Au@AuPd Core-Alloyed Shell Nanoparticles for Enhanced Electrocatalytic Activity and Selectivity under Visible Light Excitation.

Plasmonic catalysis has been employed to enhance molecular transformations under visible light excitation, leveraging the localized surface plasmon resonance (LSPR) in plasmonic nanoparticles. While plasmonic catalysis has been employed for accelerating reaction rates, achieving control over the reaction selectivity has remained a challenge. In addition, the incorporation of catalytic components into traditional plasmonic-catalytic antenna-reactor nanoparticles often leads to a decrease in optical absorption. To address these issues, this study focuses on the synthesis of bimetallic core@shell Au@AuPd nanoparticles (NPs) with ultralow loadings of palladium (Pd) into gold (Au) NPs. The goal is to achieve NPs with an Au core and a dilute alloyed shell containing both Au and Pd, with a low Pd content of around 10 atom %. By employing the (photo)electrocatalytic nitrite reduction reaction (NO2RR) as a model transformation, experimental and theoretical analyses show that this design enables enhanced catalytic activity and selectivity under visible light illumination. We found that the optimized Pd distribution in the alloyed shell allowed for stronger interaction with key adsorbed species, leading to improved catalytic activity and selectivity, both under no illumination and under visible light excitation conditions. The findings provide valuable insights for the rational design of antenna-reactor plasmonic-catalytic NPs with controlled activities and selectivity under visible light irradiation, addressing critical challenges to enable sustainable molecular transformations.

Chemical Orderings in CuCo Nanoparticles: Topological Modeling Using DFT Calculations.

The orderings of atoms in bimetallic 1.6-2.1 nm-large CuCo nanoparticles, important as catalytic and magnetic materials, were studied using a combination of DFT calculations with a topological approach. The structure and magnetism of Cu50Co151, Cu101Co100, Cu151Co50, and Cu303Co102 nanoparticles; their resistance to disintegrating into separate Cu and Co species; as well as the exposed surface sites, were quantified and analyzed, showing a clear preference for Cu atoms to occupy surface positions while the Co atoms tended to form a compact cluster in the interior of the nanoparticles. The surface segregation of Co atoms that are encapsulated by less-active Cu atoms, induced by the adsorption of CO molecules, was already enabled at a low coverage of adsorbed CO, providing the energy required to displace the entire compact Co species inside the Cu matrices due to a notable adsorption preference of CO for the Co sites over the Cu ones. The calculated adsorption energies and vibrational frequencies of adsorbed CO should be helpful indicators for experimentally monitoring the nature of the surface sites of CuCo nanoparticles, especially in the case of active Co surface sites emerging in the presence of CO.

Silver-based bimetallic nanozyme fabrics with peroxidase-mimic activity for urinary glucose detection.

The enhanced catalytic properties of bimetallic nanoparticles have been extensively investigated. In this study, bimetallic Ag-M (M = Au, Pt, or Pd) cotton fabrics were fabricated using a combination of electroless deposition and galvanic replacement reactions, and improvement in their peroxidase-mimicking catalytic activity compared to that of the parent Ag fabric was studied. The Ag-Pt bimetallic nanozyme fabric, which showed the highest catalytic activity and ability to simultaneously generate hydroxyl (•OH) and superoxide (O2•-) radicals, was assessed as a urine glucose sensor. This nanozyme fabric sensor could directly detect urinary glucose in the pathophysiologically relevant high millimolar range without requiring sample predilution. The sensor could achieve performance on par with that of the current clinical gold standard assay. These features of the Ag-Pt nanozyme sensor, particularly its ability to avoid interference effects from complex urinary matrices, position it as a viable candidate for point-of-care urinary glucose monitoring.

Rapid SARS-CoV-2 sensing through oxygen reduction reaction catalysed by Au@Pt/Au core@shell nanoparticles.

