The future in the litter bin - bioconversion of food waste as driver of a circular bioeconomy.

Bioconversion of organic waste requires the development and application of rather simple, yet robust technologies capable of transferring biomass into energy and sustainable materials for the future. Food waste plays a significant role in this process as its valorisation reduces waste and at the same time avoids additional exploitation of primary resources. Nonetheless, to literally become "litterate". extensive research into such robust large-scale methods is required. Here, we highlight some promising avenues and materials which fulfill these "waste to value" requirements, from various types of food waste as sustainable sources for biogas, bioethanol and biodiesel to fertilizers and antioxidants from grape pomace, from old-fashioned fermentation to the magic of anaerobic digestion.

The outlooks and key challenges in renewable biomass feedstock utilization for value-added platform chemical via bioprocesses.

The conversion of renewable biomass feedstock into value-added products via bioprocessing platforms has become attractive because of environmental and health concerns. Process performance and cost competitiveness are major factors in the bioprocess design to produce desirable products from biomass feedstock. Proper pretreatment allows delignification and hemicellulose removal from the liquid fraction, allowing cellulose to be readily hydrolyzed to monomeric sugars. Several industrial products are produced via sugar fermentation using either naturally isolated or genetically modified microbes. Microbial platforms play an important role in the synthesis of several products, including drop-in chemicals, as-in products, and novel compounds. The key elements in developing a fermentation platform are medium formulation, sterilization, and active cells for inoculation. Downstream bioproduct recovery may seem like a straightforward chemical process, but is more complex, wherein cost competitiveness versus recovery performance becomes a challenge. This review summarizes the prospects for utilizing renewable biomass for bioprocessing.

Elevated CO2 concentration enhance carbon and nitrogen metabolism and biomass accumulation of Ormosiahosiei.

Elevated CO2 concentrations may inhibit photosynthesis due to nitrogen deficiency, but legumes may be able to overcome this limitation and continue to grow. Our study confirms this conjecture well. First, we placed the two-year-old potted saplings of Ormosia hosiei (O. hosiei) (a leguminous tree species) in the open-top chamber (OTC) with three CO2 concentrations of 400 (CK), 600 (E1), and 800 µmol·mol-1 (E2) to simulate the elevated CO2 concentration environment. After 146 days, the light saturation point (LSP), light compensation point (LCP), apparent quantum efficiency (AQE), and dark respiration rate (Rd) of O. hosiei were increased under increasing CO2 concentration and obtain the maximum ribulose diphosphate (RuBP) carboxylation rate (Vc max) and RuBP regenerated photosynthetic electron transfer rate (Jmax) were also significantly increased under E2 treatment (P < 0.05). This results in a significant increase of the maximum assimilation rate (Amax) under elevated CO2 concentrations. Sucrose phosphate synthase (SPS) activity in sucrose metabolism increased in the leaves, more soluble sugars, starches, and sucrose was produced, but sucrose content only in leaves increased at E2, and more carbon flows to the roots. The activity of the NH4+ assimilating enzymes glutamine synthetase (GS), glutamate synthetase (GOGAT), and glutamate dehydrogenase (GDH) in the leaves of O. hosiei increases under elevated CO2 concentrations to promote nitrogen synthesis that reduces the content of ammonium nitrogen and increases the content of nitrate nitrogen. In addition, under E1 conditions, sucrose synthase (SS), direction of synthesis activity was highest and sucrose invertase (INV) activity was lowest, this means that the balance of C and N metabolism is maintained. While under E2 conditions SS activity decreased and INV activity increased, this increased C/N and nitrogen use efficiency. So, the elevated CO2 concentration promotes the accumulation of O. hosiei biomass, especially in the aboveground part, but did not have a significant effect on the accumulation of root biomass. This means that O. hosiei is able to cope under the elevated CO2 concentration without showing photosynthetic adaptation during the experimental period.

Remote sensing-based mangrove blue carbon assessment in the Asia-Pacific: A systematic review.

