[Assessment of the condition of organs and tissues of the oral cavity in people with dentition defects against the background of metabolic syndrome]. / Otsenka sostoyaniya organov i tkanei rta u lits s defektami zubnykh ryadov na fone metabolicheskogo sindroma.

OBJECTIVE: The aim of the study is comparative analysis of the condition of oral organs and tissues in people with metabolic syndrome (MS) of varying severity before orthopedic dental rehabilitation based on dental implants. MATERIAL AND METHODS: 255 patients (151 women and 104 men) aged from 35 to 65 years were examined. 3 groups were formed: 2 study groups and a comparison group. Groups 1 and 2 included individuals with excess body weight and MS. The control group consisted of 88 people without MS. An index assessment of the condition of the periodontium and tissue structures of the alveolar bone (according to cone-beam computed tomography), microcirculation in the gingival mucosa was carried out using laser Doppler flowmetry. RESULTS: The analysis of the periodontal condition indicators showed that in all groups of patients with MS, periodontal pathology occurred, the value of which was significantly higher than in patients of the control group (p <0.05). The analysis of bone tissue according to CBCT data showed that the most favorable conditions (type 1 and type 2 of bone according to Misch) for dental implantation are found in people without MS, respectively 3.5% and 35.1% of cases. The intensity of blood flow (σ) was 21.2% lower in group 1 and 48% in group 2, compared with the control group. Vasomotor activity (Kv) was 13.2% lower in the first group and 35% lower in the second group. A decrease in amplitudes in the area of all rhythms in the LDF gram was found: low-frequency - by 15.6%, high-frequency - by 16.9%, pulse - by 3.6%. CONCLUSION: Changes occurring in the organs and tissues of the mouth against the background of MS of varying severity lead to a decrease in tissue perfusion with blood and blood flow activity, a local decrease in bone density, and as a result, pathological changes in periodontal tissues. Before performing dental rehabilitation, it is necessary to take into account all the risks of possible complications caused by the general condition of organs and systems of people with MS.

[Teeth autotransplantation as an alternative to dental implantation]. / Autotransplantatsiya zuba kak al'ternativa dental'noi implantatsii.

The stages of preoperative planning and surgical treatment of compromised teeth by the method of autotransplantation of a tooth are presented on the example of two clinical cases. The autotransplantation method can be considered an alternative to dental implantation when strictly adhering to the surgical protocol and careful selection of patients.

A study on the morphology of iliac crest based on the objectives of jaw bone defect reconstruction.

OBJECTIVES: to understand the morphological characteristics of iliac crest and provide advice and assistance for jaw bone reconstruction with iliac bone flap by evaluating the thickness and curvature of iliac crest. MATERIALS AND METHODS: 100 patients who had taken Spiral CT of the Abdominal region before surgeries between 2020 and 2022 were included in this study. 3D reconstruction images of the iliac bones were created. 5 vertical planes perpendicular to the iliac crest were made every 2 cm along the centerline of the iliac crest (VP2 ~ VP10). On these vertical planes, 4 perpendicular lines were made every 1 cm along the long axis of the iliac crest (D1 ~ D4). The thicknesses at these sites, horizontal angle (HA) of iliac crest and the distance between inflection point and the central point of anterior superior iliac spine (DIA) were measured. RESULTS: The thickness of iliac bone decreased significantly from D1 ~ D4 on VP6 ~ VP10 and from VP2 ~ VP10 on D3 and D4 level (P<0.05). HA of iliac crests was 149.13 ± 6.92°, and DIA was 7.36 ± 1.01 cm. Iliac bone thickness, HA and DIA had very weak or weak correlation with patient's age, height and weight. CONCLUSIONS: The average thicknesses of iliac crest were decreased approximately from front to back, from top to bottom. The thickness and curvature of the iliac crest were difficult to predict by age, height and weight. CLINICAL RELEVANCE: Virtual surgical planning is recommended before jaw bone reconstruction surgery with iliac bone flap, and iliac crest process towards alveolar process might be a better choice.

