Black phosphorus film as Q-switcher in neodymium-doped fiber laser.

We present the successful development of a 1089.4 nm Q-switched laser employing a neodymium-doped fiber (NDF) as the active fiber and black phosphorus (BP) as the saturable absorber (SA). The BP SA was fabricated by inserting BP compound into a polyvinyl alcohol (PVA) host polymer, exhibiting a saturable absorption of 2.8 %. Integrated into an NDFL ring cavity, the SA modified the cavity loss, enabling the production of Q-switched pulses. With an increase in the 808 nm pumping power from 108.6 to 155.9 mW, the laser output pulse duration decreased from 3.74 to 3.54 µs, while the repetition rate improved from 40.6 to 51.0 kHz. The laser demonstrated a stable pulse train output, with a fundamental frequency signal to background noise ratio of 45.78 dB. The highest pulse energy of 1.3 nJ was recorded at 155.9 mW pump power. To the best of our knowledge, this represents the first utilization of BP as a SA or Q-switcher within an NDFL cavity.

Engineering Coatings Inspired by Cell Membrane Thermal Dynamics to Enhance Photothermal Therapy and Osteogenesis for Implant Infections.

Photothermal therapy (PTT) encounters challenges of rapid thermal loss and potential tissue damage. In response, we propose a Heat-Boost and Lock implant coating strategy inspired by the thermal adaptation of biological membranes, enabling precise local photothermal utilization. This coating incorporates a poly(tannic acid) (pTA) bridging layer on implants, facilitating stable layer-by-layer integration of a black phosphorus (BP) photothermal layer and a top cell membrane Heat-Boost and Lock layer. The cell membrane layer significantly curtails photothermal loss (extending the heat retention by 17.62%) and stores energy within its phospholipid bilayer, boosting photothermal effects near implants (achieving a temperature increasement of 275%). Theoretical analysis indicates that these local heat preservation properties of the cell membrane arise from its low thermal conductivity and phase-change properties. In a Staphylococcus aureus-infected bone implant model, our coating demonstrates precise antibacterial action around implants (reach an antibacterial ratio of 99.52%). The synergetic locking function of cell membrane and pTA delays BP biodegradation, ensuring favorable photothermal stability and long-term osteo-inductive performance (increasing the bone volume fraction by 53.45%). Beyond providing an endogenic biointerface, this strategy extends the application of cell membrane in local thermal management, offering possibilities for effective and safe PTT modalities.

Pressure-Induced Molding of Black Phosphorus@Ti3C2Tx Composite Electrode and Its Implications on the Lithium Storage.

For the first time, an innovative pressure quenching technique is used to create the integrated electrode of the black phosphorus (BP) @Ti3C2Tx composite material, doing away with the requirement for adhesive additives and simplifying time-consuming processes. Through the formation of Ti-O-P bonds with BP, Ti3C2Tx MXenes can function as conductive additives and affect the interlayer gap. Additionally, we have found that there is a critical synthetic pressure threshold (300 kN) at which the performance of BP@Ti3C2Tx-integrated electrodes can be improved: too high of a pressure prevents lithium-ion transport because of mesopore reduction; too low of a pressure prevents Ti-O-P chemical bond formation between the two components; and suboptimal pressure does not allow for density enhancement for better electron conduction. The integrated electrode produced at 300 kN shows a discharge capacity of about 724.9 mA h/g at 0.1 A/g current density after 100 cycles, which is much larger than that obtained at 50 kN (270.2 mA h/g). Furthermore, the capacity can remain steady at 560.74 mA h/g even after 500 lengthy cycles at the high current density of 0.5 A/g. Significantly lower resistance (1.10 × 102 Ω at 300 kN; 2.02 × 103 Ω at 50 kN) and faster reaction kinetics are responsible for this improvement. This study offers a new, straightforward, and broadly useful technique for creating integrated electrodes and BP-based composite materials.

Graphene Oxide/Black Phosphorus Functionalized Collagen Scaffolds with Enhanced Near-Infrared Controlled In Situ Biomineralization for Promoting Infectious Bone Defect Repair through PI3K/Akt Pathway.