Accurate measuring, mapping, and monitoring of mangrove forests support the sustainable management of mangrove blue carbon in the Asia-Pacific. Remote sensing coupled with modeling can efficiently and accurately estimate mangrove blue carbon stocks at larger spatiotemporal extents. This study aimed to identify trends in remote sensing/modeling employed in estimating mangrove blue carbon, attributes/variations in mangrove carbon sequestration estimated using remote sensing, and to compile research gaps and opportunities, followed by providing recommendations for future research. Using a systematic literature review approach, we reviewed 105 remote sensing-based peer-reviewed articles (1990 - June 2023). Despite their high mangrove extent, there was a paucity of studies from Myanmar, Bangladesh, and Papua New Guinea. The most frequently used sensor was Sentinel-2 MSI, accounting for 14.5 % of overall usage, followed by Landsat 8 OLI (11.5 %), ALOS-2 PALSAR-2 (7.3 %), ALOS PALSAR (7.2 %), Landsat 7 ETM+ (6.1 %), Sentinel-1 (6.7 %), Landsat 5 TM (5.5 %), SRTM DEM (5.5 %), and UAV-LiDAR (4.8 %). Although parametric methods like linear regression remain the most widely used, machine learning regression models such as Random Forest (RF) and eXtreme Gradient Boost (XGB) have become popular in recent years and have shown good accuracy. Among a variety of attributes estimated, below-ground mangrove blue carbon and the valuation of carbon stock were less studied. The variation in carbon sequestration potential as a result of location, species, and forest type was widely studied. To improve the accuracy of blue carbon measurements, standardized/coordinated and innovative methodologies accompanied by credible information and actionable data should be carried out. Technical monitoring (every 2-5 years) enhanced by remote sensing can provide accurate and precise data for sustainable mangrove management while opening ventures for voluntary carbon markets to benefit the environment and local livelihood in developing countries in the Asia-Pacific region.

Microwave-assisted Pyrolysis-A new way for the sustainable recycling and upgrading of plastic and biomass:A review.

The efficient utilization of organic solid waste resources can help reducing the consumption of conventional fossil fuels, mitigating environmental pollution, and achieving green sustainable development. Due to its dual nature of being both a resource and a source of pollution, it is crucial to implement suitable recycling technologies throughout the recycling and upgrading processes for plastics and biomass, which are organic solid wastes with complex mixture of components. The conventional pyrolysis and hydropyrolysis were summarized for recycling plastics and biomass into highvalue fuels, chemicals, and materials. To enhance reaction efficiency and improve product selectivity, microwave-assisted pyrolysis was introduced to the upgrading of plastics and biomass through efficient energy supply especially with the aid of catalysts and microwave absorbers. This review provides a detail summary of microwave-assisted pyrolysis for plastics and biomass from the technical, applied, and mechanistic perspectives. Based on the recent technological advances, the future directions for the development of microwave-assisted pyrolysis technologies are predicted.

Water for agriculture: more crop per drop.

Global crop production in agriculture depends on water availability. Future scenarios predict increasing occurrence of flash floods and rapidly developing droughts accompanied by heatwaves in humid regions that rely on rain-fed agriculture. It is challenging to maintain high crop yields, even in arid and drought-prone regions that depend on irrigation. The average water demand of crops varies significantly, depending on plant species, development stage, and climate. Most crops, such as maize and wheat, require relatively more water during the vegetative phase compared to the ripening phase. In this review, we explain WUE and options to improve water use and thus crop yield. Nutrient management might represent another possibility to manipulate water uptake and use by plants. An emerging topic involves agroforest co-cultivation, where trees in the system facilitate water transfer through hydraulic lift, benefiting neighbouring crops. Other options to enhance crop yield per water use are discussed.

Synergistic promotion of microalgal growth and copper removal from synthetic wastewater by nanoscale zero-valent iron particles.

The increasing concentrations of heavy metals in livestock wastewater pose a serious threat to the environmental safety and human health, limiting its resource utilisation. In the present study, microalgae and nanoscale zero-valent iron were selected to construct a coupled system for copper-containing wastewater treatment. The addition of 50 mg·L-1 nanoscale zero-valent iron (50 nm) was the optimal value for the experiment, which could significantly increase the biomass of microalgae. In addition, nanoscale zero-valent iron stimulated microalgal secretion of extracellular polymeric substances, increasing the contents of binding sites, organic ligands, and functional groups on the microalgal surfaces and ultimately promoting the settling of microalgae and binding of heavy metals. The coupled system could quickly adapt to copper-containing wastewater of 10 mg·L-1, and the copper removal rate reached 94.99%. Adsorption and uptake by organisms, together with the contribution of zero-valent iron nanoparticles, are the major copper removal pathways. Overall, this work offers a novel technical solution for enhanced treatment of copper-containing livestock wastewater, which will help improve the efficiency and quality of wastewater treatment.

Surfactant Directionally Assembled at the Electrode-Electrolyte Interface for Facilitating Electrocatalytic Aldehyde Hydrogenation.