Association of Connective Tissue Grafts in Immediate Implants: Systematic Review and Meta-Analysis.

BACKGROUND: The increase in soft tissue (ST) around implants can benefit peri-implant health and aesthetic results. The objective was to compare the gingival and esthetic health benefits of immediate implant placement (IIP) with simultaneous or delayed connective tissue graft (CTG) compared to IIP without CTG. METHODS: A systematic review was carried out by two reviewers in Medline-Pubmed, Scopus, and Cochrane. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) were considered. Randomized Clinical Trials (RCTs) that were published between April 2017 and February 2024 were used. Studies that analyzed the performance of a simultaneous or deferred CTG after the placement of an implant in the aesthetic zone, with or without immediate provisionalization, without previous regeneration, with a follow-up of 6 months, and that were performed in humans were included. RESULTS: Quantitative analysis was performed using data provided by the RCTs. The five RCTs that were selected analyzed a total "n" of 245 subjects who met the inclusion criteria and focused on the subject of the study. In the quantitative analysis, four RCTs were included. The studies evaluated buccal gingiva levels when placing the IIP with and without CTG, obtaining a mean buccal gingiva level difference of 0.09 mm (95% CI: -0.54 to 0.72, p = 0.05), statistically not significant, but with a favorable trend. CONCLUSIONS: The use of CTG associated with the II can maintain the gum level but not increase the volume. CTG is favorable for achieving successful esthetic results when immediate placement of an implant with a provisional prosthesis is planned.

Survival Rates of Short Dental Implants (≤6 mm) Used as an Alternative to Longer (>6 mm) Implants for the Rehabilitation of Posterior Partial Edentulism: A Systematic Review of RCTs.

Short dental implants have been proposed as an alternative treatment option to bone regeneration procedures for the rehabilitation of resorbed alveolar ridges. The aim of this paper was to systematically review randomized controlled trials (RCTs) comparing short implants (≤6 mm) and longer implants (>6 mm) in atrophic alveolar ridges in terms of implant survival rates, peri-implant marginal bone loss (MBL), prevalence of peri-implantitis and technical complications. A thorough electronic search was performed until September 2023. RCTs with follow-up of at least 1-year post-loading comparing short implants with rough surfaces to longer implants in the posterior jaws of systemically and periodontally healthy, partially edentulous adults were considered. Studies with incomplete information on the number of patients, follow-up or definition of "short implants" were excluded. The revised Cochrane risk-of-bias tool for randomized trials was used for Risk of bias assessment. Fixed-effects meta-analysis of the selected studies was applied to compare the outcome variables. Random-effect meta-analysis was performed, on the basis of within-study comparisons. In total, 16 articles were selected for meta-analysis and incorporated 408 short implants and 475 longer implants inserted in 317 and 388 patients, respectively. The survival rates of longer implants in pristine or augmented bone were significantly increased compared to short implants (95%CI: 2-5%, p < 0.001). Standard-length implants displayed increased, although non-statistically significant MBL (95%CI: -0.17-0.04, p > 0.05), and prevalence of peri-implantitis (95%CI: 0-5%, p > 0.05). No statistically significant differences were observed between short and long implants in terms of technical complications (implant-level 95%CI: -4-6%, p > 0.05). Short implants represent a promising alternative treatment option for the rehabilitation of posterior jaws to avoid additional bone augmentation procedures. Nonetheless, they should be selected cautiously due to a potentially limited survival rate compared to longer implants. A major limitation of this study is the variability in the included studies regarding sample size, patient profile, type of bone, loading protocol, definition of peri-implantitis, among others. This study received no external funding. The study protocol was registered in PROSPERO (CRD42023485514).

Short (≤6 mm) compared with ≥10-mm dental implants in different clinical scenarios: A systematic review of randomized clinical trials with meta-analysis, trial sequential analysis and quality of evidence grading.

