Incorporating an artificially synthesized fluoride complex into urethane-acrylate-based 3D printing resin: Effects on mechanical properties, cytotoxicity, antimicrobial actions, and its long-term fluoride-releasing properties.

OBJECTIVES: To synthesize a 3D printing resin with antibacterial and long-term fluoride-releasing properties. METHODS: (4,4-Bis-4-[2­hydroxy-3-(2-methacryloyloxy)propoxy]-phenyl-pentanol-amine)-N,N-diacetic acid zirconium (IV) fluoride complex was synthesized from 4,4-bis-(4-hydroxyphenyl)-pentanoic acid and monitored using proton nuclear magnetic resonance spectroscopy. The synthesized complex was incorporated into a urethane-acrylate-based (UA) resin at 5 wt% and 10 wt% (5F-UA and 10F-UA groups, respectively). The UA resin without the synthesized complex was considered as the control group. All groups were 3D printed using a DLP printer, followed by 10 min of washing and 20 min of curing. Surface characteristics were observed using scanning electron microscopy. The mechanical properties were assessed by measuring its flexural strength and Vickers hardness. The antibacterial property was investigated with direct and indirect contact tests and a WST-8 metabolic activity assay. The suspension was fully mixed and diluted for counting the number of colony-forming units. The cell viability test was performed using a cell proliferation assay. The amount of fluoride released was measured daily for 28 days using ion chromatography. One-way analysis of variance was performed for statistical analyses using SPSS software. RESULTS: The amount of fluoride released increased with the concentration of fluoride complex in the resin. The fluoride ions were constantly released at a low concentration from the 3D printed specimens (5F-UA: around 0.13 ppm daily; 10F-UA: around 0.22 ppm daily). The antibacterial efficacy was acceptable in both the 5F-UA and 10F-UA groups, and higher in the latter. No cytotoxicity of the resin was detected. The mechanical properties were significantly influenced by the addition of the fluoride-releasing complex. CONCLUSIONS: The present 3D printing UA resin incorporating a fluoride complex effectively inhibited the growth of S. mutans and demonstrated the ability to slowly release fluoride over an extended period of time. CLINICAL SIGNIFICANCE: This study provided informative composition of a fluoride-releasing UA-based 3D printing resin, ideal for dental applications such as crowns, bridges, removable partial dentures, and orthodontic appliances, which can benefit from sustained fluoride release and antimicrobial properties. Further modifications to the resin composition can be easily achieved to enhance the resin qualities.

Antimicrobial and Antioxidant Activity of Some Nitrogen-Containing Heterocycles and Their Acyclic Analogues.

We investigated antimicrobial and antioxidant activity of nitrogen-containing heterocycles and their acyclic analogues, some of which can be considered as promising in terms of biological activity. Based on structure, 26 tested compounds were divided into 4 groups. In the test with 2,2-diphenyl-1-picrylhydrazyl (DPPH), the compounds of the group 2 had the highest radical-binding activity (RBA) (53-78%), while those of group 3 had the lowest values (1.5-5.2%). In oxygen radical absorbance capacity assay, all compounds from groups 1, 2 and 3 showed high RBA: 44-94% at 50 µM. The highest bacteriostatic activity against Escherichia coli was found for four compounds in group 2 (MIC = 0.25-1 mM) and low bacteriostatic activity for group 3 (MIC > 4 mM). Some relationships between the structure of compounds and the values of the MIC are revealed. It was also found that four substances from different groups had the ability to inhibit the formation of colonies in E. coli from 1.3 to 5.7 times. Four compounds reduced specific biofilm formation by 40-60%. The tested substances did not induce the expression of the sulA gene controlled by the SOS system, which indicates the lack of genotoxic activity. None of the tested compounds had pro-oxidant activity. This was shown by both the absence of production hydrogen peroxide in a bacteria-free medium and inability to induce expression of the katG gene encoding HPI catalase in growing E. coli. The data obtained could be useful in the development of new drugs.

Antibacterial Properties of Peptide and Protein Fractions from Cornu aspersum Mucus.

