Effect of adding ytterbium trifluoride filler particles on the mechanical, physicochemical and biological properties of methacrylate-based experimental resins for 3D printing.

OBJECTIVE: To formulate an experimental methacrylate-based photo-polymerizable resin for 3D printing with ytterbium trifluoride as filler and to evaluate the mechanical, physicochemical, and biological properties. METHODS: Resin matrix was formulated with 60 wt% UDMA, 40 wt% TEGDMA, 1 wt% TPO, and 0.01 wt% BHT. Ytterbium Trifluoride was added in concentrations of 1 (G1 %), 2 (G2 %), 3 (G3 %), 4 (G4 %), and 5 (G5 %) wt%. One group remained without filler addition as control (GC). The samples were designed in 3D builder software and printed using a UV-DLP 3D printer. The samples were ultrasonicated with isopropanol and UV cured for 60 min. The resins were tested for degree of conversion (DC), flexural strength, Knoop microhardness, softening in solvent, radiopacity, colorimetric analysis, and cytotoxicity (MTT and SRB). RESULTS: Post-polymerization increased the degree of conversion of all groups (p < 0.05). G2 % showed the highest DC after post-polymerization. G2 % showed no differences in flexural strength from the G1 % and GC (p > 0.05). All groups showed a hardness reduction after solvent immersion. No statistical difference was found in radiopacity, softening in solvent (ΔKHN%), colorimetric spectrophotometry, and cytotoxicity (MTT) (p > 0.05). G1 % showed reduced cell viability for SRB assay (p < 0.05). SIGNIFICANCE: It was possible to produce an experimental photo-polymerizable 3D printable resin with the addition of 2 % ytterbium trifluoride as filler without compromising the mechanical, physicochemical, and biological properties, comparable to the current provisional materials.

Elastic Property Evaluation of Fiberglass and Epoxy Resin Composite Material Using Digital Image Correlation.

This study focused on evaluating the sensitivity and limitations of the simplified equipment used in the Digital Image Correlation (DIC) technique, comparing them with the analog extensometer, based on the mechanical property data of a composite made of fiberglass and epoxy resin. The objectives included establishing a methodology based on the literature, fabricating samples through manual lamination, conducting mechanical tests according to the ASTM D3039 and D3518 standards, comparing DIC with the analog extensometer of the testing machine, and contrasting the experimental results with classical laminate theory. Three composite plates with specific stacking sequences ([0]3, [90]4, and [±45]3) were fabricated, and samples were extracted for testing to determine tensile strength, modulus of elasticity, and other properties. DIC was used to capture deformation fields during testing. Comparisons between data obtained from the analog extensometer and DIC revealed differences of 11.1% for the longitudinal modulus of elasticity E1 and 5.6% for E2. Under low deformation conditions, DIC showed lower efficiency due to equipment limitations. Finally, a theoretical analysis based on classical laminate theory, conducted using a Python script, estimated the longitudinal modulus of elasticity Ex and the shear strength of the [±45]3 laminate, highlighting a relative difference of 31.2% between the theoretical value of 7136 MPa and the experimental value of 5208 MPa for Ex.

Assessment of Shear Fracture Energy in Hybrid Composites with Natural and Synthetic Fibers.

Composite materials made with synthetic fibers are extensively employed across a diverse array of engineering structures. However, from an environmental point of view, synthetic fibers do not represent the best choice, since they are not renewable and are not biodegradable as natural fibers. This study investigates the application of adhesive joints with hybrid composites, which combine natural and synthetic fibers, as potential replacements for traditional composites made solely from synthetic fibers. The main focus is on assessing the mechanical performance of these hybrid composites through end-notched flexure (ENF) tests on adhesive joints. Four different configurations of substrates were used, two with only one type of fiber (natural or synthetic) and two hybrids. Digital image correlation (DIC) analysis was conducted to provide detailed insights into the changes in displacement fields for the different configurations tested. The results indicate that adhesive joints with hybrid composites exhibit superior shear fracture energy (GIIC) compared with the joints with purely synthetic fibers. This enhancement in fracture toughness, attributed to the synergistic effects of the natural and synthetic fibers, suggests that hybrid composites could be a viable alternative, offering potential benefits in terms of sustainability and cost without compromising mechanical performance.

