RESUMEN
Innately designed to induce physiological changes, pharmaceuticals are foreknowingly hazardous to the ecosystem. Advanced oxidation processes (AOPs) are recognized as a set of contemporary and highly efficient methods being used as a contrivance for the removal of pharmaceutical residues. Since reactive oxygen species (ROS) are formed in these processes to interact and contribute directly toward the oxidation of target contaminant(s), a profound insight regarding the mechanisms of ROS leading to the degradation of pharmaceuticals is fundamentally significant. The conceptualization of some specific reaction mechanisms allows the design of an effective and safe degradation process that can empirically reduce the environmental impact of the micropollutants. This review mainly deliberates the mechanistic reaction pathways for ROS-mediated degradation of pharmaceuticals often leading to complete mineralization, with a focus on acetaminophen as a drug waste model.
Asunto(s)
Acetaminofén , Especies Reactivas de Oxígeno , Acetaminofén/química , Especies Reactivas de Oxígeno/metabolismo , Contaminantes Químicos del Agua/química , Oxidación-Reducción , Preparaciones Farmacéuticas/metabolismoRESUMEN
BACKGROUND: Personalized medicine is a rapidly revolving field that offers new opportunities for tailoring disease treatment to individual patients. The main idea behind this approach is to carefully select safe and effective medications and treatment plant based on each patient's unique pharmacokinetic profile. Isoniazid is a first-line anti-tuberculosis drug that has interindividual variability in its metabolic processing, leading to significant differences in plasma concentrations among patients receiving equivalent doses. This variability necessitates the creation of individualized treatment regimens as part of personalized medicine to achieve more effective therapy. RESULTS: In this work, a deep eutectic solvent-based liquid-liquid microextraction approach for the separation and determination of isoniazid in human plasma by high-performance liquid chromatography with UV-Vis detection was developed for the first time. A new natural deep eutectic solvent based on thymol as a hydrogen bond donor and 4-methoxybenzaldehyde as a hydrogen bond acceptor was proposed as the extraction solvent. The developed microextraction procedure assumed two simultaneous processes during the mixing of the sample and extraction solvent: the derivatization of the polar analyte in the presence of 4-methoxybenzaldehyde (component of the natural deep eutectic solvent) with the formation of a hydrophobic Schiff base (1); mass transfer of the Schiff base from the sample phase to the extraction solvent phase (2). Under optimal conditions, the limits of detection and quantification were 20 and 60 µg L-1, respectively. The RSD value was <10 %, the extraction recovery was 95 %. SIGNIFICANCE: In this work, the possibility of isoniazid derivatization in the natural deep eutectic solvent phase with the formation of the Schiff base was presented for the first time. The approach provided the separation and preconcentration of polar isoniazid without the use of expensive derivatization agents and solid-phase extraction cartridges. The formation of the Schiff base was confirmed by mass spectrometry.
Asunto(s)
Disolventes Eutécticos Profundos , Isoniazida , Microextracción en Fase Líquida , Isoniazida/sangre , Isoniazida/química , Isoniazida/aislamiento & purificación , Humanos , Microextracción en Fase Líquida/métodos , Disolventes Eutécticos Profundos/química , Cromatografía Líquida de Alta Presión/métodos , Antituberculosos/sangre , Antituberculosos/aislamiento & purificación , Antituberculosos/químicaRESUMEN
A gentisic acid based-Deep Eutectic Solvent (MTPPBr/GA-DES) was synthesized by mixing one mole of methyl triphenylphosphonium bromide (MTPPBr) and one mole of gentisic acid (GA: 2,5-dihydroxy-benzoic acid) based on the eutectic point phase diagram. Then, it was characterized by FT-IR, NMR, densitometer, and TGA/DTA techniques and used as a potent and novel catalyst for the fast and green synthesis of: (i) Five new 2(a-e) and five known 2(f-j) benzo[6,7]chromeno[2,3-d]pyrimidines and (ii) One new (3a) and eleven known 3(b-l) pyrano[2,3-d]pyrimidines, in solvent-free conditions, short reaction times, and high yields. It is important to mention that for the synthesis of 2(a-j), there is only one reference which states that the reaction times are extremely long (720-2400 min), while these times are reduced to approximately 35-50 min in our proposed strategy, indicatinging that the rate of reactions will be 20-48 times faster, which is the clear and most obvious advantage of our approach.