The discovery and investigation of new natural compounds with antimicrobial activity are new potential strategies to reduce the spread of antimicrobial resistance. The presented study reveals, for the first time, the promising antibacterial potential of two fractions from Cornu aspersum mucus with an MW < 20 kDa and an MW > 20 kDa against five bacterial pathogens-Bacillus cereus 1085, Propionibacterium acnes 1897, Salmonella enterica 8691, Enterococcus faecalis 3915, and Enterococcus faecium 8754. Using de novo sequencing, 16 novel peptides with potential antibacterial activity were identified in a fraction with an MW < 20 kDa. Some bioactive compounds in a mucus fraction with an MW > 20 kDa were determined via a proteomic analysis on 12% sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and bioinformatics. High homology with proteins and glycoproteins was found, with potential antibacterial activity in mucus proteins named aspernin, hemocyanins, H-lectins, and L-amino acid oxidase-like protein, as well as mucins (mucin-5AC, mucin-5B, mucin-2, and mucin-17). We hypothesize that the synergy between the bioactive components determined in the composition of the fraction > 20 kDa are responsible for the high antibacterial activity against the tested pathogens in concentrations between 32 and 128 µg/mL, which is comparable to vancomycin, but without cytotoxic effects on model eukaryotic cells of Saccharomyces cerevisiae. Additionally, a positive effect, by reducing the levels of intracellular oxidative damage and increasing antioxidant capacity, on S. cerevisiae cells was found for both mucus extract fractions of C. aspersum. These findings may serve as a basis for further studies to develop a new antibacterial agent preventing the development of antibiotic resistance.

Analysing chemical composition and antimicrobial activity of geopropolis from Melipona scutellaris: HPLC-DAD and in vitro/in silico investigations.

This study evaluated the chemical profile, antimicrobial activity, and the presence of potentially toxic elements in geopropolis extracts produced by Melipona scutellaris in the Recôncavo region of Bahia, Brazil. It was found that the major chemical compounds belong to the class of phenolic compounds, with emphasis on the presence of gallic acid. In this study, no potentially toxic elements were found in the analysed geopropolis. Regarding the antimicrobial potential, gram-positive bacteria were susceptible to the action of geopropolis extract at concentrations of 0.25 to 2.5 mg.mL-1, highlighting its microbiological activity against Streptococcus mitis (ATCC 00456) and Candida albicans (CCMB 251). Thus, this geopropolis extract can be used as a bacteriostatic rather than a bactericide. Our results suggest the potential for the economic and therapeutic use of M. scutellaris geopropolis, adding value to one of the meliponiculture products.

Formulation of biodegradable alginate-based nano-carriers for in-vitro drug delivery and antibacterial activity.

Evaluation of the controlled release of ciprofloxacin (CIP.HCl) and the antibacterial efficacy of alginate (ALG)-based nanocarriers constitute the primary objectives of the current work. Herein, ALG-based nano-structures were prepared by the co-precipitation method and thoroughly analyzed using different characterization techniques, i.e., fourier transform infrared (FT-IR), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and zeta potential (ZP). The intense peaks emerged at 500, 545, and 750 cm-1 due to the CeO bond. Peaks that appeared at 550-600 cm-1 and 525 cm-1 are due to the stretching vibrations of FeO and ZnO bonds, respectively. Lowering of the peaks from 1640 to 1630 cm-1 and 1420 to 1384 cm-1 were observed in ALG-based nanocomposite (NC) due to the interaction of ALG with metal oxides (MO), which confirmed the formulation of CeO2/ZnFe2O4/ALG nanocomposite. The diffraction peaks at 28.6°, 56.6°, 76.5°, 37°, 47.9°, 62.3°, 74°, 13°, 21° confirmed the synthesis of MO (crystallite size 15.74 nm) and CeO2/ZnFe2O4/ALG (12 nm). In accordance with morphological studies, CeO2/ZnFe2O4 oxides had a uniform distribution throughout the relatively smooth and permeable surface of the ALG-based NC. Ciprofloxacin (CIP) was used as a model drug. Negative values of ZP revealed that CIP-loaded nanocomposite (CeO2/ZnFe2O4/ALG/CIP) had more stability than CeO2/ZnFe2O4/ALG. The maximum percentage of loading around 25 % on ALG NC was examined using the optical density (OD) method at pH 5.5. Correlation coefficients from the first order (0.971), Korsmeyer (0.9858), and Hixson (0.9021) models show the best-fitted models of the release profile in all circumstances. The release mechanism was investigated using various kinetics models. The controlled drug released was observed around 17 % at 40 °C after 3 h at pH 7.4, which is almost identical to the body temperature of a human, which is 37 °C. Similarly, after 24 h, sustained and controlled in-vitro release of the drug was studied, and it was 37, 72, and 74 % at pH 2.2, 7.4, and 9.4, respectively. Thus, prepared ALG-based NC is suitable for the controlled in-vitro release of (CIP.HCl). Metal oxides (CeO2/ZnFe2O4) and ALG-based nanocomposite (CeO2/ZnFe2O4/ALG) showed great antibacterial activity against Staphylococcus aureus (S. aureus) like 15 mm and 14 mm than Escherichia coli (E. coli).

