Enhancing the Electrocatalytic Oxidation of 5-Hydroxymethylfurfural Through Cascade Structure Tuning for Highly Stable Biomass Upgrading.

Electrocatalytic 5-hydroxymethylfurfural oxidation reaction (HMFOR) provides a promising strategy to convert biomass derivative to high-value-added chemicals. Herein, a cascade strategy is proposed to construct Pd-NiCo2O4 electrocatalyst by Pd loading on Ni-doped Co3O4 and for highly active and stable synergistic HMF oxidation. An elevated current density of 800 mA cm-2 can be achieved at 1.5 V, and both Faradaic efficiency and yield of 2,5-furandicarboxylic acid remained close to 100% over 10 consecutive electrolysis. Experimental and theoretical results unveil that the introduction of Pd atoms can modulate the local electronic structure of Ni/Co, which not only balances the competitive adsorption of HMF and OH- species, but also promote the active Ni3+ species formation, inducing high indirect oxidation activity. We have also discovered that Ni incorporation facilitates the Co2+ pre-oxidation and electrophilic OH* generation to contribute direct oxidation process. This work provides a new approach to design advanced electrocatalyst for biomass upgrading.

Ultra-Dilute SnCl4-Catalyzed Conversion of Concentrated Glucose to 5-Hydroxymethylfurfural in Aqueous Deep Eutectic Solvent.

5-Hydroxymethylfurfural(HMF) is a versatile chemical synthesized from glucose dehydration catalyzed by metal chloride (MClx) in deep eutectic solvents (DESs). However, the low glucose concentration and high catalyst dosage hinder large-scale HMF production. Herein, we report an aqueous DES of tetraethylammonium bromide(TEAB)-glucose for converting concentrated glucose (40 wt%, relative to TEAB) using ultra-dilute SnCl4 (0.25 mol%), achieving a 62% yield of HMF. Ultra-dilute MClx-catalyzed selective conversion of glucose is feasible only when combining SnCl4 with Br-based DES, which is elucidated by density functional theory and molecular dynamic calculations. Using SnCl4 is essential due to its higher glucose isomerization activity than AlCl3 and CrCl3, which can be attributed to its low-barrier coordination with glucose and its barrier-free separation from fructose. Halide anions in DESs strongly interact with glucose, hindering the MClx-glucose coordination and thereby reducing MClx's activity for glucose isomerization. Consequently, Br-based DESs facilitate higher activity of MClx than Cl-based DESs, due to the weaker interaction between halide anion and glucose. In addition, we elucidated the side reactions including condensation, polymerization, and isomerization, and proposed a reaction network. Our findings clarify the differential activity of MClx and the impact of halide anions in DESs on MClx's activity.

Underexplored food safety hazards of beekeeping products: Key knowledge gaps and suggestions for future research.

These days, a growing consumer demand and scientific interest can be observed for nutraceuticals of natural origin, including apiculture products. Due to the growing emphasis on environmental protection, extensive research has been conducted on the pesticide and heavy metal contamination of bee products; however, less attention is devoted on other food safety aspects. In our review, scientific information on the less-researched food safety hazards of honey, bee bread, royal jelly, propolis, and beeswax are summarized. Bee products originating from certain plants may inherently contain phytotoxins, like pyrrolizidine alkaloids, tropane alkaloids, matrine alkaloids, grayanotoxins, gelsemium alkaloids, or tutin. Several case studies evidence that bee products can induce allergic responses to sensitive individuals, varying from mild to severe symptoms, including the potentially lethal anaphylaxis. Exposure to high temperature or long storage may lead to the formation of the potentially toxic 5-hydroxymethylfurfural. Persistent organic pollutants, radionuclides, and microplastics can potentially be transferred to bee products from contaminated environmental sources. And lastly, inappropriate beekeeping practices can lead to the contamination of beekeeping products with harmful microorganisms and mycotoxins. Our review demonstrates the necessity of applying good beekeeping practices in order to protect honeybees and consumers of their products. An important aim of our work is to identify key knowledge gaps regarding the food safety of apiculture products.