AIM: To systematically identify, synthesize and critically summarize the available scientific evidence from randomized controlled trials (RCTs) regarding whether short (≤6 mm) perform as well as long (≥10 mm) implants regarding implant survival, marginal bone loss, and biologic and prosthetic complications in different clinical scenarios. MATERIALS AND METHODS: Cochrane Collaboration's risk of bias tool and the GRADE approach were applied. Results were synthesized using random-effects meta-analyses assessed by trial sequential analyses. RESULTS: Forty reports on 19 RCTs comprising 2214 (1097 short; 1117 long) implants were included. Moderate/high certainty/quality evidence demonstrated similar 5-year survival rates for ≤6-mm and ≥10-mm implants in non-augmented bone and full-mouth rehabilitation in either jaw, and for 6-mm implants in the maxilla instead of sinus lift. Nevertheless, the evidence for 5-year survival rates remains inconclusive or insufficient for the remaining combinations of implant lengths and clinical scenarios. They include 4-mm and 5-mm implants as alternatives to sinus lift as well as placing all implant lengths ≤6 mm instead of vertical ridge augmentation with long implants. Marginal bone level and short- and long-term biologic or prosthetic complications were similar. CONCLUSIONS: Based on moderate/high certainty/quality evidence from 5-year RCTs, implants ≤6 mm may be viable alternatives to ≥10-mm implants in either jaw in native bone and full-arch rehabilitation, and 6-mm implants may be used as an alternative to sinus lift. TRIAL REGISTRATION: PROSPERO ID: CRD42021254365.

Retrospective study of the deep circumflex iliac artery flap and the vascularized fibula free flap for maxillary defect repair.

OBJECTIVES: The deep circumflex iliac artery flap (DCIA) and vascularized fibular free flap (FFF) are mainstay flaps for maxillary defect reconstruction. This study compared the functional outcomes and success rates of these flaps to provide midface reconstruction strategies. MATERIALS AND METHODS: Maxillary defects reconstructed with DCIA or FFF at the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology between May 2016 and May 2023 were retrospectively analyzed. The length, width, and height of the grafted bone segments; intermaxillary distance; buttress reconstruction rate (BRR); dental arch reconstruction rate (DAR); success rate; and dental implantation rate were compared. RESULTS: The DCIA and FFF groups had 33 and 27 patients, respectively. Success rate in the DCIA group was 93.94 % and 100 % in the FFF group. The DCIA length was less than that of FFF; however, the width and height were significantly larger. 87.10 % of cases in the DCIA group were classified as Brown class b and c, 51.85 % of cases in the FFF group were classified as Brown class d. The average BRR in the DCIA group was 69.89 % ± 16.05 %, which was significantly higher than that in the FFF group. A total of 38.7 % and 11.1 % patients in the DCIA and FFF groups, respectively, had completed implantation. CONCLUSION: DCIA has a greater width and height, and is more suitable for repairing Brown class b and c defects, providing sufficient bone for implantation, while the FFF is longer and more suitable for Brown class d defect reconstruction.

The influence of immediate intraoperative loading with a splinting component on supporting tissues during a one-stage implant.

OBJECTIVE: Aim: To study the specifics of the impact of immediate intraoperative loading with a splinting component on supporting tissues during a one-stage implantation protocol. PATIENTS AND METHODS: Materials and Methods: In the course of the study, orthopedic treatment was carried out for 55 patients aged 29 to 60 years. The following were performed: cone-beam computed tomography, software planning and intraoral scanning with an optical scanner, one-stage implantation protocol, assessment of implant stability with the Osstell ISQ device, microcirculation study in the peri-implant area using laser Doppler flowmetry (LDF). RESULTS: Results: It was established that around loaded implants there is an increase in blood flow and vasomotor activity of the microcirculatory channel of the supporting tissues, an increase in the volume of bone tissue and an increase in torque, which is the optimal forecast for the acceleration of the pace of osseointegration. CONCLUSION: Conclusions: The use of a splinting component during immediate intraoperative functional masticatory load accelerates the dynamics of bone tissue remodeling processes around the implant, which is an optimal prediction of osseointegration rates in various dental implantation protocols and is consistent with high values of the implant stability coefficient.

