Bidentate Coordination Enables Anions-Regulated Solvation Structure for Advanced Aqueous Zinc Metal Batteries.

Rechargeable aqueous Zn metal batteries (AZMBs) are attractive for stationary energy storage due to their low cost and high safety. However, their practical application is hindered by the excessive use of zinc anodes and poor high-temperature performance, caused by severe side reactions and dendritic growth issues. Here, an electrolyte design strategy is reported based on bidentate coordination of Zn2+ and solvent to tailor the solvation structure. The triethylene glycol (TEG) co-solvent with two-oxygen coordination sites is demonstrated to facilitate the formation of an anions-involved solvation shell, greatly reducing the activity of coordinated H2O molecules. The sequential reduction of OTF- anions and TEG to form an organic-inorganic bilayer SEI (hydrophobic organic layer and high ion conductivity inorganic layer), protecting Zn anodes from side reaction and dendrite growth, thus ensuring an unprecedented Zn reversibility (99.95% over 5000 cycles at 0.5 mA cm-2). More importantly, the full cells of Zn||V2O5 exhibit a record-high cumulative capacity (2552 mAh cm-2) under a lean electrolyte condition (E/C ratio = 15 µL mAh-1), a limited Zn supply (N/P ratio = 1.9) and a high areal capacity (3.0 mAh cm-2).

Dipole Moment Dictates the Preferential Immobilization in Gel Electrolytes for Ah-level Aqueous Zinc-Metal Batteries.

Aqueous Zn-metal batteries are of great interest due to their high material abundance, low production cost, and excellent safety. However, they suffer from severe side reactions and notorious dendrite growth closely related to electrolytes. Here, in-situ generated zwitterionic polymers are used as gel electrolytes to overcome these problems. It is shown that anions and H2O, but not anions and cations, are preferentially immobilized at different sites of zwitterionic polymers, facilitating the free migration of Zn2+ and reducing the side reactions. This immobilization can be associated with the dipole moment of zwitterionic polymers. As a result, poly[3-dimethyl(methacryloyl oxyethyl) ammonium propane sulfonate] (PDMAPS) stands out from a series of zwitterionic polymers and outperforms the other candidates in electrochemical performance. The symmetric cells using PDMAPS smoothly operate ~9000 h at 0.5 mA cm-2 for 0.5 mAh cm-2, much better than the controls. Moreover, PDMAPS enables an Ah-level pouch cell for continuous cycling. These results not only benefit the rational molecular design of advanced electrolytes, but also demonstrate the promising potential of zwitterionic polymers in aqueous Zn-metal batteries.

Mastering Proton Activities in Aqueous Batteries.

Advanced aqueous batteries are promising solutions for grid energy storage. Compared with their organic counterparts, water-based electrolytes enable fast transport kinetics, high safety, low cost, and enhanced environmental sustainability. However, the presence of protons in the electrolyte, generated by the spontaneous ionization of water, may compete with the main charge-storage mechanism, trigger unwanted side reactions, and accelerate the deterioration of the cell performance. Therefore, it is of pivotal importance to understand and master the proton activities in aqueous batteries. This Perspective comments on the following scientific questions: Why are proton activities relevant? What are proton activities? What do we know about proton activities in aqueous batteries? How do we better understand, control, and utilize proton activities?

High-Energy Aqueous S-MnO2 Batteries with Redox Charge Carriers.

The energy densities of conventional aqueous batteries are often unsatisfactory due to the limited capacities of electrode materials. Therefore, the design of creative aqueous batteries has to be considered. Herein, aqueous S-MnO2 batteries are constructed by matching S/Cu2S redox couples and MnO2 deposition/dissolution. In such batteries, S/Cu2S redox couples undergo the solid-solid conversion reaction with four-electron transfer, ensuring a high specific capacity of 2220 mAh g-1 in S anodes. Furthermore, the conversion reaction of S/Cu2S redox couples can take place stably in acidic electrolyte that is essential for the MnO2 deposition/dissolution. As a result, the S/Cu2S redox couples can match MnO2 deposition/dissolution well, which endow the batteries with a membrane-free configuration. As a proof of concept, Ah-level prismatic and single-flow batteries were assembled and could operate stably for over 1000 h, demonstrating their great potential for large-scale energy storage. This work broadens the horizons of aqueous batteries beyond metal-manganese chemistry.

