Optimization of Methodologies to Study Freeze/Thaw Processes in Drug Substance Bottles.

Biological drug substance (DS) is often frozen to enhance storage stability, prolong shelf life, and increase flexibility during manufacturing. However, the freezing and thawing (F/T) of bulk DS at the manufacturing scale can impact product quality as a result of various critical conditions, including cryo-concentration during freezing, which are influenced, among other things, by product-independent process parameters (e.g., container type, fill level, F/T equipment, and protocols). In this article, we report the optimization of two major methodologies to study product-independent process parameters in DS bottles at the manufacturing scale, namely the recording of temperature profiles and liquid sampling after thawing to quantify the concentration gradients in the solution. We report experimentally justified measuring positions for temperature recordings, especially for the selection of the last point to freeze position, and highlight the implementation of camera-assisted inspection to determine the last point to thaw and the actual thawing time. In particular, we provide, for the first time, a detailed description of the technical implementation of these two measuring set-ups. Based on the reported case studies, we recommend choosing relevant measuring positions as a result of initial equipment characterization, resulting in a resource-conscious study set-up.

Pulse Charge Suppressing Dendrite Growth at Low Temperature by Rapidly Replenishing Lithium Ion on Anode Surface.

Dendrite growth of lithium (Li) metal anodes is considered as one of the most tough issues for Li metal batteries with a theoretically high energy density. This is attributed to the rapid exhaustion of Li ions at the electrode/electrolyte interface, which is even worse at low temperatures with poor diffusion kinetics of Li ions. Here, pulse charge with intermittent rest time during battery charging is proposed to handle the dendrite growth issue of Li metal anodes at low temperatures. The depleted Li ions near the interfaces can be rapidly replenished during the rest time, thus effectively suppressing the dendrites growth. Further investigations indicate that the large dendrites can be suppressed at the Li ion nucleation stage. The equivalent lifespan considering the rest time is proposed. At -10oC, the lifespan of Li||Li batteries cycled under 3 mA cm-2 and 1 mAh cm-2 is increased from 24 h to equivalent 64 h. Li ||LiNi0.5Co0.2Mn0.3O2 batteries with 80% capacity retention can be stably operated from 39 cycles to 56 cycles. This design presents an efficient and convenient strategy to regulate the deposition behaviors of Li metal anodes with a dendrite-free morphology.

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages.

Antimony selenosulfide (Sb2(S,Se)3), featuring large absorption coefficient, excellent crystal structure stability, benign non-toxic characteristic, outstanding humidity and ultraviolet tolerability, has recently attracted enormous attention and research interest regarding its photoelectric conversion properties. However, the open-circuit voltage (Voc) for Sb2(S,Se)3-based photovoltaic devices is relatively low, especially for the device with a high power conversion efficiency (η). Herein, an innovative Se-elemental concentration gradient regulation strategy has been exploited to produce high-quality Sb2(S,Se)3 films on TiO2/CdS substrates through a thioacetamide(TA)-synergistic dual-sulfur source hydrothermal-processed method. The Se-elemental gradient distribution produces a favorable energy band structure, which suppresses the energy level barriers for hole transport and enhances the driving force for electron transport in Sb2(S,Se)3 film. This facilitates efficient charge transport/separation of photogenerated carriers and boosts significantly the Voc of Sb2(S,Se)3 photovoltaic devices. The champion TA-Sb2(S,Se)3 planar heterojunction (PHJ) solar cell displays an considerable η of 9.28 % accompanied by an exciting Voc rising to 0.70 V that is currently the highest among Sb2(S,Se)3-based solar cells with efficiencies exceeding 9.0 %. This research is anticipated to contribute to the preparation of high-quality Sb2(S,Se)3 thin film and the achievement of efficient inorganic Sb2(S,Se)3 PHJ photovoltaic device.

A versatile dilution-treatment-detection microfluidic chip platform for rapid In vitro lung cancer drug combination sensitivity evaluation.

