Proximal sealing in the aortic arch for inner curve disease using the Custom Relay® Scalloped and Fenestrated stent graft.

OBJECTIVE: This study aims to analyze early and midterm results of custom-made proximal scallop and fenestrated stent-grafts for thoracic endovascular aortic repair (TEVAR) with proximal landing zone (PLZ) in the aortic arch. METHODS: All consecutive patients treated with the custom made proximal scalloped and fenestrated Relay stent grafts (Terumo Aortic Bolton Medical Inc., Sunrise, USA) in ten Italian centers between January 2014 and December 2022 were included. The primary endpoints were technical success, incidence of intraoperative major adverse events (MAEs), deployment accuracy, and rate of early neurological complications, endoleaks (Els) and retrograde aortic dissection. RESULTS: During the study period, 49 patients received TEVAR with Relay custom-made endograft in Italy were enrolled. The median patient age was 70.1 years (interquartile range, 23-86 years) and 65.3% were male. The indication for treatment was atherosclerotic aneurysms in 59.2% of cases and penetrating aortic ulcer in 22.4%. The endograft configuration was proximal fenestration in 55.1% and scallop in 44.9%. The PLZ was zone 0 in 25 cases (51%), zone 1 in 14 cases (28.6%), and zone 2 in 10 cases (20.4%). The supra-aortic debranching procedures were 38 (77.5%). Technical success was 97.9% (48/49) due to one case (2.0%) of inaccurate deployment. Intraoperatively, one (2.0%) type Ia and one (2.0%) type III Els were detected. There were no cases of in-hospital mortality, MAEs and retrograde dissection. Three (6.1%) minor strokes (National Institutes of Health Stroke Scale score≤4) were observed. At a mean follow-up time of 36.3 + 21.3 months the rate of type I-III Els and reintervention was 4.1%, respectively. Four patients (8.2%) died during the follow-up period, one (2.1%) from abdominal aortic rupture and three (6.1%) for non-aortic causes. CONCLUSIONS: Our early and midterm outcomes suggest that scalloped and fenestrated TEVAR may provide an acceptable alternative treatment option for aortic arch pathologies. Large-scale studies are needed to assess the long-term durability of this technique.

Multiple Major Aortopulmonary Collateral Arteries With Tetralogy of Fallot and Other Congenital Cardiac Disorders Detected in the Fourth Decade: A Report of a Rare Case.

The occurrence of MAPCAs (major aortopulmonary collateral arteries) with TOF (tetralogy of Fallot) and bilateral hypoplastic pulmonary arteries together is a rare condition. Patients are typically middle-aged men who usually present with acute signs of cardiac manifestations. The anomalies have survival up to the fourth decade of life and are fraught with clinical challenges. Additionally, various congenital syndromic associations, such as DiGeorge syndrome, are associated with these anomalies. We report an extremely rare case of a 41-year-old male who came with complaints of chest pain, dyspnea on exertion, and headaches. The patient had a previous history of tuberculosis and a rare combination of MAPCAs with TOF and bilateral hypoplastic pulmonary arteries, with a right-sided aortic arch with an aplastic left subclavian artery. The importance of the case comes from the need to perform surgery on a middle-aged male who was completely asymptomatic prior to this.

Machine learning-based model to predict severe acute kidney injury after total aortic arch replacement for acute type A aortic dissection.