Color Stability of Single-Shade Resin Composites in Direct Restorations: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

The objective was to compare the color match and color stability behavior of single- and multi-shade resin-based composites (RBCs) used for direct restorations. This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized clinical trials evaluating the shade performance of single-shade RBCs in direct restorations were included. A search of the scientific literature was performed in five databases (April 2024). The meta-analysis was performed using RevMan 5.4, calculating the risk difference (RD) and 95% confidence interval (CI) of the dichotomous outcome using a random effects model. Bias was assessed using the RoB 2.0 tool, and certainty of evidence was assessed using the GRADEpro tool. Four studies were selected, with 263 restorations analyzed. The results showed comparable performance between single-shade RBCs and multi-shade RBCs in terms of color match and color stability over 12 months. Three studies had a low risk of bias with all expected results, and one study had some concerns. The certainty of evidence for color stability was considered low for all follow-up periods due to the small number of events and sample size. According to the United States Public Health Service Evaluation (USPHS) and the World Dental Federation (FDI), there is comparable clinical color performance between single-shade and multi-shade RBCs over 12 months.

Eco-friendly concrete: Combining treated wastewater and recycled aggregates.

The concrete industry is a significant consumer of drinking water and natural aggregates, such as sand and gravel. However, the scarcity of water and aggregate resources and the challenges associated with the disposal of construction and demolition waste prompted the exploration of alternative materials. This study investigates the feasibility of incorporating secondary treated wastewater from UASB reactors followed by trickling filters and mixed recycled aggregates as potential alternatives. To assess the viability of these alternatives, the study considered the replacement of 100% potable water with treated wastewater, as well as varying proportions of recycled gravel (20, 40, 60, 80, and 100%) and recycled sand (10, 20, 30, 40, and 100%). Physical and mechanical properties were negatively affected, but it was possible to reach compressive results over 40 MPa and splitting tensile strength over 4 MPa for almost all mixes. Regarding physical properties, the use of alternative materials caused poorer outcomes for density, water absorption, and air-void ratio. The limited magnitude of these detrimental effects indicates the potential of manufacturing concrete with the addition of combined treated wastewater and recycled aggregate as a viable strategy while enhancing reuse practices.

Influence of viscosity and fiber reinforcement of resin composite on fracture strength and failure mode of restored molars.

OBJECTIVE: To evaluate the fracture behavior of human molars with extensive MOD restorations using short-fiber-reinforced resin composite of varying viscosities. MATERIALS AND METHODS: Human molars were randomly divided into seven groups (n = 12): intact teeth (control); restoration using conventional high-viscosity resin composite without (Filtek Z350XT, 3M) or with fibers (everX Posterior, GC); conventional low-viscosity resin composite without (Filtek Supreme Flowable, 3M) or with fibers (everX Flow Dentin Shade, GC); bulk-fill low-viscosity resin composite (Filtek Bulk Fill Flow, 3M) or with fibers (everX Flow Bulk Shade, GC). Restorations were performed on extensive MOD preparations, following the manufacturers' recommendations for each material. Specimens underwent fracture strength testing (N) and fracture pattern (%) categorized as repairable, possibly repairable, or non-repairable. Results were analyzed using a generalized linear model (N) and Fisher's exact test (%), with α = 0.05. RESULTS: Restorations performed with high-viscosity materials showed fracture strength values similar to the control and higher than those of restorations using low-viscosity resin composites (p < 0.0001), except for the bulk-fill low-viscosity resin composite with fibers (p > 0.05). Teeth restored using low-viscosity resin composite with fibers showed a higher % of repairable and possibly repairable fractures than the control (p = 0.0091). CONCLUSIONS: The viscosity of materials mediated the fracture strength, with restorations using high-viscosity resin composites promoting values similar to the intact tooth; however, the presence of fibers influenced the fracture pattern. CLINICAL SIGNIFICANCE: Teeth with MOD cavities restored with high-viscosity resin composites showed similar fracture strength to intact teeth. Fiber-reinforced low-viscosity resin composite for the base of restoration resulted in a more repairable/possibly repairable fracture pattern.

Comparison of parasitological methods for the identification of soil-transmitted helminths, including Strongyloides stercoralis, in a regional reference laboratory in northwestern Argentina: An observational study.