The development of rapid, accurate, sensitive, and low-cost diagnostic methods for COVID-19 detection in real-time is the unique way to control infection sources and monitor illness progression. In this work, we propose an electrochemical biosensor for the rapid and accuracy diagnosis of COVID-19, through the determination of ORF1ab specific sequence. The biosensor is based on the immobilization of a thiolated sequence partially complementary (domain 1) to ORF1ab on gold screen-printed electrodes and the use of bifunctional Au@Pt/Au core@shell nanoparticles modified with a second thiolated sequence partially complementary to ORF1ab (domain 2) as electrochemical indicator of the hybridization of DNA sequences. The synthesized Au@Pt/Au nanoparticles consist of an Au core, a shell of Pt (Au@Pt NPs), that provides an excellent electrocatalytic activity toward the oxygen reduction reaction (ORR) even after formation of hybrid biomaterials by modification, through the Au protuberances growth on the NPs surface, with an oligonucleotide with recognition ability. The ORR electrochemical activity, enhanced by the label element (Au@Pt/Au NPs), has been employed, for the first time, as indicator of the hybridization event. Based on this strategy, target sequences of the SARS-CoV-2 virus have been detected with a detection limit of 32 pM. The selectivity of the biosensor was confirmed by analysing ORF1ab sequence in the presence of DNA sequences from other viruses. The biosensor has been successfully applied to the direct detection of the virus in non-amplified samples of nasopharyngeal swabs from infected and non-infected patients. Results compare well with those obtained through RT-qPCR but our method is more rapid since does not need any amplification process.

A multifunctional N-GO/PtCo nanocomposite bridged carbon fiber interface for the electrochemical aptasensing of CA15-3 oncomarker.

The development of integrated analytical devices is crucial for advancing next-generation point-of-care platforms. Herein, we describe a facile synthesis of a strongly catalytic and durable Nitrogen-doped graphene oxide decorated platinum cobalt (NGO-PtCo) nanocomposite that is conjugated with target-specific DNA aptamer (i-e. MUC1) and grown on carbon fiber. Benefitting from the combined features of the high electrochemical surface area of N-doped GO, high capacitance and stabilization by Co, and high kinetic performance by Pt, a robust, multifunctional, and flexible nanotransducer surface was created. The designed platform was applied for the specific detection of a blood-based oncomarker, CA15-3. The electrochemical characterization proved that nanosurface provides a highly conductive and proficient immobilization support with a strong bio-affinity towards MUC1 aptamer. The specific interaction between CA15-3 and the aptamer alters the surface properties of the aptasensor and the electroactive signal probe generated a remarkable increase in signal intensity. The sensor exhibited a wide dynamic range of 5.0 × 10-2 -200 U mL-1, a low limit of detection (LOD) of 4.1 × 10-2 U mL-1, and good reproducibility. The analysis of spiked serum samples revealed outstanding recoveries of up to 100.03 %, by the proposed aptasensor. The aptasensor design opens new revelations in the reliable detection of tumor biomarkers for timely cancer diagnosis.

Impacting the Surface Chemistry of NiAu by Immobilizing on MgO/N-rich Nanoporous Carbon Heterostructures for Boosting Catalytic Activities.

Tuning the physical and chemical interaction between metal-metal' (M-M') and metal-support is an ideal way to realize enhanced catalytic activity of metal nanoparticles (NPs). As a proof of concept, herein we report the fabrication of nickel-gold (Ni-Au) alloy nanoparticles attached to N-doped nanoporous carbon (NPC) intervened with MgO (Ni73Au27@MgO-NPC), achieved through the impregnation of metal precursors into Schiff-base network polymer (SNP) framework along with Mg(OH)2 and pyrolysis at 800 °C in N2 atmosphere. With high stability and heterogeneity, the nickel rich Ni73Au27@MgO-NPC exhibited higher catalytic activities with turnover frequencies of 29,272 h-1 (hydrogenation of p-nitrophenol), 93,843 h-1 (degradation of methyl orange), and 2,218 h-1 (epoxidation of stilbene). Enhanced catalytic activity is correlated to the synchronized electron density enhancement in Au, by Ni and MgO/N-rich nanoporous carbon heterostructures, as evident from detailed X-ray photoelectron spectroscopic studies.

Toxic effect of mussel Mytilus galloprovincialis exposed to Ag-TiO2 and ZnTi2O4-TiO2 bicomponent nanoparticles.