Direct Reductive Amination of HMF to 5-(Aminomethyl)-2-furanmethanol Using Supported Iridium-based Catalysts.

In this work, partial reductive amination of 5-hydroxymethylfurfural (HMF) with gaseous ammonia over iridium supported on γ-Al2O3, TiO2, SiO2 and carbon has been studied. The influence of the support and pressure was investigated in the valorization under mild conditions of HMF to 5-(aminomethyl)-2-furanmethanol (AMFM). The catalysts were characterized by TEM, SEM-EDS, N2 sorption Isotherms, TGA, CO-Chemisorption, TPR, XRD, NH3-TPD, ICP-AES and XPS. The maximum activity and high rates were obtained for all catalytic systems. At 50 minutes of the reaction the Ir/C catalyst achieved 93% of conversion and exhibited the highest yield and selectivity of 92% and 99% respectively, to the desired product 5-(aminomethyl)-2-furanmethanol. The main properties that influence activity and selectivity are related to the amount of iridium on the surface and catalyst acidity. After the third cycle, 63% and 59% of selectivity and yield to AMFM respectively at 93% of conversion were obtained.

The variation of acrylamide and 5-hydroxymethylfurfural in tea with different roasting degrees and the effects of tea polyphenols on their formation.

BACKGROUND: Roasting is an essential step in making roasted teas, and its role in producing flavors has been widely studied. However, the variation of potential hazardous compounds during the tea roasting process is still vague. The present study established an effective method based on liquid chromatography-triple quadrupole-tandem mass spectrometry to simultaneously determine the variation of acrylamide (AA), 5-hydroxymethylfurfural (5-HMF), and free amino acids during the tea roasting process. Meanwhile, the effects of several tea polyphenols on the formation of AA and 5-HMF were investigated by a wet-to-dry thermal model reaction. RESULTS: Medium-temperature roasted teas had the highest levels of AA and 5-HMF, with ranges of 0.13-0.15 µg g-1 and 68.72-123.98 µg g-1, respectively. Quantitative results showed that the levels of monosaccharides and amino acids decreased during roasting, which might contribute to the formation of 5-HMF and AA. Meanwhile, the decrease of epigallocatechin gallate (EGCG), epigallocatechin (EGC), and epicatechin (EC) might be related to their inhibitory effects on 5-HMF and AA. Thermal model reaction results showed that EGCG and EC significantly inhibited 5-HMF formation with a decline rate of 33.33% and 72.22%, respectively, mainly by trapping glucose. Gallic acid (GA) also had an inhibitory effect on the formation of AA (decreased by 92.86%) and 5-HMF (44.44%), mainly through impeding the preliminary reaction of asparagine and glucose. CONCLUSION: The roasting temperature determined the levels of AA and 5-HMF in teas. Catechins inhibited the formation of 5-HMF and AA mostly through trapping monosaccharides, while the inhibitory effect of GA was achieved by impeding the reaction. © 2024 Society of Chemical Industry.

The progress of research on vacancies in HMF electrooxidation.

5-Hydroxymethylfurfural (HMF), serving as a versatile platform compound bridging biomass resource and the fine chemicals industry, holds significant importance in biomass conversion processes. The electrooxidation of HMF plays a crucial role in yielding the valuable product (2,5-furandicarboxylic acid), which finds important applications in antimicrobial agents, pharmaceutical intermediates, polyester synthesis, and so on. Defect engineering stands as one of the most effective strategies for precisely synthesizing electrocatalytic materials, which could tune the electronic structure and coordination environment, and further altering the adsorption energy of HMF intermediate species, consequently increasing the kinetics of HMF electrooxidation. Thereinto, the most routine and effective defect are the anionic vacancies and cationic vacancies. In this concise review, the catalytic reaction mechanism for selective HMF oxidation is first elucidated, with a focus on the synthesis strategies involving both anionic and cationic vacancies. Recent advancements in various catalytic oxidation systems for HMF are summarized and synthesized from this perspective. Finally, the future research prospects for selective HMF oxidation are discussed.

