Dimethyl carbonate synthesis from CO2 and methanol over CeO2: elucidating the surface intermediates and oxygen vacancy-assisted reaction mechanism.

Surface intermediate species and oxygen vacancy-assisted mechanism over CeO2 catalyst in the direct dimethyl carbonate (DMC) synthesis from carbon dioxide and methanol are suggested by means of transient spectroscopic methodologies in conjunction with multivariate spectral analysis. How the two reactants, i.e. CO2 and methanol, interact with the CeO2 surface and how they form decisive surface intermediates leading to DMC are unraveled by DFT-based molecular dynamics simulation by precise statistical sampling of various configurations of surface states and intermediates. The atomistic simulations and uncovered stability of different intermediate states perfectly explain the unique DMC formation profile experimentally observed upon transient operations, strongly supporting the proposed oxygen vacancy-assisted reaction mechanism.

The more the better: on the formation of single-phase high entropy alloy nanoparticles as catalysts for the oxygen reduction reaction.

High entropy alloys (HEAs) are an important new material class with significant application potential in catalysis and electrocatalysis. The entropy-driven formation of HEA materials requires high temperatures and controlled cooling rates. However, catalysts in general also require highly dispersed materials, i.e., nanoparticles. Only then a favorable utilization of the expensive raw materials can be achieved. Several recently reported HEA nanoparticle synthesis strategies, therefore, avoid the high-temperature regime to prevent particle growth. In our work, we investigate a system of five noble metal single-source precursors with superior catalytic activity for the oxygen reduction reaction. Combining in situ X-ray powder diffraction with multi-edge X-ray absorption spectroscopy, we address the fundamental question of how single-phase HEA nanoparticles can form at low temperatures. It is demonstrated that the formation of HEA nanoparticles is governed by stochastic principles and the inhibition of precursor mobility during the formation process favors the formation of a single phase. The proposed formation principle is supported by simulations of the nanoparticle formation in a randomized process, rationalizing the experimentally found differences between two-element and multi-element metal precursor mixtures.

Pyrochlore-Type Iron Hydroxy Fluorides as Low-Cost Lithium-Ion Cathode Materials for Stationary Energy Storage.

Pyrochlore-type iron (III) hydroxy fluorides (Pyr-IHF) are appealing low-cost stationary energy storage materials due to the virtually unlimited supply of their constituent elements, their high energy densities, and fast Li-ion diffusion. However, the prohibitively high costs of synthesis and cathode architecture currently prevent their commercial use in low-cost Li-ion batteries. Herein, a facile and cost-effective dissolution-precipitation synthesis of Pyr-IHF from soluble iron (III) fluoride precursors is presented. High capacity retention by synthesized Pyr-IHF of >80% after 600 cycles at a high current density of 1 A g-1 is obtained, without elaborate electrode engineering. Operando synchrotron X-ray diffraction guides the selective synthesis of Pyr-IHF such that different water contents can be tested for their effect on the rate capability. Li-ion diffusion is found to occur in the 3D hexagonal channels of Pyr-IHF, formed by corner-sharing FeF6-x (OH)x octahedra.

A new high temperature, high heating rate, low axial gradient capillary heater.

A new heater design, capable of fast heating and cooling to and from >1000°C, has been developed at the Swiss-Norwegian Beamlines, European Synchrotron Radiation Facility, France. The design uses a SiC head to distribute heat, and resistive Si3N4 heat cartridges to provide heat.

On the resolution function for powder diffraction with area detectors.

In a powder diffraction experiment the resolution function defines the instrumental contribution to the peak widths as a function of the Bragg angle. The Caglioti formula is frequently applied to model the instrumental broadening and used in structural refinement. The parameters in the Caglioti formula are linked to physically meaningful parameters for most diffraction geometries. However, this link is lost for the now very popular powder diffraction geometry using large 2D area detectors. Here we suggest a new physical model for the instrumental broadening specifically developed for powder diffraction data measured with large 2D area detectors. The model is verified using data from two synchrotron diffraction beamlines with the Pilatus2M and MAR345 detectors. Finally, a functional form is proposed to replace the Caglioti formula for this geometry in the Rietveld method and profile refinements.

