RESUMEN
The formation conditions and functional property differences of esterified starch (ES) and granular esterified-pregelatinized starch (EPS) synchronously prepared by octenyl succinic anhydride (OSA) modification remain unclear. In this study, we explored the formation conditions and physicochemical properties of ES and EPS after OSA modification. The modification temperature controlled the formation amount and time for both starch types during OSA modification. Compared to ES, EPS exhibited a higher degree of substitution, cold-water swelling power, water-absorption capacity and apparent viscosity in cold water. The structural characterization confirmed the molecular weight and short/long-range molecular order of ES and EPS decreased. Moreover, scanning electron microscopy indicated EPS retained its granular morphology. The X-ray diffraction patterns confirmed the presence of more starch-lipid complexes formed in EPS than in ES. This study provides a novel method for preparing esterified and granularly esterified-pregelatinized starches that could be used as promising additives in low-energy formula foods.
RESUMEN
The aryl diester compound, 2-methyl-1,4-phenyl-ene bis-(3,5-di-bromo-benzoate), C21H12Br4O4, was synthesized by esterification of methyl hydro-quinone with 3,5-di-bromo-benzoic acid. A crystalline sample was obtained by cooling a sample of the melt (m.p. = 502â K/DSC) to room temperature. The mol-ecular structure consists of a central benzene ring with anti-3,5-di-bromo-benzoate groups symmetrically attached at the 1 and 4 positions and a methyl group attached at the 2 position of the central ring. In the crystal structure (space group P), mol-ecules of the title aryl diester are located on inversion centers imposing disorder of the methyl group and H atom across the central benzene ring. The crystal structure is consolidated by a network of C-Hâ¯Br hydrogen bonds in addition to weaker and offset π-π inter-actions involving the central benzene rings as well as the rings of the attached 3,5-di-bromo-benzoate groups.
RESUMEN
Microstructured reactors offer fast chemical engineering transfer and precise microfluidic control, enabling the determination of reactions' kinetic parameters. This review examines recent advancements in measuring microreaction kinetics. It explores kinetic modeling, reaction mechanisms, and intrinsic kinetic equations pertaining to two types of microreaction: esterification and transesterification reactions involving acids, bases, or biocatalysts. The utilization of a micro packed-bed reactor successfully achieves a harmonious combination of the micro-dispersion state and the reaction kinetic characteristics. Additionally, this review presents micro-process simulation software and explores the advanced integration of microreactors with spectroscopic analyses for reaction monitoring and data acquisition. Furthermore, it elaborates on the control principles of the micro platform. The superiority of online measurement, automation, and the digitalization of the microreaction process for kinetic measurements is highlighted, showcasing the vast prospects of artificial intelligence applications.
RESUMEN
Buckwheat sprouts are rich in pectic polysaccharides, which possess numerous health-improving benefits. However, the precise structure-activity relationship of pectic polysaccharides from Tartary buckwheat sprouts (TP) is still scant, which ultimately restricts their applications in the food industry. Hence, both ultrasound-assisted Fenton treatment (UAFT) and mild alkali treatment (MATT) were utilized for the modification of TP, and then the effects of physicochemical characteristics of original and modified TPs on their bioactivities were assessed. Our findings reveled that the UAFT treatment could precisely reduce TP's molecular weight, with the levels decreased from 8.191 × 104 Da to 0.957 × 104 Da. Meanwhile, the MATT treatment could precisely reduce TP's esterification degree, with the values decreased from 28.04 % to 4.72 %. Nevertheless, both UAFT and MATT treatments had limited effects on the backbone and branched chain of TP. Moreover, our findings unveiled that the UAFT treatment could notably promote TP's antioxidant, antiglycation, and immunostimulatory effects, while remarkedly reduce TP's anti-hyperlipidemic effect, which were probably owing to that the UAFT treatment obviously reduced TP's molecular weight. Additionally, the MATT treatment could also promote TP's immunostimulatory effect, which was probably attributed to that the MATT treatment significantly decreased TP's esterification degree. Interestingly, the MATT treatment could regulate TP's antioxidant and antiglycation effects, which was probably attributed to that the MATT treatment simultaneously reduced its esterification degree and bound phenolics. Our findings are conducive to understanding TP's structure-activity relationship, and can afford a scientific theoretical basis for the development of functional or healthy products based on TPs. Besides, the UAFT treatment can be a promising approach for the modification of TP to improve its biological functions.