High-Efficiency Solar Transformation of Sugars via Heterogeneous Gallium(III) Catalyst.

Extremely limited research exploring the photocatalytic potential of main group metals, such as aluminum, gallium, and tin, has been undertaken due to their weak light harvesting properties. This study reports the efficient transformation of sugars to 5-hydroxymethylfurfural (HMF) with high yield employing an original heterogenous photocatalyst comprising a gallium(III) complex immobilized on an alumina support. Under visible light irradiation, the reaction rate of HMF formation is ~143 times higher than the equivalent thermal reaction performed in the absence of light. The turnover number (TON) the heterogeneous gallium (III) photocatalyst was as high as 1500, which was two orders of magnitude higher than the TON of the homogeneous gallium (III) system. It is proposed that photoirradiation significantly enhances the Lewis acidity of the catalyst by forming a semi-coordination state between gallium(III) and N-donor ligands, enabling the increased interaction of reactant sugar molecules with gallium(III) active sites. Consistent with this, the photoresponsive coordination of the gallium(III) complex and the abstraction of the hydroxy group by the metal under irradiation with visible light is observed by NMR spectroscopy for the first time. These findings demonstrate that efficient photocatalysts derived from the main group elements can facilitate biomass conversion using visible light.

Ligand-Hybridization Activates Lattice-Hydroxyl-Groups of NiCo(OH) x Nanowires for Efficient Electrosynthesis.

Electrochemical dehydrogenation of hydroxides plays a crucial role in the formation of high-valence metal active sites toward 5-hydroxymethylfurfural oxidation reaction (HMFOR) to produce the value-added chemical of 2,5-furandicarboxylic (FDCA). Herein, we construct benzoic acid ligand-hybridized NiCo(OH)x nanowires (BZ-NiCo(OH)x) with ample electron-deficient Ni/Co sites for HMFOR. The robust electron-withdrawing capability of benzoic acid ligands in BZ-NiCo(OH)x speeds up the electrochemical activation and dehydrogenation of lattice-hydroxyl-groups (M2+-O-H ⇌ M3+-O), boosting the formation of abundant electron-deficient and high-valence Ni/Co sites. DFT calculation reveals that the deintercalation proton is prone to establishing a hydrogen bridge with the carbonyl group in benzoic acid, facilitating the proton transfer. Coupled with the synergistic oxidation of Ni/Co sites on hydroxyl and aldehyde groups, BZ-NiCo(OH)x delivers a remarkable current density of 111.20 mA cm-2 at 1.4 V for HMFOR, exceeding that of NiCo(OH)x by approximately fourfold. And the FDCA yield and Faraday efficiency are as high as 95.24% and 95.39%, respectively. The ligand-hybridized strategy in this work introduces a novel perspective for designing high-performance transition metal-based electrocatalysts for biomass conversion.

Influence of Hydroxycinnamic Acids on the Maillard Reaction of Arabinose and Galactose beyond Carbonyl-Trapping.

Hydroxycinnamic acids, known for their health benefits and widespread presence in plant-based food, undergo complex transformations during high-temperature processing. Recent studies revealed a high browning potential of hydroxycinnamic acids and reactive Maillard reaction intermediates, but the role of phenolic compounds in the early stage of these reactions is not unambiguously understood. Therefore, we investigated the influence of caffeic acid and ferulic acid on the nonenzymatic browning of arabinose, galactose, and/or alanine, focusing on the implications on the formation of relevant early-stage Maillard intermediates and phenol-deriving products. Contrary to previous assumptions, hydroxycinnamic acids were found to promote nonenzymatic browning instead of solely trapping reactive intermediates. This was reflected by an intense browning, which was attributed to the formation of heterogeneous phenol-containing Maillard products. Although, caffeic acid is more reactive than ferulic acid, the formation of reactive furan derivatives and of heterogeneous phenol-containing colorants was promoted in the presence of both hydroxycinnamic acids.