Background: Severe acute kidney injury (AKI) after total aortic arch replacement (TAAR) is related to adverse outcomes in patients with acute type A aortic dissection (ATAAD). However, the early prediction of severe AKI remains a challenge. This study aimed to develop a novel model to predict severe AKI after TAAR in ATAAD patients using machine learning algorithms. Methods: A total of 572 ATAAD patients undergoing TAAR were enrolled in this retrospective study, and randomly divided into a training set (70 %) and a validation set (30 %). Lasso regression, support vector machine-recursive feature elimination and random forest algorithms were used to screen indicators for severe AKI (defined as AKI stage III) in the training set, respectively. Then the intersection indicators were selected to construct models through artificial neural network (ANN) and logistic regression. The AUC-ROC curve was employed to ascertain the prediction efficacy of the ANN and logistic regression models. Results: The incidence of severe AKI after TAAR was 22.9 % among ATAAD patients. The intersection predictors identified by different machine learning algorithms were baseline serum creatinine and ICU admission variables, including serum cystatin C, procalcitonin, aspartate transaminase, platelet, lactic dehydrogenase, urine N-acetyl-ß-d-glucosidase and Acute Physiology and Chronic Health Evaluation II score. The ANN model showed a higher AUC-ROC than logistic regression (0.938 vs 0.908, p < 0.05). Furthermore, the ANN model could predict 89.1 % of severe AKI cases beforehand. In the validation set, the superior performance of the ANN model was further confirmed in terms of discrimination ability (AUC = 0.916), calibration curve analysis and decision curve analysis. Conclusion: This study developed a novel and reliable clinical prediction model for severe AKI after TAAR in ATAAD patients using machine learning algorithms. Importantly, the ANN model showed a higher predictive ability for severe AKI than logistic regression.

Precranial artery calcification burden: a potential indicator of the clinical outcome of reperfusion in patients with acute large artery occlusion.

OBJECTIVE: With mechanical thrombectomy (MT), we investigated the prognostic importance of aortic arch calcification (AoAC) and carotid sinus calcification (CaSC) for symptomatic intracerebral hemorrhage (sICH) and poor outcome in acute large artery occlusion (LAO). METHODS: In this retrospective observational study, we calculated pre-cranial artery calcification burden (PACB) scores (burden score of AoAC and CaSC) using the AoAC grading scale score plus Woodcock visual score. The outcome measure was sICH per the European Cooperative Acute Stroke Study III definition. A 3-month modified Rankin scale score 3-6 was designated as poor outcome. RESULTS: Compared with patients who had PACB <3, those with PACB ≥3 showed substantially higher risks of sICH (odds ratio [OR] = 2.567, 95% confidence interval [CI] = 1.187-5.550) and poor outcome (OR = 4.777, 95% CI = 1.659-13.756). According to receiver operating characteristic (ROC) curves, adding PACB to the regression model enhanced the predictive value for poor outcome (area under the ROC curve [AUC]: 0.718 vs. 0.519, Z = 2.340) and in patients receiving MT (AUC: 0.714 vs. 0.584, Z = 2.021), independently. CONCLUSIONS: Factors related to PACB were consistent with common risk factors of systemic atherosclerosis. Low PACB scores indicated better prognosis. In patients with LAO following MT, PACB was useful in predicting sICH and poor clinical outcome.

Three-Dimensional Anthropometric Analysis of the Effect of Lip Reconstructive Surgery on Children with Cleft Lip and Palate at Three Different Times.

OBJECTIVES: This investigation aimed to assess the optimal timing for lip repair in children with cleft lip and palate via 3D anthropometric analysis to evaluate their maxillofacial structures. METHODS: The sample comprised 252 digitized dental models, divided into groups according to the following timing of lip repair: G1 (n = 50): 3 months; G2 (n = 50): 5 and 6 months; G3 (n = 26): 8 and 10 months. Models were evaluated at two-time points: T1: before lip repair; T2: at 5 years of age. Linear measurements, area, and Atack index were analyzed. RESULTS: At T1, the intergroup analysis revealed that G1 had statistically significant lower means of I-C', I-C, C-C', and the sum of the segment areas compared to G2 (p = 0.0140, p = 0.0082, p = 0.0004, p < 0.0001, respectively). In addition, there was a statistically significant difference when comparing the cleft area between G2 and G3 (p = 0.0346). At T2, the intergroup analysis revealed that G1 presented a statistically significant mean I-C' compared to G3 (p = 0.0461). In the I-CC' length analysis, G1 and G3 showed higher means when compared to G2 (p = 0.0039). The I-T' measurement was statistically higher in G1 than in G2 (p = 0.0251). In the intergroup growth rate analysis, G1 and G2 showed statistically significant differences in the I-C' measurement compared to G3 (p = 0.0003). In the analysis of the Atack index, there was a statistically significant difference between G1 and the other sample sets (p < 0.0001). CONCLUSION: Children who underwent surgery later showed better results in terms of the growth and development of the dental arches.