Understanding the Hydrothermal Formation of NaNbO3: Its Full Reaction Scheme and Kinetics.

Sodium niobate (NaNbO3) attracts attention for its great potential in a variety of applications, for instance, due to its unique optical properties. Still, optimization of its synthetic procedures is hard due to the lack of understanding of the formation mechanism under hydrothermal conditions. Through in situ X-ray diffraction, hydrothermal synthesis of NaNbO3 was observed in real time, enabling the investigation of the reaction kinetics and mechanisms with respect to temperature and NaOH concentration and the resulting effect on the product crystallite size and structure. Several intermediate phases were observed, and the relationship between them, depending on temperature, time, and NaOH concentration, was established. The reaction mechanism involved a gradual change of the local structure of the solid Nb2O5 precursor upon suspending it in NaOH solutions. Heating gave a full transformation of the precursor to HNa7Nb6O19·15H2O, which destabilized before new polyoxoniobates appeared, whose structure depended on the NaOH concentration. Following these polyoxoniobates, Na2Nb2O6·H2O formed, which dehydrated at temperatures ≥285 °C, before converting to the final phase, NaNbO3. The total reaction rate increased with decreasing NaOH concentration and increasing temperature. Two distinctly different growth regimes for NaNbO3 were observed, depending on the observed phase evolution, for temperatures below and above ≈285 °C. Below this temperature, the growth of NaNbO3 was independent of the reaction temperature and the NaOH concentration, while for temperatures ≥285 °C, the temperature-dependent crystallite size showed the characteristics of a typical dissolution-precipitation mechanism.

A Fast, Low-Temperature Synthesis Method for Hexagonal YMnO3 : Kinetics, Purity, Size and Shape as Studied by In Situ X-ray Diffraction.

The reaction mechanisms, phase development and kinetics of the hydrothermal synthesis of hexagonal-YMnO3 from Y2 O3 and Mn2 O3 using in situ X-ray diffraction are reported under different reaction conditions with temperatures ranging from 300 to 350 °C, and using 1, 5 and 10 m KOH, and 5 m NaOH mineraliser. Reactions initiated with Y2 O3 hydrating to Y(OH)3 , which then dehydrated to YO(OH). Higher temperatures and KOH concentrations led to faster, more complete dehydrations. However, 1 m KOH led to YO(OH) forming concurrently with Y(OH)3 before Y(OH)3 fully dehydrated but yielded a very low phase purity of hexagonal-YMnO3 . Using NaOH mineraliser, no YO(OH) was observed. Dehydration also initiated at a higher temperature in the absence of Mn2 O3 . The evolution of Rietveld refined scale factors was used to determine kinetic information and approximate activation energies for the reaction. The described hydrothermal synthesis offers a fast, low-temperature method for producing anisometric h-YMnO3 particles.

Unwanted effects of X-rays in surface grafted copper(ii) organometallics and copper exchanged zeolites, how they manifest, and what can be done about them.

Copper(ii) containing materials are widely studied for a very diverse array of applications from biology, through catalysis, to many other materials chemistry based applications. We show that, for grafted copper compounds at the surface of silica, and for the study of the selective conversion of methane to methanol using copper ion-exchanged zeolites, the application of focused X-ray beams for spectroscopic investigations is subject to significant challenges. We demonstrate how unwanted effects due to the X-rays manifest, which can prevent the study of certain types of reactive systems, and/or lead to the derivation of results that are not at all representative of the behavior of the materials in question. With reference to identical studies conducted at a beamline that does not focus its X-rays, we then delineate how the total photon throughput and the brilliance of the applied X-rays affect the apparent behavior of copper in zeolites during the stepwise, high temperature and aerobic activation approach to the selective conversion of methane to methanol. We show that the use of increasingly brilliant X-ray sources for X-ray spectroscopy can bring with it significant caveats to obtaining valid and quantitative structure-reactivity relationships (QSARS) and kinetics for this class of material. Lastly, through a systematic study of these effects, we suggest ways to ensure that valuable allocations of X-ray beam time result in measurements that reflect the real nature of the chemistry under study and not that due to other, extraneous, factors.