RESUMEN
Wild animals, as a vital component of our natural world, serve a crucial role in preserving ecological equilibrium and biodiversity. By delving into the genetic constitution of wild animal populations, the evolutionary history, genetic diversity, and adaptation mechanisms could be explored, thereby informing conservation strategies and safeguarding the future of these species. In order to study the genetic information of wild animals, it is necessary to extract high purity and high concentration of wild animal genomic DNA. In this work, a hydrophobic magnetic deep eutectic solvent (HMDES) based vortexed extraction was developed for the extraction of genomic DNA from leopard cat (Prionailurus bengalensis), hairy-crowned deer (Elaphodus cephalophus) and muntjac (Muntiacus reevesi) muscle tissue, respectively. Extraction conditions like the pH value, extraction time, temperature and the amount of HMDES used were optimized by single-factor experiments. Under the optimized condition, genomic DNA could be selectively extracted from the three animal tissues. The limits of detection (LOD) and limits of quantification (LOQ) of the proposed method were 2.86 ng/µL and 8.66 ng/µL, respectively. Meanwhile, the relative standard deviation (RSD) of the method precision and repeatability were 1.64 % and 5.57 % at 20 ng/µL, showing the method has good precision and repeatability. After extraction, the DNA extracted into the HMDES droplets can be quickly recovered and the HMDES can be recycled and reused. The method proposed is a fast, environmental-friendly and high efficient extraction strategy for purification and enrichment of genomic DNA from leopard cat, hairy-crowned deer and muntjac tissues.
RESUMEN
A novel and facile surface molecularly imprinted polymer coated on magnetic chitosan (Fe3O4@CS@MIP) was fabricated for the selective recognition and enrichment of naringin (NRG). The Fe3O4@CS@MIP was prepared based on covalent-noncovalent synergistic imprinting strategies, utilizing 4-vinyl phenyl boric acid as covalent functional monomer, deep eutectic solvent (choline chloride/methacrylic acid [ChCl/MAA]) as non-covalent functional monomer and Fe3O4@CS nanoparticles as the magnetic support. The obtained Fe3O4@CS@MIP exhibited a uniform morphology, excellent crystallinity, outstanding magnetic properties, and high surface area. Owing to the double recognition abilities, the resultant polymer showed exceptional binding performance and rapid mass transfer in phosphate buffer (pH 7.0). The maximum binding amount of Fe3O4@CS@MIP was found to be 15.08 mg g-1, and the equilibrium adsorption could be achieved within 180 min. Moreover, they also exhibited stronger selectivity for NRG and satisfactory reusability, with only 11.0% loss after five adsorption-desorption cycles. Additionally, the Fe3O4@CS@MIP, serving as an adsorbent, presented practical application potential in the separation and enrichment of NRG from pummelo peel, with extraction efficiency in the range of 79.53% to 84.63%. This work provided a new strategy for improving the performance of MIP and contributed an attractive option for the extraction of NRG in complex samples.
RESUMEN
5-Hydroxymethylfurfural(HMF) is a versatile chemical synthesized from glucose dehydration catalyzed by metal chloride (MClx) in deep eutectic solvents (DESs). However, the low glucose concentration and high catalyst dosage hinder large-scale HMF production. Herein, we report an aqueous DES of tetraethylammonium bromide(TEAB)-glucose for converting concentrated glucose (40 wt%, relative to TEAB) using ultra-dilute SnCl4 (0.25 mol%), achieving a 62% yield of HMF. Ultra-dilute MClx-catalyzed selective conversion of glucose is feasible only when combining SnCl4 with Br-based DES, which is elucidated by density functional theory and molecular dynamic calculations. Using SnCl4 is essential due to its higher glucose isomerization activity than AlCl3 and CrCl3, which can be attributed to its low-barrier coordination with glucose and its barrier-free separation from fructose. Halide anions in DESs strongly interact with glucose, hindering the MClx-glucose coordination and thereby reducing MClx's activity for glucose isomerization. Consequently, Br-based DESs facilitate higher activity of MClx than Cl-based DESs, due to the weaker interaction between halide anion and glucose. In addition, we elucidated the side reactions including condensation, polymerization, and isomerization, and proposed a reaction network. Our findings clarify the differential activity of MClx and the impact of halide anions in DESs on MClx's activity.
