Understanding and predicting the performance of passive heat and moisture exchangers using a numerical model.

BACKGROUND: To improve the understanding of the thermodynamics and performance of small passive hygroscopic Heat and Moisture Exchangers (HMEs), a computer model simulating HME function is required. METHODS: We developed a numerical HME model to calculate the HME's water and heat exchange. The model was tuned and verified with experimental data and validated by applying it to HME design variations. RESULTS: Verification of the model's results to the experimental data shows that the tuned model yields reliable results. The mass of the core, which determines the HME's total heat capacity, is the most important parameter influencing the performance of passive HMEs. CONCLUSIONS: Increasing the HME's diameter is an effective way to improve an HME, as it yields higher performance and lowers breathing resistance. HMEs intended for use in warm or dry climates should contain more and those for use in cold humid climates should contain less hygroscopic salt.

Development and clinical applicability of MRI-based 3D prostate models in the planning of nerve-sparing robot-assisted radical prostatectomy.

The interpretation of conventional MRI may be limited by the two-dimensional presentation of the images. To develop patient-specific MRI prostate-based virtual and three-dimensional (3D)-printed models. To assess the association between 3D imaging and the pathological outcome of RARP specimen. To assess the clinical applicability of 3D models to guide nerve-sparing robot-assisted radical prostatectomy (RARP). We created virtual 3D and 3D-printed 3D models of 20 prostate cancer patients retrospectively. A comparison was made between conventional MRI and 3D-reconstructed images. The concordance between tumour lesion location in 3D models and pathology reporting of RARP specimens was assessed. Seven urologists assessed the side-specific extent of nerve-sparing based on (1) conventional MR images, (2) virtual 3D models, and (3) 3D-printed models. Clinically relevant changes in nerve-sparing and the absolute agreement between observers was analyzed using the Chi-square test and intra-class correlation coefficient (ICC). The index lesion was correctly visualized in 19/20 (95%) 3D models and the expected location of extraprostatic extension was correctly visualized in all 3D models. Clinically relevant changes in the planned extent of nerve-sparing between MRI and virtual 3D models and MRI and 3D-printed models were found in 25% and 26%. The ICC of the planned extent of nerve-sparing between urologists was 0.40 (95% CI 0.28-0.55) for conventional MRI, 0.52 (95% CI 0.39-0.66) for virtual 3D models and 0.58 (95% CI 0.45-0.71) for 3D-printed models. 3D models of the MRI prostate to guide RARP could aid urologists in the planning of nerve-sparing surgery as shown by a higher inter-observer agreement.

3D-Reconstructed Contact Surface Area and Tumour Volume on Magnetic Resonance Imaging Improve the Prediction of Extraprostatic Extension of Prostate Cancer.

This study is to determine whether the volume and contact surface area (CSA) of a tumour with an adjacent prostate capsule on MRI in a three-dimensional (3D) model that can predict side-specific extraprostatic extension (EPE) at radical prostatectomy (RP). Patients with localised prostate cancer (PCa) who underwent robot-assisted RP between July 2015 and March 2021 were included in this retrospective study. MRI-based 3D prostate models incorporating the PCa volume and location were reconstructed. The tumour volume and surface variables were extracted. For the prostate-to-tumour and tumour-to-prostate CSAs, the areas in which the distances were ≤ 1, ≤ 2, ≤ 3, ≤ 4, and ≤ 5 mm were defined, and their surface (cm2) were determined. Differences in prostate sides with and without pathological EPE were analysed. Multivariable logistic regression analysis to find independent predictors of EPE. Overall, 75/302 (25%) prostate sides showed pathological EPE. Prostate sides with EPE had higher cT-stage, higher PSA density, higher percentage of positive biopsy cores, higher biopsy Gleason scores, higher radiological tumour stage, larger tumour volumes, larger prostate CSA, and larger tumour CSA (all p < 0.001). Multivariable logistic regression analysis showed that the radiological tumour stage (p = 0.001), tumour volume (p < 0.001), prostate CSA (p < 0.001), and tumour CSA (p ≤ 0.001) were independent predictors of pathological EPE. A 3D reconstruction of tumour locations in the prostate improves prediction of extraprostatic extension. Tumours with a higher 3D-reconstructed volume, a higher surface area of tumour in contact with the prostate capsule, and higher surface area of prostate capsule in contact with the tumour are at increased risk of side-specific extraprostatic extension.

Adjustable breathing resistance for laryngectomized patients: Proof of principle in a novel heat and moisture exchanger cassette.