Electrocatalytic hydrogenation of unsaturated aldehydes to unsaturated alcohols is a promising alternative to conventional thermal processes. Both the catalyst and electrolyte deeply impact the performance. Designing the electrode-electrolyte interface remains challenging due to its compositional and structural complexity. Here, we employ the electrocatalytic hydrogenation of 5-hydroxymethylfurfural (HMF) as a reaction model. The typical cationic surfactant, cetyltrimethylammonium bromide (CTAB), and its analogs are employed as electrolyte additives to tune the interfacial microenvironment, delivering high-efficiency hydrogenation of HMF and inhibition of the hydrogen evolution reaction (HER). The surfactants experience a conformational transformation from stochastic distribution to directional assembly under applied potential. This oriented arrangement hampers the transfer of water molecules to the interface and promotes the enrichment of reactants. In addition, near 100% 2,5-bis(hydroxymethyl)furan (BHMF) selectivity is achieved, and the faradaic efficiency (FE) of the BHMF is improved from 61% to 74% at -100 mA cm-2. Notably, the microenvironmental modulation strategy applies to a range of electrocatalytic hydrogenation reactions involving aldehyde substrates. This work paves the way for engineering advanced electrode-electrolyte interfaces and boosting unsaturated alcohol electrosynthesis efficiency.

Flavonoids with lipase inhibitory activity from lemon squeezing waste: isolation, multispectroscopic and in silico studies.

BACKGROUND: Obesity is recognized as a lifestyle-related disease and the main risk factor for a series of pathological conditions, including cardiovascular diseases, hypertension and type 2 diabetes. Citrus limon is an important medicinal plant, and its fruits are rich in flavonoids investigated for their potential in managing obesity. In the present work, a green extraction applied to lemon squeezing waste (LSW) was optimized to recover pancreatic lipase (PL) inhibitors. RESULTS: The microwave-assisted procedure yielded an extract with higher lipase inhibitory activity than those obtained by maceration and ultrasound. The main compounds present in the extract were identified by high-performance liquid chromatographic-mass spectrometric analysis, and hesperidin, eriocitrin and 4'-methyllucenin II were isolated. The three compounds were evaluated for in vitro PL inhibitory activity, and 4'-methyllucenin II resulted in the most promising inhibitor (IC50 = 12.1 µmol L-1; Ki = 62.2 µmol L-1). Multispectroscopic approaches suggested the three flavonoids act as competitive inhibitors and the binding studies indicated a greater interaction between PL and 4'-methyllucenin II. Docking analysis indicated the significant interactions of the three flavonoids with the PL catalytic site. CONCLUSION: The present work highlights flavonoid glycosides as promising PL inhibitors and proposes LSW as a safe ingredient for the preparation of food supplements for managing obesity. © 2024 Society of Chemical Industry.

Integrated biorefinery approach for utilization of wood waste into levulinic acid and 2-Phenylethanol production under mild treatment conditions.

In a bid to explore the on-site biorefinery approach for conversion of forestry residues, lignocellulosic biomass into value-added products was studied. The bark white pine wood was subjected to the microwave technique of fast and slow hydrolysis under varying acid and biomass concentrations to produce levulinic acid (LA). The HCl (2% v/v) and plant biomass (1% w/v) were identified as the optimum conditions for fast wood hydrolysis (270 ºC for 12 sec), which led to maximum LA yield of 446.68 g/kgPB. The proposed sustainable approach is mild, quick, and utilized a very low concentration of the HCl for the production of LA. The hydrolysate was used as a medium for Kluyveromyces marxianus growth to produce 2-phenylethanol (2-PE). K. marxianus used 74-95% of furfural from hydrolysate as a co-substrate to grow. The proposed model of the integrated biorefinery is an affordable on-site approach of using forest waste into localized solutions to produce LA and 2-PE.

Salsola Tetragona as a new low-cost adsorbent for water treatment: highly effective adsorption of crystal violet.