RESUMEN
In this study, we propose a novel strategy utilizing deep eutectic solvents (DESs) as both the extraction solvent and dispersing liquid, with nanometer zinc oxide (ZnO) serving as the adsorbent. This method incorporates ultrasound-assisted matrix solid phase dispersion (UA-MSPD) for the extraction of six active components (salidroside, echinacoside, acteoside, specnuezhenide, nuezhenoside G13, and oleanolic acid) from Ligustri Lucidi Fructus samples. The extracts were then analyzed using high-performance liquid chromatography equipped with a diode array detector. The effects of various parameters such as dispersant dosage, DESs volume, grinding time, ultrasonication duration, and eluent volume on extraction recovery were investigated and optimized using a central composite design under response surface methodology. The optimized conditions yielded detection limits ranging from 0.003 to 0.01 mg/g and relative standard deviations of 8.7% or lower. Extraction recoveries varied between 93% and 98%. The method demonstrated excellent linearity for the analytes (R2 ≥ 0.9997). The simple, green, and efficient DESs/ZnO-UA-MSPD technique proved to be rapid, accurate, and reliable for extracting and analyzing the six active ingredients in Ligustri Lucidi Fructus samples.
Asunto(s)
Ligustrum , Extracción en Fase Sólida , Ondas Ultrasónicas , Óxido de Zinc , Extracción en Fase Sólida/métodos , Óxido de Zinc/química , Ligustrum/química , Disolventes Eutécticos Profundos/química , Cromatografía Líquida de Alta Presión , Frutas/química , Extractos Vegetales/química , Extractos Vegetales/análisis , Tamaño de la Partícula , Solventes/químicaRESUMEN
In this study, deep eutectic solvent (DES) prepared from choline chloride, lactic acid, and one of the four polyols (ethylene glycol, glycerol, xylitol, and sorbitol) were compared and assessed for their effectiveness in extracting chitin from lobster shells. Our results revealed that as the number of hydroxyl groups in polyols increased, the hydrogen bond network within the DESs became denser. However, this led to a corresponding increase in viscosity, which impacted the efficiency of chitin extraction. Among all prepared DESs, choline chloride-lactic acid/glycerol (CCLaGly) exhibited superior extractive ability, resulting in the extraction of pure chitin from lobster shells. The purity, crystallinity, and molecular weight of the extracted chitin using CCLaGly DES were comparable to those of chemically-isolated chitin, with purity reaching 94.76 ± 0.33 %, crystallinity at 78.78 %, and a molecular weight of 655 kDa. Additionally, the physicochemical properties of the DES-extracted chitins were characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. This study conducted a comparative analysis of polyol effects on chitin extraction from lobster shells, thereby opening a promising avenue for the utilization of various crustacean shells in sustainable biomaterial production.
RESUMEN
In chronic wound treatment, the debridement of devitalized tissue and the eradication of the biofilm must balance aggressiveness with care to protect regenerating tissues. In this study, urea, a potent chaotropic molecule, was modulated through the formation of a Natural Deep Eutectic Solvent (NADES) with betaine to develop a new debriding material (BU) suitable for application into injured dermal tissues. To evaluate BU's debriding capacity, along with its antibiofilm effect and biocompatibility, pre-clinical to clinical methods were employed. In vitro determinations using artificial and clinical slough samples indicate that BU has a high debriding capacity. Additionally, BU's de-structuring effects lead to a strong antibiofilm capability, demonstrated by a reduced bacterial load compared to the antiseptic PHMB-Betaine or medical honey, evaluated in artificial slough and ex vivo human skin. Furthermore, BU's efficacy was evaluated in a murine model of diabetic wound, demonstrating significant effects on debriding and antibiofilm capacity, similar to those observed in PHMB-Betaine and medical honey-treated animals. Finally, BU was clinically evaluated in leg ulcers, showing superiority in reduction of bacterial load and wound area compared to honey, with no adverse effects. Thus, BU represents a simple and non-biocidal option that could contributes to chronic wound care.
RESUMEN
This paper presents a novel dispersive liquid-liquid microextraction (DLLME) method that employs solidified hydrophobic deep eutectic solvent (DES) with hydrophilic DES acting as the dispersant. The aim is to enrich polychlorinated biphenyls (PCBs) from water samples for subsequent determination by gas chromatography-mass spectrometry. The effects of both the hydrophobic DES as the extractant and the hydrophilic DES as the dispersant were thoroughly investigated. Optimization of the key factors influencing extraction efficiency was performed, and the method was subsequently validated. Specifically, a hydrophobic DES called DES2, prepared by combining thymol and decanoic acid in a molar ratio of 3:2, was selected as the extraction solvent. Meanwhile, a hydrophilic DES named DES6, prepared from choline chloride and acetic acid in a molar ratio of 1:2, was chosen as a dispersant. Under the optimal extraction conditions, the developed method exhibited excellent linearity over the concentration range of 0.01-5.0 µg/L, low limits of detection ranging from 3.0 to 5.1 ng/L, relative standard deviations less than 4.1%, and enrichment factors between 182 and 204 for PCBs. Finally, the effectiveness of the developed method was successfully demonstrated through residue determination of PCBs in water samples.
