RESUMEN
In this study, we introduce a novel advancement in the field of theoretical exploration. Specifically, we investigate the transfer and trapping of electronic excitations within a two-component disordered system confined to a finite volume. The implications of our research extend to energy transfer phenomena on spherical nanoparticles, characterized by randomly distributed donors and acceptors on their surface. Utilizing the three-body Padé approximant technique, previously employed in single-component systems, we apply it to address the challenge of trapping within our system. To validate the robustness of our model, we conduct Monte Carlo simulations on a donor-acceptor system positioned on a spherical nanoparticle. In particular, very good agreement between the model and Monte Carlo simulations has been found for donor fluorescence intensity decay.
RESUMEN
BACKGROUND: Ultra high dose rate (UHDR) radiotherapy using ridge filter is a new treatment modality known as conformal FLASH that, when optimized for dose, dose rate (DR), and linear energy transfer (LET), has the potential to reduce damage to healthy tissue without sacrificing tumor killing efficacy via the FLASH effect. PURPOSE: Clinical implementation of conformal FLASH proton therapy has been limited by quality assurance (QA) challenges, which include direct measurement of UHDR and LET. Voxel DR distributions and LET spectra at planning target margins are paramount to the DR/LET-related sparing of organs at risk. We hereby present a methodology to achieve experimental validation of these parameters. METHODS: Dose, DR, and LET were measured for a conformal FLASH treatment plan involving a 250-MeV proton beam and a 3D-printed ridge filter designed to uniformly irradiate a spherical target. We measured dose and DR simultaneously using a 4D multi-layer strip ionization chamber (MLSIC) under UHDR conditions. Additionally, we developed an "under-sample and recover (USRe)" technique for a high-resolution pixelated semiconductor detector, Timepix3, to avoid event pile-up and to correct measured LET at high-proton-flux locations without undesirable beam modifications. Confirmation of these measurements was done using a MatriXX PT detector and by Monte Carlo (MC) simulations. RESULTS: MC conformal FLASH computed doses had gamma passing rates of >95% (3 mm/3% criteria) when compared to MatriXX PT and MLSIC data. At the lateral margin, DR showed average agreement values within 0.3% of simulation at 100 Gy/s and fluctuations â¼10% at 15 Gy/s. LET spectra in the proximal, lateral, and distal margins had Bhattacharyya distances of <1.3%. CONCLUSION: Our measurements with the MLSIC and Timepix3 detectors shown that the DR distributions for UHDR scenarios and LET spectra using USRe are in agreement with simulations. These results demonstrate that the methodology presented here can be used effectively for the experimental validation and QA of FLASH treatment plans.
RESUMEN
Lanthanide photoluminescence (PL) emission has attracted much attention for technological and bioimaging applications because of its particularly interesting features, such as narrow emission bands and very long PL lifetimes. However, this emission process necessitates a preceding step of energy transfer from suitable antennas. While biocompatible applications require luminophores that are stable in aqueous media, most lanthanide-based emitters are quenched by water molecules. Previously, we described a small luminophore, 8-methoxy-2-oxo-1,2,4,5-tetrahydrocyclopenta[de]quinoline-3-phosphonic acid (PAnt), which is capable of dynamically coordinating with Tb(III) and Eu(III), and its exchangeable behavior improved their performance in PL lifetime imaging microscopy (PLIM) compared with conventional lanthanide cryptate imaging agents. Herein, we report an in-depth photophysical and time-dependent density functional theory (TD-DFT) computational study that reveals different sensitization mechanisms for Eu(III) and Tb(III) in stable complexes formed in water. Understanding this unique behavior in aqueous media enables the exploration of different applications in bioimaging or novel emitting materials.
RESUMEN
Papain-like protease (PLpro) is an attractive anti-coronavirus target. The development of PLpro inhibitors, however, is hampered by the limitations of the existing PLpro assay and the scarcity of validated active compounds. We developed a novel in-cell PLpro assay based on BRET and used it to evaluate and discover SARS-CoV-2 PLpro inhibitors. The developed assay demonstrated remarkable sensitivity for detecting the reduction of intracellular PLpro activity while presenting high reliability and performance for inhibitor evaluation and high-throughput screening. Using this assay, three protease inhibitors were identified as novel PLpro inhibitors that are structurally disparate from those previously known. Subsequent enzymatic assays and ligand-protein interaction analysis based on molecular docking revealed that ceritinib directly inhibited PLpro, showing high geometric complementarity with the substrate-binding pocket in PLpro, whereas CA-074 methyl ester underwent intracellular hydrolysis, exposing a free carboxyhydroxyl group essential for hydrogen bonding with G266 in the BL2 groove, resulting in PLpro inhibition.