Synthetic dyes are prevalent in aquatic environments, they have high toxicities, are non-degradable, and accumulate in the water. The removal of Crystal violet (CV) is carried out using batch experiments on the Salsola Tetragona (ST) plant as a novel adsorbent. The prepared adsorbent was analyzed by various methods (MEB, EDX, IRTF and PZC), to support its applicability as adsorbent. The adsorption study of CV is performed by optimizing the parameters affecting the adsorption process. The adsorption kinetics study is represented by pseudo-second-order (R2 = 0.999) and the adsorption process is limited by external mass transport. In addition, the isotherm results demonstrate that the Langmuir model interprets better the adsorption isotherm. The thermodynamic parameters suggest that the adsorption phenomena are spontaneous and exothermic. Furthermore, the adsorption reactions involved are of physisorption type, which facilitates the desorption of pollutants from the surface of the adsorbent. The results show that ST adsorbent effectively removes CV in an aqueous solution, which is demonstrated by the maximum amount adsorption of 246.7 mg.g-1 at optimum adsorption conditions: pH = 6, adsorbent dose of 0.5 g.L-1, initial CV concentration of 10 mg.L-1, and adsorption time of 30 min at 298 K. Finally, these results can be considered as a useful reference for wastewater treatment using ST.

The novelty of our work, entitled "Salsola Tetragona as a New Low-Cost Adsorbent for Water Treatment: Highly Effective Adsorption of Crystal Violet", lies in the utilization of a new biomass abundant in the southwestern region of Morocco. This plant as a novel material is used in its raw state as an adsorbent for removing a cationic dye. According to the literature, this material has not been previously employed in water treatment. Hence, to fill the gap in the literature, we examined its in-batch adsorption to remove crystal violet from the aqueous solution. The results show a high adsorption capacity compared to other natural biomass.

Engineering a coenzyme-independent dioxygenase for one-step production of vanillin from ferulic acid.

Vanillin is one of the world's most important flavor and fragrance compounds used in foods and cosmetics. In plants, vanillin is reportedly biosynthesized from ferulic acid via the hydratase/lyase-type enzyme VpVAN. However, in biotechnological and biocatalytic applications, the use of VpVAN limits the production of vanillin. Although microbial enzymes are helpful as substitutes for plant enzymes, synthesizing vanillin from ferulic acid in one step using microbial enzymes remains a challenge. Here, we developed a single enzyme that catalyzes vanillin production from ferulic acid in a coenzyme-independent manner via the rational design of a microbial dioxygenase in the carotenoid cleavage oxygenase family using computational simulations. This enzyme acquired catalytic activity toward ferulic acid by introducing mutations into the active center to increase its affinity for ferulic acid. We found that the single enzyme can catalyze not only the production of vanillin from ferulic acid but also the synthesis of other aldehydes from p-coumaric acid, sinapinic acid, and coniferyl alcohol. These results indicate that the approach used in this study can greatly expand the range of substrates available for the dioxygenase family of enzymes. The engineered enzyme enables efficient production of vanillin and other value-added aldehydes from renewable lignin-derived compounds. IMPORTANCE: The final step of vanillin biosynthesis in plants is reportedly catalyzed by the enzyme VpVAN. Prior to our study, VpVAN was the only reported enzyme that directly converts ferulic acid to vanillin. However, as many characteristics of VpVAN remain unknown, this enzyme is not yet suitable for biocatalytic applications. We show that an enzyme that converts ferulic acid to vanillin in one step could be constructed by modifying a microbial dioxygenase-type enzyme. The engineered enzyme is of biotechnological importance as a tool for the production of vanillin and related compounds via biocatalytic processes and metabolic engineering. The results of this study may also provide useful insights for understanding vanillin biosynthesis in plants.

Life Cycle Economic and Environmental Assessment of Producing Synthetic Jet Fuel Using CO2/Biomass Feedstocks.

The aviation industry is responsible for over 2% of global CO2 emissions. Synthetic jet fuels generated from biogenic feedstocks could help reduce life cycle greenhouse gas (GHG) emissions compared to petroleum-based fuels. This study assesses three processes for producing synthetic jet fuel via the synthesis of methanol using water and atmospheric CO2 or biomass. A life cycle assessment and cost analysis are conducted to determine GHG emissions, energy demand, land occupation, water depletion, and the cost of producing synthetic jet fuel in Switzerland. The results reveal that the pathway that directly hydrogenates CO2 to methanol exhibits the largest reductions in terms of GHG emission (almost 50%) compared to conventional jet fuel and the lowest production cost (7.86 EUR kgJF-1); however, its production cost is currently around 7 times higher than the petroleum-based counterpart. Electrical energy was found to be crucial in capturing CO2 and converting water into hydrogen, with the sourcing and processing of the feedstocks contributing to 79% of the electric energy demand. Furthermore, significant variations in synthetic jet fuel cost and GHG emissions were shown when the electricity source varies, such as utilizing grid electricity pertaining to different countries with distinct electricity mixes. Thus, upscaling synthetic jet fuels requires energy-efficient supply chains, sufficient feedstock, large amounts of additional (very) low-carbon energy capacity, suitable climate policy, and comprehensive environmental analyses.