Nanoparticles (NPs) are widely used in various fields, including antifouling paints for ships and industrial structures submerged in water. The potential impact of NPs on aquatic organisms, particularly their potential toxicity, is a significant concern, as their negative impact has been relatively poorly studied. In this study, we evaluated the effect of different concentrations of bimetallic Ag-TiO2 and ZnTi2O4-TiO2 NPs, which could potentially be used in antifouling coatings, on the hemocytes of the Mediterranean mussel Mytilus galloprovincialis. Hemocytes were exposed to NPs at concentrations of 0.1-1 mg/L for 1 and 2 h, and the production of reactive oxygen species (ROS), levels of DNA damage, and number of dead cells were measured. Exposure to Ag-TiO2 NPs at 1 mg/L concentration for 1 h suppressed ROS production in hemocytes and reduced the relative number of agranulocytes in cell suspensions, without inducing DNA damage or cell death. Exposure to ZnTi2O4-TiO2 NPs did not cause changes in the ratio of granulocytes to agranulocytes in suspensions, nor did it affect other functional parameters of hemocytes. However, after a 2 h exposure period, ZnTi2O4-TiO2 NPs (1 mg/L) significantly reduced the production of ROS by hemocytes. These findings suggest that Ag-TiO2 and ZnTi2O4-TiO2 NPs have low acute toxicity for marine bivalves.

Ultrasound-electrochemistry assisted liquid-phase co-exfoliation of phosphorene decorated by Au-Ag bimetallic nanoparticles as nanozyme for smartphone-based portable sensing of 4-nitrophenol.

The stability of black phosphorene (BP) and its preparation and modification for developing and applying devices have become a hot topic in the interdisciplinary field. We propose ultrasound-electrochemistry co-assisted liquid-phase exfoliation as an eco-friendly one-step method to prepare gold-silver bimetallic nanoparticles (Au-AgNPs)-decorated BP nanozyme for smartphone-based portable sensing of 4-nitrophenol (4-NP) in different water sources. The structure, morphology, composition, and properties of Au-AgNPs-BP nanozyme are characterized by multiple instrumental analyses. Bimetallic salts are induced to efficiently occupy oxidative sites of BP to form highly stable Au-AgNPs-BP nanozyme and guarantee the integrity of the lamellar BP. The electrochemistry shortens the exfoliation time of the BP nanosheet and contributes to the loading efficiency of bimetallic nanoparticles on the BP nanosheet. Au-AgNPs-BP-modified screen-printed carbon electrode coupled with palm-sized smartphone-controlled wireless electrochemical analyzer as a portable wireless intelligent sensing platform was applied to the determination of 4-NP in a linear range of 0.6-10 µM with a limit of detection of 63 nM. It enables on-site determination of 4-NP content in lake water, river water, and irrigation ditch water. This work will provide a reference for an eco-friendly one-step preparation of bimetallic nanoparticle-decorated graphene-like materials as nanozymes and their smartphone-based portable sensing application outdoors.

Synthesis of silver-palladium Janus nanoparticles using co-sputtering of independent sources: experimental and theorical study.

Janus-type nanoparticles are important because of their ability to combine distinct properties and functionalities in a single particle, making them extremely versatile and valuable in various scientific, technological, and industrial applications. In this work, bimetallic silver-palladium Janus nanoparticles were obtained for the first time using the inert gas condensation technique. In order to achieve this, an original synthesis equipment built by Mantis Ltd. was modified by the inclusion of an additional magnetron in a second chamber, which allowed us to use two monometallic targets to sputter the two metals independently. With this arrangement, we could find appropriate settings at room temperature to promote the synthesis of bimetallic Janus nanoparticles. The structural properties of the resulting nanoparticles were investigated by transmission electron microscopy (TEM), and the chemical composition was analyzed by TEM energy dispersive spectroscopy (TEM-EDS), which, together with structural analysis, confirmed the presence of Janus-type nanostructures. Results of molecular dynamics and TEM simulations show that the differences between the crystalline structures of the Pd and Ag regions observed in the TEM micrographs can be explained by small mismatches in the orientations of the two regions of the particle. A density functional theory structural aims to understand the atomic arrangement at the interface of the Janus particle.

RuCo/ZrO2 Tandem Catalysts with Photothermal Confinement Effect for Enhanced CO2 Methanation.