Asunto(s)
Simulación del Acoplamiento Molecular , Pirimidinas , SARS-CoV-2 , Sulfonas , Humanos , SARS-CoV-2/enzimología , SARS-CoV-2/efectos de los fármacos , Sulfonas/farmacología , Sulfonas/química , Pirimidinas/química , Pirimidinas/farmacología , Proteasas Similares a la Papaína de Coronavirus/antagonistas & inhibidores , Proteasas Similares a la Papaína de Coronavirus/metabolismo , Proteasas Similares a la Papaína de Coronavirus/química , Transferencia de Energía por Resonancia de Bioluminiscencia , Antivirales/farmacología , Antivirales/química , Antivirales/síntesis química , Inhibidores de Proteasas/farmacología , Inhibidores de Proteasas/química , Estructura Molecular , Relación Dosis-Respuesta a Droga , Relación Estructura-ActividadRESUMEN
Metal halide perovskite light-emitting diodes (PeLEDs) have exceptional color purity but designs that emit deep-blue color with high efficiency have not been fully achieved and become more difficult in the thin film of confined perovskite colloidal quantum dots (PeQDs) due to particle interaction. Here it is demonstrated that electronic coupling and energy transfer in PeQDs induce redshift in the emission by PeQD film, and consequently hinder deep-blue emission. To achieve deep-blue emission by avoiding electronic coupling and energy transfer, a QD-in-organic solid solution is introduced to physically separate the QDs in the film. This physical separation of QDs reduces the interaction between them yielding a blueshift of ≈7 nm in the emission spectrum. Moreover, using a hole-transporting organic molecule with a deep-lying highest occupied molecular orbital (≈6.0 eV) as the organic matrix, the formation of exciplex emission is suppressed. As a result, an unprecedently high maximum external quantum efficiency of 6.2% at 462 nm from QD-in-organic solid solution film in PeLEDs is achieved, which satisfies the deep-blue color coordinates of CIEy < 0.06. This work suggests an important material strategy to deepen blue emission without reducing the particle size to <≈4 nm.
RESUMEN
Lanthanide chelates with dimethyl(phenylsulfonyl)amidophosphate (labeled as HSP) and Lewis base ligands (bpy = 2,2;-bipyridine and phen = 1,10-phenanthroline) of formula Na[Ln(SP)4] (1Ln), [Ln(SP)3bpy] (2Ln); [Ln(SP)3phen] (3Ln) (Ln = Eu3+, Gd3+, Tb3+ and Lu3+) were obtained and characterized by the X-ray, photoluminescence spectroscopy at 293 and 77 K as well as by intrinsic (QLnLn) and overall (QLnL) luminescence quantum yields. These phosphors manifest a very strong emission after excitation in the UV range of the molecular singlet states (S1) and two of them have very high QLnL values (Eu3+ and Tb3+ chelates of the type 2Ln and 3Ln). The dynamics of the excited states are discussed based on the intramolecular energy transfer theory, considering the dipole-dipole, the dipole-multipole and the exchange mechanisms. From the calculated energy transfer rates, a rate equation model was constructed and, thus, the theoretical QLnL can be obtained. A good correlation between the experimentally determined and theoretically calculated QLnL values was achieved, with the triplet state (T1) playing a predominant role in the energy transfer process for Eu3+ compounds, while the sensitization for Tb3+ compounds is dominated by the energy transfer rates from the singlet state (S1).