Insights into Reaction Intermediates to Predict Synthetic Pathways for Shape-Controlled Metal Nanocrystals.

Understanding nucleation phenomena is crucial across all branches of physical and natural sciences. Colloidal nanocrystals are among the most versatile and tunable synthetic nanomaterials. While huge steps have been made in their synthetic development, synthesis by design is still impeded by the lack of knowledge of reaction mechanisms. Here, we report on the investigation of the reaction intermediates in high temperature syntheses of copper nanocrystals by a variety of techniques, including X-ray absorption at a synchrotron source using a customized in situ cell. We reveal unique insights into the chemical nature of the reaction intermediates and into their role in determining the final shape of the metal nanocrystals. Overall, this study highlights the importance of understanding the chemistry behind nucleation as a key parameter to predict synthetic pathways for shape-controlled nanocrystals.

CO2 adsorption in Y zeolite: a structural and dynamic view by a novel principal-component-analysis-assisted in situ single-crystal X-ray diffraction experiment.

The increasing efficiency of detectors and brightness of X-rays in both laboratory and large-scale facilities allow the collection of full single-crystal X-ray data sets within minutes. The analysis of these `crystallographic big data' requires new tools and approaches. To answer these needs, the use of principal component analysis (PCA) is proposed to improve the efficiency and speed of the analysis. Potentialities and limitations of PCA were investigated using single-crystal X-ray diffraction (XRD) data collected in situ on Y zeolite, in which CO2, acting as an active species, is thermally adsorbed while cooling from 300 to 200 K. For the first time, thanks to the high sensitivity of single-crystal XRD, it was possible to determine the sites where CO2 is adsorbed, the increase in their occupancy while the temperature is decreased, and the correlated motion of active species, i.e. CO2, H2O and Na+. PCA allowed identification and elimination of problematic data sets, and better understanding of the trends of the occupancies of CO2, Na+ and water. The quality of the data allowed for the first time calculation of the enthalpy (ΔH) and entropy (ΔS) of the CO2 adsorption by applying the van 't Hoff equation to in situ single-crystal data. The calculation of thermodynamic values was carried out by both traditional and PCA-based approaches, producing comparable results. The obtained ΔH value is significant and involves systems (CO2 and Y zeolite) with no toxicity, superb stability and chemical inertness. Such features, coupled with the absence of carbonate formation and framework inertness upon adsorption, were demonstrated for the bulk crystal by the single-crystal experiment, and suggest that the phenomenon can be easily reversed for a large number of cycles, with CO2 released on demand. The main advantages of PCA-assisted analysis reside in its speed and in the possibility of it being applied directly to raw data, possibly as an `online' data-quality test during data collection, without any a priori knowledge of the crystal structure.

High-resolution crystal structures reveal a mixture of conformers of the Gly61-Asp62 peptide bond in an oxidized flavodoxin from Bacillus cereus.