Combination drug therapy represents an effective strategy for treating certain drug-resistant and intractable cancer cases. However, determining the optimal combination of drugs and dosages is challenging due to clonal diversity in patients' tumors and the lack of rapid drug sensitivity evaluation methods. Microfluidic technology offers promising solutions to this issue. In this study, we propose a versatile microfluidic chip platform capable of integrating all processes, including dilution, treatment, and detection, for in vitro drug sensitivity assays. This platform innovatively incorporates several modules, including automated discrete drug logarithmic concentration generation, on-chip cell perfusion culture, and parallel drug treatments of cancer cell models. Moreover, it is compatible with microplate readers or high-content imaging systems for swift detection and automated monitoring, simplifying on-chip drug evaluation. Proof of concept is demonstrated by assessing the in vitro potency of two drugs, cisplatin, and etoposide, against the lung adenocarcinoma A549 cell line, under both single-drug and combination treatment conditions. The findings reveal that, compared to conventional microplate approaches with static cultivation, this on-chip automated perfusion bioassays yield comparable IC50 values with lower variation and a 50 % reduction in drug preparation time. This versatile dilution-treatment-detection microfluidic platform offers a promising tool for rapid and precise drug assessments, facilitating in vitro drug sensitivity evaluation in personalized cancer chemotherapy.

Evaluation of Polymetallic Phosphide Cathodes for Sodium-Air Batteries by Distribution of Relaxation Time.

Sodium-oxygen batteries are emerging as a new energy storage system because of their high energy density and low cost. However, the cycling performance of the battery is not satisfying due to its insulating discharge product. Here, we synthesized metallic phosphides with gradient concentration (g-CoNiFe-P) and their uniform counterpart (CoNiFe-P) as cathode catalysts in a Na-O2 battery. Notably, the distribution of relaxation time (DRT) was utilized to identify the rate-determining step in a Na-O2 battery, evaluate the catalytic performance of the catalysts, and monitor the change of every single electrochemical process along the whole cycling process to study the degradation mechanism. The g-CoNiFe-P catalyst presented better initial capacity and cycling performances. The evolution of the kinetic processes resulting in battery degradation has been investigated by DRT analysis, which assists with characterizations. Our work demonstrates the application of DRT in battery diagnosis to evaluate the catalytic performance of catalysts and monitor the changes in different kinetic processes of new energy systems.

Atmospheric Pressure Enhanced Self-Sealing Rotation-SlipChip with Programmable Concentration Gradient Generation for Microbiological Applications.

In microbiological research, traditional methods for bacterial screening and antibiotic susceptibility testing are resource-intensive. Microfluidics offers an efficient alternative with rapid results and minimal sample consumption, but the demand for cost-effective, user-friendly platforms persists in communities and hospitals. Inspired by the Magdeburg hemispheres, the strategy adapts to local conditions, leveraging omnipresent atmospheric pressure for self-sealing of Rotation-SlipChip (RSC) equipped with a 3D circular Christmas tree-like microfluidic concentration gradient generator. This innovative approach provides an accessible and adaptable platform for microbiological research and testing in diverse settings. The RSC can avoid leakage concerns during multiple concentration gradient generation, chip-rotating, and final long-term incubation reaction (≥24 h). Furtherly, RSC subtypes adapted to different reactions can be fabricated in less than 15 min with cost less than $1, the result can be read through designated observational windows by naked-eye. Moreover, the RSC demonstrates its capability for evaluating bacterial biomarker activity, enabling the rapid assessment of ß-galactosidase concentration and enzyme activity within 30 min, and the limit of detection can be reduced by 10-fold. It also rapidly determines the minimum antibiotic inhibitory concentration and antibiotic combined medications results within 4 h. Overall, these low-cost and user-friendly RSC make them invaluable tools in determinations at previously impractical environment.

The pivotal role of phosphorus level gradient in regulating nitrogen cycle in wetland ecosystems.