Infectious bone defects resulting from surgery, infection, or trauma are a prevalent clinical issue. Current treatments commonly used include systemic antibiotics and autografts or allografts. Nevertheless, therapies come with various disadvantages, including multidrug-resistant bacteria, complications arising from the donor site, and immune rejection, which makes artificial implants desirable. However, artificial implants can fail due to bacterial infections and inadequate bone fusion after implantation. Thus, the development of multifunctional bone substitutes that are biocompatible, antibacterial, osteoconductive, and osteoinductive would be of great clinical importance. This study designs and prepares 2D graphene oxide (GO) and black phosphorus (BP) reinforced porous collagen (Col) scaffolds as a viable strategy for treating infectious bone defects. The fabricated Col-GO@BP scaffold exhibited an efficient photothermal antibacterial effect under near-infrared (NIR) irradiation. A further benefit of the NIR-controlled degradation of BP was to promote biomineralization by phosphorus-driven and calcium-extracted phosphorus in situ. The abundant functional groups in GO could synergistically capture the ions and enhance the in situ biomineralization. The Col-GO@BP scaffold facilitated osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSC) by leveraging its mild photothermal effect and biomineralization process, which upregulated heat shock proteins (HSPs) and activated PI3K/Akt pathways. Additionally, systematic in vivo experiments demonstrated that the Col-GO@BP scaffold obviously promotes infectious bone repair through admirable photothermal antibacterial performance and enhanced vascularization. As a result of this study, we provide new insights into the photothermal activity of GO@BP nanosheets, their degradation, and a new biological application for them.

Two-Pronged Attack: Dual Activation of Fat Reduction Using Near-Infrared-Responsive Nanosandwich for Targeted Anti-Obesity Treatment.

Excessive fat accumulation and chronic inflammation are two typical characteristics of obesity. AMP-activated protein kinase (AMPK), a master regulator of energy metabolism, is involved in adipogenesis, lipogenesis, and inflammation modulation in adipose tissue (AT). Thus, effective lipid reduction and anti-inflammation through AMPK regulation play vital roles in treating obesity. Herein, an anti-obesity nanosandwich is fabricated through attaching polymetformin (PolyMet) onto photothermal agent black phosphorus nanosheets (BP). PolyMet activates AMPK to inhibit adipogenesis, promote browning, and mitigate AT inflammation by decreasing macrophage infiltration, repolarizing macrophage phenotype, and downregulating pro-inflammatory cytokines. Additionally, BP induces lipolysis and apoptosis of adipocytes and macrophages through a photothermal effect. By further functionalization using hyaluronic acid (HA) and MMP2 substrate-linking P3 peptide-modified HA (P3-HA), an enhanced anti-obesity effect is obtained by dual-targeting of P3 and HA, and HA-mediated CD44 poly-clustering after MMP2 cleavage. Upon laser irradiation, the designed nanosandwich (P3-HA/PM@BP) effectively inhibits obesity development in obese mice, increases M2/M1 ratio in AT, reduces the serum levels of cholesterol/triglyceride and improves insulin sensitivity, exhibiting promising research potential to facilitate the clinical development of modern anti-obesity therapies.

Site-Specific Location of Black Phosphorus Quantum Dot Cluster-Based Nanocomplexes for Synergistic Ion Channel Therapy and Hypoxic Microenvironment Activated Chemotherapy.

The spatiotemporal regulation of ion transport in living cell membrane channels has immense potential for providing novel therapeutic approaches for the treatment of currently intractable diseases. So far, most strategies suffer from uncontrolled ion transport and limited tumor therapy effects. On the premise of low toxicity to healthy tissues, enhancing the degree of ion overloading and the effect of tumor treatment still remains a challenging concern. Herein, an innovative strategy for synergistic ion channel therapy and hypoxic microenvironment activated chemotherapy is proposed. Biocompatible AQ4N/black phosphorus quantum dot clusters@liposomes (AQ4N/BPCs@Lip) nanocomplexes are site-specifically immobilized on the living cell membrane by a metabolic labeling strategy, eliminating the need for modifying or genetically encoding channel structures. Ascribing to the localized temperature increase of BPCs under NIR light irradiation, Ca2+ overinflux can be remotely controlled and the overloading degree was increased; moreover, the local released AQ4N can only be activated in the tumor cell, while it has no toxicity to normal cells. Compared with single intracellular Ca2+ overloading, the tumor cell viabilities decrease 2-fold with synergetic Ca2+ overloading-induced ion channel therapy and hypoxic microenvironment activated chemotherapeutics. Our study demonstrates the example of a remote-controlled ion influx and drug delivery system for tumor therapy.