Flavodoxins (Flds) are small proteins that shuttle electrons in a range of reactions in microorganisms. Flds contain a redox-active cofactor, a flavin mononucleotide (FMN), and it is well established that when Flds are reduced by one electron, a peptide bond close to the FMN isoalloxazine ring flips to form a new hydrogen bond with the FMN N5H, stabilizing the one-electron reduced state. Here, we present high-resolution crystal structures of Flavodoxin 1 from Bacillus cereus in both the oxidized (ox) and one-electron reduced (semiquinone, sq) state. We observe a mixture of conformers in the oxidized state; a 50:50 distribution between the established oxidized conformation where the peptide bond is pointing away from the flavin, and a conformation where the peptide bond is pointing toward the flavin, approximating the conformation in the semiquinone state. We use single-crystal spectroscopy to demonstrate that the mixture of conformers is not caused by radiation damage to the crystal. This is the first time that such a mixture of conformers is reported in a wild-type Fld. We therefore carried out a survey of published Fld structures, which show that several proteins have a pronounced conformational flexibility of this peptide bond. The degree of flexibility seems to be modulated by the presence, or absence, of stabilizing interactions between the peptide bond carbonyl and its surrounding amino acids. We hypothesize that the degree of conformational flexibility will affect the Fld ox/sq redox potential.

The effect of copper on the redox behaviour of iron oxide for chemical-looping hydrogen production probed by in situ X-ray absorption spectroscopy.

The production of high purity hydrogen with the simultaneous capture of CO2, can be achieved through a chemical looping (CL) cycle relying on an iron oxide-based oxygen carrier. Indeed, the availability of active and cyclically stable oxygen carriers is a key criterion for the practical implementation of this technology. In this regard, improving our understanding of the reduction pathway(s) of iron-based oxygen carriers and the development of concepts to increase the reduction kinetics are important aspects. The aim of this work is to evaluate the effect of the addition of copper on the redox behaviour of iron oxide based oxygen carriers stabilized on ZrO2. In situ pulsed-H2 XANES (Fe K-edge) experiments allowed for the determination of the reduction pathways in these materials, viz. the reduction of both Fe2O3 and CuFe2O4 proceeded via a Fe2+ intermediate: Fe2O3 (CuFe2O4) → Fe3O4 (Cu0) → FeO (Cu0) → Fe0 (Cu0). In the first step CuFe2O4 is reduced to Cu0 and Fe3O4, whereby Cu0 promotes the further reduction of iron oxide, increasing their rate of formation. In particular, the rate of reduction of FeO → Fe0 is accelerated most dramatically by Cu0. This is an encouraging result as the FeO → Fe0 transition is the slowest reduction reaction.

A Binuclear Zinc Interaction Fold Discovered in the Homodimer of Alzheimer's Amyloid-ß Fragment with Taiwanese Mutation D7H.

Zinc-induced oligomerization of amyloid-ß peptide (Aß) produces potentially pathogenic agents of Alzheimer's disease. Mutations and modifications in the metal binding domain 1-16 of Aß peptide crucially affect its zinc-induced oligomerization by changing intermolecular zinc mediated interface. The 3D structure of this interface appearing in a range of Aß species is a prospective drug target for disease modifying therapy. Using NMR spectroscopy, EXAFS spectroscopy, mass spectrometry, and isothermal titration calorimetry the interaction of zinc ions with Aß fragments 1-7 and 1-10 carrying familial Taiwanese mutation D7H was studied. Zinc ions induce formation of a stable homodimer formed by the two peptide chains fastened by two zinc ions and stacking interactions of imidazole rings. A binuclear zinc interaction fold in the dimer structure was discovered. It can be used for designing zinc-regulated proteins and zinc-mediated self-assembling peptides.