Soil-transmitted helminths (STH) are a significant public health problem in impoverished communities of tropical and subtropical areas. Improved diagnostic methods are crucial for Neglected Tropical Diseases programs, particularly for S. stercoralis, as traditional methods are inadequate. Thus, it is important to identify the most accurate and efficient methods for the diagnosis of STH. We performed a retrospective study analyzing laboratory data at the Instituto de Investigaciones de Enfermedades Tropicales from 2010 to 2019. The study included data from outpatients referred for stool analysis and public health interventions from urban and rural communities in northern Salta province, Argentina. Samples were included in this analysis if processed through sedimentation/concentration, Baermann, Harada-Mori and McMaster's, with a subgroup that also included Agar plate culture method (APC). Sensitivity was calculated against a composite reference standard. Of the 5625 samples collected, 944 qualified for this analysis, with a prevalence of 11.14% for A. lumbricoides, 8.16% for hookworm, 1.38% for T. trichiura, and 6.36% for S. stercoralis. The sedimentation/concentration method was the most sensitive for A. lumbricoides (96%), compared to the McMaster method, with a sensitivity of 62%. Similarly, for hookworms, sedimentation/concentration was more sensitive than McMaster's, Harada-Mori, and Baermann with sensitivities of 87%, 70%, 43%, and 13%, respectively. Most of these infections were of light intensity. For S. stercoralis, Baermann and sedimentation/concentration methods were the most sensitive, with 70% and 62% respectively, while Harada-Mori was the least sensitive. In a subset of 389 samples also analyzed by the APC, Baermann was more sensitive than APC for detecting S. stercoralis, and both methods were superior to Harada-Mori. Parasitological methods, mostly when used combined, offer adequate opportunities for the diagnosis of STH in clinical and public health laboratories. The incorporation of S. stercoralis into the control strategies of the World Health Organization requires rethinking the current diagnostic approach used for surveys. With sedimentation/concentration and Baermann appearing as the most sensitive methods for this species. Further studies, including implementation assessments, should help in identifying the most adequate and feasible all-STH diagnostic approach.

Poisson function and volume ratio of soft anisotropic materials under large deformations.

Accurate transverse deformation measurements are required for the estimation of the Poisson function and volume ratio. In this study, pure silicone and soft composite specimens were subjected to uniaxial tension, and the digital image correlation method was used to measure longitudinal and in- and out-of-plane transverse stretches. To minimize the effects of measurement errors on parameter estimation, the measured transverse stretches were defined in terms of the longitudinal stretch using a new formulation based on Poisson's ratios and two stretch-dependent parameters. From this formulation, Poisson functions and volume ratio for soft materials under large deformations were obtained. The results showed that pure silicone can be considered isotropic and nearly incompressible under large deformations, as expected. In contrast, Poisson's ratio of silicone reinforced with extensible fabric can exceed classical bounds, including negative value (auxetic behavior). The incompressibility assumption can be employed for describing the stress-stretch curve of pure silicone, while volume ratios are required for soft composites. Data of human skin, aortic wall, and annulus fibrosus from the literature were selected and analyzed. Except for the aortic wall, which can be considered nearly incompressible, the studied soft tissues must be regarded as compressible. All tissues presented anisotropic behavior.

Selamento dentinário imediato em restauração semidireta: relato de caso / Immediate dentin sealing in semi-direct restoration: case report

O selamento dentinário imediato é um procedimento essencial na Odontologia, que envolve a aplicação de agentes de selamento na interface entre a dentina e o material restaurador imediatamente após a remoção da cárie e do preparo da cavidade dentária. Este processo busca selar os túbulos dentinários expostos, proporcionando proteção à polpa dentária. O presente caso foi realizado em um paciente do sexo masculino, 56 anos que se queixou de desconforto no elemento dentário 17. Após avaliação clínica e radiográfica, foi constatado uma ampla restauração desadaptada na porção mesio - oclusal do referido dente, sendo que o elemento em questão não possui tratamento endodôntico. Após planejamento e assinatura do TCLE, os seguintes passos foram realizados: remoção da lesão cariosa do dente 17, seguido da realização do levantamento marginal mesial e a realização do selamento dentinário imediato. Moldagem com silicone de adição do dente em questão e do antagonista, assim como registro da mordida. Foi confeccionada uma restauração semidireta em resina composta sob o modelo de gesso obtido. A cimentação da restauração foi feita na consulta seguinte, cumprindo os requisitos fundamentais para restaurar forma, função e estética, resultando na melhoria da qualidade de vida do paciente(AU)