RESUMEN
In the present work, deep eutectic solvents (DESs) were synthesized in a one-step process by heating the hydrogen bond acceptors (HBAs) tetrabutylammonium bromide and tetrabutylphosphonium bromide, along with two hydrogen bond donors (HBDs) ethanolamine and N-methyldiethanolamine, which were mixed in certain molar ratios. This mixture was then mixed with water to form a DES + water system. The densities of the prepared DES + water systems were successfully measured using the U-tube oscillation method under atmospheric pressure over a temperature range of 293.15-363.15 K. The CO2 trapping capacity of the DES + water systems was investigated using the isovolumetric saturation technique at pressures ranging from 0.1 MPa to 1 MPa and temperatures ranging from 303.15 K to 323.15 K. A semi-empirical model was employed to fit the experimental CO2 solubility data, and the deviations between the experimental and fitted values were calculated. At a temperature of 303.15 K and a pressure of 100 kPa, the CO2 solubilities in the DES + water systems of TBAB and MEA, with molar ratios of 1:8, 1:9, and 1:10, were measured to be 0.1430 g/g, 0.1479 g/g, and 0.1540 g/g, respectively. Finally, it was concluded that the DES + water systems had a superior CO2 capture capacity compared to the 30% aqueous monoethanolamine solution commonly used in industry, indicating the potential of DES + water systems for CO2 capture.
RESUMEN
Lignin, the second most abundant natural polymer, is a by-product of the biorefinery and pulp and paper industries. This study was undertaken to evaluate the properties and estimate the prospects of using lignin as a by-product of the pretreatment of common reed straw (Phragmites australis) with deep eutectic solvents (DESs) of various compositions: choline chloride/oxalic acid (ChCl/OA), choline chloride/lactic acid (ChCl/LA), and choline chloride/monoethanol amine (ChCl/EA). The lignin samples, hereinafter referred to as Lig-OA, Lig-LA, and Lig-EA, were obtained as by-products after optimizing the conditions of reed straw pretreatment with DESs in order to improve the efficiency of subsequent enzymatic hydrolysis. The lignin was studied using gel penetration chromatography, UV-vis, ATR-FTIR, and 1H and 13C NMR spectroscopy; its antioxidant activity was assessed, and the UV-shielding properties of lignin/polyvinyl alcohol composite films were estimated. The DES composition had a significant impact on the structure and properties of the extracted lignin. The lignin's ability to scavenge ABTS+⢠and DPPH⢠radicals, as well as the efficiency of UV radiation shielding, decreased as follows: Lig-OA > Lig-LA > Lig-EA. The PVA/Lig-OA and PVA/Lig-LA films with a lignin content of 4% of the weight of PVA block UV radiation in the UVA range by 96% and 87%, respectively, and completely block UV radiation in the UVB range.
Asunto(s)
Antioxidantes , Disolventes Eutécticos Profundos , Lignina , Poaceae , Rayos Ultravioleta , Lignina/química , Antioxidantes/química , Antioxidantes/farmacología , Disolventes Eutécticos Profundos/química , Poaceae/química , Tecnología Química Verde/métodos , Solventes/químicaRESUMEN
A novel biphasic system containing water-soluble deep eutectic solvent (DES) and cyclopentyl methyl ether (CPME) was developed to treat Eucalyptus for furfural production, extracting lignin and enhancing cellulose enzymatic hydrolysis. Herein effect of DES type, water content in DES, temperature and time on furfural yield in water-soluble DES/CPME pretreatment process was firstly evaluated. A maximum furfural yield of 80.6 % was attained in 10 min at 150 °C with choline chloride (ChCl)/citric acid monohydrate (CAM)/CPME system containing 30 wt% water and 2.5 wt% SnCl4·5H2O, which was higher than that obtained from ChCl/CAM/CPME system without water (55.5 %) and H2O/CPME system (49.7 %). These results demonstrated that the water-soluble DES/CPME system was a powerful method enhancing the furfural production. Under the optimal pretreatment conditions, the delignification and glucose yield were reached to 72.7 % and 94.3 %, respectively. The extracted lignin showed low molecular weight and ß-aryl-ether was obviously cleaved. Additionally, water-soluble DES/CPME pretreatment led to a significant removal of hemicelluloses (100.0 %) and lignin (72.7 %) and introduced morphological changes on cell walls, especially from the cell corner (CC) and secondary wall (SW) layers. Overall, this work proposed a practical one-step fractionation strategy for co-producing furfural, lignin and fermentable sugar, providing a way to biorefinery.