Influence of the transverse tarsal arch on radiological components of progressive collapsing foot deformity.

The importance of the transverse tarsal arch (TTA) has recently been extensively reevaluated and has even been considered to play a greater role in foot stability than the medial longitudinal arch (MLA). However, the relevance of this observation in the context of common clinical foot disorders, such as progressive collapsing foot deformity (PCFD), has not yet been fully clarified. In this biomechanical study, we examined ten pairs of human cadaveric feet by serial weight-bearing cone-beam computed tomography under controlled loading using a custom-designed testing machine. The MLA and TTA were transected separately, alternating the order in two study groups. A semiautomated three-dimensional evaluation of their influence on three components of PCFD, namely collapse of the longitudinal arch (sagittal Meary's angle), hindfoot alignment (sagittal talocalcaneal angle), and forefoot abduction (axial Meary's angle), was performed. Both arches had a relevant effect on collapse of the longitudinal arch, however the effect of transecting the MLA was stronger compared to the TTA (sagittal Meary's angle, 7.4° (95%CI 3.8° to 11.0°) vs. 3.2° (95%CI 0.5° to 5.9°); p = 0.021). Both arches had an equally pronounced effect on forefoot abduction (axial Meary's angle, 4.6° (95%CI 2.0° to 7.1°) vs. 3.0° (95%CI 0.6° to 5.3°); p = 0.239). Neither arch showed a consistent effect on hindfoot alignment. In conclusion, weakness of the TTA has a decisive influence on radiological components of PCFD, but not greater than that of the MLA. Our findings contribute to a deeper understanding and further development of treatment concepts for flatfoot disorders.

High-Intensity Focused Ultrasound Increases Facial Adipogenesis in a Swine Model via Modulation of Adipose-Derived Stem Cell Cilia.

Decreased medial cheek fat volume during aging leads to loss of a youthful facial shape. Increasing facial volume by methods such as adipose-derived stem cell (ASC) injection can produce facial rejuvenation. High-intensity focused ultrasound (HIFU) can increase adipogenesis in subcutaneous fat by modulating cilia on ASCs, which is accompanied by increased HSP70 and decreased NF-κB expression. Thus, we evaluated the effect of HIFU on increasing facial adipogenesis in swine (n = 2) via modulation of ASC cilia. Expression of CD166, an ASC marker, differed by subcutaneous adipose tissue location. CD166 expression in the zygomatic arch (ZA) was significantly higher than that in the subcutaneous adipose tissue in the mandible or lateral temporal areas. HIFU was applied only on the right side of the face, which was compared with the left side, where HIFU was not applied, as a control. HIFU produced a significant increase in HSP70 expression, decreased expression of NF-κB and a cilia disassembly factor (AURKA), and increased expression of a cilia increasing factor (ARL13B) and PPARG and CEBPA, which are the main regulators of adipogenesis. All of these changes were most prominent at the ZA. Facial adipose tissue thickness was also increased by HIFU. Adipose tissue volume, evaluated by magnetic resonance imaging, was increased by HIFU, most prominently in the ZA. In conclusion, HIFU increased ASC marker expression, accompanied by increased HSP70 and decreased NF-κB expression. Additionally, changes in cilia disassembly and length and expression of adipogenesis were observed. These results suggest that HIFU could be used to increase facial volume by modulating adipogenesis.

Medical-Surgical Implications of Branching Variation of Human Aortic Arch Known as Bovine Aortic Arch (BAA).