Base-Free Oxidation of HMF to FDCA over Ru/Cu-Co-O·MgO under Aqueous Conditions.

The copper-cobalt metal oxide composite magnesium oxide catalyst loaded with Ru has achieved the aerobic oxidation of 5-hydroxymethylfurfural (HMF) to the bio-based polyester monomer 2,5-furandicarboxylic acid (FDCA) under base-free conditions. Several Ru/Cu-Co-O·MgO catalysts were prepared, with Cu-Co-O being a combination of CuO and Co3O4. The catalyst's activity was boosted by the synergistic interaction between copper and cobalt, as well as an optimal copper-to-cobalt molar ratio. Optimal catalytic activity was observed in the Ru4/Cu1-Co1-O·MgO catalyst, loaded with 4 wt% Ru when copper-to-cobalt molar ratio of 1:1 and magnesium oxide compounding amount of 6 mmol were employed. The inclusion of MgO and the load of Ru not only expanded the specific surface area of the catalyst but also heightened its basicity. Additionally, the presence of loaded Ru improved the catalyst's reducibility at low temperatures. In aqueous solution under oxygen pressure, the conversion rate of HMF achieved 100%, and the yield of FDCA was 86.1%. After five reaction cycles, examining the catalyst and solution revealed that Ru nanoparticles resisted leaching or oxidation, and MgO exhibited only slight dissolution. The green separation of the product was achieved using semi-preparative liquid chromatography, selectively collecting the FDCA-containing solution by exploiting variations in interactions between solutes and the stationary/mobile phases. The subsequent steps involved rotary evaporation and drying, resulting in FDCA powder with a purity exceeding 99%. Notably, this approach eliminated the need to introduce concentrated hydrochloric acid into the system for FDCA separation, providing a novel method for synthesising powdered FDCA.

Ethnobotany, phytochemistry, pharmacology and quality control of Peucedanum decursivum (Miq.) Maxim: A critical review.

ETHNOPHARMACOLOGICAL RELEVANCE: Dried roots of Peucedanum decursivum, a traditional Chinese medicine (TCM), has historically respiratory diseases such as cough, thick phlegm, headache, fever, and gynecological diseases, rheumatoid arthritis, and nasopharyngeal carcinoma. AIM OF THE STUDY: Made an endeavor to evaluate the research trajectory of P. decursivum, comprehensively discern its developmental status, and offer a guideline for future investigations. MATERIALS AND METHODS: A meticulous search of literatures and books from 1955 to 2024 via databases like PubMed, Web of Science and CNKI was conducted, including topics and keywords of " P. decursivum" "Angelica decursivum" and "Zihua Qianhu". RESULTS: P. decursivum and its prescriptions have traditionally been used for treating phlegm-heat cough, wind-heat cough, gastrointestinal diseases, pain relief and so on. It contains 234 identified compounds, encompassing coumarins, terpenes, volatile oils, phenolic acids, fatty acids and derivatives. It exhibits diverse pharmacological activities, including anti-asthmatic, anti-inflammatory, antioxidant effects, anti-hypertensive, anti-diabetic, anti-Alzheimer, and anti-cancer properties, primarily attributed to coumarins. Microscopic identification, HPLC fingerprinting, and bioinformatics identification are the primary methods currently used for the quality control. CONCLUSION: P. decursivum demonstrates anti-asthmatic, anti-inflammatory, and antioxidant effects, aligning with its traditional use. However, experimental validation of its efficacy against phlegm and viruses is needed. Additionally, analgesic effects mentioned in historical texts lack modern pharmacological studies. Numerous isolated compounds exhibit highly valuable medicinal properties. Future research can delve into exploring these substances further. Rigorous of heavy metal contamination, particularly Cd and Pb, is necessary. Simultaneously, investigating its pharmacokinetics and toxicity in humans is crucial for the safety.