Immediate dentin sealing is an essential procedure in dentistry, involving the application of sealing agents at the interface between dentin and the restorative material immediately after caries removal and cavity preparation. This process aims to seal exposed dentinal tubules, providing protection to the dental pulp. The present case involved a 56-year-old male patient who complained of discomfort in tooth number 17. After clinical and radiographic evaluation, a wide, maladapted restoration in the mesio-occlusal portion of the tooth was identified, with no endodontic treatment in the affected element. Following planning and informed consent, the following steps were taken: removal of the carious lesion from tooth number 17, followed by the execution of mesial marginal elevation and immediate dentin sealing. Silicone addition molding of the affected tooth and antagonist, along with bite registration, was performed. A semi-direct restoration in composite resin was fabricated based on the obtained gypsum model. The restoration was cemented in the subsequent appointment, meeting the essential requirements to restore form, function, and aesthetics, resulting in an improvement in the patient's quality of life(AU)

Restauração indireta em resina composta: um relato de prontuário / Indirect resin composite restoration: a dental record report

Restaurações diretas em resina composta são amplamente utilizadas em odontologia para restaurar dentes posteriores. Todavia, quando há grande destruição coronária, onde a distância do istmo excede dois terços da distância intercuspídea, as restaurações indiretas em resina composta são indicadas. O presente estudo teve como objetivo relatar a análise de um prontuário de um paciente que recebeu uma restauração indireta em resina composta em dente posterior amplamente destruído. Através da análise de prontuários de pacientes atendidos nas disciplinas de Estágios Supervisionados do Curso de Odontologia da FSG Centro Universitário no ano de 2023, foi selecionado um prontuário de um paciente que compareceu a clínica odontológica da FSG com uma restauração em amálgama fraturada com reparo em resina composta que apresentou sintomatologia dolorosa. O procedimento diagnóstico ocorreu através de exame clínico e radiográfico, que constatou a indicação de substituição da restauração insatisfatória e realização de uma restauração indireta em resina composta. Os resultados estéticos e funcionais apresentados demostraram a viabilidade da técnica restauradora indireta em resina composta para reabilitar dentes posteriores com ampla destruição coronária(AU)

Direct composite resin restoration are widely used in dentistry to restore posterior teeth. However, when there is large coronary destruction, that the distance from the isthmus exceeds two- thirds of the intercuspal distance, indirect composite resin restorations are indicated. This study aimed to report the analysis of a dental record of a patient who received an indirect restoration in composite resin in a badly destroyed posterior tooth. Through the analysis of dental records of patients seen in the disciplines of Supervised Internship of the Dentistry Course at FSG Centro Universitário in the year 2023, the dental record of a patient who attended the FSG dental clinic with fractured amalgam restoration with composite resin repair was selected who had painful symptoms. The diagnostic procedure took place through clinical and radiographic examination, which revealed the indication of replacing the unsatisfactory restoration and carrying out an indirect restoration in composite resin.The aesthetic and functional results presented demonstrated the viability of the indirect composite resin restoration technique for rehabilitating posterior teeth with extensive coronal destruction(AU)

Restauração em resina composta semidireta em dente posterior: relato de caso / Semi-direct composite restoration in posterior toth: a case report

A escolha da técnica restauradora desempenha papel fundamental na eficácia e duração de um tratamento reabilitador. O objetivo deste relato de caso foi descrever a utilização da técnica semidireta para a confecção de uma restauração em resina composta em um primeiro molar inferior. A paciente apresentava uma restauração insatisfatória no dente 36, que necessitava ser substituída devido à infiltração por cárie. Optou-se pela técnica semidireta devido à amplitude da cavidade, que envolvia estruturas de suporte, e pela combinação das vantagens das abordagens direta e indireta. O procedimento envolveu a remoção de tecido cariado, a aplicação de hidróxido de cálcio pasta, seguida da aplicação de uma fina camada de ionômero de vidro e, posteriormente, resina fluída para realizar o selamento dentinário. O preparo foi realizado seguindo os princípios necessários. O elemento em questão foi moldado com silicone de adição e o arco antagonista, com alginato. Ambos modelos foram vertidos com silicone para modelos semirrígidos e montados em oclusor de peças de brinquedo. A restauração semidireta foi confeccionada em resina composta Filtek Z350 XT, respeitando a anatomia do dente 36. Pigmentos foram utilizados para aprimorar detalhes estéticos. Após acabamento e polimento, a peça foi condicionada e cimentada com cimento dual Relyx Ultimate. Pode-se concluir que a abordagem restauradora por meio da técnica semidireta construída em modelo semirrígido é uma opção terapêutica conservadora e vantajosa para dentes com extensa destruição coronária. Essa técnica possibilita a restauração de forma eficaz, garantindo tanto a estética quanto a função adequada do dente afetado(AU)