Improvements and Challenges of Hydrogel Polymer Electrolytes for Advanced Zinc Anodes in Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries (AZIBs) are widely regarded as desirable energy storage devices due to their inherent safety and low cost. Hydrogel polymer electrolytes (HPEs) are cross-linked polymers filled with water and zinc salts. They are not only widely used in flexible batteries but also represent an ideal electrolyte candidate for addressing the issues associated with the Zn anode, including dendrite formation and side reactions. In HPEs, an abundance of hydrophilic groups can form strong hydrogen bonds with water molecules, reducing water activity and inhibiting water decomposition. At the same time, special Zn2+ transport channels can be constructed in HPEs to homogenize the Zn2+ flux and promote uniform Zn deposition. However, HPEs still face issues in practical applications, including poor ionic conductivity, low mechanical strength, poor interface stability, and narrow electrochemical stability windows. This Review discusses the issues associated with HPEs for advanced AZIBs, and the recent progresses are summarized. Finally, the Review outlines the opportunities and challenges for achieving high performance HPEs, facilitating the utilization of HPEs in AZIBs.

Capitalizing on the Iodometric Reaction for Energetic Aqueous Energy Storage.

Iodometric and iodimetric titrations represent a prevailing technique to determine the concentration of Cu2+ ions in aqueous solutions; However, their utilization in electrochemical energy storage has been overlooked due to the poor reversibility between CuI and Cu2+ related to the shuttling effect of I3- species. In this work, we developed a 4A zeolite separator capable of suppressing the free shuttling of I3- ions, thus achieving a record-high capacity retention of 95.7% upon 600 cycles. Theoretical and experimental studies reveal that the negatively charged zeolite can effectively impede the approach and penetration of I3- ions, as a result of electrostatic interaction between them. To explore the practical potential, a hybrid cell of Zn∥I2 consisting of Cu2+ redox agent has been assembled with a discharge capacity of 356 mA h g-1. The cell affords a specific energy of 443 W h kg-1 based on I2, or 193 W h kg-1 based on both electrodes. This work offers insight on the energy utilization of the iodometric reactions and advocates a Cu2+-mediated cell design that could potentially double the capacity and energy of conventional aqueous battery systems.

Regulation of Zn2+ Solvation Configuration in Aqueous Batteries via Selenium-Substituted Crown Ether Engineering.

The efficient utilization of the metallic Zn in rechargeable aqueous Zn-ion batteries (RAZBs) struggle to suffer from parasitic Zn dendrite formation, hydrogen evolution reactions as well as severe interfacial degradation at high areal capacity loadings. This study thus proposes to employ the modified crown ether as an aqueous electrolyte additive to regulate the Zn2+ desolvation kinetic and facilitates the horizontally oriented (002) deposition of Zn, extending the lifespan of both the symmetric cell and full cell models. Specifically, zincophilic cyano and hydrophobic selenium atoms are incorporated into the crown ether supramolecule to enhance Zn2+ coordination and desolvation capability. The addition of 4-cyanobenzo-21-crown-7-selenium at a low concentration of 0.5 wt.% effectively mitigates hydrogen evolution and Zn corrosion caused by water, promoting the oriented deposition of Zn2+. The Zn||V2O5 full cell prototype, assembled with the areal capacity loadings of 2 mAh cm-2 and N/P ratio of 2.95, exhibits negligible capacity fading at 2.0A g-1 for 300 cycles, highlighting the commercial feasibility of supramolecular macrocycles additive for practical RAZBs applications.

Insight into Anionic Discrepancies in Bipolar Poly(Thionine) Organic Cathodes for Aqueous Zinc Ion Batteries.