Phosphorus (P) is one of key drivers in Earth's nitrogen (N) cycle, however, the global overview of the P-regulated microbial community structure and gene abundance carrying wetland N process remains to be investigated. The key environmental factors that influenced wetland N cycle were initially screened, verifying the central role P. More complex and stable community interaction can be established in rich (20 mg/kg < P ≤ 100 mg/kg) and surplus P groups (P > 100 mg/kg) compared to that in deficient P group (P ≤ 20 mg/kg), with enhanced participation of betaproteobacteria and actinobacteria (i.e., changed hub microorganisms). Accordingly, P-mediated variations in gene expression patterns can be expected. On the one hand, the gene responses to carbon (C), N, and P factors presented nearly synchronous variation, highlighting the potential C-N-P coupling cycle in wetland ecosystem. On the other hand, the gene sensitivity towards environmental factors was changed at different P levels. Overall, the P level gradient can influence N cycle in direct (i.e., influences on gene abundances) and indirect (i.e., influences on gene response to environmental factors) manners. These findings provide important insights for controlling the N cycle in wetland ecosystems, particularly in cases where P levels are limiting factors.

High temperature and nib acidification during cacao-controlled fermentation improve cadmium transfer from nibs to testa and the liquor's flavor.

Migration of nib Cd to the testa during fermentation can be achieved with high temperatures (> 45 °C) and low nib pH values (< 5.0) using spontaneous fermentation. However, this low pH can lead to low flavor quality. This study used three controlled temperature fermentation treatments on three cacao genotypes (CCN 51, ICS 95, and TCS 01) to test its effects on the nib pH, the migration of nib Cd to the testa, and the liquor flavor quality. All treatments were effective in reducing the total nib Cd concentration. Nevertheless, the treatment with the higher mean temperature (44.25 °C) and acidification (pH 4.66) reached the highest mean nib Cd reductions throughout fermentation, a 1.37 factor in TCS 01, promoting the development of fine-flavor cocoa sensorial notes. In unfermented beans, the Cd concentration of nibs was higher than that of the testa, and the Cd migration proceeded down the total concentration gradient. However, Cd migration was observed against the concentration gradient (testa Cd > nib Cd) from the fourth day. Cd migration could increase by extensive fermentation until the sixth day in high temperatures and probably by the adsorbent capacity of the testa. Genotype-by-treatment interactions were present for the nib Cd reduction, and a universal percentage of decrease of Cd for each genotype with fermentation cannot be expected. Selecting genotypes with highly adsorbent testa combined with controlled temperatures would help reduce the Cd concentration in the cacao raw material, improving its safety and quality.

Thermal-Rectified Gradient Porous Polymeric Film for Solar-Thermal Regulatory Cooling.

Solar-thermal regulation concerning thermal insulation and solar modulation is pivotal for cooling textiles and smart buildings. Nevertheless, a contradiction arises in balancing the demand to prevent external heat infiltration with the efficient dissipation of excess heat from enclosed spaces. Here, a concentration-gradient polymerization strategy is presented for fabricating a gradient porous polymeric film comprising interconnected polymeric microspheres. This method involves establishing an electric field-driven gradient distribution of charged crosslinkers in the precursor solution, followed by subsequent polymerization and freeze-drying processes. The resulting porous film exhibits a significant porosity gradient along its thickness, leading to exceptional unidirectional thermal insulation capabilities with a thermal rectification factor of 21%. The gradient porous film, with its thermal rectification properties, effectively reconciles the conflicting demands of diverse thermal conductivity for cooling unheated and spontaneously heated enclosed spaces. Consequently, the gradient porous film demonstrates remarkable enhancements in solar-thermal management, achieving temperature reductions of 3.0 and 4.1 °C for unheated and spontaneously heated enclosed spaces, respectively, compared to uniform porous films. The developed gradient-structured porous film thus holds promise for the development of thermal-rectified materials tailored to regulate solar-thermal conditions within enclosed environments.

Strategies to enhance the ability of nerve guidance conduits to promote directional nerve growth.