The choice of restorative technique plays a fundamental role in the effectiveness and duration of rehabilitation treatment. The objective of this case report was to describe the use of the semi-direct technique to create a composite resin restoration in a lower first molar. The patient had an unsatisfactory restoration on tooth 36, which needed to be replaced due to cavity infiltration. The semi-direct technique was chosen due to the amplitude of the cavity, which involved support structures, and the combination of advantages of the direct and indirect approaches. The procedure involved the removal of carious tissue, and the application of calcium hydroxide paste, followed by the application of a thin layer of glass ionomer and, subsequently, fluid resin to seal the dentin. The preparation was carried out following the necessary principles. The element in question was molded with addition silicone and the antagonist arch was molded with alginate. Both models were poured with silicone for semi-rigid models and mounted on toy parts occluders. The semi-direct restoration was made in Filtek Z350 XT composite resin, respecting the anatomy of tooth 36. Pigments were used to improve aesthetic details. After finishing and polishing, the piece was conditioned and cemented with Relyx Ultimate dual cement. It can be concluded that the restorative approach using the semi-direct technique built on a semi-rigid model is a conservative and advantageous therapeutic option for teeth with extensive coronal destruction. This technique allows for effective restoration, ensuring both the aesthetics and adequate function of the affected tooth(AU)

Abordagem estética e conservadora para fechamento de múltiplos diastemas: relato de caso / Aesthetic and conservative approach to multiple diastema closure: case report / Enfoque estético y conservador para el cierre de múltiples diastemas: relato de caso

Introdução:Na odontologia moderna, a estética vem ocupando um espaço cada vez mais expressivo, e o desejo por dentes mais brancos, a insatisfação com o alinhamento dos dentes e com a anatomia dentária, têm sido os motivos mais relevantes de procura dos pacientes nos consultórios odontológicos.Objetivo:O presente artigo tem como objetivo descrever, através de relato de caso clínico, uma abordagem terapêutica estética e conservadora para fechamento de múltiplos diastemas anterossuperiores com a utilização de facetas de resina composta.Relato de caso:Paciente do sexo masculino, 21 anos de idade, procurou atendimento queixando-se de insatisfação estética pelos diastemas apresentados. Por meio de um planejamento digital das facetas em resina, com mockup e modelo impresso em 3D, as restaurações foram feitas respeitando anatomia, forma, opacidade e cores dos dentes naturais do paciente. O resultado dos procedimentos adotados foi satisfatório, demonstrando que a técnica empregada foi eficaz, sendo capaz de devolver um sorriso estético e biológico ao paciente. A odontologia contemporânea tem ofertado cada vez mais materiais com capacidade de devolver estética e função em dentes de forma minimamente invasivas, além de passar total confiabilidade em tratamentos a longo prazo, agradando o paciente desde a apresentação digital do planejamento traçado pelo cirurgião dentista com previsibilidade dos resultados, até o momento final do tratamento.Conclusões:O recontorno estético com resina composta representa uma opção funcional e de baixo custo para o tratamento de pacientes que apresentam diastemas múltiplos, principalmente em pacientes jovens pela preservação daestrutura dentária e possibilidade de reparo, sendo considerado um procedimento reversível, rápido e de baixo custo (AU).

Introduction:Aesthetics have been occupying an increasingly significant role in modern dentistry, and the desire for whiter teeth, dissatisfaction with tooth alignment, and dental anatomy concerns have been the most relevant reasons for patients seeking dental care. Objective:This article aims to describe an aesthetic and conservative therapeutic approach for closing multiple anterior upper diastemas using composite resin veneers in a clinical case report. Case report:A 21-year-old male patient sought treatment, expressing dissatisfaction with the diastemas he had. The restorations were performed using digital planning of the resin veneers with a mockup and a 3D-printed model, while respecting the patient's natural tooth anatomy, shape, opacity, and colors. The results of the adopted procedures were satisfactory, demonstrating effectiveness of the employed technique in restoring an aesthetic and biologically harmonious smile to the patient. Contemporary dentistry has been offering increasingly more materials capable of providing aesthetics and function to teeth through minimally invasive approaches. This not only ensures long-term treatment reliability, but also pleases the patient with a digital presentation of the treatment plan outlined by the dentist, predicting the results up to the final stages of the treatment. Conclusions:Aesthetic contouring using composite resin presents a functional and cost-effective option for treating patients with multiple diastemas, especially among young patients due to its preservation of dental structure, repair potential, and being considered a reversible, fast, and low-cost procedure (AU).