Electroactive organic electrode materials exhibit remarkable potential in aqueous zinc ion batteries (AZIBs) due to their abundant availability, customizable structures, sustainability, and high reversibility. However, the research on AZIBs has predominantly concentrated on unraveling the storage mechanism of zinc cations, often neglecting the significance of anions in this regard. Herein, bipolar poly(thionine) is synthesized by a simple and efficient polymerization reaction, and the kinetics of different anions are investigated using poly(thionine) as the cathode of AZIBs. Notably, poly(thionine) is a bipolar organic polymer electrode material and exhibits enhanced stability in aqueous solutions compared to thionine monomers. Kinetic analysis reveals that ClO4 - exhibits the fastest kinetics among SO4 2-, Cl-, and OTF-, demonstrating excellent rate performance (109 mAh g-1 @ 0.5 A g-1 and 92 mAh g-1 @ 20 A g-1). Mechanism studies reveal that the poly(thionine) cathode facilitates the co-storage of both anions and cations in Zn(ClO4)2. Furthermore, the lower electrostatic potential of ClO4 - influences the strength of hydrogen bonding with water molecules, thereby enhancing the overall kinetics in aqueous electrolytes. This work provides an effective strategy for synthesizing high-quality organic materials and offers new insights into the kinetic behavior of anions in AZIBs.

In Situ Visualization of Ion Transport Processes in Aqueous Batteries.

Aqueous rechargeable batteries are regarded as one of the most reliable solutions for electrochemical energy storage, and ion (e.g., H+ or OH-) transport is essential for their electrochemical performance. However, modeling and numerical simulations often fall short of depicting the actual ion transport characteristics due to deviations in model assumptions from reality. Experimental methods, including laser interferometry, Raman, and nuclear magnetic resonance imaging, are limited by the complexity of the system and the restricted detection of ions, making it difficult to detect specific ions such as H+ and OH-. Herein, in situ visualization of ion transport is achieved by innovatively introducing laser scanning confocal microscopy. Taking neutral Zn-air batteries as an example and using a pH-sensitive probe, real-time dynamic pH changes associated with ion transport processes are observed during battery operation. The results show that after immersion in the zinc sulfate electrolyte, the pH near the Zn electrode changes significantly and pulsation occurs, which demonstrates the intense self-corrosion hydrogen evolution reaction and the periodic change in the reaction intensity. In contrast, the change in the pH of the galvanized electrode plate is weak, proving its significant corrosion inhibition effect. For the air electrode, the heterogeneity of ion transport during the discharging and charging process is presented. With an increase of the current density, the ion transport characteristics gradually evolve from diffusion dominance to convection-diffusion codominance, revealing the importance of convection in the ion transport process inside batteries. This method opens up a new approach of studying ion transport inside batteries, guiding the design for performance enhancement.

Rescue of dead MnO2 for stable electrolytic Zn-Mn redox-flow battery: a metric of mediated and catalytic kinetics.

The virtues of electrolytic MnO2 aqueous batteries are high theoretical energy density, affordability and safety. However, the continuous dead MnO2 and unstable Mn2+/MnO2 electrolysis pose challenges to the practical output energy and lifespan. Herein, we demonstrate bifunctional cationic redox mediation and catalysis kinetics metrics to rescue dead MnO2 and construct a stable and fast electrolytic Zn-Mn redox-flow battery (eZMRFB). Spectroscopic characterizations and electrochemical evaluation reveal the superior mediation kinetics of a cationic Fe2+ redox mediator compared with the anionic ones (e.g. I- and Br-), thus eliminating dead MnO2 effectively. With intensified oxygen vacancies, density functional theory simulations of the reaction pathways further verify the concomitant Fe-catalysed Mn2+/MnO2 electrolysis kinetics via charge delocalization and activated O 2p electron states, boosting its rate capability. As a result, the elaborated eZMRFB achieves a coulombic efficiency of nearly 100%, ultra-high areal capacity of 80 mAh cm-2, rate capability of 20 C and a long lifespan of 2500 cycles. This work may advance high-energy aqueous batteries to next-generation scalable energy storage.

A Long-Range Planar Polymer with Efficient π-Electron Delocalization for Superior Proton Storage.