BACKGROUND: Due to the heat and moisture exchanger's (HME) breathing resistance, laryngectomized patients cannot always use an (optimal) HME during physical exercise. We propose a novel HME cassette concept with adjustable "bypass," to provide adjustment between different breathing resistances within one device. METHODS: Under standardized conditions, the resistance and humidification performance of a high resistance/high humidification HME (XM) foam in a cassette with and without bypass were compared to a lower resistance/lesser humidification HME (XF) foam in a closed cassette. RESULTS: With a bypass in the cassette, the resistance and humidification performance of XM foam were similar to those of XF foam in the closed cassette. Compared to XM foam in the closed cassette, introducing the bypass resulted in a 40% resistance decrease, whereas humidification performance was maintained at 80% of the original value. CONCLUSIONS: This HME cassette prototype allows adjustment between substantially different resistances while maintaining appropriate humidification performances.

Improving Hands-free Speech Rehabilitation in Patients With a Laryngectomy: Proof-of-Concept of an Intratracheal Fixation Device.

Permanent hands-free speech with the use of an automatic speaking valve (ASV) is regarded as the optimal voice rehabilitation after total laryngectomy. Due to fixation problems, regular ASV use in patients with a laryngectomy is limited. We have developed an intratracheal fixation device (ITFD) composed of an intratracheal button augmented by hydrophilic foam around its shaft. This study evaluates the short-term effectiveness and experienced comfort of this ITFD during hands-free speech in 7 participants with a laryngectomy. We found that 4 of 7 participants had secure ASV fixation inside the tracheostoma during hands-free speech for at least 30 minutes with the ITFD. The ITFD's comfort was perceived positively overall. The insertion was perceived as being mildly uncomfortable but not painful. This proof-of-concept study demonstrates the feasibility of the ITFD that might improve stomal attachment of ASVs, and it provides the basis for further development toward a prototype suitable for long-term daily use.

MRI Assessment of Swallow Muscle Activation with the Swallow Exercise Aid and with Conventional Exercises in Healthy Volunteers: An Explorative Biomechanical Study.

Swallowing muscle strength exercises are effective in restoring swallowing function. In order to perform the exercises with progressive load, the swallow exercise aid (SEA) was developed. Precise knowledge on which muscles are activated with swallowing exercises, especially with the SEA, is lacking. This knowledge would aid in optimizing the training program to target the relevant swallowing muscles, if necessary. Three healthy volunteers performed the three SEA exercises (chin tuck against resistance, jaw opening against resistance and effortful swallow) and three conventional exercises [conventional effortful swallow (cES), Shaker and Masako] in supine position inside an MRI scanner. Fast muscle functional MRI scans (generating quantitative T2-maps) were made immediately before and after the exercises. Median T2 values at rest and after exercise were compared to identify activated muscles. After the three SEA exercises, the suprahyoid, infrahyoid, sternocleidomastoid, and lateral pterygoid muscles showed significant T2 value increase. After the Shaker, the lateral pterygoid muscles did not show such an increase, but the three other muscle groups did. The cES and Masako caused no significant increase in any of these muscle groups. During conventional (Shaker) exercises, the suprahyoid, infrahyoid, and sternocleidomastoid muscles are activated. During the SEA exercises, the suprahyoid, infrahyoid, sternocleidomastoid, and lateral pterygoid muscles are activated. The findings of this explorative study further support the potential of the SEA to improve swallowing rehabilitation.

Five Specific Tongue Movements in a Healthy Population.

The importance of tongue mobility on speech, oral food transport, and swallowing is well recognized. However, whether the individual tongue mobility influences postoperative function in oral cancer treatment remains to be elucidated. This study assesses the ability to perform five tongue movements as rolling, twisting (two sides), folding, and the 'cloverleaf' in a healthy population. Because a tumor in oral cancer patients often restricts the mobility of the tongue, it might be helpful to know if it is possible to recall any of those movements without demonstrating it. Two observers asked 387 Dutch healthy adults if they could perform one of the five specific tongue movements and were subsequently asked to demonstrate the five movements. The distribution in the Dutch population is: rolling: 83.7%, cloverleaf: 14.7%, folding: 27.5%, twisting left: 36.1% and twisting right: 35.6%. The percentage of people that can fold their tongue is almost ten times higher (3% versus 27.5%) than in previous research, and it was found that the ability to roll the tongue is not a prerequisite for folding of the tongue. A relationship between gender or right-handedness and the ability to perform certain tongue movements could not be found. Of the participants, 9.9% and 13.1% incorrectly assumed that they could demonstrate tongue rolling and cloverleaf. Tongue folding and twisting (left or right) were incorrectly assumed in 36.9%, 24.1%, and 25.4% of the cases. Rolling and cloverleaf are preferred for future prediction models because these movements are easy to recall without demonstrating.