Antimicrobial efficacy of Punica granatum Lythraceae peel extract against pathogens belonging to the ESKAPE group.

The improper use and abuse of antibiotics have led to an increase in multidrug-resistant (MDR) bacteria resulting in a failure of standard antibiotic therapies. To date, this phenomenon represents a leading public health threat of the 21st century which requires alternative strategies to fight infections such as the identification of new molecules active against MDR strains. In the last 20 years, natural extracts with biological activities attracted scientific interest. Following the One Health Approach, natural by-products represent a sustainable and promising alternative solution. Consistently, the aim of the present study was to evaluate the antimicrobial activity of hydro-alcoholic pomegranate peel extract (PPE) against MDR microorganisms belonging to Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp. "ESKAPE" group pathogens. Through semiquantitative and quantitative methods, the PPE showed effective antimicrobial activity against Gram-positive and Gram-negative MDR bacteria. The kinetics of bactericidal action of PPE highlighted that microbial death was achieved in a time- and dose-dependent manner. High concentrations of PPE exhibited antioxidant activity, providing a protective effect on cellular systems and red blood cell membranes. Finally, we report, for the first time, a significant intracellular antibacterial property of PPE as highlighted by its bactericidal action against the staphylococcal reference strain and its bacteriostatic effect against clinical resistant strain in the HeLa cell line. In conclusion, due to its characterized content of polyphenolic compounds and antioxidant activity strength, the PPE could be considered as a therapeutic agent alone or in conjunction with standard antibiotics against challenging infections caused by ESKAPE pathogens.

Comparative Assessment of the Antibacterial and Antibiofilm Actions of Benzalkonium Chloride, Erythromycin, and L(+)-Lactic Acid against Raw Chicken Meat Campylobacter spp. Isolates.

Campylobacter spp. are significant zoonotic agents, which cause annually millions of human cases of foodborne gastroenteritis worldwide. Their inclusion in biofilms on abiotic surfaces seems to play a pivotal role in their survival outside of the host, growth, and spread. To successfully mitigate the risks that arise with these bacteria, it is crucial to decrease their prevalence within the food production chain (from farm to the table), alongside the successful treatment of the resulting illness, known as campylobacteriosis. For this, the use of various antimicrobial agents remains actively in the foreground. A general-purpose biocide and cationic surfactant (benzalkonium chloride; BAC), a widely used macrolide antibiotic (erythromycin; ERY), and a naturally occurring organic acid (L(+)-lactic acid; LA) were comparatively evaluated in this work for their potential to inhibit both the planktonic and biofilm growth of 12 selected Campylobacter spp. (of which, seven were C. jejuni and five were C. coli) raw chicken meat isolates, all grown in vitro as monocultures. The inhibitory action of LA was also studied against four mixed-culture Campylobacter biofilms (each composed of three different isolates). The results showed that the individual effectiveness of the agents varied significantly depending on the isolate, growth mode (planktonic, biofilm), intercellular interactions (monocultures, mixed cultures), and the growth medium used (with special focus on blood presence). Thus, BAC exhibited minimum inhibitory concentrations (MICs), minimum bactericidal concentrations (MBCs), and minimum biofilm inhibitory concentrations (MBICs) that ranged from 0.5 to 16 µg/mL. Interestingly enough, these values varied widely from 0.25 to 1024 µg/mL for ERY. Concerning LA, the MICs, MBCs, and MBICs varied from 1024 to 4096 µg/mL, with mixed-culture biofilm formation always being more difficult to suppress when compared to biofilm monocultures. In addition, it was evident that intercellular interactions encountered within mixed-culture Campylobacter biofilms significantly influenced both the population dynamics and the tolerance of each consortium member to acid exposure. Overall, the findings of this study provide useful information on the comparative effectiveness of three well-known antimicrobial agents for the control of Campylobacter spp. under various growth modes (i.e., planktonic, biofilm, monocultures, mixed cultures) that could potentially be encountered in food production and clinical settings.