Severely damaged peripheral nerves will regenerate incompletely due to lack of directionality in their regeneration, leading to loss of nerve function. To address this problem, various nerve guidance conduits (NGCs) have been developed to provide guidance for nerve repair. However, their clinical application is still limited, mainly because its effect in promoting nerve repair is not as good as autologous nerve transplantation. Therefore, it is necessary to enhance the ability of NGCs to promote directional nerve growth. Strategies include preparing various directional structures on NGCs to provide contact guidance, and loading various substances on them to provide electrical stimulation or neurotrophic factor concentration gradient to provide directional physical or biological signals.

Deep learning-assisted concentration gradient generation for the study of 3D cell cultures in hydrogel beads of varying stiffness.

The study of dose-response relationships underpins analytical biosciences. Droplet microfluidics platforms can automate the generation of microreactors encapsulating varying concentrations of an assay component, providing datasets across a large chemical space in a single experiment. A classical method consists in varying the flow rate of multiple solutions co-flowing into a single microchannel (producing different volume fractions) before encapsulating the contents into water-in-oil droplets. This process can be automated through controlling the pumping elements but lacks the ability to adapt to unpredictable experimental scenarios, often requiring constant human supervision. In this paper, we introduce an image-based, closed-loop control system for assessing and adjusting volume fractions, thereby generating unsupervised, uniform concentration gradients. We trained a shallow convolutional neural network to assess the position of the laminar flow interface between two co-flowing fluids and used this model to adjust flow rates in real-time. We apply the method to generate alginate microbeads in which HEK293FT cells could grow in three dimensions. The stiffnesses ranged from 50 Pa to close to 1 kPa in Young modulus and were encoded with a fluorescent marker. We trained deep learning models based on the YOLOv4 object detector to efficiently detect both microbeads and multicellular spheroids from high-content screening images. This allowed us to map relationships between hydrogel stiffness and multicellular spheroid growth.

Concentration-Gradient Structural LiFe0.5Mn0.5PO4/C Prepared via Co-precipitation Reaction for Advanced Lithium-Ion Batteries.

The intrinsically low electronic conductivity and slow ion diffusion kinetics limit further development of olivine LiFexMn1-xPO4 cathode materials. In this paper, with the aim of improving the performance of such materials and alleviating the Jahn-Taller effect of Mn3+ ion, a bimetallic oxalate precursor with gradient distribution of elemental concentration followed with an efficient process is applied to synthesize LiFe0.5Mn0.5PO4 nanocomposite. The results shown that with certain structural modulation of the precursor, the discharge capacity of synthesized LiFe0.5Mn0.5PO4 increased from 149 mAh g-1 to 156 mAh g-1 at 0.1 C, the cycling capacity was also remarkably improved. the Fe0.5Mn0.5C2O4 ⋅ 2H2O-1 precursor with gradient distribution of elemental concentration effectively restricts the reaction between electrode material and electrolyte, thereby alleviates the dissolution of Mn3+ ion, reduces the decay of capacity and improves the stability of the material.

Assessing the Natural Source Zone Depletion of a Petroleum-Contaminated Clayey Soil Site in Southern China Combining Concentration Gradient Method and Metagenomics.

Natural source zone depletion (NSZD) is the main process of LNAPL (Light Non-Aqueous Phase Liquid) removal under natural conditions. The NSZD rates assessed ranged from 0.55 to 11.55 kg·m-2·a-1 (kilograms per square meter per year) in previous studies. However, most of these data were obtained from sandy sites, with few clayey sites. To gain knowledge of NSZD in clayey soil sites, the study assessed the NSZD of a petroleum hydrocarbon-contaminated clayey soil site in China, combining the concentration gradient method with metagenomic sequencing technology. The results show that the abundance of methane-producing key enzyme mcrA gene in the source zone was more abundant than in background areas, which suggests that there was methanogenesis, the key process of NSZD. The concentration gradients of oxygen and carbon dioxide existed only in shallow soil (<0.7 m), which suggests that there was a thin methane oxidation zone in the shallow zone. The calculated NSZD rates range from 0.23 to 1.15 kg·m-2·a-1, which fall within the moderate range compared to previous NSZD sites. This study expands the knowledge of NSZD in clayey soil and enriches the attenuation rate data for contaminated sites, which is of significant importance in managing petroleum contaminants.