[Reparative potential of bone tissue and associated influencing factors]. / Reparativnyi potentsial kostnoi tkani i vliyayushchie na nego faktory.

OBJECTIVE: The aim of the sthudy. To study the influence of general and local factors on the regenerative potential of bone tissue to optimize augmentation mechanisms in the treatment of jaw atrophy. MATERIALS AND METHODS: The influence of general and local factors on the regenerative potential of the bone during the augmentation operation of the alveolar process (part) of the jaw in 68 patients was studied. The survival rate of dental implants and the incidence of complications after completion of dental rehabilitation in the long-term follow-up period (more than 5 years) were evaluated. 18 indicators were studied, which were evaluated by qualitative and quantitative methods. The study of the effect of indicators on regeneration was carried out using an accurate Fischer test for conjugacy tables. The assessment of the strength of the influence was calculated as the ratio of the chances of developing an unfavorable outcome of bone grafting and dental implantation. RESULTS: He highest chances of developing adverse outcomes were found in smoking patients with diabetes mellitus, high body mass index, low survival of bone walls, severe bone atrophy (5.6 and higher class according to Cawood & Howell), three-dimensional bone defect, in the absence of 3 or more bone walls, the presence of subcompensated and decompensated psychological state the patient. In the course of histological examination, the influence of these factors on the mechanisms of reparative osteogenesis morphologically manifested a lower degree of progress of regenerative processes and a lower degree of maturity of bone tissue. CONCLUSION: To reduce the chances of developing an unfavorable outcome, in the presence of negative general and local factors, it is not advisable to use dental implantation simultaneously with bone augmentation procedures. In order to reduce the pathophysiological impact of negative factors during sinus lifting, increase the proportion of autosteal material for potentiating the metabolic activity of bone tissue, as well as prescribe antioxidant, antihypoxant and membrane stabilizing therapy before surgery and in the early postoperative period.

Staged Approach Involving Orthodontic Implant Site Development with Labial Root Torque and Guided Bone Regeneration; 3-Year Follow-up Case Report.

Restoring periodontally compromised teeth in aesthetic zones through dental implant rehabilitation poses significant challenges due to the loss of supporting tissues. This case report describes a staged treatment strategy designed for a 48-year-old woman with advanced chronic periodontitis of the aesthetic zone. This approach combined various advanced techniques, including periodontal regeneration, orthodontic implant site development with labial root torque, guided bone regeneration, and soft tissue augmentation. The innovative orthodontic implant site development with labial root torque technique was employed to harness healthy palatal periodontal ligament cells by strategically applying labial root torque in the horizontal labial-palatal direction. This technique uses healthy palatal periodontal ligament cells, which benefits overall periodontal health. The procedure involved gradually shifting hopeless teeth at a rate of 2 mm per month using nickel-titanium wires, thereby maintaining overcorrection for two months before extraction. Following successful orthodontic implant site development with labial root torque, the next phase involved guided bone regeneration using a honeycomb-structured titanium membrane. This set the stage for implant placement six months later, ensuring a stable foundation for subsequent prosthetic intervention. Soft tissue augmentation was then meticulously performed using an artificial collagen dermis infused with fibroblast growth factor-2, contributing to the overall aesthetic outcome. Final prosthesis integration revealed a harmonious blend with the adjacent teeth and gums, underscoring the success of this multidisciplinary approach. This case report provides valuable insights into severe periodontitis in the aesthetic field. Our findings highlight the importance of continuously researching and improving procedures for optimal patient care.