Using Predefined M3(µ3-O) Clusters as Building Blocks for an Isostructural Series of Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) have attracted much attention in the past decade owing to their unprecedented internal surface areas, tunable topologies, designable surfaces, and various potential applications. One bottleneck in the field regarding MOF synthesis is controlling the metal-containing secondary building unit (SBU) incorporated into the structure. In this work we report the synthesis and characterization of five trimeric [M3(µ3-O)(CH3CO2)6]x clusters (where M = Fe3+, Cr3+, Fe3+/Cr3+, Fe3+/Co2+, or Fe3+/Ni2+ and x = +1 or 0). The monocarboxylate capping ligand, acetate in this case, readily undergoes exchange with several difunctional counterparts, including 1,4-benzenedicarboxylic acid (H2-BDC) and biphenyl-4,4'-dicarboxylic acid (H2-BPDC), for the formation of an isostructural series of MOFs, several of which are newly reported (for M = Fe3+/Cr3+, Fe3+/Co2+, and Fe3+/Ni2+) and show excellent CO2 adsorption properties. In this report, a host of techniques including NMR, ICP, and ESI-MS are used to probe the ligand exchange process and composition of the SBUs, and XAS is used to monitor the Fe3+ and Cr3+ environment throughout the reactions, giving strong evidence that the clusters stay intact throughout the MOF synthesis. This work reveals that predefined SBUs is an effective means to create metal-substituted analogues of known frameworks. Further, CO adsorption and in situ IR are used to probe accessibility of the metals after solvent removal. We show for the first time that the incorporation of the neutral clusters, containing weaker Lewis acids like Ni2+ and Co2+, can promote the formation of open metal sites in the MOF frameworks, structural features known to enhance the binding energy of small guest molecules like CO2.

Evaluation of Reoxidation Thresholds for γ-Al2O3-Supported Cobalt Catalysts under Fischer-Tropsch Synthesis Conditions.

Size-dependent phenomena at the nanoscale influence many applications, notably in the science of heterogeneous catalysis. In cobalt-based Fischer-Tropsch synthesis (FTS), the size of Co nanoparticles (NPs) dictates to a high degree catalyst's performance in terms of activity, selectivity, and stability. Here, a highly dispersed Re/Co/γ-Al2O3 catalyst with high Co surface area per gram of catalyst was exposed to industrially relevant FTS conditions and monitored in situ by synchrotron X-ray radiation. X-ray absorption near-edge structure spectra were obtained on the cobalt K edge and Re L3 edge of the working catalyst. The experimental results demonstrate development of tetrahedrally coordinated Co2+ forming at the expense of metallic Co(0). The structure of the oxide resembles CoAl2O4 and appears at the onset (first 5-10 h) of the reaction. Reoxidation of Co(0) is more pronounced close to the outlet of the reactor, where higher pH2O is anticipated. The state of the Re promoter does not change during the FT process. We propose that reoxidation of small Co NPs is followed by spreading of Co oxide that leads to the formation of CoxAlyOz phases. Hence, in order to avoid an irreversible loss of the active phase during process start-up, catalyst design should be restricted to Co NPs larger than 5.3 nm.

Cooperativity and Dynamics Increase the Performance of NiFe Dry Reforming Catalysts.

The dry reforming of methane (DRM), i.e., the reaction of methane and CO2 to form a synthesis gas, converts two major greenhouse gases into a useful chemical feedstock. In this work, we probe the effect and role of Fe in bimetallic NiFe dry reforming catalysts. To this end, monometallic Ni, Fe, and bimetallic Ni-Fe catalysts supported on a MgxAlyOz matrix derived via a hydrotalcite-like precursor were synthesized. Importantly, the textural features of the catalysts, i.e., the specific surface area (172-178 m2/gcat), pore volume (0.51-0.66 cm3/gcat), and particle size (5.4-5.8 nm) were kept constant. Bimetallic, Ni4Fe1 with Ni/(Ni + Fe) = 0.8, showed the highest activity and stability, whereas rapid deactivation and a low catalytic activity were observed for monometallic Ni and Fe catalysts, respectively. XRD, Raman, TPO, and TEM analysis confirmed that the deactivation of monometallic Ni catalysts was in large due to the formation of graphitic carbon. The promoting effect of Fe in bimetallic Ni-Fe was elucidated by combining operando XRD and XAS analyses and energy-dispersive X-ray spectroscopy complemented with density functional theory calculations. Under dry reforming conditions, Fe is oxidized partially to FeO leading to a partial dealloying and formation of a Ni-richer NiFe alloy. Fe migrates leading to the formation of FeO preferentially at the surface. Experiments in an inert helium atmosphere confirm that FeO reacts via a redox mechanism with carbon deposits forming CO, whereby the reduced Fe restores the original Ni-Fe alloy. Owing to the high activity of the material and the absence of any XRD signature of FeO, it is very likely that FeO is formed as small domains of a few atom layer thickness covering a fraction of the surface of the Ni-rich particles, ensuring a close proximity of the carbon removal (FeO) and methane activation (Ni) sites.