Introducing Fe into Cu-based catalyst to boost the electrocatalytic hydrogenation of 5-hydroxymethylfurfural.

Converting biomass-derived 5-hydroxymethylfurfural (HMF) into high-valued 2,5-bis (hydroxymethyl)furan (BHMF) via electrocatalytic hydrogenation (ECH) technology has been widely regarded as one of the most economical and eco-friendly routes. The high selectivity and activity depend on the reasonable regulation of the adsorption and activation of adsorbed hydrogen (H*) and HMF on the surface of the electrocatalyst. Herein, we report nanoflower-like CuFe-based electrocatalysts on copper foam (CF) substrates (CuFeOx/CF). BHMF was achieved on the optimal CuFeOx/CF with a selectivity of 93.3% and a yield of 90.1%. The H*, HMF and product were observed by in situ attuned total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Moreover, in situ Raman spectra discloses the reconstruction of catalyst into CuFe-bimetal with low valence state. Density functional theory (DFT) calculations demonstrate that introducing Fe plays a role in regulating the electronic structure of Cu sites, which facilitate the generation of H* and adsorption of HMF, thus hampering the occurrence of dimerization. This study provides an innovative idea for the rational design of non-precious bimetallic electrocatalysts for ECH to produce high-valued chemicals.

Improving 5-(hydroxymethyl)furfural (HMF) tolerance of Pseudomonas taiwanensis VLB120 by automated adaptive laboratory evolution (ALE).

The aldehyde 5-(hydroxymethyl)furfural (HMF) is of great importance for a circular bioeconomy. It is a renewable platform chemical that can be converted into a range of useful compounds to replace petroleum-based products such as the green plastic monomer 2,5-furandicarboxylic acid (FDCA). However, it also exhibits microbial toxicity for example hindering the efficient biotechnological valorization of lignocellulosic hydrolysates. Thus, there is an urgent need for tolerance-improved organisms applicable to whole-cell biocatalysis. Here, we engineer an oxidation-deficient derivative of the naturally robust and emerging biotechnological workhorse P. taiwanensis VLB120 by robotics-assisted adaptive laboratory evolution (ALE). The deletion of HMF-oxidizing enzymes enabled for the first time evolution under constant selection pressure by the aldehyde, yielding strains with consistently improved growth characteristics in presence of the toxicant. Genome sequencing of evolved clones revealed loss-of function mutations in the LysR-type transcriptional regulator-encoding mexT preventing expression of the associated efflux pump mexEF-oprN. This knowledge allowed reverse engineering of strains with enhanced aldehyde tolerance, even in a background of active or overexpressed HMF oxidation machinery, demonstrating a synergistic effect of two distinct tolerance mechanisms.

Bioconversion of Furanic Compounds by Chlorella vulgaris-Unveiling Biotechnological Potentials.

Lignocellulosic biomass is abundant on Earth, and there are multiple acidic pretreatment options to separate the cellulose, hemicellulose, and lignin fraction. By doing so, the fermentation inhibitors 5-Hydroxymethylfurfural (HMF) and furfural (FF) are produced in varying concentrations depending on the hydrolyzed substrate. In this study, the impact of these furanic compounds on Chlorella vulgaris growth and photosynthetic activity was analyzed. Both compounds led to a prolonged lag phase in Chlorella vulgaris growth. While the photosynthetic yield Y(II) was not significantly influenced in cultivations containing HMF, FF significantly reduced Y(II). The conversion of 5-Hydroxymethylfurfural and furfural to 5-Hydroxymethyl-2-Furoic Acid and 2-Furoic Acid was observed. In total, 100% of HMF and FF was converted in photoautotrophic and mixotrophic Chlorella vulgaris cultivations. The results demonstrate that Chlorella vulgaris is, as of now, the first known microalgal species converting furanic compounds.