Pomelo peel biomass derived highly active advanced-oxidation-process catalyst: Complete elimination of organic pollutants.

The advanced oxidation process (AOPs) is playing an important role in the elimination of hazardous organic pollutants, but the development of inexpensive and highly active advanced catalysts is facing challenges. In this study, a low-cost and readily available agricultural waste resource pomelo peel-flesh (PPF) biomass was used as the basic raw material, and the uniformly dispersed small cobalt nanoparticles were effectively anchored in the biochar derived from pomelo peel-flesh (BDPPF) by impregnation adsorption/complexation combined with heat treatment. Co/BDPPF (BDPPF embedded with Co) can effectively activate peroxymonosulfate (PMS) to SO4·-, ·OH and 1O2 reactive oxygen species, and achieve nearly 100% degradation of tetracycline persistent organic pollutant. Co/BDPPF can not only degrade tetracycline efficiently in complex water environment, but also degrade most organic pollutants universally, and has long-term stability, which solves the problem of poor universality and stability of heterogeneous catalysts to a certain extent. Importantly, Co/BDPPF derived from waste biomass was also innovatively designed as the core of an integrated continuous purification device to achieve continuous purification of organic wastewater. In this study, agricultural waste resources were selected as biomass raw materials to achieve efficient capture of Co2+, and finally developed advanced AOPs catalyst with excellent performance to achieve the purification of organic wastewater. It also provides a promising solution for the preparation of simple, low-cost, large-scale production of AOPs catalysts that can be put into actual production.

Life cycle assessment of carbonaceous pellets used in blast furnaces in the context of "double carbon".

As the sole carbonaceous renewable energy source, biomass is distinguished by its abundant yield, widespread distribution, and carbon neutrality. It is integral to the achievement of zero and negative carbon production via conventional carbonaceous pellet technology. This study introduces a cradle-to-gate life cycle assessment methodology for biomass preparation in carbonaceous pellets. We prepare high-quality biochar through a process combining hydrothermal carbonization and pyrolytic carbonization. Biomass high molecular weight extracts are obtained via organic pyrolytic extraction, while biomass high-temperature binders result from the modification and treatment of biochar. Biomass carbonaceous pellets are then formed using hot press technology. The ReCiPe model facilitates a comprehensive life cycle assessment of biomass carbonaceous pellets used in blast furnace production. The study leverages two comprehensive evaluation indicators - renewability, and environmental performance - to enhance the environmental performance of the process system and to maximize energy-saving and emission reduction potential.

Evolutionary pathways to lower biomass allocation to the seed coat in crops: insights from allometric scaling.

Crops generally have seeds larger than their wild progenitors´ and with reduced dormancy. In wild plants, seed mass and allocation to the seed coat (a proxy for physical dormancy) scale allometrically so that larger seeds tend to allocate less to the coats. Larger seeds and lightweight coats might thus have evolved as correlated traits in crops. We tested whether 34 crops and 22 of their wild progenitors fit the allometry described in the literature, which would indicate co-selection of both traits during crop evolution. Deviations from the allometry would suggest that other evolutionary processes contribute to explain the emergence of larger, lightweight-coated seeds in crops. Crops fitted the scaling slope but deviated from its intercept in a consistent way: Seed coats of crops were lighter than expected by their seed size. The wild progenitors of crops displayed the same trend, indicating that deviations cannot be solely attributed to artificial selection during or after domestication. The evolution of seeds with small coats in crops likely resulted from a combination of various pressures, including the selection of wild progenitors with coats smaller than other wild plants, further decreases during early evolution under cultivation, and indirect selection due to the seed coat-seed size allometry.

Characterization of Bioadsorbents from Organic Municipal Waste.

This article describes the production of bioadsorbents coming from seven different kinds of organic waste, produced in huge quantities in households, in a two-stage process. In order to determine the influence of the process parameters of carbonization (I stage) and activation with potassium hydroxide solution (II stage), the following analysis of the physicochemical properties of each sample at each stage processing was performed: base elemental composition, structure properties, surface morphology, thermal stability, crystallinity, and transmittance spectra characteristic bands. There was a lack of research on samples after each stage of waste processing in the literature. Addressing this allowed us to evaluate the transformative potential of each kind of organic waste included in the research and select the best waste for the production of bioadsorbents commonly used in environmental protection. Moreover, the results were compared with the ones in the literature. The utilization of particular kinds of organic waste seems to be especially important taking into account the strategy of waste management and sustainable development.