All-Wood-Based Ionic Power Generator with Dual Functions for Alkaline Wastewater Reuse and Energy Harvesting.

Water-induced electricity harvesting has gained much significance for energy sustainability. Bio-based hydrovoltaic materials increase the attractiveness of this strategy. Although promising, it faces a challenge due to its reliance on fresh water and its inherently low power output. Herein, the energy from alkalinity-gradient power generation demonstrated the feasibility of reuse of alkaline wastewater to develop an all-wood-based water-induced electric generator (WEG) based on ion concentration gradients. The intermittent water droplets bring about uneven distribution of electrolyte and endow delignified wood with the difference of ion concentration along aligned cellulose nanochannels, thus supplying electrical power. The practice of using alkali reservoirs, including industrial wastewater, further contributes to electricity generation. The cubic WEG with a side length of 2 cm can produce an ultrahigh open-circuit voltage of about 1.1 V and a short-circuit current of up to 320 µA. A power output of 6.75 µW cm-2 is correspondingly realized. Series-connected WEGs can be used as an energy source for commercial electronics and self-powered systems. Our design provides a double value proposition, allowing for sustainable energy generation and wastewater reuse.

Ni/Mg Dual Concentration-Gradient Surface Modification to Enhance Structural Stability and Electrochemical Performance of Li-Rich Layered Oxides.

Li-rich layered oxides (LRLOs), with the advantages of high specific capacity and low cost, are considered as candidates for the next-generation cathode of lithium-ion batteries (LIBs). Unfortunately, sluggish kinetics and interfacial degradation lead to capacity loss and voltage decay of the material during cycling. To address these issues, we propose a Ni/Mg dual concentration-gradient modification strategy for LRLOs. From the center to the surface of the modified materials, the contents of Ni and Mg are gradually increased while the content of Mn is decreased. The high Ni content on the surface increases the proportion of cationic redox, elevating the operating voltage and accelerating reaction kinetics. Moreover, the doped Mg on the surface of the material acting as a stabilizing pillar suppresses the migration of transition metals, stabilizing the layered structure. Therefore, the material with the Ni/Mg dual concentration-gradients delivers a superior electrochemical performance, exhibiting a suppressed voltage decay of 2.8 mV per cycle during 200 cycles (1 C, 2-4.8 V) and an excellent rate capability of 94.84 mAh/g at 7C. This study demonstrates a synergic design to construct high-performance LRLO cathode materials for LIBs.

Advancements and Challenges in High-Capacity Ni-Rich Cathode Materials for Lithium-Ion Batteries.

Nowadays, lithium-ion batteries are undoubtedly known as the most promising rechargeable batteries. However, these batteries face some big challenges, like not having enough energy and not lasting long enough, that should be addressed. Ternary Ni-rich Li[NixCoyMnz]O2 and Li[NixCoyAlz]O2 cathode materials stand as the ideal candidate for a cathode active material to achieve high capacity and energy density, low manufacturing cost, and high operating voltage. However, capacity gain from Ni enrichment is nullified by the concurrent fast capacity fading because of issues such as gas evolution, microcracks propagation and pulverization, phase transition, electrolyte decomposition, cation mixing, and dissolution of transition metals at high operating voltage, which hinders their commercialization. In order to tackle these problems, researchers conducted many strategies, including elemental doping, surface coating, and particle engineering. This review paper mainly talks about origins of problems and their mechanisms leading to electrochemical performance deterioration for Ni-rich cathode materials and modification approaches to address the problems.

Optimizing electrochemical performance of Na0.67Ni0.17Co0.17Mn0.66O2 with P2 structure via preparing concentration-gradient particles for sodium-ion batteries.