RESUMEN
Green deep eutectic solvents (DESs) are widely used to extract bioactive components from plant biomass; however, hydrophilic DES and bioactive component isolation methods have not been developed. In this study, we synthesized hydrophilic DES (CL-CA-DES) using citric acid and choline chloride. We combined this with environmentally friendly anion- and cation-exchange resin column chromatographic isolation methods. This approach extracted and isolated four polyphenolic compounds (catechins, epicatechins, procyanidin B1, and procyanidin B2) from raspberry root and efficiently recovered the hydrophilic DES. CL-CA-DES extracted significantly higher contents of catechin and procyanidin B2 from raspberry root compared to other solvents. It also extracted substantially higher contents of epicatechin compared to butyl alcohol, 70% ethanol, and water, but there was no significant difference when compared with acetone and ethyl acetate. Additionally, CL-CA-DES extracted significantly higher contents of procyanidin B1 compared to butyl alcohol, water, and ethyl acetate, with no significant difference when compared with 70% ethanol and acetone. The isolation efficiency of the bioactive components in the raspberry root extract by anion- and cation-exchange resin column chromatography was higher than that of the organic solvent extraction and precipitation generation methods, and the method was effective in recovering CL-CA-DES with a recovery rate higher than 60%. In conclusion, this study developed a new method for the efficient recovery of hydrophilic CL-CA-DES, which can be used for isolating polyphenolic compounds from raspberry root.
RESUMEN
A leading cause of global warming is the increase of carbon dioxide (CO2) emissions due to anthropogenic activities which prompts an urgent need for substantial reduction. Recently, CO2 absorption in deep eutectic solvents (DESs) has attracted scientific attention, because of their adaptability compared to traditional ionic liquids and aqueous amine solutions. This study employs the heating method to synthesize DESs using tetrapropylammonium bromide (TPAB) and formic acid (Fa) with molar ratios of TPAB-Fa (1:1) and TPAB-Fa (1:2). Absorption experiments by static method quantified CO2 solubility in the DESs under varied pressures and temperatures. TPAB-Fa (1:2) at 25.0 °C was the most efficient with the CO2 solubility of 0.218. Thermodynamic modeling was performed by employing the nonrandom two liquids activity coefficient model and the Peng-Robinson equation of state for the liquid and gas phases, respectively. The Henry's law constant was determined from experimental data. CO2 physical absorption was confirmed via nuclear magnetic resonance (NMR) and Fourier-transform infrared (FT-IR) analyses. TPAB-Fa (1:2), as the superior DES, exhibited regeneration efficiency of 99% after five absorption/desorption cycles.
RESUMEN
In this study, a convenient and effective method for determination of perfluoroalkyl substances (PFASs) in infant formula was developed based on a novel dispersive solid-phase extraction using deep eutectic solvent-functionalized amorphous UiO-66 (DES/aUiO-66) as sorbent. The synthesis of materials could be achieved without the use of complex and environmentally unfriendly procedures. Parameters were systematically investigated to establish a simple, fast, and efficient green pretreatment method. The method demonstrated high sensitivity, good precision, a detection limit of 0.330-0.529 ng·kg-1, and low matrix effects (< 12.8%). The mechanism for this material was elucidated by ab initio molecular dynamics (AIMD) simulations and quantum chemistry calculations. The presence of massive pore structures and collectively synergistic binding sites facilitated affinity adsorption toward PFASs. Finally, this method was applied to the monitoring of PFASs in 10 actual milk powder samples. This groundbreaking approach opens new possibilities for the advancement of analytical techniques and food safety monitoring.