Marginal bone loss in ball versus locator attachments in implant-retained overdentures: systematic review and meta-analysis.

OBJECTIVES: This systematic review compares the impact of ball and locator attachments on marginal bone loss in implant-retained overdentures in completely edentulous patients. METHOD AND MATERIALS: Following PRISMA guidelines, health science librarians completed literature searches from inception to 17 March 2023 in seven databases. There were 15,686 items exported to EndNote from Embase.com, CINAHL (EBSCO), Cochrane Library, Ovid MEDLINE-ALL, PubMed, Scopus, and Web of Science. Hand-searching added four more articles. After deduplication, 6,756 items were screened for eligibility. Twenty-nine studies were assessed by full text, of which ten studies, involving 424 subjects, were included in the review. Risk of bias assessment was conducted using the Cochrane risk-of-bias tool and the Newcastle-Ottawa scale. A meta-analysis was performed to synthesize and analyze the collective data from the selected studies. RESULTS: The included studies used diverse methodologies, implant systems, and loading protocols. Most studies reported no significant difference in marginal bone loss between ball and locator attachments. The meta-analysis revealed high heterogeneity. CONCLUSION: The results of this systematic review suggest that ball and locator attachments exhibit similar performance in terms of marginal bone loss in implant-retained overdentures. However, the limited number, risk of bias, and heterogeneity of studies highlight the need for standardized research designs and larger sample sizes in future investigations to draw more definitive conclusions.

Effect of cement type on vertical marginal discrepancy and residual excess cement in screwmentable and cementable implant-supported monolithic zirconia crowns.

The purpose of this study was to investigate the vertical marginal discrepancy (VMD) and residual excess cement (REC) of cementable and screwmentable monolithic zirconia crowns cemented with different types of cement. Abutments were attached to 40 implant analogues. Crowns were created using computer-aided design/computer-aided manufacturing technology from monolithic zirconia blocks, either with or without a screw access hole (SAC). Crowns created both ways were split into two groups and cemented with resin and zinc polycarboxylate cement under a 5-kg weight. VMD and REC values were evaluated using an X20 zoom stereomicroscope. Data were analysed using two-way ANOVA and the Bonferroni test. According to the two-way ANOVA results, REC measurements differed significantly in the crown design and cement groups. However, whilst VMD values were significantly different in both crown design groups, there was no significant difference in the cement groups. According to the Bonferroni test results, the highest REC (157.241 ± 44.29 µm) and VMD (68.052 ± 16.19 µm) values were found in the crowns without SAC and cemented with zinc polycarboxylate. Screwmentable crowns are more effective than cementable crowns in reducing REC and VMD. Whilst polycarboxylate cement reduces VMD in screwmentable crowns, resin cement is more suitable for cementable crowns.

Soft and hard tissue evaluation of guided socket shield implant cases.