(1) Background: The aortic arch (AA) branching model is challenging, considering the multiple anatomical variations documented in existing research. The bovine aortic arch (BAA) is the most prevalent anatomical variation among these. This variant of AA branching has long been considered a nonsymptomatic malformation, having been discovered incidentally during imaging investigations for other causes. However, more recent studies have demonstrated that BAA shows a frequent association with coarctation of the aorta (CoA), thoracic aortic disease (TAD), and stroke. At the same time, given the current context of increasing activity in the fields of interventional and surgical procedures in the aorta and its branches, it is very important to know the medical-surgical implications of this anatomical variant. (2) Methods: We conducted a comprehensive review using PubMed and Embase, focusing specifically on randomized trials and cohort analyses that examined the medical-surgical implications of BAA. We assessed information related to studied groups, medical procedures, and study outcomes. Initially, we identified 8454 studies, and after rigorous evaluation, we narrowed down our review to 25 articles. (3) Discussions: The intervention consisted of assessing the risks associated with BAA through different imaging investigation methods such as computer tomographic angiography (CTA), magnetic resonance imaging (MRI), or ultrasonography (US). The following results were evaluated: the prevalence of the BAA, the importance of imaging investigations in establishing the diagnosis and the therapeutic management and monitoring the evolution of patients with the BAA, the association of the BAA with CoA, TAD, and stroke, and the potential risks of interventional treatment in patients with the BAA. (4) Conclusions: The prevalence of the BAA differs both between different ethnic groups and between genders. Advanced imaging methods such as CTA and 4D flow MRI allow detailed descriptions of supra-aortic vascular anatomy and information about blood flow velocities, direction, and turbulence in the AA. US remains an easy and valuable imaging investigation, with the potential to detect and correctly diagnose the BAA and its hemodynamic implications. Anatomical variations in the AA are associated with increased rates of TAD, CoA, and stroke, necessitating early diagnosis and increased supervision of patients with such incidentally observed abnormalities. In addition, there is a need to further develop and refine the surgical techniques used and personalize them to the individual characteristics of patients with the BAA.

The Management of Aortic Coarctation Associated with Hypoplastic Arches and Particular Arch Anatomies: A Literature Review.

The surgical management of aortic coarctation in newborns needs to ensure postoperative evolution and long-term results as much as possible. Patients with a Gothic arch have a higher rate of postoperative hypertension, while newborns with a bovine arch have higher rates of restenosis and, thus, an additional risk of mortality. Late hypertension, even in anatomically successfully repaired patients, confers a high risk for cardiovascular events. This review of the literature focuses on the management of aortic coarctations associated with hypoplastic arch and particular arch anatomies, focusing on surgical techniques and their outcomes.

High Medial Longitudinal Arch of the Foot and Latent Trigger Points in Lower Limb Muscles.

Background: The objective was to evaluate the prevalence of latent trigger points (LTrPs) in lower limb muscles in participants with a high medial longitudinal arch (MLA) of the foot compared to controls. Methods: Participants with a navicular drop test of 4-9 mm were included in the control group; the high MLA group included navicular drop test values of ≤4 mm. The presence of LTrPs was assessed by palpation techniques. The muscles evaluated were medial gastrocnemius (LTrP1), lateral gastrocnemius (LTrP2), soleus (LTrP1), peroneus longus, peroneus brevis, tibialis anterior, extensor digitorum longus, flexor digitorum longus, rectus femoris, vastus medialis (LTrP1 and LTrP2), and the vastus lateralis of the quadriceps (LTrP1 and LTrP2). Results: Thirty-seven participants with high MLA and thirty-seven controls were included in the study. Twenty-nine (78.4%) participants in the high MLA group had at least 1 LTrP, compared to twenty-three (62.2%) in the control group. No statistical difference (p < 0.05) was found in the total number of LTrPs between groups (4.46 ± 3.78 vs. 3.24 ± 3.85). There were more participants (p < 0.05) with LTrPs in the tibialis anterior, extensor digitorum longus, and vastus lateralis (LTrP1 and LTrP2) in the high MLA group than in the control group. Conclusion: Although no differences were found in the number of total LTrPs between groups, the prevalence was statistically significantly higher in the tibialis anterior, extensor digitorum longus, and vastus lateralis of the participants with high MLA of the foot.