Influence of Dead Cells Killed by Industrial Biocides (BAC and DBNPA) on Biofilm Formation.

Industrial biocides aim to keep water systems microbiologically controlled and to minimize biofouling. However, the resulting dead cells are usually not removed from the water streams and can influence the growth of the remaining live cells in planktonic and sessile states. This study aims to understand the effect of dead Pseudomonas fluorescens cells killed by industrial biocides-benzalkonium chloride (BAC) and 2,2-dibromo-3-nitrilopropionamide (DBNPA)-on biofilm formation. Additionally, the effect of different dead/live cell ratios (50.00% and 99.99%) was studied. The inoculum was recirculated in a Parallel Plate Flow Cell (PPFC). The overall results indicate that dead cells greatly affect biofilm properties. Inoculum with DBNPA-dead cells led to more active (higher ATP content and metabolic activity) and thicker biofilm layers in comparison to BAC-dead cells, which seems to be linked to the mechanism of action by which the cells were killed. Furthermore, higher dead cell ratios (99.99%) in the inoculum led to more active (higher culturability, metabolic activity and ATP content) and cohesive/compact and uniformly distributed biofilms in comparison with the 50.00% dead cell ratio. The design of future disinfection strategies must consider the contribution of dead cells to the biofilm build-up, as they might negatively affect water system operations.

Association of Papacarie Duo® and low-level laser in antimicrobial photodynamic therapy (aPDT).

Dental caries is a multifactorial, non-communicable disease. Effective treatment options for minimally invasive removal of carious tissue include Papacarie Duo® gel and antimicrobial photodynamic therapy (aPDT). aPDT involves a combination of a light source and photosensitizer. Given that Papacarie Duo® contains a percentage of blue dye, this study aims to explore the antimicrobial potential of Papacarie Duo® when associated with a light source against Streptococcus mutans strains. The chosen light source was a low-power diode laser (λ = 660 nm, E = 3 J, P = 100 mW, t = 30 s). To assess antimicrobial capacity, planktonic suspensions of Streptococcus mutans were plated on Brain Heart Infusion Agar (BHI) to observe the formation of inhibition halos. The studied groups included methylene blue (0.005%), Papacarie Duo®, distilled water (negative control), 2% chlorhexidine (positive control), Papacarie Duo® + laser, and methylene blue (0.005%) + laser. Following distribution onto plates, each group was incubated at 37 °C for 48 h under microaerophilic conditions. Inhibition halos were subsequently measured using a digital caliper. The results showed that chlorhexidine had the greatest antimicrobial effect followed by the group of irradiated methylene blue and irradiated Papacarie Duo®. All experimental groups demonstrated antimicrobial potential, excluding the negative control group. The study concludes that Papacarie Duo® exhibits antimicrobial properties when associated with a low-power diode laser.

Opuntioideae cactus stem Bioimaging analysis: Bridging taxonomy and antimicrobial research.

This study presents a comprehensive scanning electron microscopy (SEM) analysis of Opuntioideae cactus stems indigenous to the arid regions of Saudi Arabia, elucidating their intricate microstructural features. The findings not only advance taxonomic understanding by aiding in species differentiation but also reveal the antimicrobial potential of these cacti, highlighting their significance as valuable natural resources for both ecological and pharmaceutical applications. The present study is aimed to present the stem epidermal anatomical description of Opuntioideae (Cactaceae) belonging to genus Opuntia (five Species), Cylindropuntia (two Species), and Austrocylindropuntia (one Species) as tool for systematic identification. Stem epidermal anatomical features represent here are epidermal cells, stomatal complex, subsidiary cells, and trichomes findings was observed using light microscope and SEM. The stem epidermal sections were made by heating in test tube containing lactic acid and nitric acid protocol. In anatomical findings, irregular, zigzag, wavy, and polygonal epidermal cells with sinuate, sinuous, and straight anticlinal walls were observed. Quantitatively minimum length (28.05 ± 2.05 µm) and width (23.15 ± 3.41 µm) of epidermal cells were noted in Cylindropuntia kleiniae. Paracytic type of stomata present was observed in all species with kidney-shaped guard cell present in six species, and in Opuntia macrocentra and Austrocylindropuntia subulata, dumbbell-shaped guard cells were observed. The largest length of stomata (53.25 ± 2.05 µm) and width of stomata (35.10 ± 5.19 µm) were observed in Opuntia monacantha. In present research work, stem anatomical features show many diverse characters are of special attention for plant taxonomist for the correct identification and provide baseline for further study in subfamily Opuntiodeae. RESEARCH HIGHLIGHTS: The intricate microstructures of Opuntioideae cactus stems. Investigating the antimicrobial potential of compounds found within Opuntioideae cactus stems. Correlations between the unique structural features observed through SEM and the antimicrobial activity of Opuntioideae cactus stem extracts.