Due to the unique "Grotthus mechanism", aqueous proton batteries (APBs) are promising energy devices with intrinsic safety and sustainability. Although polymers with tunable molecular structures are ideal electrode materials, their unsatisfactory proton-storage redox behaviors hinder the practical application in APB devices. Herein, a novel planar phenazine (PPHZ) polymer with a robust and extended imine-rich skeleton is synthesized and used for APB application for the first time. The long-range planar configuration achieves ordered molecular stacking and reduced conformational disorder, while the high conjugation with strong π-electron delocalization optimizes energy bandgap and electronic properties, enabling the polymer with low proton diffusion barriers, high redox activity, and superior electron affinity. As such, the PPHZ polymer as an electrode material exhibits fast, stable, and unrivaled proton-storage redox behaviors with a large capacity of 273.3 mAh g-1 at 0.5 A g-1 (1 C) in 1 M H2SO4 electrolyte, which is the highest value among proton-inserted electrodes in aqueous acidic electrolytes. Dynamic in situ techniques confirm the high redox reversibility upon proton uptake/removal, and the corresponding protonation pathways are elucidated by theoretical calculations. Moreover, a pouch-type APB cell using PPHZ electrode exhibits an ultralong lifespan over 30 000 cycles, further verifying its promising application prospect.

MXene Supported Electrodeposition Engineering of Layer Double Hydroxide for Alkaline Zinc Batteries.

The main challenges faced by aqueous rechargeable nickel-zinc batteries are their comparatively low energy density and poor cycling stability. Moreover, the preparation procedures of these cathodes are complex and not easily scalable. Herein, we utilized MXene to improve the electrodeposition preparation of NiCo layered double hydroxides (LDH). Benefiting from the improved interfacial contact between nickel foam (NF) and platting solution and the enhanced ionic conductivity of platting product based on MXene additives, the resulting binder-free NiCo LDH electrode can achieve ultrahigh areal loading (~65 mg cm-2) with abundant active surface for redox reactions and maintained short transport pathway for ion diffusion and charge transfer. Furthermore, the as-fabricated alkaline NiCo LDH-based battery delivers high discharge capacity, up to 20.2 mAh cm-2 (311 mAh g-1), accompanied by remarkable rate performance (9.6 mAh cm-2 or 148 mAh g-1 at 120 mA cm-2). Due to the high structural and chemical stability of MXenes/LDH-based electrode, excellent cycling life can also be achieved with 88.6% capacity retention after 10000 cycles. In addition, ultrahigh areal energy density (31.2 mWh cm-2) and gravimetric energy density (465 Wh kg-1) can be simultaneously achieved. This work has inspired the design of advanced cathode materials to develop high-performance aqueous zinc batteries.

Formulating Self-repairing Solid Electrolyte Interface via Dynamic Electric Double Layer for Practical Zinc ion Batteries.

Zinc ion batteries (ZIBs) encounter interface issues stemming from the water-rich electrical double layer (EDL) and unstable solid-electrolyte interphase (SEI). Herein, we propose the dynamic EDL and self-repairing hybrid SEI for practical ZIBs via incorporating the horizontally-oriented dual-site additive. The rearrangement of distribution and molecular configuration of additive constructs the robust dynamic EDL under different interface charges. And, a self-repairing organic-inorganic hybrid SEI is constructed via the electrochemical decomposition of additive. The dynamic EDL and self-repairing SEI accelerate interfacial kinetics, regulate deposition and suppress side reactions in the both stripping and plating during long-term cycles, which affords high reversibility for 500 h at 42.7% depth of discharge or 50 mA·cm-1. Remarkably, Zn//NVO full cells deliver the impressive cycling stability for 10000 cycles with 100% capacity retention at 3 A·g-1 and for over 3000 cycles even at lean electrolyte (7.5 µL·mAh-1) and high loading (15.26 mg·cm-2). Moreover, effectiveness of this strategy is further demonstrated in the low-temperature full cell (-30 oC).

Electrode and Electrolyte Co-Energy-Storage Electrochemistry Enables High-Energy Zn-S Decoupled Batteries.