Introducción: En la odontología moderna, la estética viene ocupando un espacio cada vez más destacado, y las ganas de tener dientes más blancos, la insatisfacción con el alineamiento de los dientes, y la anatomía dental son las razonesmás relevantes por las cuales los pacientes acuden a las consultas odontológicas. Objetivo:El presente artículo tiene como objetivo describir, a través de un relato de caso clínico, un abordaje terapéutico estético y conservador para el cierre de múltiples diastemas anterosuperiores mediante el uso de carillas de resina compuesta. Informe de caso:Paciente del sexo masculino, 21 años de edad, buscó atendimiento quejándose de insatisfacción estética debido a los diastemas presentados. A través de una planificación digital de las carillas en resina, con un mockup y un modelo impreso en 3D, las restauraciones fueron ejecutadas, respetándose la anatomía, forma, opacidad y colores de los dientes naturales del paciente. El resultado de los procedimientos adoptados fue satisfactorio y demostró que la técnica utilizada fue eficaz, siendo capaz de restituir una sonrisa estética y funcional al paciente. La odontología contemporánea viene ofreciendo cada vez más materiales con la capacidad de devolver estética y función a los dientes de maneras mínimamente invasivas, además de brindar total confiabilidad en tratamientos a largo plazo, satisfaciendo al paciente desde la presentación digital del plan trazado por el cirujano dentista con la previsibilidad de los resultados, hasta el momento final del tratamiento. Conclusiones:El recontorneado estético con resina compuesta representa una opción funcional y de bajo costo para el tratamiento de pacientes con múltiples diastemas, especialmente en pacientes jóvenes, debido a la preservación de la estructura dental y la posibilidad de reparación. Se considera, de este modo, que se trata de un procedimiento reversible, rápido y económico (AU).

Clinical evaluation of a new chemically-cured bulk-fill composite in posterior restorations: 6-month multicenter double-blind randomized clinical trial.

OBJECTIVE: To evaluate the postoperative sensitivity (POS), as well as the clinical performance of posterior restorations using a new chemically-cured bulk-fill composite (Stela Automix and Stela Capsule, SDI) comparing with a light-cured bulk-fill composite after 6 months. METHODS: Fifty-five participants with at least three posterior teeth needing restoration were recruited. A total of 165 restorations were performed on Class I or Class II cavities. After the application of Stela primer, the chemically-cured composite (Stela Automix or Stela Capsule) was inserted. For the light-cured composite group, a universal adhesive (Scotchbond Universal) was applied with a bulk-fill composite (Filtek One). Participants were evaluated for spontaneous and stimulated POS in the baseline, after 48 h, 7 days, and 6 months. Additionally, each restoration was assessed using the updated version of FDI criteria after 6 months. The differences in the proportions of the groups were compared by Cochran test statistics (α = 0.05). RESULTS: Both chemically-cured composites showed a lower risk of POS compared to the light-cured composite at baseline and up to 48 h (p < 0.04). A significantly lower surface luster and texture was observed for the Stela Capsule composite compared to the light-cured bulk-fill composite (baseline and 6 months; p = 0.03). A significant color mismatch was observed for the light-cured bulk-fill composite compared to the chemically-cured composites (baseline and 6 months; p = 0.03). No significant differences were observed in any other item evaluations (p > 0.05). CONCLUSION: Chemically-cured composites exhibit lower postoperative sensitivity and less color mismatch compared to a light-cured bulk-fill composite after 6 months of clinical service. CLINICAL SIGNIFICANCE: The chemically-cured composites appear to be an appealing option for restoring posterior teeth, as they exhibit lower postoperative sensitivity compared to a light-cured bulk-fill composite, both at baseline and up to 48 h, and less color mismatch.