Antimicrobial activity of cleansers on the cobalt-chromium surface of removable partial denture: a systematic review.

This study aimed to review systematically the literature about the antimicrobial action of evaluated cleansers on the Co-Cr alloy of RPD. The search was conducted in MEDLINE/PubMed, Scopus, Lilacs, Embase and Science Direct May, 2022. The review was performed based on PRISMA guidelines and recorded in Open Science Framework. Independent reviewers performed the search, selection, extraction, and analysis of the data. The risk of bias of the in vitro and clinical trials studies was analyzed by the Joanna Briggs Institute tool. A total of 187 articles were found and 9 were included. The cleansers that showed antimicrobial action were 2% and 5.25% sodium hypochlorite, 0.12% chlorhexidine and NitrAdine effervescent tablet. Polident, Corega Tabs effervescent tablets and 5 mg/mL chitosan solution showed intermediate effects. Propolis and green tea toothpaste were not effective. Three articles presented a high risk of bias and 6, low risk. The cleansers that showed the highest antimicrobial efficacy on Co-Cr alloy were 0.12% chlorhexidine digluconate and NitrAdine and can be safely used on RPD framework.

Potential applications of green-synthesized iron oxide NPs for environmental remediation.

Water pollution is a significant issue worldwide due to an increase in anthropogenic activities. Heavy metals and dyes are among the most problematic contaminants that threaten the environment and negatively impact human health. Iron oxide nanoparticles (IONPs) synthesized using green methods have shown potential in these areas due to their significant adsorption capacity and photocatalytic potential. The size and morphology of biogenic IONPs can be tailored depending upon the concentration of the reducing medium and metal salt precursor. Green-synthesized IONPs have been found to be effective, economical, and environmentally friendly with their large surface area, making them suitable for removing toxic matter from contaminated water. Furthermore, they exhibit antibacterial potential against harmful microorganisms. The study emphasizes the importance of using such environmentally friendly tools to remove heavy metal ions and organic compounds from contaminated water. The underlying mechanism for the adsorption of heavy metal ions, photocatalytic degradation of organic compounds, and antimicrobial action has been explored in detail. The future prospective for the beneficial utilization of biogenic IONPs has also been signified to provide a detailed overview.

Avaliação antimicrobiana de uma resina Bulk Fill Fluida com inserção do xilitol / Antimicrobial evaluation of a Fluid Bulk Fill resin with xylitol insertion

Introdução: As resinas Bulk Fill apresentam uma boa procura pelos profissionais, pois o seu uso diminui o tempo clínico, como também a melhora qualidade das restaurações, porém não possuem atividade antibacteriana, sendo um dos fatores que ainda causam impacto negativo na vida das pessoas. A biomodificação com o xilitol tem o sentido de produzir ação microbiana e com isso aperfeiçoar as suas características clínicas. Objetivo: Avaliar a ação antimicrobiana de uma resina Bulk Fill flow após a inserção do xilitol. Metodologia: A resina Tetric® N-Flow Bulk Fill foi misturada às concentrações de xilitol (0% [Controle], 2,5% e 5% p/p). Amostras cilíndricas (n=5 do grupo controle e n=3 dos demais grupos experimentais) foram confeccionadas em moldes acrílicos de diâmetro de 2mm espessura, fotoativadas por 10s e armazenadas a 37ºC por 24h. Os espécimes foram esterilizados por luz ultravioleta por 20 minutos antes de serem acomodadas em uma placa de 48 poços estéril, sendo adicionado em cada poço 0,5mL de caldo Mueller Hinton. Então, adicionou-se 50µL do inóculo de S. mutans nos poços correspondentes. A placa foi incubada a 37 ± 1 ˚C durante 48 horas. Após o período de incubação, os espécimes foram gentilmente removidos e o crescimento microbiano foi indicado pela adição de 100µL da solução aquosa de resazurina (SigmaAldrich) a 0,01% com a posterior incubação a 37 ± 1 ˚C por duas horas. Micro-organismos viáveis reduzem o corante mudando sua coloração azul para rosa e a CIM foi definida como a menor concentração da substância que inibiu a mudança de coloração da resazurina. Em um poço contendo o grupo controle foi acrescentado clorexidina a 0,12% com o intuito de comparar o resultado gerado dos grupos testes. Resultado: Não houve inibição do crescimento bacteriano nos poços com inóculos que continham S. mutans e corpo de prova de resina acrescida de xilitol. Conclusão: Esse estudo mostrou que o acréscimo de 2,5% e 5% de Xilitol à resina Tetric® N-Flow Bulk Fill não apresentou inibição do crescimento bacteriano (AU).