Heterogeneity of Wnt1-Cre-marked and Pax2-Cre-marked first branchial arch cranial neural crest cells in mice.

OBJECTIVES: This study aimed to explore the heterogeneity and gene ontology of Wnt1-Cre-marked and Pax2-Cre-marked first branchial arch cranial neural crest cells (CNCs) in mice. METHODS: The embryos of Wnt1-Cre;R26RmTmG and Pax2-Cre;R26RmTmG at embryonic day (E)8.0-E9.25 were collected for histological observation. We performed immunostaining to compare green fluorescent protein (GFP)-positive CNCs in Pax2-Cre;R26RAi9 and Wnt1-Cre;R26RAi9 mice at E15.5. Single-cell RNA sequencing (scRNA-seq) was used to analyze the first branchial arch GFP-positive CNCs from Wnt1-Cre;R26RmTmG and Pax2-cre;R26RmTmGmice at E10.5. Real time fluorescence quantitative polymerase chain reaction (q-PCR) was performed to validate the differential genes. RESULTS: Wnt1-Cre-marked and Pax2-Cre-marked CNCs migrated from the neural plateto first and second branchial arches and to the first branchial arch, respectively, at E8.0. Although Wnt1-Cre-marked and Pax2-Cre-marked CNCs were found mostly in cranial-facial tissues, the former had higher expression in palate and tongue. The results of scRNA-seq showed that Pax2-Cre-marked CNCs specifically contributed to osteoblast differentiation and ossification, while Wnt1-Cre-marked CNCs participated in limb development, cell migration, and ossification. The q-PCR data also confirmed the results of gene ontology analysis. CONCLUSIONS: Pax2-Cre mice are perfect experimental animal models for research on first branchial arch CNCs and derivatives in osteoblast differentiation and ossification.

In vitro evaluation of the impact of intraoral scanner, scanning aids, and the scanned arch on the scan accuracy of edentulous arches.

PURPOSE: To assess the accuracy of complete maxillary and mandibular edentulous arch scans obtained using two different intraoral scanners (IOSs), with and without scanning aids, and to compare these results to those obtained using conventional impression methods. MATERIALS AND METHODS: Two IOSs were used (TRIOS 4 [TRI] and Emerald S [EMR]) to scan maxillary and mandibular typodonts. The typodonts were scanned without scanning aids [TRI_WSA and EMR_WSA groups] (n = 10). The typodonts were then scanned under four scanning aid conditions (n = 10): composite markers [TRI_MRK and EMR_MRK groups], scanning spray [TRI_SPR and EMR_SPR groups], pressure indicating paste [TRI_PIP and EMR_PIP groups], and liquid-type scanning aid [TRI_LQD and EMR_LQD groups]. Conventional impressions of both arches were also made using irreversible hydrocolloids in stock trays [IHC] and using polyvinyl siloxane (PVS) impression material in custom trays (n = 10) which were digitized using a laboratory scanner. Using a metrology software program, all scans were compared to a reference scan in order to assess trueness and to each other to assess precision. Trueness and precision were expressed as the root mean square (RMS) of the absolute deviation values and the statistical analysis was modeled on a logarithmic scale using fixed-effects models to meet model assumptions (α = 0.05). RESULTS: The main effect of arch (p = 0.004), scanner (p < 0.001), scanning aid (p = 0.041), and the interaction between scanner and scanning aid (p = 0.027) had a significant effect on mean RMS values of trueness. The arch (p = 0.015) and scanner (p < 0.001) had a significant effect on the mean RMS values of precision. The maxillary arch had better accuracy compared to the mandible. The TRIOS 4 scanner had better accuracy than both the Emerald S scanner and conventional impressions. The Emerald S had better precision than conventional impressions. The scanning spray and liquid-type scanning aids produced the best trueness with the TRIOS 4 scanner, while the liquid-type scanning aid and composite markers produced the best trueness for the Emerald S scanner. CONCLUSION: The scanned arch and the type of scanner had a significant effect on the accuracy of digital scans of completely edentulous arches. The scanning aid had a significant effect on the trueness of digital scans of completely edentulous arches which varied depending on the scanner used.