RESUMEN
OBJECTIVE: The energy deposition of photons and protons differs. It depends on the position in the proton Bragg peak (BP) and the linear energy transfer (LET) leading to a variable relative biological effectiveness (RBE). Here, we investigate LET dependent alterations on metabolic viability and proliferation of sarcoma and endothelium cell lines following proton irradiation in comparison to photon exposure. Approach: Using a multi-step range shifter (MSRS), each column of a 96-well plate was positioned in a different depth along four BP curves with increasing intensities. The high-throughput experimental setup covers dose, LET, and RBE changes seen in a treatment field. Photon irradiation was performed to calculate the RBE along the BP curve. Two biological information out of one experiment were extracted allowing a correlation between metabolic viability and proliferation of the cells. Main results: The metabolic viability and cellular proliferation were column-wise altered showing a depth-dose profile. Endothelium cell viability recovers within 96 h post BP irradiation while sarcoma cell viability remains reduced. Highest RBE values were observed at the BP distal fall-off regarding proliferation of the sarcoma and endothelial cells. Significance: The high-throughput experimental setup introduced here I) covers dose, LET, and RBE changes seen in a treatment field, II) measures short-term effects within 48 h to 96 h post irradiation, and III) can additionally be transferred to various cell types without time consuming experimental adaptations. Traditionally, RBE values are calculated from clonogenic cell survival. Measured RBE profiles strongly depend on physical characteristics such as dose and LET and biological characteristics for example cell type and time point. Metabolic viability and proliferation proofed to be in a similar effect range compared to clonogenic survival results. Based on limited data of combined irradiation with doxorubicin, future experiments will test combined treatment with systemic therapies applied in clinics e.g. cyclin-dependent inhibitors. .
RESUMEN
Photodynamic therapy (PDT) is an appealing modality for cancer treatments. However, the limited tissue penetration depth of external-excitation light makes PDT impossible in treating deep-seated tumors. Meanwhile, tumor hypoxia and intracellular reductive microenvironment restrain the generation of reactive oxygen species (ROS). To overcome these limitations, a tumor-targeted self-illuminating supramolecular nanoparticle T-NPCe6-L-N is proposed by integrating photosensitizer Ce6 with luminol and nitric oxide (NO) for chemiluminescence resonance energy transfer (CRET)-activated PDT. The high H2O2 level in tumor can trigger chemiluminescence of luminol to realize CRET-activated PDT without exposure of external light. Meanwhile, the released NO significantly relieves tumor hypoxia via vascular normalization and reduces intracellular reductive GSH level, further enhancing ROS abundance. Importantly, due to the different ROS levels between cancer cells and normal cells, T-NPCe6-L-N can selectively trigger PDT in cancer cells while sparing normal cells, which ensured low side effect. The combination of CRET-based photosensitizer-activation and tumor microenvironment modulation overcomes the innate challenges of conventional PDT, demonstrating efficient inhibition of orthotopic and metastatic tumors on mice. It also provoked potent immunogenic cell death to ensure long-term suppression effects. The proof-of-concept research proved as a new strategy to solve the dilemma of PDT in treatment of deep-seated tumors.
RESUMEN
Oxygenic phototrophs use chlorophylls (Chls) as photosynthetically active pigments. A variety of Chl molecules have been found in photosynthetic eukaryotes including green plants, algae, and cyanobacteria. Here we review their molecular structures with stereochemistry, occurrence in light-harvesting antennas and reaction centers, biosyntheses in the late stage, chemical stabilities, and visible absorption maxima in diethyl ether. The observed maxima are comparable to those of semisynthetic Chl analogs, methyl pyropheophorbides, in dichloromethane. The effects of their peripheral substituents and core π-conjugation on the maxima of the monomeric states are discussed. Notably, the oxidation along the molecular x-axis in Chl-a produces its accessory pigments, Chls-b/c, and introduction of an electron-withdrawing formyl group along the y-axis perpendicular to the x-axis affords far-red light absorbing Chls-d/f.
RESUMEN
As a foodborne pathogen capable of causing severe illnesses, early detection of Escherichia coli O157:H7 (E. coli O157:H7) is crucial for ensuring food safety. While Förster resonance energy transfer (FRET) is an efficient and precise detection technique, there remains a need for amplification strategies to detect low concentrations of E. coli O157:H7. In this study, we presented a phage (M13)-induced "one to many" FRET platform for sensitively detecting E. coli O157:H7. The aptamers, which specifically recognize E. coli O157:H7 were attached to magnetic beads as capture probes for separating E. coli O157:H7 from food samples. The peptide O157S, which specifically targets E. coli O157:H7, and streptavidin binding peptide (SBP), which binds to streptavidin (SA), were displayed on the P3 and P8 proteins of M13, respectively, to construct the O157S-M13K07-SBP phage as a detection probe for signal output. Due to the precise distance (≈3.2 nm) between two neighboring N-terminus of P8 protein, the SA-labeled FRET donor and acceptor can be fixed at the Förster distance on the surface of O157S-M13K07-SBP via the binding of SA and SBP, inducing FRET. Moreover, the P8 protein, with ≈2700 copies, enabled multiple FRET (≈605) occurrences, amplifying FRET in each E. coli O157:H7 recognition event. The O157S-M13K07-SBP-based FRET sensor can detect E. coli O157:H7 at concentration as low as 6 CFU/mL and demonstrates excellent performance in terms of selectivity, detection time (≈3 h), accuracy, precision, practical application, and storage stability. In summary, we have developed a powerful tool for detecting various targets in food safety, environmental monitoring, and medical diagnosis.