Introduction: Bulk Fill resins are in good demand among professionals, as their use reduces clinical time and improves the quality of restorations, but they do not have antibacterial activity, which is one of the factors that still hurt people's lives. Biomodification with xylitol aims to improve its clinical characteristics. Objective: To evaluate the antimicrobial action of a Bulk Fill flow resin after inserting xylitol. Methodology: Tetric® N-Flow Bulk Fill resin was mixed with xylitol concentrations (0% [Control], 2.5% and 5% w/w). Cylindrical samples (n=5 from the control group and n=3 from the other groups) were made in acrylic molds with a diameter of 2 mm thick, light-cured for 10 s and stored at 37ºC for 24h. The specimens were sterilized by ultraviolet light for 20 minutes before being placed in a sterile 48-well plate, with 0.5 mL of Mueller Hinton broth added to each well. The plate was incubated at 37 ± 1 ˚C for 48 hours. After the incubation period, the specimens were gently removed, and microbial growth was indicated by adding 100 µL of 0.01% resazurin aqueous solution with subsequent incubation at 37 ± 1 ˚C for two hours. Viable microorganisms reduce the dye, changing its color from blue to pink. The MIC was defined as the lowest concentration of the substance that inhibited the color change of resazurin. In 0.12%, chlorhexidine was added to a well containing the control group to compare the results generated from the test groups. Result: There was no inhibition of bacterial growth in the wells with inocula containing S. mutans and the resin specimen with xylitol added. Conclusion: This study showed that adding 2.5% and 5% Xylitol to the Tetric® N-Flow Bulk Fill resin did not inhibit bacterial growth (AU).

Antimicrobial efficacy of Kerr pulp canal sealer (EWT) in combination with 10% amoxicillin on Enterococcus faecalis: A confocal laser scanning microscopic study.

Background: Sealers with antimicrobial properties play an important role in endodontic therapy success especially against Enterococcus faecalis infection found in failed root canal therapy. Addition of antibiotic agents to endodontic sealers may show significant increase in their antibacterial properties both against anaerobic and aerobic microbes. The purpose of the present study was to evaluate antimicrobial efficacy of Kerr pulp canal sealer (EWT) in combination with 10% amoxicillin against E. faecalis and post-root canal treatment viability of Enterococcus faecalis on the first and seventh day. Methods: A total of 60 extracted human mandibular premolar teeth were decoronated after initial decontamination with 1% NaOCl. Root length standardized to 12 mm. Canal instrumentation was done using ProTaper Universal file system till size F2 using 5.25% NaOCl. It was then infected with a pure strain of E. faecalis for a period of four days. Obturation was done using plain sealer, (n=30) and sealer-antibiotic combination, (n=30). Half of the teeth were sectioned at 24 hours (S, SA) and other half were sectioned seven days after obturation (S7, SA7). All samples were stained with SYTO9 and propidium iodide for imaging under Confocal Laser Scanning microscope. Statistical analysis was performed with the statistical software SPSS v. 17.0 (SPSS for Windows; SPSS Inc, Chicago, IL). Data was analysed using One Way ANOVA and post hoc Tukey test to determine statistical significance with p value < 0.01 considered significant. Results: Statistically significant differences were observed in green to red ratio between group S (9.561976) and S7 (0.435418) (p < 0.01). There was no difference found between SA (mean of green to red ratio, (0.70431) and SA7 (mean of green to red ratio, 0.85184). Conclusions: Antibiotics added to the sealer effectively eradicated of E. faecalis 24 hours post-obturation. However, after seven days, plain sealer was as effective as sealer-antibiotic combination.