On the Development of a Light Dosimetry Planning Tool for Photodynamic Therapy in Arbitrary Shaped Cavities: Initial Results.

Previous dosimetric studies during photodynamic therapy (PDT) of superficial lesions within a cavity such as the nasopharynx, demonstrated significant intra- and interpatient variations in fluence rate build-up as a result of tissue surface re-emitted and reflected photons, which depends on the optical properties. This scattering effect affects the response to PDT. Recently, a meta-tetra(hydroxyphenyl)chlorin-mediated PDT study of malignancies in the paranasal sinuses after salvage surgery was initiated. These geometries are complex in shape, with spatially varying optical properties. Therefore, preplanning and in vivo dosimetry is required to ensure an effective fluence delivered to the tumor. For this purpose, two 3D light distribution models were developed: first, a simple empirical model that directly calculates the fluence rate at the cavity surface using a simple linear function that includes the scatter contribution as function of the light source to surface distance. And second, an analytical model based on Lambert's cosine law assuming a global diffuse reflectance constant. The models were evaluated by means of three 3D printed optical phantoms and one porcine tissue phantom. Predictive fluence rate distributions of both models are within ± 20% accurate and have the potential to determine the optimal source location and light source output power settings.

Simulation of facial expressions using person-specific sEMG signals controlling a biomechanical face model.

PURPOSE: Functional inoperability in advanced oral cancer is difficult to assess preoperatively. To assess functions of lips and tongue, biomechanical models are required. Apart from adjusting generic models to individual anatomy, muscle activation patterns (MAPs) driving patient-specific functional movements are necessary to predict remaining functional outcome. We aim to evaluate how volunteer-specific MAPs derived from surface electromyographic (sEMG) signals control a biomechanical face model. METHODS: Muscle activity of seven facial muscles in six volunteers was measured bilaterally with sEMG. A triple camera set-up recorded 3D lip movement. The generic face model in ArtiSynth was adapted to our needs. We controlled the model using the volunteer-specific MAPs. Three activation strategies were tested: activating all muscles [Formula: see text], selecting the three muscles showing highest muscle activity bilaterally [Formula: see text]-this was calculated by taking the mean of left and right muscles and then selecting the three with highest variance-and activating the muscles considered most relevant per instruction [Formula: see text], bilaterally. The model's lip movement was compared to the actual lip movement performed by the volunteers, using 3D correlation coefficients [Formula: see text]. RESULTS: The correlation coefficient between simulations and measurements with [Formula: see text] resulted in a median [Formula: see text] of 0.77. [Formula: see text] had a median [Formula: see text] of 0.78, whereas with [Formula: see text] the median [Formula: see text] decreased to 0.45. CONCLUSION: We demonstrated that MAPs derived from noninvasive sEMG measurements can control movement of the lips in a generic finite element face model with a median [Formula: see text] of 0.78. Ultimately, this is important to show the patient-specific residual movement using the patient's own MAPs. When the required treatment tools and personalisation techniques for geometry and anatomy become available, this may enable surgeons to test the functional results of wedge excisions for lip cancer in a virtual environment and to weigh surgery versus organ-sparing radiotherapy or photodynamic therapy.

sEMG-assisted inverse modelling of 3D lip movement: a feasibility study towards person-specific modelling.

We propose a surface-electromyographic (sEMG) assisted inverse-modelling (IM) approach for a biomechanical model of the face to obtain realistic person-specific muscle activations (MA) by tracking movements as well as innervation trajectories. We obtained sEMG data of facial muscles and 3D positions of lip markers in six volunteers and, using a generic finite element (FE) face model in ArtiSynth, performed inverse static optimisation with and without sEMG tracking on both simulation data and experimental data. IM with simulated data and experimental data without sEMG data showed good correlations of tracked positions (0.93 and 0.67) and poor correlations of MA (0.27 and 0.20). When utilising the sEMG-assisted IM approach, MA correlations increased drastically (0.83 and 0.59) without sacrificing performance in position correlations (0.92 and 0.70). RMS errors show similar trends with an error of 0.15 in MA and of 1.10 mm in position. Therefore, we conclude that we were able to demonstrate the feasibility of an sEMG-assisted inverse modelling algorithm for the perioral region. This approach may help to solve the ambiguity problem in inverse modelling and may be useful, for instance, in future applications for preoperatively predicting treatment-related function loss.

Analysis of tracheostoma morphology.