Effect of Second and Third Molar Eruption Stages on First Molar and Maxillary Arch Distalization With Modified Palatal Anchorage Plate and Beneslider: A 3D Finite Element Analysis.

AIM: To analyze the effects of the maxillary second molar and third molar eruption stages on the distalization of first molars with a modified palatal anchorage plate (MPAP) and Beneslider using three-dimensional (3D) finite element analysis. MATERIALS AND METHOD: Six finite element models (FEMs) of individual maxillary molar distalization and six FEM models of en-masse maxillary arch distalization (EMAD) at different stages of the maxillary molar eruption were created from cone-beam computed tomography (CBCT) images of the maxillary complex, and 3D displacements of the maxillary first and second molars were evaluated with MPAP and Beneslider. RESULTS: On individual molar distalization, Beneslider showed first molar distal translation during the second and third molar follicular stages, while MPAP showed distal tipping of the first molar. With EMAD, either of the appliances showed distal tipping of the first molars. There was palatal rolling and extrusion of the first molars. The second molar showed buccal drifting with intrusion, and the incisors showed palatal displacement along with extrusion. CONCLUSIONS: Second and third molar eruption stages had no adverse influence on first molar and en-masse maxillary arch distalization. Beneslider showed distal translation of the first molar, while distal tipping was seen with MPAP.

Scalp-Split Technique: A concept of bone splitting and expansion for thin alveolar ridges to place dental implants.

BACKGROUND: Bone expansion is where the existing bone at the implant site is split and separated to create a gap to widen it. This article introduces a novel concept of bone expansion for the ultra-thin alveolar ridges to place dental implants with zero wastage of existing natural bone in long-term edentulous arches. Instead of using twist drills and piezo surgery kits, the bone is split with a surgical scalpel blade to prevent natural bone wastage. METHODS: The split will help to expand the bone horizontally by using expanders to accommodate the smaller diameter implants. This technique was applied to 12 individuals to rehabilitate their atrophic edentulous mandibles to facilitate the implant-supported overdentures, and it revealed that all the cases achieved successful osseointegration after placing implants following this method. CONCLUSIONS: The "Scalp-Spilt Technique" is a promising technique for providing implant- retained or implant-supported prostheses over ultra-thin edentulous alveolar ridges.

Accessory thoracic muscles in human fetuses.

BACKGROUND: Typically, the anterior thoracic wall musculature is composed of the pectoralis major and pectoralis minor. Embryologically, these two muscles are originated from a common pectoral muscle mass; therefore, disruption of the normal development and differentiation could give rise to an aberrant or accessory muscle. The main aim of this study is to demonstrate and classify the accessory muscles of the pectoralis region in human fetuses. MATERIAL AND METHODS: Fifty spontaneously aborted human fetuses (25 male and 25 female, 100 sides) aged 18-38 weeks of gestation at death, and fixed in 10% formalin solution were examined. Following parental approval, the fetuses were donated to the Medical University anatomy program. The pectoralis major and minor muscle's morphology, the possible occurrence of accessory muscles of pectoral region and its morphology, their origins, and insertions, as well as the morphometric details, were assessed. RESULTS: The pectoralis major and minor were bilaterally found in all fetuses (100 cases). The accessory muscles of pectoral region were found in 16 cases (16%), and four types were differentiated. The Pectoralis Quartus muscle was the most common type of accessory muscles found in this study and occurred in 8 cases. The axillary arch muscle was observed in 3 cases. The chondrocoracoideus muscle was observed in 3 cases. The sternalis muscle occurred in 2 cases, and one of them was bifurcated. CONCLUSIONS: The thoracic region is characterized by a large amount of morphological variations, which are observed not only in adult population, but also among human fetuses. The pectoralis quartus was the most frequent variation in this study. Accessory structures like sternalis muscle, chondrocoracoideus muscle, pectoralis quartus muscle, or axillary arch muscle may have clinical implications, and knowledge about them is very useful for clinicians, especially plastic surgeons, thoracic surgeons, and orthopedics.