Inhibitory-like Substances Produced by Yeasts Isolated from Andean Blueberries: Prospective Food Antimicrobials.

Natural agents from microorganisms have emerged as suitable options to replace chemical preservatives in foods. In this study, the antibacterial activity of cell-free supernatant (CFS) from five native yeasts (Saccharomyces cerevisiae Lev6 and Lev30, C. pseudointermedia Lev8, Candida intermedia Lev9, C. parapsilosis Lev15) and the reference S. boulardi SSB, was evaluated against some indicator food pathogens. The generation of antimicrobials was reliant on strain-, and sugar-supplemented media, which supported yeast growth established at 30 °C and 200 rpm for 48 h. Treatment with proteinase K and catalase was unable to completely abolish the inhibitory effect, indicating that the active components are likely complex combinations of acids, proteins, hydrogen peroxide, and other metabolites. Although there was no impact on Listeria monocytogenes, exposure to CFS and extracellular fractions obtained through precipitation with methanol (PPm) at 120 °C for 60 min significantly (p < 0.05) increased the inhibitory activity against Escherichia coli, Salmonella enterica, Kosakonia cowanii, and Staphylococcus aureus, indicating that the inhibitory activity was stimulated by heat. Likewise, a synergistic inhibitory action against Listeria was obtained following the pretreatment of PPm with EDTA (ethylenediaminetetraacetic acid). These activities were yeast strain-dependent, with Lev6, Lev8, and Lev30 showing the highest activity. In addition, a heat-stable low-molecular-mass molecule under 5 kDa was detected in Lev30. Further research is required to evaluate the mode of action and characterize the composition of the released molecules in the CFS in order to develop a novel biocontrol agent based on yeasts.

Combating Microbial Infections Using Metal-Based Nanoparticles as Potential Therapeutic Alternatives.

The nature of microorganisms and the efficiency of antimicrobials have witnessed a huge co-dependent change in their dynamics over the last few decades. On the other side, metals and metallic compounds have gained popularity owing to their effectiveness against various microbial strains. A structured search of both research and review papers was conducted via different electronic databases, such as PubMed, Bentham, Springer, and Science Direct, among others, for the present review. Along with these, marketed products, patents, and Clinicaltrials.gov were also referred to for our review. Different microbes such as bacteria, fungi, etc., and their diverse species and strains have been reviewed and found to be sensitive to metal-carrying formulations. The products are observed to restrict growth, multiplication, and biofilm formation effectively and adequately. Silver has an apt use in this area of treatment and recovery, and other metals like copper, gold, iron, and gallium have also been observed to generate antimicrobial activity. The present review identified membrane disruption, oxidative stress, and interaction with proteins and enzymes to be the primary microbicidal processes. Elaborating the action, nanoparticles and nanosystems are shown to work in our favor in well excelled and rational ways.

The Antibacterial and Antifungal Capacity of Eight Commercially Available Types of Mouthwash against Oral Microorganisms: An In Vitro Study.

This work aimed to evaluate and compare the antimicrobial actions and effects over time of eight types of mouthwash, based on the impact of chlorhexidine on the main microorganisms that are responsible for oral diseases: Enterococcus faecalis, Pseudomonas aeruginosa, and Candida albicans. The mouthwashes' antimicrobial action was determined in terms of their minimum inhibitory concentration (MIC), minimum bactericidal/fungicidal concentration (MBC/MFC), and time-kill curves at different contact times (10 s, 30 s, 60 s, 5 min, 15 min, 30 min, and 60 min), against selected oral microorganisms. All the mouthwashes showed a notable effect against C. albicans (MICs ranging from 0.02% to 0.09%), and higher MIC values were recorded with P. aeruginosa (1.56% to >50%). In general, the mouthwashes showed similar antimicrobial effects at reduced contact times (10, 30, and 60 s) against all the tested microorganisms, except with P. aeruginosa, for which the most significant effect was observed with a long time (15, 30, and 60 min). The results demonstrate significant differences in the antimicrobial actions of the tested mouthwashes, although all contained chlorhexidine and most of them also contained cetylpyridinium chloride. The relevant antimicrobial effects of all the tested mouthwashes, and those with the best higher antimicrobial action, were recorded by A-GUM® PAROEX®A and B-GUM® PAROEX®, considering their effects against the resistant microorganisms and their MIC values.