Two-Dimensional Materials/Biopolymer-Based Antimicrobial Coatings to Thwart Biofilm Formation on Medical Implants.

Infections associated with medical implants due to bacterial adhesion and biofilm formation are a serious problem, leading to acute health risks to patients by compromising their immune system. Therefore, suppressing biofilm formation on biomedical implants is a challenging task, especially for overcoming the drug resistance of bacterial biofilms. Herein, a synergistic efficient surface coating method was developed to inhibit biofilm formation on a model medical implant by combining the antimicrobial property of trimethyl chitosan (TMC) with either 2D material graphene oxide (GO) or black phosphorus (BP) sheets using layer-by-layer (LbL) self-assembly. The multilayer coatings of TMC/GO and TMC/BP were optimized on the glass surface (a model implant) and characterized by using spectroscopic and microscopy techniques. Next, we investigated the antibiofilm formation properties of the TMC/GO and TMC/BP coatings on glass surfaces against both Gram-negative, Escherichia coli (E. coli), and Gram-positive, Bacillus subtilis (B. subtilis), bacteria. The antibiofilm formation was studied using crystal violet (CV) and live/dead assays. Both the live/dead and the CV assays confirmed that the TMC/2D material (2DM)-coated surfaces prevented biofilm formation much more effectively compared to the uncoated surfaces. Scanning electron microscopy analyses revealed that the bacteria were affected physically by incubating with TMC/2DM-coated surfaces due to membrane perturbation, thereby preventing cell attachment and biofilm formation. Further, BP composite coatings (TMC/BP) showed a much better ability to thwart biofilm formation than GO composite coatings (TMC/GO). Also, multilayer coatings showed superior cytocompatibility with human foreskin fibroblast (HFF). Our results demonstrate that the developed coatings TMC/2DMs could be potential candidates for thwarting biofilm formation on medical implants.

Black phosphorus nanosheets induce autophagy dysfunction by a size- and surface modification-related impairment of lysosomes in macrophages.

The widespread application of black phosphorus nanosheets (BPNSs) raises concerns about their potential impact on human health. Although that the autophagy-inducing properties of BPNSs in cancer cells are documented, their effects on macrophages-key components of the immune system and the mechanisms involved remain obscure, especially in terms of the influences of BPNS the size and surface modifications on the autophagic process. This study investigated the effects of bare BPNSs and PEGylated BPNSs (BP-PEG) on macrophage autophagy and its underlying mechanisms by comprehensive biochemical analyses. The results indicated that both BPNSs and BP-PEG are internalized by RAW264.7 cells through phagocytosis and caveolin-dependent endocytosis, leading to lysosomal accumulation. The internalized BPNSs induced mitochondrial dysfunction, which subsequently elevated the NAD+/NADH ratio and activated the SIRT-1 pathway, initiating autophagy. However, BPNSs disrupted the autophagic flux by impairing autolysosome formation, leading to apoptosis in a size-dependent manner. In contrast, BP-PEG preserved lysosomal integrity, maintaining autophagic activity and cell viability. These findings deepen our understanding of the influence of nanosheet size and surface modifications on macrophage autophagy, contributing to the formulation of regulatory guidelines to minimize the potential adverse effects and health risks associated with BPNS utilization in various applications.

Investigations of Crucial Factors for the Non-Covalent Functionalization of Black Phosphorus (BP) using Perylene Diimide Derivatives for the Passivation of BP Nanosheets.

The non-covalent functionalization of black phosphorus (BP) was studied with a scope of ten tailor-made perylene diimides (PDIs). A combination of UV/Vis-, fluorescence-, as well as Raman spectroscopy and atomic force microscopy was used to investigate the structural factors, which contribute to a pronounced PDI-BP interaction and thus support the protection of BP nanosheets against oxidative degradation. We were able to show, that water-soluble, amphiphilic PDIs with highly charged head groups can be used for the non-covalent functionalization of BP in aqueous media. Here, based on the hydrophobic effect, an efficient adsorption of the respective PDI molecules takes place and leads to the formation of a passivating film, yielding a considerable stabilization of the BP flakes under ambient conditions exceeding 30 days.