RESUMEN
Bacterial extracellular vesicles (BEVs) are nano- or micrometer-sized membrane-bound lipid vesicles released from both Gram-negative and Gram-positive bacteria. Cellular transport, communication, pathogenesis, and host-pathogen interactions are some of the major biological processes impacted by BEVs. Among these, host-pathogen interactions and bacterial pathogenesis are emerging as highly important targetable avenues underlined by the issues of antimicrobial resistance, thus demanding novel targets and approaches to treat bacterial infections. In this aspect, the study of the interaction of BEVs with bacteria and/or host cells becomes imperative and brings the membrane fusion process to the forefront. Furthermore, membrane fusion also underscores the performance of BEVs as nano-therapeutic delivery platforms. Here, we report methods to study fusion kinetics between mycobacteria-derived extracellular vesicles, which we refer to as MEVs, and intact mycobacteria or MEVs themselves. We also discuss the isolation of MEVs and their characterization. We outline critical factors that affect fusion kinetics by MEVs. The same principle can be extended for studying fusion between BEVs and mammalian host cells important for understanding how BEVs influence host-pathogen crosstalk.
Asunto(s)
Vesículas Extracelulares , Interacciones Huésped-Patógeno , Fusión de Membrana , Vesículas Extracelulares/metabolismo , Humanos , Mycobacterium/metabolismo , AnimalesRESUMEN
It is still debated whether changes in metabolic flux are cause or consequence of contractile dysfunction in non-ischemic heart disease. We have previously proposed a model of cardiac metabolism grounded in a series of six moiety-conserved, interconnected cycles. In view of a recent interest to augment oxygen availability in heart failure through iron supplementation, we integrated this intervention in terms of moiety conservation. Examining published work from both human and murine models, we argue this strategy restores a mitochondrial cycle of energy transfer by enhancing mitochondrial pyruvate carrier (MPC) expression and providing pyruvate as a substrate for carboxylation and anaplerosis. Metabolomic data from failing heart muscle reveal elevated pyruvate levels with a concomitant decrease in the levels of Krebs cycle intermediates. Additionally, MPC is downregulated in the same failing hearts, as well as under hypoxic conditions. MPC expression increases upon mechanical unloading in the failing human heart, as does contractile function. We note that MPC deficiency also alters expression of enzymes involved in pyruvate carboxylation and decarboxylation, increases intermediates of biosynthetic pathways, and eventually leads to cardiac hypertrophy and dilated cardiomyopathy. Collectively, we propose that an unbroken chain of moiety-conserved cycles facilitates energy transfer in the heart. We refer to the transport and subsequent carboxylation of pyruvate in the mitochondrial matrix as an example and a proposed target for metabolic support to reverse impaired contractile function.
RESUMEN
Photon-upconversion nanoparticles (UCNP) have already been established as labels for affinity assays in analog and digital formats. Here, advanced, or smart, systems based on UCNPs coated with active shells, fluorescent dyes, and metal and semiconductor nanoparticles participating in energy transfer reactions are reviewed. In addition, switching elements can be embedded in such assemblies and provide temporal and spatial control of action, which is important for intracellular imaging and monitoring activities. Demonstration and critical comments on representative approaches demonstrating the progress in the use of such UCNPs in bioanalytical assays, imaging, and monitoring of target molecules in cells are reported, including particular examples in the field of cancer theranostics.
Asunto(s)
Nanopartículas , Fotones , Humanos , Nanopartículas/química , Colorantes Fluorescentes/química , Animales , Neoplasias/diagnóstico por imagen , Neoplasias/diagnóstico , Imagen ÓpticaRESUMEN
An upconversion fluorescence sensing platform was developed with upconversion nanoparticles (UCNPs) as energy donors and gold nanoparticles (AuNPs) as energy acceptors, based on the FRET principle. They were used for quantitative detection of uranyl ions (UO22+) by amplifying the signal of the hybrid chain reaction (HCR). When UO22+ are introduced, the FRET between AuNPs and UCNPs can be modulated through a HCR in the presence of high concentrations of sodium chloride. This platform provides exceptional sensitivity, with a detection limit as low as 68 pM for UO22+ recognition. We have successfully validated the reliability of this method by analyzing authentic water samples, achieving satisfactory recoveries (89.00%-112.50%) that are comparable to those of ICP-MS. These results indicate that the developed sensing platform has the capability to identify trace UO22+ in complex environmental samples.