Promising Antimicrobial Action of Sustained Released Curcumin-Loaded Silica Nanoparticles against Clinically Isolated Porphyromonas gingivalis.

BACKGROUND: Porphyromonas gingivalis (P. gingivalis) has always been one of the leading causes of periodontal disease, and antibiotics are commonly used to control it. Numerous side effects of synthetic drugs, as well as the spread of drug resistance, have led to a tendency toward using natural antimicrobials, such as curcumin. The present study aimed to prepare and physicochemically characterize curcumin-loaded silica nanoparticles and to detect their antimicrobial effects on P. gingivalis. METHODS: Curcumin-loaded silica nanoparticles were prepared using the chemical precipitation method and then were characterized using conventional methods (properties such as the particle size, drug loading percentage, and release pattern). P. gingivalis was isolated from one patient with chronic periodontal diseases. The patient's gingival crevice fluid was sampled using sterile filter paper and was transferred to the microbiology laboratory in less than 30 min. The disk diffusion method was used to determine the sensitivity of clinically isolated P. gingivalis to curcumin-loaded silica nanoparticles. SPSS software, version 20, was used to compare the data between groups with a p value of <0.05 as the level of significance. Then, one-way ANOVA testing was utilized to compare the groups. RESULTS: The curcumin-loaded silica nanoparticles showed a nanometric size and a drug loading percentage of 68% for curcumin. The nanoparticles had a mesoporous structure and rod-shaped morphology. They showed a relatively rapid release pattern in the first 5 days. The release of the drug from the nanoparticles continued slowly until the 45th day. The results of in vitro antimicrobial tests showed that P. gingivalis was sensitive to the curcumin-loaded silica nanoparticles at concentrations of 50, 25, 12.5, and 6.25 µg/mL. One-way ANOVA showed that there was a significant difference between the mean growth inhibition zone, and the concentration of 50 µg/mL showed the highest inhibition zone (p ≤ 0.05). CONCLUSION: Based on the obtained results, it can be concluded that the local nanocurcumin application for periodontal disease and implant-related infections can be considered a promising method for the near future in dentistry.

Antibacterial Aloe vera Based Biocompatible Hydrogel for Use in Dermatological Applications.

The present research aims to describe a new methodology to obtain biocompatible hydrogels based on Aloe vera used for wound healing applications. The properties of two hydrogels (differing in Aloe vera concentration, AV5 and AV10) prepared by an all-green synthesis method from raw, natural, renewable and bioavailable materials such as salicylic acid, allantoin and xanthan gum were investigated. The morphology of the Aloe vera based hydrogel biomaterials was studied by SEM analysis. The rheological properties of the hydrogels, as well as their cell viability, biocompatibility and cytotoxicity, were determined. The antibacterial activity of Aloe vera based hydrogels was evaluated both on Gram-positive, Staphylococcus aureus and on Gram-negative, Pseudomonas aeruginosa strains. The obtained novel green Aloe vera based hydrogels showed good antibacterial properties. In vitro scratch assay demonstrated the capacity of both AV5 and AV10 hydrogels to accelerate cell proliferation and migration and induce closure of a wounded area. A corroboration of all morphological, rheological, cytocompatibility and cell viability results indicates that this Aloe vera based hydrogel may be suitable for wound healing applications.

Centella asiatica and Its Metabolite Asiatic Acid: Wound Healing Effects and Therapeutic Potential.

An intense effort has been focused on new therapeutic approaches and the development of technologies for more efficient and rapid wound healing. The research for plants used for long time in traditional medicine in the treatment of wound has become a promising strategy to obtain drugs therapeutically useful in the acute and chronic wound management. In this context, Centella asiatica (Apiaceae) has been used to treat a variety of skin diseases, such as leprosy, lupus, varicose ulcers, eczema and psoriasis, in Asiatic traditional medicine for thousands of years. Studies have shown that Centella asiatica extracts (CAE) display activity in tissue regeneration, cell migration and wound repair process by promoting fibroblast proliferation and collagen synthesis. Preliminary findings have shown that the asiatic acid is one of the main active constituents of C. asiatica, directly associated with its healing activity. Thus, this study discusses aspects of the effects of Centella asiatica and its active component, asiatic acid, in different stages of the healing process of cutaneous wounds, including phytochemical and antimicrobial aspects that contribute to its therapeutic potential.