The aim of this work was the development and characterization of nisin-loaded nanoparticles and the evaluation of its potential antifungal activity. Candidiasis is a fungal infection caused by Candida sp. considered as one of the major public health problem currently. The discovery of antifungal agents that present a reduced or null resistance of Candida sp. and the development of more efficient drug release mechanisms are necessary for the improvement of candidiasis treatment. Nisin, a bacteriocin commercially available for more than 50 years, exhibits antibacterial action in food products with potential antifungal activity. Among several alternatives used to modulate antifungal activity of bacteriocins, polymeric nanoparticles have received great attention due to an effective drug release control and reduction of therapeutic dose, besides the minimization of adverse effects by the preferential accumulation in specific tissues. The nisin nanoparticles were prepared by double emulsification and solvent evaporation methods. Nanoparticles were characterized by dynamic light scattering, zeta potential, Fourier transform infrared, X-ray diffraction, differential scanning calorimetry, and scanning electron microscopy. Antifungal activity was accessed by pour plate method and cell counting using Candida albicans strains. The in vitro release profile and in vitro permeation studies were performed using dialysis bag method and pig vaginal mucosa in Franz diffusion cell, respectively. The results revealed nisin nanoparticles (300 nm) with spherical shape and high loading efficiency (93.88 ± 3.26%). In vitro test results suggest a promising application of these nanosystems as a prophylactic agent in recurrent vulvovaginal candidiasis and other gynecological diseases.

Crystalline forms of nonprotein drugs filed in Brazil from 1995-2005.

In the present study, we evaluated 457 patent applications filed for crystalline forms of nonprotein drugs during the period 1995-2005 in Brazil. Online searches were conducted using the Instituto Nacional da Propriedade Industrial patent database and the Derwent Innovations Index(®). It was found that no patent applications in this area were filed by Brazilian applicants. It was also noted that only 61% of patent applications included the characterization of three or more crystalline phase techniques. In most applications, no determination of purity was provided for chemical and/or crystalline phases. In a subset of patent applications, those for blockbuster drugs, we found that approximately 90% did not meet Instituto Nacional da Propriedade Industrial acceptance criteria nor the criteria developed in this study. These results reveal that appropriate and thorough characterization of the crystalline forms of drugs is, indeed, lacking in patent applications.

Development of a doxazosin and finasteride transdermal system for combination therapy of benign prostatic hyperplasia.

The treatment of benign prostatic hyperplasia can be accomplished by the use of different drugs including, doxazosin, an α-1 adrenergic antagonist, and finasteride (FIN), a 5-α reductase inhibitor. Traditionally, treatments using these drugs have been administered as either a mono or combination therapy by the oral route. A transdermal delivery system optimized for doxazosin and FIN combination therapy would provide increased patient adherence and facilitate dose adjustment. Doxazosin base (DB) was prepared from doxazosin mesylate and characterized together with FIN, by X-ray powder diffraction (XRD), differential scanning calorimetry (DSC), and nuclear magnetic resonance (NMR). The permeation enhancers, azone and lauric acid, and the gelling agents, hydroxypropyl cellulose (HPC) and Poloxamer 407 (P407), were evaluated to determine their ability to promote in vitro permeation of drugs through the pig ear epidermis. Successful preparation of DB was confirmed by evaluating the XRD, DSC, and NMR patterns and in vitro studies revealed that 3% (w/w) azone was the best permeation enhancer. When P407 gel was compared with HPC gel, it showed reduced lag time and promoted higher permeation of both drugs. This may be because of the interactions of the former with the stratum corneum, which disorganizes the lipid structure and consequently promotes higher drug permeation.

Preparation and evaluation of lidocaine hydrochloride in cyclodextrin inclusion complexes for development of stable gel in association with chlorhexidine gluconate for urogenital use.

Inclusions of lidocaine hydrochloride in cyclodextrins were prepared to obtain stable complexes compatible for association with chlorhexidine in a new gel formulation for use in urogenital applications. Two cyclodextrins, ß-cyclodextrin and methyl-ß-cyclodextrin, were used for encapsulating lidocaine hydrochloride through solubilization and kneading techniques. The lidocaine-cyclodextrin complexes were characterized by ultraviolet spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction. The results revealed that the techniques generated good yields of inclusion products that maintained the functional properties of lidocaine. In addition, the inclusion products obtained improved the compatibility of lidocaine hydrochloride with chlorhexidine in solution and a gel formulation. The gel formulation displayed desirable rheological and physicochemical properties. The results presented here are the first description of the inclusion of lidocaine with cyclodextrins, which improves compatibility with chlorhexidine in formulations for simultaneous delivery.