RESUMEN
In designing thermally activated delayed fluorescence (TADF) emitters, a high reverse intersystem crossing (RISC) rate with a high photoluminescence quantum yield is essential. Herein, two blue TADF molecules, 2',5'-di(9H-carbazol-9-yl)-3',6'-bis(3,6-ditert-butyl-9H-carbazol-9-yl)-[1,1':4',1â³-terphenyl]-4,4â³-dicarbonitrile (CzTCzPhBN) and 2',5'-bis(3,6-ditert-butyl-9H-carbazol-9-yl)-3',6'-bis(3,6-diphenyl-9H-carbazol-9-yl)-[1,1':4',1â³-terphenyl]-4,4â³-dicarbonitrile (PhCzTCzPhBN) with a high RISC rate, were developed through donor engineering. CzTCzPhBN and PhCzTCzPhBN showed a high RISC rate of 4.00 × 105 and 16.62 × 105 s-1, respectively, with a high photoluminescence quantum yield of 80.1 and 84.9%, which resulted in high external quantum efficiency of 27.0 and 27.8% with color coordinates (0.148, 0.170) and (0.150, 0.230) in blue TADF organic light-emitting diodes, respectively. The high RISC rate and device efficiency inspired two TADF molecules to be used as sensitizers in hyperfluorescence devices. The hyperfluorescence devices showed ultra-high external quantum efficiency of 30.7 and 36.4% with color coordinates (0.125, 0.164) and (0.127, 0.193), respectively.
RESUMEN
This work reports the synthesis of chiral perovskite heterostructure films by combining a two-dimensional (2D) chiral (R-/S-MBA)2PbI4 perovskite with CsPbBr3 quantum dots (QDs). The as-synthesized chiral heterostructure films exhibit obvious circularly polarized luminescence (CPL) properties, even though pure 2D chiral perovskite cannot present photoluminescence. It indicates that the chirality of the excited state of the QDs originates from the 2D chiral perovskite. The circular polarization-resolved transient absorption (TA) spectra further demonstrate that the CPL response of heterostructure films originates from the energy transfer between the chiral perovskite layer and QDs layer and the suppression of spin relaxation, which induces the imbalance of the spin population of excited states in QDs layer. In addition, the photoluminescence (PL), circular dichroism (CD), and CPL spectra of these heterostructure films can be controlled by varying the thickness and component of the chiral perovskite layer, which demonstrates that the anion exchange between chiral perovskite and CsPbBr3 QDs can tune the chemical composition and optoelectronic properties due to the low bonding energy difference between them and decrease the strain within the QDs layer to reduce the radiative recombination lifetime. This work provides guidance for the synthesis of chiral perovskites with a strong CPL response and further provides insight into the origination of CPL.
RESUMEN
Organic afterglow with long-persistent luminescence (LPL) after photoexcitation is highly attractive, but the realization of narrowband afterglow with small full-width at half-maximum (FWHM) is a huge challenge since it is intrinsically contradictory to the triplet- and solid-state emission nature of organic afterglow. Here, narrow-band, long-lived, and full-color organic LPL is realized by isolating multi-resonant thermally activated delayed fluorescent (MR-TADF) fluorophores in a glassy steroid-type host through a facile melt-cooling treatment. Such prepared host becomes capable of exciton dissociation and recombination (EDR) upon photoirradiation for both long-lived fluorescence and phosphorescence; and, the efficient Förster resonance energy transfer (FRET) from the host to various MR-TADF emitters leads to high-performance LPL, exhibiting small FWHM of 33 nm, long persistent time over 10 s, and facile color-tuning in a wide range from deep-blue to orange (414-600 nm). Moreover, with the extraordinary narrowband LPL and easy processability of the material, centimeter-scale flexible optical waveguide fibers and integrated FWHM/color/lifetime-resolved multilevel encryption/decryption devices have been designed and fabricated. This novel EDR and singlet/triplet-to-singlet FRET strategy to achieve excellent LPL performances illustrates a promising way for constructing flexible organic afterglow with easy preparation methods, shedding valuable scientific insights into the design of narrow-band emission in organic afterglow.