Redox-Active Polyaniline Covalently grafted Black Phosphorus Nanosheets for Integrated Digital-Analogue Memristors.

Surface covalent modification of black phosphorus (BP) with organic polymers represents a promising strategy to enhance its stability and tailor its electronic properties. Despite this potential, developing memristive materials through suitable polymer structures, grafting pathways, and polymerization techniques remains challenging. In this study, polyaniline (PANI)-covalently grafted black phosphorus nanosheets (BPNS) are successfully prepared with redox functionalities via the in situ polymerization of aniline on the surface of 4-aminobenzene-modified BPNS. The PANI coating protects the BP from direct exposure to oxygen and water, and it endows the material with analog memristive properties, characterized by a continuously adjustable resistance within a limited voltage scan range. When subjected to a broader voltage scan, the Al/PANI-g-BPNS/ITO device demonstrates a typical bistable digital memristive behavior. The integration of both digital and analog memristive functionalities in a single device paves the way for the development of high-density, multifunctional electronic components.

3D printed biopolymer/black phosphorus nanoscaffolds for bone implants: A review.

Bone implantation is one of the recognized and effective means of treating bone defects, but osteoporosis and bone tumor-related bone abnormalities have a series of problems such as susceptibility to infection, difficulty in healing, and poor therapeutic effect, which poses a great challenge to clinical medicine. Three-dimensional things may be printed using 3D printing. Researchers can feed materials through the printer layer by layer to create the desired shape for a 3D structure. It is widely employed in the healing of bone defects, and it is an improved form of additive manufacturing technology with prospective future applications. This review's objective is to provide an overview of the findings reports pertaining to 3D printing biopolymers in recent years, provide an overview of biopolymer materials and their composites with black phosphorus for 3D printing bone implants, and the characterization methods of composite materials are also summarized. In addition, summarizes 3D printing methods based on ink printing and laser printing, pointing out their special features and advantages, and provide a combination strategy of photothermal therapy and bone regeneration materials for black phosphorus-based materials. Finally, the associations between bone implant materials and immune cells, the bio-environment, as well as the 3D printing bone implants prospects are outlined.

Rapidly molded sodium alginate/soy protein adhesive hydrogel with 808-nm laser inhibition of infected wounds.

Infected wounds produce pus and heal slowly. To address this issue, we developed a rapid-setting SP/SA@BP-C hydrogel by combining sodium alginate (SA) and soy protein (SP) with black phosphorus (BP) grafted with clarithromycin (Cla) and incorporating Ca2+ for chelation. This hydrogel dressing exhibits excellent photothermal (PT) and photodynamic (PD) bacteriostatic effects without biotoxicity, making it suitable for treating infected wounds. Characterization confirmed its successful fabrication, and the bacteriostatic effect demonstrated over 99 % efficacy through the synergistic effects of PT, PD, and Cla. Cellular studies indicated nontoxicity and a promoting effect on cell proliferation (121.6 %). In the mouse-infected wound model, the hydrogel led to complete healing in 12 days, with good recovery of the skin's superficial dermal layer and appendages. Consequently, SP/SA@BP-C is a natural hydrogel dressing with promising properties.

Black phosphorus for bone regeneration: Mechanisms involved and influencing factors.

BP has shown good potential for promoting bone regeneration. However, the understanding of the mechanisms of BP-enhanced bone regeneration is still limited. This review first summarizes the recent advances in applications of BP in bone regeneration. We further highlight the possibility that BP enhances bone regeneration by regulating the behavior of mesenchymal stem cells (MSCs), osteoblasts, vascular endothelial cells (VECs), and macrophages, mainly through the regulation of cytoskeletal remodeling, energy metabolism, oxidation resistance and surface adsorption properties, etc. In addition, moderating the physicochemical properties of BP (i.e., shape, size, and surface charge) can alter the effects of BP on bone regeneration. This review reveals the underlying mechanisms of BP-enhanced bone regeneration and provides strategies for further material design of BP-based materials for bone regeneration.

Lateral Heterostructures Fabricated via Artificial Pressure Gradient.