OBJECTIVES: Existing fixation methods of automatic speaking valves (ASVs) suffer from shortcomings which partly are the result of insufficient conformity of the intratracheal fixation method's shape to the tracheostoma anatomy. However, quantitative data are lacking and will be helpful to analyse solutions for airtight fixation. This article provides such data. PATIENTS AND METHODS: The tracheostoma morphology was measured in computerized tomography scans of 20 laryngectomized patients. Measured were transverse and sagittal diameters, transition angle between skin level and tracheostoma lumen and between the tracheostoma lumen to the trachea, TE valve placement and stoma depth. RESULTS: The mean transverse and sagittal diameters of the stoma at the peristomal lip are 19.2 mm [standard deviation (SD 5.2 mm)] and 17.6 mm (SD 5.3 mm), respectively. The mean transition angles are 84.5° (SD 15.6°) at skin level and 153.6° (SD 11.7°) into the trachea. The mean distance between TE valve and peristomal lip is 13.5 mm (SD 7.0 mm). The mean stoma depth is 14.0 mm (SD 6.4 mm). CONCLUSIONS: Due to the large variation, no 'average tracheostoma morphology', suitable for shaping a generic intratracheal fixation device, can be defined. Therefore, providing an airtight fixation in each patient would require a large range of different sizes, customization or a new approach.

Predicting 3D lip shapes using facial surface EMG.

AIM: The aim of this study is to prove that facial surface electromyography (sEMG) conveys sufficient information to predict 3D lip shapes. High sEMG predictive accuracy implies we could train a neural control model for activation of biomechanical models by simultaneously recording sEMG signals and their associated motions. MATERIALS AND METHODS: With a stereo camera set-up, we recorded 3D lip shapes and simultaneously performed sEMG measurements of the facial muscles, applying principal component analysis (PCA) and a modified general regression neural network (GRNN) to link the sEMG measurements to 3D lip shapes. To test reproducibility, we conducted our experiment on five volunteers, evaluating several sEMG features and window lengths in unipolar and bipolar configurations in search of the optimal settings for facial sEMG. CONCLUSIONS: The errors of the two methods were comparable. We managed to predict 3D lip shapes with a mean accuracy of 2.76 mm when using the PCA method and 2.78 mm when using modified GRNN. Whereas performance improved with shorter window lengths, feature type and configuration had little influence.

Predicting 3D lip movement using facial sEMG: a first step towards estimating functional and aesthetic outcome of oral cancer surgery.

In oral cancer, loss of function due to surgery can be unacceptable, designating the tumour as functionally inoperable. Other curative treatments can then be considered. Currently, predictions of these functional consequences are subjective and unreliable. We want to create patient-specific models to improve and objectify these predictions. A first step was taken by controlling a 3D lip model with volunteer-specific sEMG activities. We focus on the lips first, because they are essential for speech, oral food transport, and facial mimicry. Besides, they are more accessible to measurements than intraoral organs. 3D lip movement and corresponding sEMG activities are measured in five healthy volunteers, who performed 19 instructions repeatedly, to create a quantitative lip model by establishing the relationship between sEMG activities of eight facial muscles bilaterally on the input side and the corresponding 3D lip displacements on the output side. The relationship between 3D lip movement and sEMG activities was accommodated in a state-space model. A good relationship between sEMG activities and 3D lip movement was established with an average root mean square error of 2.43 mm for the first-order system and 2.46 mm for the second-order system. This information can be incorporated into biomechanical models to further personalise functional outcome assessment after treatment.

A New Accurate 3D Measurement Tool to Assess the Range of Motion of the Tongue in Oral Cancer Patients: A Standardized Model.

In oral cancer treatment, function loss such as speech and swallowing deterioration can be severe, mostly due to reduced lingual mobility. Until now, there is no standardized measurement tool for tongue mobility and pre-operative prediction of function loss is based on expert opinion instead of evidence based insight. The purpose of this study was to assess the reliability of a triple-camera setup for the measurement of tongue range of motion (ROM) in healthy adults and its feasibility in patients with partial glossectomy. A triple-camera setup was used, and 3D coordinates of the tongue in five standardized tongue positions were achieved in 15 healthy volunteers. Maximum distances between the tip of the tongue and the maxillary midline were calculated. Each participant was recorded twice, and each movie was analysed three times by two separate raters. Intrarater, interrater and test-retest reliability were the main outcome measures. Secondly, feasibility of the method was tested in ten patients treated for oral tongue carcinoma. Intrarater, interrater and test-retest reliability all showed high correlation coefficients of >0.9 in both study groups. All healthy subjects showed perfect symmetrical tongue ROM. In patients, significant differences in lateral tongue movements were found, due to restricted tongue mobility after surgery. This triple-camera setup is a reliable measurement tool to assess three-dimensional information of tongue ROM. It constitutes an accurate tool for objective grading of reduced tongue mobility after partial glossectomy.