RESUMEN
Oxygenic photosynthesis in Halomicronema hongdechloris, one of a series of cyanobacteria producing red-shifted Chl f, is adapted to varying light conditions by a range of diverse processes acting over largely different time scales. Acclimation to far-red light (FRL) above 700 nm over several days is mirrored by reversible changes in the Chl f content. In several cyanobacteria that undergo FRL photoacclimation, Chl d and Chl f are directly involved in excitation energy transfer in the antenna system, form the primary donor in photosystem I (PSI), and are also involved in electron transfer within photosystem II (PSII), most probably at the ChlD1 position, with efficient charge transfer happening with comparable kinetics to reaction centers containing Chl a. In H. hongdechloris, the formation of Chl f under FRL comes along with slow adaptive proteomic shifts like the rebuilding of the D1 complex on the time scale of days. On shorter time scales, much faster adaptation mechanisms exist involving the phycobilisomes (PBSs), which mainly contain allophycocyanin upon adaptation to FRL. Short illumination with white, blue, or red light leads to reactive oxygen species-driven mobilization of the PBSs on the time scale of seconds, in effect recoupling the PBSs with Chl f-containing PSII to re-establish efficient excitation energy transfer within minutes. In summary, H. hongdechloris reorganizes PSII to act as a molecular heat pump lifting excited states from Chl f to Chl a on the picosecond time scale in combination with a light-driven PBS reorganization acting on the time scale of seconds to minutes depending on the actual light conditions. Thus, structure-function relationships in photosynthetic energy and electron transport in H. hongdechloris including long-term adaptation processes cover 10-12 to 106 seconds, i.e., 18 orders of magnitude in time.
RESUMEN
Förster resonance energy transfer (FRET) serves as a critical mechanism to study intermolecular interactions and the formation of macromolecular assemblies. Cascade FRET is a multi-step FRET process which can overcome limitations associated with traditional single-step FRET. Herein, a novel organic-inorganic hybrid composed of a nile red derivative attached to the edge of the layered silicate clay Laponite (Lap-NR) was used to facilitate cascade FRET between Laponite sheets. Utilizing naphthalene-diimide edge-modified Laponite (Lap-NDI) as the initial donor, Rhodamine 6G on the basal surface of Laponite as the first acceptor, and Lap-NR as the second acceptor, cascade FRET was achieved. The influence of solvent composition in a DMF/water mixture on cascade FRET was investigated, revealing that a higher water content led to an enhancement of the cascade FRET process, which is attributed to increased aggregation-induced emission of Lap-NDI and the enhanced quantum yield of R6G in water. This study provides a unique approach to achieve cascade FRET by taking advantage of the anisotropic surface chemistry of a two-dimensional nanomaterial, providing a colloidally-driven alternative with improved tunability compared to macromolecular routes. The flexibility and simplicity of this approach will advance the state of the art of organic-inorganic hybrids for applications in optoelectronics, sensors, and hybrid photovoltaics.
RESUMEN
A promising kind of ternary chiral co-assemblies with high PLQY, large dissymmetry factor (glum), and narrowband multi-resonance characteristics are achieved by codoped-thermal annealing treatments of achiral luminescent polymer F8BT, chiral inducers R/S-5011, and achiral FRET acceptor DBN-ICZ. The optimized co-assemblies (F8BT)0.9-(R/S-5011)0.1-(DBN-ICZ)0.005 display narrowband yellow emission with full-width half maximum (FWHM) of 37 nm, PLQY of 79%, and intense CPL signals with |glum| of up to 0.26. Meaningfully, solution-processed CP-OLEDs by using those ternary chiral co-assemblies as emitting layer are successfully fabricated, which display yellow circularly polarized electroluminescence (CPEL) with EQEmax of 4.6% and gEL of up to 0.16. The corresponding Q-factor could reach up to 7.36 × 10-3, which is the highest of all the reported CP-OLEDs. Moreover, the devices also exhibit excellent comprehensive device performance with low Von of 7.0 V, high Lmax of about 25 000 cd m-2, extremely low efficiency roll-off with EQE of 4.3% at 10 000 cd m-2, as well as narrowband EL with FWHM of only 39 nm. The proposed ternary co-assembly strategy in fabricating CP-OLED provides the possibility to achieve high comprehensive device performance such as balancing high EQE and large gEL value, as well as narrowband emission, high brightness and low efficiency roll-off simultaneously.