Hydrostatic conditions are generally pursued in high-pressure research, maintained to prevent the intrinsic pressure gradient on the culets of diamond anvil cells (DACs) from introducing heterogeneity to the structure and physical properties of the regulated materials. Here, a pioneering route to fabricate lateral heterostructures is proposed via artificial pressure gradients intentionally designed in DACs. Under the tailored pressure gradients, different structural phases emerge in distinct parts of the material, resulting in the formation of heterostructures. Harnessing the polymorphic transition nature of violet phosphorus under high pressure, violet/blue and violet/black phosphorus lateral heterostructures with different electrical properties have been successfully prepared by the pressure gradient method. This achievement highlights the potential of artificial pressure gradients as a portable and universal strategy for the fabrication of lateral heterostructures, shedding new light on the preparation and regulation of lateral heterostructures across a wider range of materials.

Vibrational Fermi Resonance in Atomically Thin Black Phosphorus.

Fermi resonance is a phenomenon involving the hybridization of two coincidentally quasi-degenerate states that is observed in the vibrational or electronic spectra of molecules. Despite numerous examples in molecular systems, vibrational Fermi resonances in dispersive semiconducting systems remain largely unexplored due to the rarity of occurrence. Here we report a vibrational Fermi resonance in atomically thin black phosphorus. The Fermi resonance arises via anharmonic mixing of a fundamental Raman mode and a Davydov component of an infrared mode, leading to a doublet with mixed character. The extent of Fermi coupling can be modulated by the application of external biaxial strain. The consequences of Fermi hybridization are revealed by electronic resonance effects in the thickness-dependent and excitation-wavelength-dependent Raman spectrum, which is predicted by ab initio hybrid functional simulations including excitonic interactions. This work reveals new insight into electron-phonon coupling in black phosphorus and demonstrates a novel method for modulating Fermi resonances in 2D semiconductors.

Nerve Regeneration Potential of Antioxidant-Modified Black Phosphorus Quantum Dots in Peripheral Nerve Injury.

Peripheral nerve injury is a major societal concern. Black phosphorus (BP) has inherent advantages over cell-based therapies in regenerative medicine. However, controlling spontaneous degradation and size-dependent cytotoxicity remains challenging and poses difficulties for clinical translation. In this study, we constructed zero-dimensional BP quantum dots (QDs) modified with antioxidant ß-carotene and comprehensively investigated them in Schwann cells (SCs) to elucidate their potential for peripheral nerve repair. In vitro experiments demonstrated that BPQD@ß-carotene has an inappreciable toxicity and good biocompatibility, favoring neural regrowth, angiogenesis, and inflammatory regulation of SCs. Furthermore, the PI3K/Akt and Ras/ERK1/2 signaling pathways were activated in SCs at the genetic, protein, and metabolite levels. The BPQD@ß-carotene-embedded GelMA/PEGDA scaffold enhanced functional recovery by promoting axon remyelination and regeneration and facilitating intraneural angiogenesis in peripheral nerve injury models of rats and beagle dogs. These results contribute to advancing knowledge of BP nanomaterials in tissue regeneration and show significant potential for application in translational medicine.

Radiofrequency-responsive black phosphorus nanogel crosslinked with cisplatin for precise synergy in multi-modal tumor therapies.

Radiofrequency-responsive nanoparticles (RFNPs) have drawn increasingly attentions as RF energy absorbing antenna to enhance antitumor efficacy of radiofrequency ablation (RFA). However, it remains a huge challenge for inorganic RFNPs to precisely synergize RFA with other antitumor modes in a clinically acceptable way on bio-safety and bio-compatibility. In this work, RF-responsive black phosphorus (BP) nanogel (BP-Pt@PNA) was successfully fabricated by crosslinking coordination of cisplatin with BP and temperature sensitive polymer PNA. BP-Pt@PNA exhibited strong RF-heating effect and RF-induced pulsatile release of cisplatin. Under RF irradiation, BP-Pt@PNA exhibited cytotoxic enhancement on 4T1 cells. By the synergistic effect of BP and cisplatin, BP-Pt@PNA achieved RF-stimulated systemic immune effect, thus induced enhance suppression on tumor growth and metastasis. Moreover, BP-Pt@PNA realized long-term drug retention in tumor and favorable embolization to tumor-feeding arteries. With high drug loading capacity and favorable bio-safety and bio-degradability, BP-Pt@PNA is expected as an ideal RFNP for precisely synergizing RFA with other antitumor modes in clinical application.

Fibrin-konjac glucomannan-black phosphorus hydrogel scaffolds loaded with nasal ectodermal mesenchymal stem cells accelerated alveolar bone regeneration.