BACKGROUND: The socket-shield (SS) technique results in long-term functional osseo- and dento-integration, preserving the dimensional stability of hard and soft tissues over time. This study aimed to describe the successful implementation of a surgical technique to facilitate "SS" cases. METHODS: The cases included males and females aged 32-81 years consecutively treated between 2020 and 2023 (longest follow-up, 3.5 years). For each case, pre- and post-operative cone-beam computed tomography (Digital Imaging and Communications in Medicine files) and intraoral optical scans (IOS; STL files) were performed. Digital immediate implant placement and simultaneous tooth extraction and SS production were planned using an implant planning software. Implants were planned considering sagittal-ridge and tooth-root angular-configuration. Surgical guides were used to perform the digitally-supported SS technique. All cases were planned and surgically performed by one operator (Pedro M. Trejo). Preoperative digital IOS-models were superimposed to post-operative models to assess soft-tissue changes. Pre and post sagittal views were used to assess the radiographic buccal-plate thickness at various healing times. An investigator not involved with case planning or treatment performed measurements. RESULTS: Results reflected soft-tissue stability with minimal mean thickness change at 0-, 1-, 2-, and 3-mm measurement levels of 0.03, -0.2, 0.14, -0.07, and 0.04 mm, respectively, with a mean gingival-margin change of 0.04 mm. The free gingival-margin change ranged from a 0.58-mm gain in height to a -0.57-mm loss. The mean radiographic buccal-plate thickness post-operatively was 2.04 mm (range, 0.7-2.9 mm). CONCLUSION: The digitally-supported guided SS technique enables predictable immediate implant-placement positions and stable buccal peri-implant soft and hard tissues over time. KEY POINTS: Why are these cases new information? The uniqueness of the surgical technique described herein is that it results in favorable positions of immediate, socket-shielded (SSed), implant placements, with soft- and hard-tissue stability as the byproduct. What are the keys to successful management of these cases? Digitally, plan for the best possible implant position within the alveolar housing to satisfy prosthetic requirements, and then adjust this position to accommodate the socket shield dimensions. Digitally, provide a space/gap between the future dentinal shield and the implant. Clinically, allow for time to carve the final position and dimensions of the shield. Plan ahead the extent of the apical third of the SS, and the removal of the apex, if dealing with a long root. What are the primary limitations to success in these cases? Inadequate use of digital technology; case-sensitive technique requires proper execution of each digital and technical clinical step.

Fabrication of a mandibular implant-retained overdenture using an existing subperiosteal implant: A clinical report.

A 64-year-old edentulous woman with a mandibular fracture received a subperiosteal implant for fracture fixation and dental rehabilitation. However, the ball abutments were submerged by the soft tissue because they were too short. Therefore, we designed a connector to lengthen the attachment and achieve adequate stability and retention for the overdenture.

Periodontists and oral surgeons' peri-implantitis-related education, knowledge, attitudes, and professional behavior: A national survey.

OBJECTIVES: Each year, approximately 5 million dental implants are placed in the United States and one out of three patients is likely to experience peri-implantitis (PI). The objectives were to compare the PI-related education, knowledge, attitudes, and professional behavior of periodontists and oral maxillofacial surgeons (OMS), and to explore relationships between these constructs of interest. METHODS: A total of 389 periodontists and 161 OMS responded to a web-based survey. Descriptive and inferential statistical analyses (independent sample t-tests, chi-square tests, and correlational analyses) were conducted. RESULTS: On average, periodontists reported a higher percentage of time spent in residency on implant surgery (21.02% vs. 7.27%; p < 0.001), better education about PI (5-point scale with 1 = not at all well: means: 2.86 vs. 2.59; p < 0.001), and better knowledge of risk factors (4.07 vs. 3.86; p < 0.001) than OMS. Periodontists argued that oral hygiene-related treatment (4.45 vs. 4.22; p = 0.001) and regeneration-focused treatments such as guided tissue regeneration (3.62 vs. 3.20; p < 0.001) contributed more to successfully treating PI and used these treatments more in their practices (4.86 vs. 4.56; p < 0.001/3.06 vs. 2.68; p < 0.001) than OMS. They also considered PI as a more serious problem than OMS (4.55 vs. 3.80; p < 0.001). The better the respondents' PI-related knowledge was, the more they considered PI as a serious problem (r = 0.19; p < 0.001). The more cases they treated per month, the more they considered PI as a serious problem (r = 0.19; p < 0.001). CONCLUSIONS: The results of the present study highlight the lack of standardization in the specialty training of periodontists and OMS. Best practice guidelines for the diagnosis and treatment of PI are needed to optimize graduate education about this important topic.

Effectiveness of Autologous Platelet Concentrates in the Sinus Lift Surgery: Findings from Systematic Reviews and Meta-Analyses.