Photothermal CO2 methanation reaction represents a promising strategy for addressing CO2-related environmental issues. The presence of efficient tandem catalytic sites with a localized high-temperature is an effective pathway to enhance the performance of CO2 methanation. Here the bimetallic RuCo nanoparticles anchored on ZrO2 fiber cotton (RuCo/ZrO2) as a photothermal catalyst for CO2 methanation are prepared. A significant photothermal CO2 methanation performance with optimal CH4 selectivity (99%) and rate (169.93 mmol gcat -1 h-1) is achieved. The photothermal energy of the RuCo bimetallic nanoparticles, confined by the infrared insulation and low thermal conductivity of the ZrO2 fiber cotton (ZrO2 FC), provides a localized high-temperature. In situ spectroscopic experiments on RuCo/ZrO2, Ru/ZrO2, and Co/ZrO2 indicate that the construction of tandem catalytic sites, where the Co site favors CO2 conversion to CO while incorporating Ru enhances CO* adsorption for subsequent hydrogenation, results in a higher selectivity toward CH4. This work opens a new insight into designing tandem catalysts with a photothermal confinement effect in CO2 methanation reaction.

Poly(N-Heterocyclic Carbene)-Capped Alloy and Core-Shell AuAg Bimetallic Nanoparticles.

N-Heterocyclic carbene (NHC)-stabilized metal nanoparticles (NPs) have recently attracted considerable attention. While most efforts in the field have been devoted to the development of NHC-tethered monometallic NPs and enhancing their stabilities under various conditions, their bimetallic counterparts are rare in the literature. Herein, we demonstrate that the covalent immobilization of Au and Ag atoms on polymerized NHCs is a powerful method to access bimetallic AuAg NPs. In addition, we show that while AuAg alloy NPs are often obtained via this method, the use of bimetallic polymeric substrates with lower Ag content, relative to Au, results in the formation of core-shell NPs with Au core and Ag shell. Application of these nanomaterials for oxygen reduction reaction is demonstrated with all materials exhibiting electrocatalytic activity. This work demonstrates for the first time that while bimetallic poly(NHC-metal)s are viable substrates to access NHC-stabilized bimetallic NPs, careful adjustment of metal content in the polymeric substrates can finetune the microstructure of the resulting NPs, i.e. alloy vs. core-shell.

Synthesis of zero valent copper/iron nanoparticles using Piper betle leaves for the removal of pharmaceutical contaminant atorvastatin.

In this study, bimetallic Cu-Fe nanoparticles were synthesized using the green approach with Piper betle leaves, and the removal efficiency of one of the pharmaceutical compounds, Atorvastatin, was investigated. UV, SEM, FTIR, EDAX, particle size, and zeta potential measurements were used to confirm nanoparticle fabrication. The removal efficiency of Atorvastatin (10 mg/L) by bimetallic Cu-Fe nanoparticles was 67% with a contact time of 30 min at pH 4, the adsorbent dosage of 0.2 g/L, and stirring at 100 rpm. Piper betle bimetallic Cu-Fe nanoparticles have demonstrated excellent stability, reusability, and durability, even after being reused five times. Furthermore, the synthesized bimetallic Cu-Fe nanoparticles demonstrated remarkable antimicrobial properties against gram-negative strains such as Escherichia coli and Klebsiella pneumoniae, gram-positive strains such as Staphylococcus aureus and Bacillus subtilis, and fungi such as Aspergillus niger. In addition, the antioxidant properties of the synthesized bimetallic Cu-Fe nanoparticles were assessed using the DPPH radical scavenging assay. The results indicated that the nanoparticles had good antioxidant activity. Thus, using Piper betle extract to make Cu-Fe nanoparticles made the procedure less expensive, chemical-free, and environmentally friendly, and the synthesized bimetallic Cu-Fe nanoparticles helped remove the pharmaceutical compound Atorvastatin from wastewater.

Nanoengineering of mono (Au, Ag) and bimetallic (Ag-Au) alloy nanoparticles for dye degradation and toxicity assessment.

This research entails the synthesis and catalytic exploration of bimetallic nanoparticles combining silver (Ag) and gold (Au). The Au concentration was systematically varied (20%, 40%, 60%, and 80%), alongside the utilization of CTAB surfactant for nanoparticle stabilization. UV visible spectroscopic analysis confirmed the formation and stability of synthesized Au, Ag and bimetallic (Ag-Au) nanoparticles. FESEM further confirmed the formation of uniform sized Au and Ag nanoparticles. Integration of Au into Ag resulted in bimetallic (Ag-Au) alloy nanoparticles with smaller dimensions as compared to individual Au and Ag nanoparticles. EDX spectra and mapping verified the composition of each synthesized bimetallic nanoparticle variant. The catalytic potential of the synthesized nanoparticles was methodically explored using UV-visible spectroscopy. All the synthesized nanoparticles showcased excellent catalytic efficacy. The synergistic effect of the alloyed bimetallic nanoparticles was found promising. Assessment of dye toxicity pre- and post-degradation was conducted using the ECOSAR program, indicating a reduction in dye toxicity following degradation.