In the search for next-generation green energy storage solutions, Cu-S electrochemistry has recently gained attraction from the battery community owing to its affordability and exceptionally high specific capacity of 3350 mAh gs -1. However, the inferior conductivity and substantial volume expansion of the S cathode hinder its cycling stability, while the low output voltage limits its energy density. Herein, a hollow carbon sphere (HCS) is synthesized as a 3D conductive host to achieve a stable S@HCS cathode, which enables an outstanding cycling performance of 2500 cycles (over 9 months). To address the latter, a Zn//S@HCS alkaline-acid decoupled cell is configured to increase the output voltage from 0.18 to 1.6 V. Moreover, an electrode and electrolyte co-energy storage mechanism is proposed to offset the reduction in energy density resulting from the extra electrolyte required in Zn//S decoupled cells. When combined, the Zn//S@HCS alkaline-acid decoupled cell delivers a record energy density of 334 Wh kg-1 based on the mass of the S cathode and CuSO4 electrolyte. This work tackles the key challenges of Cu-S electrochemistry and brings new insights into the rational design of decoupled batteries.

Switching Hydrophobic Interface with Ionic Valves for Reversible Zinc Batteries.

Developing hydrophobic interface has proven effective in addressing dendrite growth and side reactions during zinc (Zn) plating in aqueous Zn batteries. However, this solution inadvertently impedes the solvation of Zn2+ with H2O and subsequent ionic transport during Zn stripping, leading to insufficient reversibility. Herein, an adaptive hydrophobic interface that can be switched "on" and "off" by ionic valves to accommodate the varying demands for interfacial H2O during both the Zn plating and stripping processes, is proposed. This concept is validated using octyltrimethyl ammonium bromide (C8TAB) as the ionic valve, which can initiatively establish and remove a hydrophobic interface in response to distinct electric-field directions during Zn plating and stripping, respectively. Consequently, the Zn anode exhibits an extended cycling life of over 2500 h with a high Coulombic efficiency of ≈99.8%. The full cells also show impressive capacity retention of over 85% after 1 000 cycles at 5 A g-1. These findings provide a new insight into interface design for aqueous metal batteries.

Water-in-Salt Gel Biopolymer Electrolytes for Flexible and Wearable Zn/Alkali Metal Dual-Ion Batteries.

Zn/alkali metal dual-ion batteries (ZM DIBs) with highly concentrated water-in-salt (WiS) electrolytes are promising next-generation energy storage systems. This enhanced design of Zn-ion rechargeable batteries offers intrinsic safety, high operating voltage, satisfactory capacity, and outstanding cyclic stability. Herein, taking the concept of highly concentrated electrolytes one step further, we introduce water-in-salt gel biopolymer electrolytes (WiS-GBEs) by encapsulating Zn/Li or Zn/Na bisalt compositions in a cellulose membrane. WiS-GBEs inherit the electrochemical merits of highly concentrated electrolytes (i.e., wide voltage window, high ionic conductivity, etc.) and excellent durability of gel biopolymer structures. Both types of WiS-GBEs apply to coin- and pouch-cell compartments of ZM DIBs, offering a high plateau voltage (>1.8 V vs. Zn2+/Zn), good and reversible capacity (118 and 57 mAh g-1 for Zn/Li and Zn/Na cells, respectively), and outstanding cycling stability (more than 90% after 1,000 cycles). Essentially, the pouch cells with WiS-GBEs present superior durability, flexibility, and capacity endurance under various bending stress conditions (90% capacity retention under 0-180° bending modes), indicating their potential capability to power wearable electronics. The practical powering ability of Li- and Na-based pouch systems is demonstrated by the example of a wearable digital timer.

Stable Zinc Electrode Reaction Enabled by Combined Cationic and Anionic Electrolyte Additives for Non-Flow Aqueous Zn─Br2 Batteries.

Aqueous zinc-bromine batteries hold immense promise for large-scale energy storage systems due to their inherent safety and high energy density. However, achieving a reliable zinc metal electrode reaction is challenging because zinc metal in the aqueous electrolyte inevitably leads to dendrite growth and related side reactions, resulting in rapid capacity fading. Here, it is reported that combined cationic and anionic additives in the electrolytes using CeCl3 can simultaneously address the multiple chronic issues of the zinc metal electrode. Trivalent Ce3+ forms an electrostatic shielding layer to prevent Zn2+ from concentrating at zinc metal protrusions, while the high electron-donating nature of Cl- mitigates H2O decomposition on the zinc metal surface by reducing the interaction between Zn2+ and H2O. These combined cationic and anionic effects significantly enhance the reversibility of the zinc metal reaction, allowing the non-flow aqueous Zn─Br2 full-cell to reliably cycle with exceptionally high capacity (>400 mAh after 5000 cycles) even in a large-scale battery configuration of 15 × 15 cm2.