RESUMEN
Gel electrolytes have attracted extensive attention in flexible batteries. However, the traditional hydrogel electrolyte is not enough to solve the fundamental problems of zinc anodes, such as dendrite growth, side reactions, and freezing failure at temperatures below zero, which seriously restricts the development of zinc-ion batteries. As a flexible energy storage device, the zinc-ion battery inevitably undergoes multiple stretches, bends, folds, or twists in daily use. Here, a self-healing and stretchable eutectogel, designated as deep eutectic solvent-acrylamide eutectic gel (DA-ETG), was developed as a solid-state electrolyte for zinc-ion batteries. This gel was prepared by immobilizing a high-concentration ZnCl2 deep eutectic solvent (DES) into a polyacrylamide matrix through in situ polymerization under ultraviolet light. The eutectogel electrolyte showed exceptional mechanical properties with a maximum fracture strength of 0.6 MPa and a high ionic conductivity of 6.4 × 10-4 S cm-1. The in situ polymerization of the DA-ETG electrolyte in the assembly of a full solid-state zinc-ion battery increased the electrode-electrolyte interface area contact, reduced the ion transport distance between the electrode and electrolyte, minimized the internal resistance, and enhanced the battery's long-term cycling stability. Using the DA-ETG electrolyte, a remarkably high capacity of 580 mAh g-1 at 0.1 A g-1 was achieved by the zinc-ion battery, and a considerable capacity of 234 mAh g-1 was maintained even at 5 A g-1, showing exceptional rate performance. After 2000 cycles at 2 A g-1, the cell with the eutectogel retained a capacity of 85% with a cycling efficiency close to 98%, which demonstrated excellent cycling stability. The self-healing function enabled the prepared soft battery to be reused multiple times, with full contact between the electrode and electrolyte interface, and without device failures.
RESUMEN
MTPPBr/THFTCA-DES was prepared as a new deep eutectic solvent (DES) from a mixture (molar ratio 7:3) of methyltriphenyl-phosphonium bromide (MTPPBr) and tetrahydrofuran-2,3,4,5-tetra-carboxylic acid (THFTCA), and characterized with various spectroscopic techniques, densitometer, and eutectic point. Then, it was used as a new and powerful catalyst for the synthesis of two sets of biologically important compounds, namely the Henna-based benzopyranophenazines and benzoxan-thenetriones. Solvent-free conditions, short reaction time, high efficiency, and easy recycling and separation of the DES catalyst are among the most important features of the presented method. Also, there is a nice consistency between the proposed structure of the DES compound, the integration values of the 1H NMR peaks, and the ratio of MTPPBr to THFTCA obtained from the eutectic point phase diagram. In addition, the reduction of peak splitting patterns in DES compared to the two primary materials can be good evidence of the formation of hydrogen bonds between the two components.
RESUMEN
Proteins are adjustable units from which biomaterials with designed properties can be developed. However, non-native folded states with controlled topologies are hardly accessible in aqueous environments, limiting their prospects as building blocks. Here, we demonstrate the ability of a series of anhydrous deep eutectic solvents (DESs) to precisely control the conformational landscape of proteins. We reveal that systematic variations in the chemical composition of binary and ternary DESs dictate the stabilization of a wide range of conformations, that is, compact globular folds, intermediate folding states, or unfolded chains, as well as controlling their collective behavior. Besides, different conformational states can be visited by simply adjusting the composition of ternary DESs, allowing for the refolding of unfolded states and vice versa. Notably, we show that these intermediates can trigger the formation of supramolecular gels, also known as eutectogels, where their mechanical properties correlate to the folding state of the protein. Given the inherent vulnerability of proteins outside the native fold in aqueous environments, our findings highlight DESs as tailorable solvents capable of stabilizing various non-native conformations on demand through solvent design.
Asunto(s)
Geles , Pliegue de Proteína , Proteínas , Solventes , Solventes/química , Proteínas/química , Geles/química , Conformación ProteicaRESUMEN
Microalgal biomass is gaining increasing attention to produce high-value co-products. This study proposes integrating Chlorella microalgal biomass into a zero-waste biorefining system, aiming to produce biodiesel and biofertilizer. It investigates optimal conditions for ultrasound-assisted deep eutectic solvent (DES) pretreatment and lipid recovery to enhance the extraction of lipids. Optimal DES pretreatment was identified as a 1.6:1 acetic acid-to-choline chloride molar ratio, 0.36 g biomass loading, and 2.50 min of pretreatment. Lipid recovery succeeded with a 10-minute extraction time and a 1:3 methanol-to-butanol volume ratio. These conditions yielded biodiesel-quality lipids at 139.52 mg/g microalgal biomass with superior fuel characteristics. The de-oiled microalgal biomass residue exhibited promise as a lettuce biofertilizer, enhancing photosynthetic pigments but potentially reducing yields by 40 %. The study also notes changes in rhizosphere microbial communities, indicating both stimulatory and inhibitory effects on beneficial microbes. This study has the potential to enhance sustainability in energy, agriculture, and the environment.