In Vivo and in Vitro activity of colistin-conjugated bimetallic silver-copper oxide nanoparticles against Pandrug-resistant Pseudomonas aeruginosa.

BACKGROUND: Addressing microbial resistance urgently calls for alternative treatment options. This study investigates the impact of a bimetallic formulation containing colistin, silver, and copper oxide on a pandrug-resistant, highly virulent Pseudomonas aeruginosa (P. aeruginosa) isolate from a cancer patient at the National Cancer Institute, Cairo University, Egypt. METHODS: Silver nanoparticles (Ag NPs), copper oxide nanoparticles (CuO NPs), and bimetallic silver-copper oxide nanoparticles (Ag-CuO NPs) were synthesized using gamma rays, combined with colistin (Col), and characterized by various analytical methods. The antimicrobial activity of Col-Ag NPs, Col-CuO NPs, and bimetallic Col-Ag-CuO NPs against P. aeruginosa was evaluated using the agar well diffusion method, and their minimum inhibitory concentration (MIC) was determined using broth microdilution. Virulence factors such as pyocyanin production, swarming motility, and biofilm formation were assessed before and after treatment with bimetallic Col-Ag-CuO NPs. The in vivo efficacy was evaluated using the Galleria mellonella model, and antibacterial mechanism were examined through membrane leakage assay. RESULTS: The optimal synthesis of Ag NPs occurred at a gamma ray dose of 15.0 kGy, with the highest optical density (OD) of 2.4 at 375 nm. Similarly, CuO NPs had an optimal dose of 15.0 kGy, with an OD of 1.5 at 330 nm. Bimetallic Ag-CuO NPs were most potent at 15.0 kGy, yielding an OD of 1.9 at 425 nm. The MIC of colistin was significantly reduced when combined with nanoparticles: 8 µg/mL for colistin alone, 0.046 µg/mL for Col-Ag NPs, and 0.0117 µg/mL for Col-Ag-CuO NPs. Bimetallic Col-Ag-CuO NPs reduced the MIC four-fold compared to Col-Ag NPs. Increasing the sub-inhibitory concentration of bimetallic nanoparticles from 0.29 × 10-2 to 0.58 × 10-2 µg/mL reduced P. aeruginosa swarming by 32-64% and twitching motility by 34-97%. At these concentrations, pyocyanin production decreased by 39-58%, and biofilm formation was inhibited by 33-48%. The nanoparticles were non-toxic to Galleria mellonella, showing 100% survival by day 3, similar to the saline-treated group. CONCLUSIONS: The synthesis of bimetallic Ag-CuO NPs conjugated with colistin presents a promising alternative treatment for combating the challenging P. aeruginosa pathogen in hospital settings. Further research is needed to explore and elucidate the mechanisms underlying the inhibitory effects of colistin-bimetallic Ag-CuO NPs on microbial persistence and dissemination.

Machine Learning-Accelerated High-Throughput Computational Screening: Unveiling Bimetallic Nanoparticles with Peroxidase-Like Activity.

Bimetallic nanoparticles (NPs) with peroxidase-like (POD-like) activity play a crucial role in biosensing, disease treatment, environmental management, and other fields. However, their development is impeded by a vast range of tunable properties in components and structures, making the establishment of structure-effect relationships and the discovery of active materials challenging. Addressing this, we established robust scaling relationships by meticulously analyzing the catalytic reaction networks of pure metal NPs, which laid the volcano-shaped correlation between the activity and O* adsorption energy. Utilizing these relationships, we introduced an innovative and versatile descriptor of the NPs, which was then integrated into a machine learning-accelerated high-throughput computational workflow, significantly boosting the predictive accuracy for the POD-like activity of bimetallic NPs. Our methodological approach enabled the successful prediction of activities for 1260 bimetallic NPs, leading to the identification of several highly effective catalysts. Furthermore, we distilled several strategies for designing efficient bimetallic NPs based on our screening results.

Exploring Bimetallic Nanoparticles in Alzheimer's Therapy: A Novel Bio-Assisted Synthesis with Multitarget Potential.