Thiosalicylic-Acid-Mediated Coordination Structure of Nickel Center via Thermodynamic Modulation for Aqueous Ni-Zn Batteries.

Uniquely functional nanocomplexes with rich coordination environments are critical in energy storage. However, the construction of structurally versatile nanocomplexes remains challenging. In this study, a nickel-based complex with structural variations is designed via thermodynamic modulation using a dual-ligand synthesis strategy. A nickel-based nanomaterial (NiSA-SSA-160) with a large specific surface area is synthesized around the competing coordination of the host and guest molecules that differ in terms of the chemical properties of the O and S elements. Concurrently, the coordination environment of NiSA-SSA-160 is investigated via X-ray absorption fine structure spectroscopy. The thiol functional groups synergistically induced an electron-rich Ni structure, thus increasing the electron density of the central atom. The electrochemical performance of an assembled NiSA-SSA-160//Zn@CC battery is shown to improve significantly, with a maximum energy density of 0.54 mWh cm-2 and a peak power density of 49.49 mW cm-2. This study provides a new perspective regarding coordination transformations and offers an idea for the design of functionally rich nanomaterials.

Coupling High Hardness and Zn Affinity in Amorphous-Crystalline Diamond for Stable Zn Metal Anodes.

The highly reversible plating/stripping of Zn is plagued by dendrite growth and side reactions on metallic Zn anodes, retarding the commercial application of aqueous Zn-ion batteries. Herein, a distinctive nano dual-phase diamond (NDPD) comprised of an amorphous-crystalline heterostructure is developed to regulate Zn deposition and mechanically block dendrite growth. The rich amorphous-crystalline heterointerfaces in the NDPD endow modified Zn anodes with enhanced Zn affinity and result in homogeneous nucleation. In addition, the unparalleled hardness of the NDPD effectively overcomes the high growth stress of dendrites and mechanically impedes their proliferation. Moreover, the hydrophobic surfaces of the NDPD facilitate the desolvation of hydrate Zn2+ and prevent water-mediated side reactions. Consequently, the Zn@NDPD presents an ultrastable lifespan exceeding 3200 h at 5 mA cm-2 and 1 mAh cm-2. The practical application potential of Zn@NDPD is further demonstrated in full cells. This work exhibits the great significance of a chemical-mechanical synergistic anode modification strategy in constructing high-performance aqueous Zn-ion batteries.

Harnessing Ion-Dipole Interactions for Water-Lean Solvation Chemistry: Achieving High-Stability Zn Anodes in Aqueous Zinc-Ion Batteries.

The reversibility and stability of aqueous zinc-ion batteries (AZIBs) are largely limited by water-induced interfacial parasitic reactions. Here, dimethyl(3,3-difluoro-2-oxoheptyl)phosphonate (DP) is introduced to tailor primary solvation sheath and inner-Helmholtz configurations for robust zinc anode. Informed by theoretical guidance on solvation process, DP with high permanent dipole moments can effectively substitute the coordination of H2O with charge carriers through relatively strong ion-dipolar interactions, resulting in a water-lean environment of solvated Zn2+. Thus, interfacial side reactions can be suppressed through a shielding effect. Meanwhile, lone-pair electrons of oxygen and fluorinated features of DP also reinforce the interfacial affinity of metallic zinc, associated with exclusion of neighboring water to facilitate reversible zinc planarized deposition. Thus, these merits endow the Zn anode with a high-stability performance exceeds 3800 hours at 0.5 mA cm-2 and 0.5 mAh cm-2 for Zn||Zn batteries and a high average Coulombic efficiency of 99.8 % at 4 mA cm-2 and 1 mAh cm-2 for Zn||Cu batteries. Benefiting from the stable zinc anode, the Zn||NH4V4O10 cell maintains 80.3 % of initial discharge capacity after 3000 cycles at 5 A g-1 and exhibits a high retention rate of 99.4 % against to the initial capacity during the self-discharge characterizations.