Utilization of Peptidoglycans from Lactic Acid Bacterial Cell Walls for the Mitigation of Acrylamide and 5-Hydroxymethylfurfural.

Acrylamide (AA) and 5-hydroxymethylfurfural (HMF), which are potentially carcinogenic to humans, are often produced during the hot processing of foods. This study first used a molecular docking model to simulate the binding behavior of four lactic acid bacteria peptidoglycans (PGNs) to AA/HMF, and the binding rate of LAB-based PGNs to AA/HMF was evaluated in vitro. In silico results show that interaction energy is the driving force responsible for the adsorption of LAB-derived PGNs to AA/HMF. In vitro results showed that the PGN of B. lactis B1-04 bound the most AA (28.7%) and HMF (48.0%), followed by L. acidophilus NCFM, B. breve CICC 6079, and L. plantarum CICC 22135. Moreover, an AA/HMF-bound layer on the cell surface of B. lactis B1-04 was observed via AFM and SEM due to adsorption. XPS analysis indicated the removal rate of AA/HMF by selected strains was positively correlated with the proportion of C-O, C=O, and N-H groups of PGNs. The atoms O1, O2, O3, O4, N1, N2, N3, H1, and H2 are involved in the adsorption of LAB-based PGNs to AA/HMF. Thus, the PGNs derived from these four Lactobacillus strains can be regarded as natural adsorbents for the binding of AA/HMF.

Built-in electric field in NiO-CuO heterostructures to regulate the hydroxide adsorption sites for 5-hydroxymethylfurfural electrooxidation assisted hydrogen production.

The development of catalysts with suitable adsorption behavior for the reaction molecules and the elucidation of their internal structure-adsorption-catalytic activity relationships are crucial for the electrooxidation of 5-hydroxymethylfurfural (HMF). In this work, NiO-CuO heterostructures with a spontaneous built-in electric field (BEF) are specifically designed and used to regulate the OH- adsorption site for freeing up the active site of HMF for the HMF oxidation reaction (HMFOR). The mechanism driving electron pumping/accumulation of the BEF is examined by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). Electrochemical data and theoretical calculations show that BEF modulates the adsorption energy and adsorption site of substrate molecules, thereby enhancing the performance of HMFOR and hydrogen evolution reaction (HER). Notably, the NiO-CuO electrode demonstrates high 2,5-Furandicarboxylic acid (FDCA) selectivity (99.76 %) and generation rate (13.79 mmol gcat-1 h-1). It only requires 1.33 V to obtain a current density of 10 mA cm-2 for HMFOR-coupled H2 evolution. This research introduces a novel approach by regulating the adsorption of reactive molecules for HMFOR-assisted H2 evolution.

Oxygen Vacancies Enrichment in Citric Acid-Assisted Synthesis of Zirconia Supported Ni Catalyst for Highly Selective Hydrogenolysis of 5-Hydroxymethylfurfural.

2, 5-Dimethylfuran (DMF), which is a promising new-generation liquid biofuel, has attracted widespread attention owing to the sustainability of biomass-derived energy sources. In this study, a highly dispersed zirconia-supported nickel catalyst (CA-Ni/ZrO2) was prepared via citric acid-assisted wetness impregnation for the selective hydrogenolysis of 5-hydroxymethylfurfural (HMF) to produce DMF. The characterization results confirmed the presence of Zr3+ species in the mesoporous CA-Ni/ZrO2 catalyst and the formation of oxygen vacancies during its preparation, which led to the formation of a large number of catalytically active sites for the adsorption and activation of the C=O/C-O groups. Under appropriate reaction parameters, an excellent DMF selectivity of 99.1 % and an HMF conversion of 98.4 % were achieved. A suitable kinetic model revealed that DMF was preferentially formed via the 2,5-dihydroxymethylfuran intermediate route, although a 5-methylfurfural route was also observed. Additionally, the interaction between Ni and ZrO2 significantly affected the stability of the catalyst. This study will provide guidelines for optimizing the catalytic conversion of furan derivatives over heterogeneous catalysts.