Unlocking the potential of metal nanoparticles (NPs) in biomedical applications represents a leading endeavor in contemporary research. Among these, gold NPs (AuNPs) and silver NPs (AgNPs) have shown promising strides in combatting complex neurodegenerative ailments like Alzheimer's disease. Yet, the unexplored realm of bimetallic Au/Ag-NP harbors immense potential, concealing undiscovered opportunities for enhanced therapeutic effectiveness through the synergistic interaction of metal ions. Nonetheless, the limitations of traditional synthesis methods have restricted the preparation, biocompatibility, and versatility of these NPs, prompting an urgent requirement for innovative approaches. Biobased synthetic methodologies have emerged as a noteworthy solution to address these challenges. Our study ventures into uncharted terrain, harnessing collagen-mimicking peptide nanofibers as a bioactive template for the synthesis of bimetallic NPs. These green NPs exhibit remarkable activity in inhibiting amyloid ß (Aß) protein aggregation with almost 74% inhibition, surpassing the individual impacts of Au and Ag NPs, which show inhibition percentages of 66 and 43, respectively. The bimetallic Au/Ag-NPs not only demonstrate powerful inhibition of Aß, but they also demonstrate inhibitory activity against esterase (∼50%) and against reactive oxygen species (ROS) (∼75%), metamorphosing into multifaceted therapeutic agents for Alzheimer's disease. Au/Ag-NPs have proven highly beneficial in surpassing cellular barriers, as evidenced by studies on tissue penetration, 3D uptake, and endosomal escape, and these attributes also hold promise for the future treatment modalities. The findings indicate that the intrinsic traits of Au/Ag-NPs provide numerous mechanistic benefits, such as inhibiting Aß and acetylcholinesterase (AChE), and reducing stress related to ROS, in addition to their advantageous internalization properties. This research represents a notable advancement in the development of multitargeted treatments for neurodegenerative disorders using bimetallic NPs, diverging from the prevalent emphasis on AuNPs in the current literature.

Argyreia nervosa-driven biosynthesis of Cu-Ag bimetallic nanoparticles from plant leaves extract unveils enhanced antibacterial properties.

Our study specifically explores the biosynthesis of copper-silver bimetallic nanoparticles (Cu-Ag BMNPs) using Argyreia nervosa (AN) plant leaf green extract as a versatile agent for capping, reducing, and stabilizing. This biosynthesis method is characterized by its simplicity and cost-effectiveness, utilizing silver nitrate (AgNO3) and cupric oxide (CuO) as precursor materials. Our comprehensive characterization of the Cu-Ag BMNPs, employing techniques such as X-ray diffraction (XRD), UV-Vis spectrometry, scanning electron microscopy (SEM), Zetasizer, and Fourier transformed infrared spectrometry (FTIR). FTIR analysis reveals biofunctional groups and chemical bands, while SEM and XRD analyses provide morphological and structural details. To evaluate the antimicrobial properties of the Cu-Ag BMNPs, we conducted disc diffusion and minimum inhibitory concentration (MIC) assays against Escherichia coli (E. coli), with results compared to the standard gentamicin antibiotic. It is observed that the 2% and 5% CuO concentrations of AN Cu-Ag BMNPs exhibit substantial antibacterial activity in comparison to AN extract when tested on EPEC. Among these, the Cu-Ag BMNPs at a 2% concentration demonstrate higher antibacterial activity, potentially attributed to the enhanced dispersion of BMNPs facilitated by the lower CuO doping concentration. These two assays showcased the improved antimicrobial activity of Cu-Ag BMNPs, highlighting their synergistic effect, characterized by high MIC values and a broad zone of inhibition in the disc diffusion tests against E. coli. These results emphasize the significant antibacterial potential of the synthesized BMNPs, with a medicinal plant AN leaf extract playing a pivotal role in enhancing antibacterial activity.

Label-free electrochemical aptasensor for ultrasensitive lead ion detection based on flower-like AuNPs@MoS2 and core-shell Pt@Pd bimetallic nanoparticles.