Maxillary sinus augmentation is one of the most predictable procedures for the rehabilitation of the posterior maxilla. The current overview aimed to summarize the findings provided by systematic reviews (SRs) and meta-analyses on the effectiveness of autologous platelet concentrates (APCs) in sinus lift and to assess the methodological quality of the included SRs. Three electronic databases have been explored. SRs and meta-analyses addressing the effectiveness of APCs in sinus lift technique were included. Clinical, radiographic and histomorphometric findings were considered for APCs as solely grafting materials and APCs in combination with biomaterials. Outcomes were implant survival rate (ISR), implant stability (IS), implant failure (IF), postoperative complications, histomorphometric findings, radiographic bone gain, bone volume and bone density. The methodological quality of the included SRs was assessed using the updated version of "A Measurement Tool to Assess Systematic Review" (AMSTAR-2). Thirty SRs were included. The methodological quality of the included reviews ranged from critically low (3 studies) to high (9 studies). The included SRs showed favorable clinical outcomes, short-term new bone formation and no biological complications when APCs were used both as solely graft material or in combination with other biomaterials. However, no significant additional effects in the long-term period were observed. APCs did not add any further positive effects compared to the physiological healing derived by the natural blood clot. The current overview of SRs highlighted the need for high-quality SRs evaluating the role of APCs in sinus lift though network meta-analyses, in order to identify the most powerful material for sinus lift augmentation. The use of APCs improves the healing of soft tissues and the postoperative quality of life in the short-term period. Thus, its application can be recommended.

Placement of immediate dental implants in extraction sockets exhibiting the apical pathosis. A meta-analysis.

Objectives: It is commonly accepted that immediate implantation is the best option for patients since it shortens the time patients must wait for ultimate restoration and provides a predictable functional and aesthetic result. However, this approach is still controversial in patients with apical pathosis. The goal of this systematic review and meta-analysis was to determine the efficacy of immediate implant insertion in patients with apical pathosis. Material and methods: Between 2000 and 2023, PRISMA-compliant keywords were used to search PubMed, MEDLINE, CENTRAL, and the Cochrane Library. All English-language clinical studies that met PICOS criteria were included in a manual search. The included studies' demographic profile and event data for immediate dental implantation success in patients with or without apical pathosis were meta-analyzed using RevMan. The implant survival rate was assessed using risk ratio of plaque index and bleeding index. Begg's test using MedCalc and RevMan risk of bias assessment assessed publication bias. Results: A meta-analysis of 10 trials with 849 dental implantation patients found a substantial difference in initial implant placement success rates in infected sites. The pooled risk ratio for plaque index is 0.59 (95% CI: 0.36-0.96) with heterogeneity of Tau2 = 0.62, chi2 = 109.69, df = 11, I2 = 90%, z = 2.12, and p < 0.05. While, the pooled risk ratio for bleeding index is 0.77 (95% CI: 0.60 to 0.98) with Tau2 = 0.16, chi2 = 103.67, df = 11, I2 = 89%, z = 2.12, and p < 0.05. The pooled odds ratio of implant survival rate is 2.08 (95% CI: 1.56 to 1.79) with Tau2 0.16; chi2 52.43; df 9; I2 83%; z 4.93 and p < 0.05. As evidenced by the funnel plot and statistically insignificant Begg's test p values of 0.45. Conclusion: The placement of immediate implants in locations affected by apical pathosis is a clinically beneficial surgery, resulting in favorable aesthetic and functional outcomes for patients.

Interdisciplinary all-on-four® concept for mandibular jaw in dental education - do students benefit from individual 3d printed models from real patient cases?