Metal vacancy-enriched layered double hydroxide for biomass molecule electrooxidation coupled with hydrogen production.

The electrochemical oxidation of biomass molecules coupling with hydrogen production is a promising strategy to obtain both green energy and value-added chemicals; however, this strategy is limited by the competing oxygen evolution reactions and high energy consumption. Herein, we report a hierarchical CoNi layered double hydroxides (LDHs) electrocatalyst with abundant Ni vacancies for the efficient anodic oxidation of 5-hydroxymethylfurfural (HMF) and cathodic hydrogen evolution. The unique hierarchical nanosheet structure and Ni vacancies provide outstanding activity and selectivity toward several biomass molecules because of the finely regulated electronic structure and highly-exposed active sites. In particular, a high faradaic efficiency (FE) at a high current density (99% at 100 mA cm-2) is achieved for HMF oxidation, and a two-electrode electrolyzer is assembled based on the Ni vacancies-enriched LDH, which realized a continuous synthesis of highly-pure 2,5-furandicarboxylic acid products with high yields (95%) and FE (90%).

Heteropolyacid promoted lignin-MOF derived spherical catalyst for catalytic hydrogen transfer of 5-hydroxymethylfurfural.

Catalytic conversion of biomass-derived value-added chemicals was of great significance for the utilization of renewable biomass resources to instead of fossil chemicals. Biomass-derived lignin was regarded as an important support and 5-hydroxymethylfurfural (HMF) was a vital platform chemical derived from cellulose. Herein, a series of lignin-MOF hybrid catalysts were prepared and modified with different heteropolyacids (HPAs), which were then successfully introduced into the selective conversion of HMF to 5-hydroxymethylfurfuryl alcohol (MFA). The effect of different HPA, calcination temperature, etc. were all studied, and all catalysts were well characterized. It was confirmed that silicotungstic acid modified catalyst (Ni3Co-MOF-LS@HSiW) exhibited the best catalytic performance, while the highest conversion of HMF was up to 100%, with the best MFA yield of 86.5%. The finding in this study could provide novel insights for the utilization of lignin and preparation of value-added biomass-derived chemicals.

5-Hydroxymethylfurfural mediated developmental toxicity in Drosophila melanogaster.

5-hydroxymethylfurfural is a common byproduct in food. However, its effect on growth and development remains incompletely understood. This study investigated the developmental toxicity of 5-HMF to Drosophila larvae. The growth and development of Drosophila melanogaster fed with 5-50 mM 5-HMF was monitored, and its possible mechanism was explored. It was found that 5-HMF prolonged the developmental cycle of Drosophila melanogaster (25 mM and 50 mM). After 5-HMF intake, the level of reactive oxygen species in the third instar larvae increased by 1.23-1.40 fold, which increased the level of malondialdehyde and caused changes in antioxidant enzymes. Moreover, the nuclear factor erythroid-2 related factor 2 antioxidant signaling pathway and the expression of heat shock protein genes were affected. At the same time, 5-HMF disrupted the glucose and lipid metabolism in the third instar larvae, influencing the expression level of key genes in the insulin signal pathway. Furthermore, 5-HMF led to intestinal oxidative stress, and up-regulated the expression of the pro-apoptotic gene, consequently impacting intestinal health. In short, 5-HMF causes oxidative stress, disturbs glucose and lipid metabolism and induces intestinal damage, damaging related signaling pathways, and ultimately affecting the development of Drosophila melanogaster.