A signal-amplified platform was designed to construct a label-free electrochemical aptasensor for lead ions (Pb2+) assay. First, flower-like molybdenum disulfide-supported AuNPs (AuNPs@MoS2) nanocomposites were synthesized and used as substrates for modifying the electrode. The AuNPs@MoS2 material possessed large surface area and superior biocompatibility, which was beneficial to improve the loading amount of the complementary DNA (cDNA) and amplified the response signal. Importantly, the prepared core-shell Pt@Pd bimetallic nanoparticles (Pt@PdNPs) were used to conjugate with redox marker thionine (Thi) and aptamer (Apt) for further signal amplification; the obtained signal probes (Thi-Pt@PdNPs-Apt) were connected by the cDNA assembled on the electrode through DNA hybridization. Differential pulse voltammetry was performed to monitor the signal of Thi. After incubating of aptasensor with Pb2+, the specific recognition of Pb2+ and Apt resulted in the dissociation of aptamer-cDNA complex, thereby the Thi-Pt@PdNPs-Apt separated from the electrode surface and decreased current response was obtained. The prepared electrochemical sensor exhibited linear response to Pb2+ in the range 5.0 × 10-4-100 nM and a detection limit of 1.0 × 10-4 nM was achieved. The sensor was applied to the determination of Pb2+ in actual sample with high sensitivity and accuracy, demonstrating potential applications in heavy metal monitoring.

Bimetallic nanoparticles as cascade sensitizing amplifiers for low-dose and robust cancer radio-immunotherapy.

Radiotherapy (RT) is one of the most feasible and routinely used therapeutic modalities for treating malignant tumors. In particular, immune responses triggered by RT, known as radio-immunotherapy, can partially inhibit the growth of distantly spreading tumors and recurrent tumors. However, the safety and efficacy of radio-immunotherapy is impeded by the radio-resistance and poor immunogenicity of tumor. Herein, we report oxaliplatin (IV)-iron bimetallic nanoparticles (OXA/Fe NPs) as cascade sensitizing amplifiers for low-dose and robust radio-immunotherapy. The OXA/Fe NPs exhibit tumor-specific accumulation and activation of OXA (II) and Fe2+ in response to the reductive and acidic microenvironment within tumor cells. The cascade reactions of the released metallic drugs can sensitize RT by inducing DNA damage, increasing ROS and O2 levels, and amplifying the immunogenic cell death (ICD) effect after RT to facilitate potent immune activation. As a result, OXA/Fe NPs-based low-dose RT triggered a robust immune response and inhibited the distant and metastatic tumors effectively by a strong abscopal effect. Moreover, a long-term immunological memory effect to protect mice from tumor rechallenging is observed. Overall, the bimetallic NPs-based cascade sensitizing amplifier system offers an efficient radio-immunotherapy regimen that addresses the key challenges.

Mechanical properties, sustained release, and oxygen scavenging properties of nanocomposite films loaded with bimetallic nanoparticles (Fe2O3/TiO2) in extra virgin olive oil.

The aim of this study was the synthesis of bimetallic nanoparticles based on Fe2O3/TiO2 and its use in the poly(lactic acid) (PLA) films as an oxygen scavenger in extra virgin olive oil (EVOO) packaging. Bimetallic nanocomposites were prepared by two different precipitation methods (precipitation with ammonia and sodium hydroxide). The characteristics of bimetallic nanoparticles precipitated with sodium hydroxide (Na-Ti0.01Fe0.048O0.08) and bimetallic nanoparticles precipitated with ammonia (NH-Ti0.01Fe0.022O0.09) were compared. Relative amounts of elements in bimetallic nanocomposites and their morphological characteristics were determined using field emission scanning electron microscopy coupled with energy-dispersive X-ray spectrometer. Porosity volume and surface area of bimetallic nanoparticles were calculated using adsorption-desorption isotherms and the Brunauer-Emmett-Teller method. The formation/characterization of bimetallic nanoparticles and their location in the matrix of PLA-based nanocomposite film was studied using X-ray diffraction and Fourier transform infrared. In nanocomposite films based on PLA, bimetallic nanoparticles lead to better oxidative stability (peroxide value, p-anisidine index, K232, and K270) of the EVOO and oxygen scavenging during storage compared to free nanoparticles. Mechanical properties of nanocomposite films were improved due to bimetallic nanoparticles, which were better for Na-Ti0.01Fe0.048O0.08. In vitro release modeling of the bimetallic nanoparticles in EVOO proved that Fickian diffusion is the dominant mechanism, and the Peleg model was the best description of the release behavior of nanoparticles.