Advanced Triboelectric Applications of Biomass-Derived Materials: A Comprehensive Review.

The utilization of triboelectric materials has gained considerable attention in recent years, offering a sustainable approach to energy harvesting and sensing technologies. Biomass-derived materials, owing to their abundance, renewability, and biocompatibility, offer promising avenues for enhancing the performance and versatility of triboelectric devices. This paper explores the synthesis and characterization of biomass-derived materials, their integration into triboelectric nanogenerators (TENGs), and their applications in energy harvesting, self-powered sensors, and environmental monitoring. This review presents an overview of the emerging field of advanced triboelectric applications that utilize the unique properties of biomass-derived materials. Additionally, it addresses the challenges and opportunities in employing biomass-derived materials for triboelectric applications, emphasizing the potential for sustainable and eco-friendly energy solutions.

Evaluating the Efficiency of Black Soldier Fly (Hermetia illucens) Larvae in Converting Mackerel Head Waste into Valuable Resources.

The seafood processing industry generates significant waste, including mackerel heads (MH), constituting 20-32% of total waste. This study explored the potential of utilizing MH as a feed source for black soldier fly larvae (BSF larvae). BSF larvae are known for their ability to efficiently convert organic materials into nutrient-rich biomass. Five concentrations of MH (0, 10, 20, 30, 40, and 50% in chicken feed) were fed to BSF larvae for eight days. After harvesting, their growth, MH conversion efficiency, nutritional content, and heavy metals reduction potential were measured. BSF larvae showed optimal growth when fed with a feed containing 20% MH, resulting in a 14.36-fold increase in weight compared to the control group, as determined by the Fisher's Least Significant Difference Test. BSF larvae maintained a survival rate of 99.33%. With the lowest feed conversion ratio (FCR) of 2.09 at 20% MH, feed efficiency was improved by up to 65.15%, and feed reduction up to 73.53%. MH enhanced lipid and protein content in BSF larvae. Furthermore, BSF larvae in this study showed higher polyunsaturated fatty acids (PUFA), including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), as well as other amino acids which are required for breeding animals. The current study highlights the potential of MH as a feed source for BSF larvae, improving nutritional biomass. It also suggests BSF larvae as an eco-friendly option for handling seafood processing waste and as an alternative feed source for animals.

High-Temperature Hydrothermal Extraction of Phenolic Compounds from Brewer's Spent Grain and Malt Dust Biomass Using Natural Deep Eutectic Solvents.

Aligned with the EU Sustainable Development Goals 2030 (EU SDG2030), extensive research is dedicated to enhancing the sustainable use of biomass waste for the extraction of pharmaceutical and nutritional compounds, such as (poly-)phenolic compounds (PC). This study proposes an innovative one-step hydrothermal extraction (HTE) at a high temperature (120 °C), utilizing environmentally friendly acidic natural deep eutectic solvents (NADESs) to replace conventional harmful pre-treatment chemicals and organic solvents. Brewer's spent grain (BSG) and novel malt dust (MD) biomass sources, both obtained from beer production, were characterized and studied for their potential as PC sources. HTE, paired with mild acidic malic acid/choline chloride (MA) NADES, was compared against conventional (heated and stirred maceration) and modern (microwave-assisted extraction; MAE) state-of-the-art extraction methods. The quantification of key PC in BSG and MD using liquid chromatography (HPLC) indicated that the combination of elevated temperatures and acidic NADES could provide significant improvements in PC extraction yields ranging from 251% (MD-MAC-MA: 29.3 µg/g; MD-HTE-MA: 103 µg/g) to 381% (BSG-MAC-MA: 78 µg/g; BSG-HTE-MA: 375 µg/g). The superior extraction capacity of MA NADES over non-acidic NADES (glycerol/choline chloride) and a traditional organic solvent mixture (acetone/H2O) could be attributed to in situ acid-catalysed pre-treatment facilitating the release of bound PC from lignin-hemicellulose structures. Qualitative 13C-NMR and pyro-GC-MS analysis was used to verify lignin-hemicellulose breakdown during extraction and the impact of high-temperature MA NADES extraction on the lignin-hemicellulose structure. This in situ acid NADES-catalysed high-temperature pre-treatment during PC extraction offers a potential green pre-treatment for use in cascade valorisation strategies (e.g., lignin valorisation), enabling more intensive usage of available biomass waste stream resources.