Investigation into the effect of the culture conditions and optimization on limonene-1,2-diol production from the biotransformation of limonene using Pestalotiopsis mangiferae LaBMicrA-505.

Different bioproducts can be obtained by changing operative condition of biotechnological process, and this bioprocess aspect is a significant approach to be adopted on industrial scale leading to the creation of new natural aroma. Thus, this study aimed to investigate the culture conditions and optimization of the biotransformation of limonene into limonene-1,2-diol using Pestalotiopsis mangiferae LaBMicrA-505 obtained from the Brazilian Amazon. The study started with the investigation of the establishment of culture, followed by optimization of the conditions for biotransformation of R-(+)-limonene to limonene-1,2-diol, using shake flasks. The fresh biomass of P. mangiferae LaBMicrA-505 obtained in liquid media supplemented with yeast-malt extract under with 72 h (stationary phase) performed better diol productivity when compared to other biomasses. Finally, in the modeling of contour plots and surface responses of a central composite design, the use of 4 g l- 1 biomass, 2% of the substrate at 24 °C, 120 rpm, and pH of 6.0 could maximize the production of limonene-1,2-diol, accumulated up to 98.34 ± 1.53% after 96 h of reaction. This study contributed to identified operational condition for the R-(+)-limonene bioconversion scale-up. The endophytic fungus P. mangiferae LaBMicrA-505 proved to be a potent biocatalyst to biotechnologically produce limonene-1,2-diol, an aroma compounds with interesting bioactive features that up to now has been manufactured by extraction from plants with long and not environmentally friendly procedures.

Effect of butylated hydroxytoluene (BHT) concentrations on polymerization shrinkage stress and other physicochemical properties of experimental resin composites.

The present study examined different concentrations of the butylated hydroxytoluene (BHT) inhibitor on the kinetics of conversion, polymerization shrinkage stress, and other correlated physicochemical properties of experimental resin composites (ERC). A model composite was formulated with 75 wt% filler containing 0.5 wt% camphorquinone and 1 wt% amine with BHT concentrations of 0.01 wt% (BHT-0.01); 0.1 wt% (BHT-0.1); 0.25 wt% (BHT-0.25); 0.5 wt% (BHT-0.5); 1 wt% (BHT-1), and control (no BHT). They were tested on polymerization shrinkage stress (PSS; n = 5), degree of conversion (DC; n = 3), maximum polymerization rate (RpMAX; n = 5), water sorption (Wsp; n = 0), and solubility (Wsl; n = 10), flexural strength (FS; n = 10), flexural modulus (FM; n = 10), Knoop microhardness (KH; n = 10), and microhardness reduction (HR; n = 10). Data concerning these tests were submitted to one-way ANOVA and Tukey's test (α = 0.05; ß = 0.2). BHT-0.25, BHT-0.5, and BHT-1 showed a gradually significant decrease in PSS (p = 0.037); however, BHT-1 demonstrated a decrease in the physicochemical properties tested. Thus, within the limitations of this study, it was possible to conclude that BHT concentrations between 0.25 and 0.5 wt% are optimal for reducing shrinkage stress without affecting other physicochemical properties of ERCs.

Corrigendum: Are face transplant candidates choosing autonomously? A preliminary method to evaluate autonomous choosing in psychosocial and bioethical assessments.

[This corrects the article DOI: 10.3389/frtra.2024.1346667.].

Tooth autotransplantation and resin composite reshaping as a multidisciplinary approach for treating dental agenesia: A 10-year follow-up.

CASE REPORT: This case report describes the multidisciplinary approach performed in a 9-year-old male patient with dental agenesia affecting teeth 21 and 22. Autotransplantation of the right upper second premolar with incomplete rhizogenesis to the missing area was combined with coronary reshaping with resin composite and orthodontic therapy. The treatment began with the extraction of the deciduous upper left central incisor, bone preparation for the recipient site of the donor tooth, atraumatic extraction of the right upper second premolar and immediate autotransplantation in the surgically prepared recipient site. Subsequently, sutures to reposition the flap and a rigid splint were performed. After 12 months, coronary reshaping of the autotransplanted tooth with resin composite was carried out. Orthodontic treatment involving the use of a fixed appliance was used to correct the interdental spaces and achieve adequate occlusion. Clinical and radiographic follow-up 10 years after tooth autotransplantation and 9 years after reshaping revealed partial obliteration of the pulp chamber, root resorption, ankylosis and the presence of endodontic treatment. CONCLUSIONS: The long-term outcomes highlighted that tooth autotransplantation represents a biologically and cost-effective procedure for replacing missing teeth in young patients, particularly in cases of incomplete rhizogenesis of the autotransplanted tooth. CLINICAL SIGNIFICANCE: This case report discusses tooth autotransplantation and resin composite reshaping as viable and long-term clinical options for treating young patients with dental agenesis.