PURPOSE: Digitalization is assuming increasing significance in dental education, as dental students are increasingly exposed to digital implant planning and contemporary technologies such as 3D printing. In this study, we present a cohort analysis aimed at assessing the potential benefits derived from the utilization of 3D prints to seamlessly translate planned procedures into real-life applications. METHODS: 21 dental students participated in a virtual planning and hands-on course across two cohorts (C1: n = 10, C2: n = 11). The virtual implant planning phase involved the placement of four implants on an atrophic lower jaw model. Subsequently, Cohort 1 (C1) executed the implantation procedure on a prefabricated hands-on model, while Cohort 2 (C2) engaged with 3D prints representing their individual implant planning during the hands-on session. Subjective assessments of knowledge, skills, and the perceived utility of 3D prints were conducted through pre- and post-course questionnaires, utilizing a 5-point scale. RESULTS: In the subjective evaluation, 17 out of 21 participants expressed a positive appraisal of the use of personalized models. Notably, there was no statistically significant improvement in overall knowledge scores; however, there was a discernible increase of 0.5 points in the ratings related to perceived expertise and procedural abilities. CONCLUSION: While there was a notable increase in the subjective ratings of knowledge and abilities, no statistically significant difference was observed between the two groups. The consensus among dental students is that individually planned and printed implant models serve as a valuable and effective tool in hands-on courses.

In vivo study on osteogenic efficiency of nHA/ gel porous scaffold with nacre water-soluble matrix.

BACKGROUND/PURPOSE: Nano-hydroxyapatite (nHA)/ gel porous scaffolds loaded with WSM carriers are promising bone replacement materials that can improve osseointegration ability. This investigation aimed to evaluate the osteoinductive activity by implanting the composition of nano-hydroxyapatite (nHA)/ Gel porous scaffolds as a carrier of WSM via an animal model. MATERIALS AND METHODS: WSM was extracted and nHA was added to the matrix to construct porous composite scaffolds. The dose-effect curve of WSM concentration and alkaline phosphatase (ALP) activity was made by culturing rat osteoblasts and examining the absorbance. Three different materials were implanted into critical size defects (CSD) in the skulls of rats, which were further divided into four groups: WSM nHA /Gel group, n-WSM nHA /Gel group, HA powder group, and control group. RESULTS: WSM (150 µg/mL-250µg/mL) effectively improved the activity of ALP in rat osteoblasts. All rats in each group had normal healing. WSM-loaded nHA /Gel group showed better performance on newly-formed bone tissue of rat skull and back at 4th week and 8th week, respectively. At the 4th week, the network of woven bone formed in the WSM-loaded nHA/Gel scaffold material. At 8th week, the reticular trabecular bone in the WSM-loaded scaffold material became dense lamellar bone, and the defect was mature lamellar bone. In the subcutaneous implantation experiment, WSM-loaded nHA/Gel scaffold material showed a better performance of heterotopic ossification than the pure nHA/Gel scaffold material. CONCLUSION: WSM promotes osteoblast differentiation and bone mineralization. The results confirm that the nHA/ Gel Porous Scaffold with Nacre Water-Soluble Matrix has a significant bone promoting effect and can be used as a choice for tissue engineering to repair bone defects.

Orthodontic Implant Site Development Using Labial Root Torque: A Case Series with CBCT Analysis.

This case series assessed the efficacy of Orthodontic Implant Site Development with Labial Root Torque (OISD-LRT) as a nonsurgical technique for addressing labial bone deficiencies in seven patients. The procedure involved strategically placing a multi-bracket of 2-3 mm apically on the hopeless teeth, gradually shifting them with Ni-Ti wires at the rate of 2 mm per month and maintaining overcorrection for 2 months before extraction. OISD-LRT consistently augmented tissue for flapless guided implant surgery, with an average treatment duration of 404Å}311.7 days. Cone-beam computed tomography (CBCT) scans at various stages revealed increases in both vertical and horizontal bone dimensions, especially in the sockets with complete labial bone loss. Despite inevitable post-extraction reductions in bone height and width, sufficient dimensions were maintained to ensure long-term implant stability. This case series highlights the effectiveness of OISD-LRT as a valuable method for horizontal bone augmentation, particularly in patients with labial bone deficiency. This approach provides a robust foundation for subsequent implant placement, showcasing its success in addressing challenging anatomical conditions and contributing to the broader field of implant dentistry.