BACKGROUND: Effective treatments for the alveolar bone defect remain a major concern in dental therapy. The objectives of this study were to develop a fibrin and konjac glucomannan (KGM) composite hydrogel as scaffolds for the osteogenesis of nasal mucosa-derived ectodermal mesenchymal stem cells (EMSCs) for the regeneration of alveolar bone defect, and to investigate the osteogenesis-accelerating effects of black phosphorus nanoparticles (BPNs) embedded in the hydrogels. METHODS: Primary EMSCs were isolated from rat nasal mucosa and used for the alveolar bone recovery. Fibrin and KGM were prepared in different ratios for osteomimetic hydrogel scaffolds, and the optimal ratio was determined by mechanical properties and biocompatibility analysis. Then, the optimal hydrogels were integrated with BPNs to obtain BPNs/fibrin-KGM hydrogels, and the effects on osteogenic EMSCs in vitro were evaluated. To explore the osteogenesis-enhancing effects of hydrogels in vivo, the BPNs/fibrin-KGM scaffolds combined with EMSCs were implanted to a rat model of alveolar bone defect. Micro-computed tomography (CT), histological examination, real-time quantitative polymerase chain reaction (RT-qPCR) and western blot were conducted to evaluate the bone morphology and expression of osteogenesis-related genes of the bone regeneration. RESULTS: The addition of KGM improved the mechanical properties and biodegradation characteristics of the fibrin hydrogels. In vitro, the BPNs-containing compound hydrogel was proved to be biocompatible and capable of enhancing the osteogenesis of EMSCs by upregulating the mineralization and the activity of alkaline phosphatase. In vivo, the micro-CT analysis and histological evaluation demonstrated that rats implanted EMSCs-BPNs/fibrin-KGM hydrogels exhibited the best bone reconstruction. And compared to the model group, the expression of osteogenesis genes including osteopontin (Opn, p < 0.0001), osteocalcin (Ocn, p < 0.0001), type collagen (Col , p < 0.0001), bone morphogenetic protein-2 (Bmp2, p < 0.0001), Smad1 (p = 0.0006), and runt-related transcription factor 2 (Runx2, p < 0.0001) were all significantly upregulated. CONCLUSIONS: EMSCs/BPNs-containing fibrin-KGM hydrogels accelerated the recovery of the alveolar bone defect in rats by effectively up-regulating the expression of osteogenesis-related genes, promoting the formation and mineralisation of bone matrix.

Nanosensors Based on Bimetallic Plasmonic Layer and Black Phosphorus: Application to Urine Glucose Detection.

This paper presents a new biosensor design based on the Kretschmann configuration, for the detection of analytes at different refractive indices. Our studied design consists of a TiO2/SiO2 bi-layer sandwiched between a BK7 prism and a bimetallic layer of Ag/Au plasmonic materials, covered by a layer of black phosphorus placed below the analyte-containing detection medium. The different layers of our structure and analyte detection were optimized using the angular interrogation method. High performance was achieved, with a sensitivity of 240 deg/RIU and a quality factor of 34.7 RIU-1. This biosensor can detect analytes with a wide refractive index range between 1.330 and 1.347, such as glucose detection in urine samples using a refractive index variation of 10-3. This capability offers a wide range of applications for biomedical and biochemical detection and selectivity.

Functional black phosphorus-based sensors for food safety applications: A review.

Food safety has garnered global attention, necessitating advanced methods for the quick and accurate detection of contaminants. Sensors, notable for their ease of use, high sensitivity, and fast analysis, are prominent. Two-dimensional (2D) nanomaterials have been employed to improve sensor performance. Particularly, black phosphorus (BP) stands out with its multifunctional capabilities, attributed to unique layered structure, ultra-high charge mobility, easy surface functionalization, enhanced optical absorption, and tunable direct bandgap. These characteristics suggest that BP could significantly enhance sensor selectivity, sensitivity, and response speed for contaminant detection. Despite numerous studies on BP-based sensors in food safety, few reviews have been comprehensively summarized. Moreover, challenges in BP's preparation and stability restrict its wider use. This paper reviews recent research on BP's role in food safety, covering preparation, passivation, and applications. Through analysis of challenges and prospects, this review aims to provide insightful guidance for upcoming research in this area.