Frequency analysis for modulation-enhanced powder diffraction.

Periodic modulation of external conditions on a crystalline sample with a consequent analysis of periodic diffraction response has been recently proposed as a tool to enhance experimental sensitivity for minor structural changes. Here the intensity distributions for both a linear and nonlinear structural response induced by a symmetric and periodic stimulus are analysed. The analysis is further extended for powder diffraction when an external perturbation changes not only the intensity of Bragg lines but also their positions. The derived results should serve as a basis for a quantitative modelling of modulation-enhanced diffraction data measured in real conditions.

Time resolved in situ X-ray diffraction study of crystallisation processes of large pore nanoporous aluminophosphate materials.

Time resolved high-resolution X-ray powder diffraction was utilized to obtain detailed changes in the crystal structure parameters during the hydrothermal crystallization process of the nanoporous aluminophosphate AlPO-5 (AFI) structure. This in situ study offered not only the influence of metal ions on the onset of crystallization and estimation of the activation energy of the process, but also allowed us to determine in detail the changes in lattice parameters during this process. More importantly the time-resolved study clearly showed the lattice expansion in the divalent metal ions substituted system right from the on-set of crystallization process, compared to the one without any dopant ions, which suggest that an amorphous or poorly crystalline network is formed prior to crystallization that contains the large divalent ions (compared to Al(iii), the substituting element), which is in agreement with the combined XAS/XRD study reported earlier. A mechanism based on this and the earlier study is suggested.

Rationalization of dye uptake on titania slides for dye-sensitized solar cells by a combined chemometric and structural approach.

A model photosensitizer (D5) for application in dye-sensitized solar cells has been studied by a combination of XRD, theoretical calculations, and spectroscopic/chemometric methods. The conformational stability and flexibility of D5 and molecular interactions between adjacent molecules were characterized to obtain the driving forces that govern D5 uptake and grafting and to infer the most likely arrangement of the molecules on the surface of TiO2. A spectroscopic/chemometric approach was then used to yield information about the correlations between three variables that govern the uptake itself: D5 concentration, dispersant (chenodeoxycholic acid; CDCA) concentration, and contact time. The obtained regression model shows that large uptakes can be obtained at high D5 concentrations in the presence of CDCA with a long contact time, or in absence of CDCA if the contact time is short, which suggests how dye uptake and photovoltaic device preparation can be optimized.

Multivariate curve resolution applied to in situ X-ray absorption spectroscopy data: an efficient tool for data processing and analysis.

Large datasets containing many spectra commonly associated with in situ or operando experiments call for new data treatment strategies as conventional scan by scan data analysis methods have become a time-consuming bottleneck. Several convenient automated data processing procedures like least square fitting of reference spectra exist but are based on assumptions. Here we present the application of multivariate curve resolution (MCR) as a blind-source separation method to efficiently process a large data set of an in situ X-ray absorption spectroscopy experiment where the sample undergoes a periodic concentration perturbation. MCR was applied to data from a reversible reduction-oxidation reaction of a rhenium promoted cobalt Fischer-Tropsch synthesis catalyst. The MCR algorithm was capable of extracting in a highly automated manner the component spectra with a different kinetic evolution together with their respective concentration profiles without the use of reference spectra. The modulative nature of our experiments allows for averaging of a number of identical periods and hence an increase in the signal to noise ratio (S/N) which is efficiently exploited by MCR. The practical and added value of the approach in extracting information from large and complex datasets, typical for in situ and operando studies, is highlighted.