P2-type layered oxides for rechargeable sodium-ion batteries have drawn a lot of attention because of their excellent electrochemical performance. However, these types of cathodes usually suffer from poor cyclic stability. To overcome this disadvantage, in this work, novel ball-shaped concentration-gradient oxide Na0.67Ni0.17Co0.17Mn0.66O2 with P2 structure modified by Mn-rich surface is successfully prepared using co-precipitation method. The concentration of Mn increased from the inner core to the surface, endowing the material with an excellent cyclic stability. The cathode exhibits enhanced electrochemical properties than that of the sample synthesized by solid-state method and concentration-constant material. It shows 143.2 mAh/g initial discharge capacity and retains 131 mAh/g between 2 V and 4.5 V after 100 rounds. The significant improvement in the electrochemical properties of the sample benefits from the unique concentration-gradient structure, and the Mn-rich surface that effectively stabilizes the basic P2 structure. The relatively higher Ni content in the core leads to a slight improvement in the discharge capacity of the sample. This strategy may provide new insights for preparing layered cathodes for sodium-ion batteries with high electrochemical performance.

Controlled-diffusion centrifugal microfluidic for rapid antibiotic susceptibility testing.

The abuse of antibiotics has become a global public safety issue, leading to the development of antimicrobial resistance (AMR). The development of antimicrobial susceptibility testing (AST) is crucial in reducing the growth of AMR. However, traditional AST methods are time-consuming (e.g., 24-72 h), labor-intensive, and costly. Here, we propose a controlled-diffusion centrifugal microfluidic platform (CCM) for rapid AST to obtain highly precise minimum inhibitory concentration (MIC) values. Antibiotic concentration gradients are generated by controlled moving and diffusing of antibiotic and buffer solution along the main microchannel within 3 min. The solution and bacterial suspension are then injected into the outermost reaction chamber by simple centrifugation. The CCM successfully determined the MIC for three commonly used antibiotics in clinical settings within 4-9 h. To further enhance practicality, reduce costs, and meet point-of-care testing demands, we have developed an integrated mobile detection platform for automated MIC value acquisition. The proposed CCM is a simple, low-cost, and portable method for rapid AST with broad clinical and in vitro applications.

An embedded obstacle type micromixer-concentration gradient generator based on capillary driven.

An embedded obstacle-type micromixer-concentration gradient generator based on capillary self-driven is proposed and studied. Herringbone structure (HS) for mixing and palisade-shape small channels at the outlet are designed in the device (named HS). Simulation and experimentation are done to study the liquid mixing efficiency in the small channels and concentration gradient at the outlet, and the experimental results agree with the simulation results. For three cases of liquid dripping (sequential, reverse, and delayed drippings), mixing analysis shows that the mixing efficiency increases along both mixing channel and palisade length, and is high in the middle small channel of the palisade-shape area and low on both sides. An obvious concentration gradient at the outlet can form compared with the device without the palisade-shape area. Finally, water pH value detection is done as one of the applications of HS. This study can provide guidance for the application of HS in biochemical detection, cell research, drug screening, etc. based on the capillary-driven effect.

One-Step Surface-to-Bulk Modification of High-Voltage and Long-Life LiCoO2 Cathode with Concentration Gradient Architecture.

Raising the charging cut-off voltage of layered oxide cathodes can improve their energy density. However, it inevitably introduces instabilities regarding both bulk structure and surface/interface. Herein, exploiting the unique characteristics of high-valence Nb5+ element, a synchronous surface-to-bulk-modified LiCoO2 featuring Li3 NbO4 surface coating layer, Nb-doped bulk, and the desired concentration gradient architecture through one-step calcination is achieved. Such a multifunctional structure facilitates the construction of high-quality cathode/electrolyte interface, enhances Li+ diffusion, and restrains lattice-O loss, Co migration, and associated layer-to-spinel phase distortion. Therefore, a stable operation of Nb-modified LiCoO2 half-cell is achieved at 4.6 V (90.9% capacity retention after 200 cycles). Long-life 250 Wh kg-1 and 4.7 V-class 550 Wh kg-1 pouch cells assembled with graphite and thin Li anodes are harvested (both beyond 87% after 1600 and 200 cycles). This multifunctional one-step modification strategy establishes a technological paradigm to pave the way for high-energy density and long-life lithium-ion cathode materials.