The wolf in sheep's clothing: vasovagal syncope in acute aortic dissection.

BACKGROUND: The presentation of acute aortic dissection can pose a challenge for emergency physicians, as it may occur without pain. Atypical presentations can lead to significant delays in diagnosis and increased mortality rates. CASE DESCRIPTION: Our case illustrates that isolated painless syncope can be a rare presenting symptom of acute aortic dissection type A. What is unique about our case is the limited extension of the dissection tear and the availability of Holter monitoring during the syncopal episode. CONCLUSION: This constellation provides insight into the pathophysiological mechanism of the syncope in this patient. Mechanisms of syncope related to acute aortic dissection are diverse. We show that vasovagal activation not related to pain can be the underlying mechanism of syncope in acute aortic dissection type A. Although excessive vasovagal tone in the setting of aortic dissection has been hypothesized in the past, it has never been as clearly illustrated as in the present case. This also highlights the challenge in risk stratification of syncope in the emergency department.

Comparative Analysis of Four Different Intraoral Scanners: An In Vitro Study.

(1) Background: Intraoral scanners undergo rapid advancements in hardware and software, prompting frequent updates by manufacturers. (2) Aim: This study aimed to quantitatively assess the precision of full dental arch digital impressions obtained from four different intraoral scanners: Trios 5-3SHAPE, Copenhagen, Denmark, CEREC Primescan- Dentsply Sirona, New York, NY, USA, Planmeca Emerald S-Planmeca Oy, Helsinki, Finland, and Medit i700-Medit Corp, Seoul, Republic of Korea. (3) Methods: A maxillary virtual dental model (digital master model) was created in accordance with ISO standard 20896-1. Subsequently, a 3D-printed model was obtained from the master model's STL file and scanned 15 times consecutively with each scanner. STL files were aligned with the master model's STL using Medit Link-Medit Design software v.3.1.0. The accuracy was evaluated by measuring deviations in micrometers between each scanner's scans and the master model. (4) Results: The study revealed variations in accuracy ranging from 23 to 32 µm across scans of the same dental arch, irrespective of the scanner used and scanning strategy employed. The anterior regions exhibited higher precision (Mean Absolute Deviation of 112 µm) compared to the posterior regions (Mean Absolute Deviation of 127 µm). Trios 5 demonstrated the smallest deviation (average 112 µm), indicating superior accuracy among the scanners tested. Emerald S and Medit i700 exhibited balanced performance (average 117 µm and 114 µm, respectively), while Primescan consistently displayed high deviation (average 127 µm). (5) Conclusions: Based on clinically accepted thresholds for accuracy in intraoral scanning, which are typically 200 µm for full arch scans, Trios 5 surpasses these benchmarks with its average deviation falling within the 200 µm range. Emerald S and Medit i700 also meet these standards, while Primescan, although showing high overall deviation, approaches the upper limit of clinical acceptability. Considering the limitations of an in vitro investigation, the findings demonstrate that each intraoral scanner under evaluation is capable of reliably and consistently capturing a full arch scan for dentate patients.

Dual-Arch Prosthesis: Revolutionizing Partial Dentate Rehabilitation.

The utilization of natural teeth as denture abutments offers a significant advantage in retarding the residual ridge resorption (RRR). This approach distributes stress concentration between the denture-bearing areas and abutment teeth, thereby mitigating issues such as loss of sensory feedback, compromised mastication, and aesthetic concerns. Overdentures, by providing additional support and stability, play a pivotal role in reducing RRR while enhancing stability and retention. A cast partial denture (CPD) becomes the first choice in cases of long edentulous span where cross-arch stabilization is required. The simplicity of insertion, removal, and maintenance, coupled with effective oral hygiene practices, make CPDs a practical solution. This case presentation illustrates the successful prosthetic rehabilitation of a partially dentate patient through the implementation of a maxillary overdenture and mandibular CPD underscoring the efficacy of this treatment modality in achieving optimal outcomes. The combination of these prostheses restored the masticatory function, improved the aesthetics, and enhanced the quality of life of the patient. This case highlights the effectiveness of dual-arch prosthetic solutions in achieving comprehensive rehabilitation in partially dentate patients.