Additive manufacturing of bioactive and biodegradable poly (lactic acid)-tricalcium phosphate scaffolds modified with zinc oxide for guided bone tissue repair.

Bioactive and biodegradable scaffolds that mimic the natural extracellular matrix of bone serve as temporary structures to guide new bone tissue growth. In this study, 3D-printed scaffolds composed of poly (lactic acid) (PLA)-tricalcium phosphate (TCP) (90-10 wt.%) were modified with 1%, 5%, and 10 wt.% of ZnO to enhance bone tissue regeneration. A commercial chain extender named Joncryl was incorporated alongside ZnO to ensure the printability of the composites. Filaments were manufactured using a twin-screw extruder and subsequently used to print 3D scaffolds via fused filament fabrication (FFF). The scaffolds exhibited a homogeneous distribution of ZnO and TCP particles, a reproducible structure with 300 µm pores, and mechanical properties suitable for bone tissue engineering, with an elastic modulus around 100 MPa. The addition of ZnO resulted in enhanced surface roughness on the scaffolds, particularly for ZnO microparticles, achieving values up to 241 nm. This rougher topography was responsible for enhancing protein adsorption on the scaffolds, with an increase of up to 85% compared to the PLA-TCP matrix. Biological analyses demonstrated that the presence of ZnO promotes mesenchymal stem cell (MSC) proliferation and differentiation into osteoblasts. Alkaline phosphatase (ALP) activity, an important indicator of early osteogenic differentiation, increased up to 29%. The PLA-TCP composite containing 5% ZnO microparticles exhibited an optimized degradation rate and enhanced bioactivity, indicating its promising potential for bone repair applications.

Composite end points and competing risks analysis.

Composite end points are common primary outcomes in clinical trials. Their main benefit of utilizing a composite outcome is increasing the number of primary outcome events, meaning fewer participants are required to deliver an adequately powered trial. By combining multiple important end points in the primary outcome rather than having to select only 1, composite end points potentially make clinically meaningful benefits easier to detect and avoid ranking outcomes hierarchically. However, there are a number of important considerations when designing and interpreting clinical trials that utilize composite end points. In this Statistical Primer, issues with composite end points such as competing events, halo effect, risk of bias, time-to-event limitations and the win ratio are discussed in the context of real world clinical trials.

The EQ-5D-3L valuation study for Bermuda: using an on-line EQ-VT protocol.

BACKGROUND: In many countries, methods of economic evaluation and Health Technology Assessment are used to inform healthcare resource allocation decisions. These approaches often require EQ-5D health outcomes measures. This study aimed to create an EQ-5D-3L value set for Bermuda from which EQ-5D-5L Crosswalk values could be obtained. METHODS: Respondents in Bermuda were recruited locally. A team of Trinidad-based interviewers with prior EQ-5D-3L valuation experience conducted valuation interviews on-line using the EQ-VT protocol. Respondents completed composite time-trade off (cTTO) and discrete choice experiment (DCE) tasks. A hybrid model that included both the cTTO and DCE data was estimated. An EQ-5D-5L crosswalk value set was then created from the EQ-5D-3L index values. Coefficients in the resulting crosswalk model were compared with those of crosswalk and valuation studies from other countries. RESULTS: The valuation tasks were completed by a near-representative sample of 366 adult Bermuda citizens. Half of the respondents reported being in state 11111. The lowest EQ VAS and EQ-5D-3L index values were 20 and - 0.120 respectively. The hybrid model produced all logically consistent and statistically significant coefficients that in turn produced index values that were very similar to those obtained in a preliminary model (MAD of 0.027). DISCUSSION: The on-line EQ-VT valuation study was successfully conducted in Bermuda and the values therein can now be used for economic analysis in Bermuda. The Bermuda values differed considerably from those of the other countries against which they were compared. Challenges were encountered with recruitment for an on-line survey in a small population.