Effects of different tooth movement patterns and aligner thicknesses on maxillary arch expansion with clear aligners: a three-dimensional finite element study.

Objectives: The objective of this study was to investigate the biomechanical effects of different tooth movement patterns and aligner thicknesses on teeth and periodontal tissues during maxillary arch expansion with clear aligners, to facilitate more precise and efficient clinical orthodontic treatments. Methods: Three-dimensional models including teeth, maxilla, periodontal ligament, and aligner were constructed and subjected to finite element analysis. Tooth displacement trends and periodontal ligament stresses were measured for seven tooth displacement patterns (divided into three categories including overall movement of premolars and molars with gradually increasing molar expansion in each step; distributed movement of premolars and molars; and alternating movement between premolars and molars at intervals) and two aligner thicknesses (0.5 mm and 0.75 mm) during maxillary arch expansion with clear aligners. Results: When expanding the maxillary arch with clear aligners, the effective expansion of the target teeth mainly showed a tilting movement trend. Increasing the amount of molar expansion increased the buccal displacement of the first molar but decreased the buccal displacement of the premolars. The mean buccal displacement of the target teeth was greater in the posterior teeth interval alternating movement group (0.026 mm) than in the premolar/molar distributed movement group (0.016 mm) and the overall movement group (0.015 mm). Increasing aligner thickness resulted in greater buccal displacement of the crowns and increased stress on the periodontal ligaments. Conclusion: Increasing the amount of molar expansion reduces the efficiency of premolar expansion. Alternating movement of premolars and molars at intervals achieves a higher arch expansion efficiency, but attention should be paid to the anchorage of adjacent teeth. Increasing the thickness of the aligner increases the expansion efficiency but may also increase the burden on the periodontal tissues.

Impact of vertical alveoloplasty on changes in keratinized mucosa width following full-arch immediate implant placement and rehabilitations: A prospective case series.

PURPOSE: This prospective case series aimed to investigate the effect of vertical alveoloplasty on the changes in keratinized mucosa width (KMW) following full-arch immediate implant placement and rehabilitation. MATERIALS AND METHODS: A total of 17 potential edentulous patients were enrolled and received implant placement and full-arch implant-supported immediate rehabilitations. The main outcome was to analyze the effect of vertical alveoloplasty on the changes in KMW. The amount of vertical alveoloplasty during implant surgery as well as the changes in KMW at buccal aspects from the day of surgery to 6 months post-surgery were recorded on the implant-level using a periodontal probe. The secondary outcome was to analyze the other possible factors that affected the changes in KMW. The included factors were the initial KMW, the distribution of implants in the maxilla and mandible, the distribution of implants in the anterior and posterior regions, the distribution of implants in extraction sockets and healed ridges, and gender. Mann-Whitney non-parametric tests and multiple linear regression adjusted by generalized estimating equations (GEE) were used to statistically analyze the data. RESULTS: A total of 121 implant positions were analyzed. The KMW was 4.1± 2.0 mm on the day of the surgery and 4.1± 1.7 mm 6 months post-surgery. The mean changes in KMW following 6 months were -0.1± 1.6 mm (p = 0.824). From the results of GEE, the vertical amount of alveoloplasty had no significant effect on changes in KMW. Both initial KMW and the distribution of implants in the anterior and posterior regions had significant impacts on the changes in KMW (p < 0.0001). CONCLUSION: The amount of vertical alveoloplasty during implant surgery has no significant impact on the KMW. The KMW remained stable from baseline to 6 months after alveoloplasty, implant placement, and immediate rehabilitations in potential edentulous arches. The initial KMW and the distribution of implants in the anterior and posterior regions were the possible factors affecting changes in KMW.