Asunto(s)
Álcalis , Fagopyrum , Polisacáridos , Ondas Ultrasónicas , Fagopyrum/química , Polisacáridos/química , Polisacáridos/farmacología , Polisacáridos/aislamiento & purificación , Álcalis/química , Antioxidantes/química , Antioxidantes/farmacología , Hierro/química , Peróxido de Hidrógeno/química , Fenómenos Químicos , Animales , Peso MolecularRESUMEN
Background: Preeclampsia (PE) is a hypertensive disorder of pregnancy associated with adverse maternal and fetal outcomes. While placental dysfunction is implicated in PE pathogenesis, the impact of PE on placental lipid metabolism and its potential sexual dimorphism remains poorly understood. Methods: We conducted a comprehensive analysis of term placentas from PE and normotensive pregnancies with male and female fetuses. Lipid profiles were quantified using mass spectrometry, and mRNA expression of genes involved in fatty acid oxidation, esterification, and transport was assessed using qPCR. Results: Placentas from PE pregnancies exhibited elevated lipid levels, with male placentas showing a more pronounced increase in triacylglycerols, cholesteryl esters, and free cholesterol compared to female placentas. Gene expression analysis revealed sexually dimorphic alterations, with male PE placentas exhibiting upregulation of genes involved in fatty acid uptake, oxidation, and esterification, while female PE placentas showed a more complex response with both upregulation and downregulation of certain genes. Notably, peroxisomal fatty acid oxidation was upregulated in male PE placentas but suppressed in female PE placentas. Conclusions: Our findings reveal sexually dimorphic alterations in placental lipid metabolism in PE, suggesting that male placentas may be more vulnerable to lipotoxicity. These insights may have implications for understanding the pathogenesis of PE and developing sex-specific interventions to improve maternal and fetal outcomes.
RESUMEN
Chitosan is used in many applications due to its biodegradability, biocompatibility, nontoxicity, nonadhesiveness, and film-forming capabilities. Chitosan has antibacterial and antifungal activities, which are two of its other desirable attributes. However, chitosan can only dissolve in acidic liquids (1-3 % acetic acid), limiting its practical application. The hydroxyl and amino functional groups in the chitosan backbone are essential for chemical modification, which is a viable alternative for overcoming this obstacle. So, N- or O-, and N, O-substituted chitosan may yield derivatives with increased water solubility, biocompatibility, biodegradability, and bio-evaluation. In the same manner, the physicochemical properties of chitosan, including its mechanical and thermal properties, can be improved by cross-linking reactions. This review provides an overview of chitosan, including its origins and their solubility. Also, the review extend and discuss in details most of all chemical reactions that happened on the amino group, hydroxyl group, or both amino group and hydroxyl group to create modified chitosan-based organic materials. Finally, the problems that still need to be solved and probable future areas for study are discussed.
Asunto(s)
Quitosano , Solubilidad , Quitosano/química , Biopolímeros/química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacologíaRESUMEN
Aiming to contribute to the current knowledge on the impact of reaction conditions on the chemical structure and target properties of starch citrates, in the current contribution different corn starch citrates were prepared by manipulation of reaction time, temperature and citric acid concentration. Modified starches were characterized in terms of chemical structure, morphology, crystallinity, swelling power and resistant starch content. For the first time, total substitution, crosslinking and monosubstitution degrees were quantitatively determined; and the relationship among final chemical structure, reaction conditions and target starch citrates properties was comprehensively analyzed. Products with total substitution values in the range of 0.075-0.24, crosslinking degrees in the 0.005-0.11 interval, and monosubstitution extents within the 0.05-0.12 range, were produced. By proper selection of reaction conditions products with almost 100 % of resistant starch were obtained. Results evidenced that starch citrates properties (mainly swelling power and RS content) depend on both chemical structure and the reaction conditions employed. Actually, the reaction temperature set (120 °C or 150 °C) proved to play a determinant role in the final products properties as evidenced from starch citrates with similar chemical structure and substantially different swelling and digestibility properties.
RESUMEN
Grape seed proanthocyanidin (GSP), as a natural antioxidant, has great potential to be developed into a lipid-lowering agent, but its low lipophilicity and stability greatly limit its application. In this study, an enzymatic esterification strategy was developed to introduce fatty acid chains into GSP, resulting in the successful synthesis of a series of new GSP derivatives. The results showed that up to 85% conversion of GSP and 35% TAG inhibition rate of GSP derivatives were achieved. The structures of GSP derivatives were identified by UPLC-MS/MS, and seven derivatives were confirmed as catechin-3'-O-laurate, epicatechin-3'-O-laurate, epicatechin gallate-3â³,5â³-di-O-laurate, epicatechin gallate-3',3â³,5â³-tri-O-laurate, procyanidin B1-3',3â³-di-O-laurate, procyanidin B2-3',3â³-di-O-laurate and procyanidin C1-3',3â³,3â´-tri-O-laurate by NMR. GSP derivatives exhibited higher inhibitory effects on lipid accumulation, intracellular TAG and TC than parent GSP. These results indicate that GSP derivatives have potential as lipid-lowering agents for utilization in the food industry.
Asunto(s)
Catequina , Extracto de Semillas de Uva , Proantocianidinas , Proantocianidinas/farmacología , Proantocianidinas/química , Extracto de Semillas de Uva/farmacología , Extracto de Semillas de Uva/química , Catequina/análogos & derivados , Catequina/farmacología , Catequina/química , Hipolipemiantes/farmacología , Hipolipemiantes/química , Esterificación , Espectrometría de Masas en Tándem , Biflavonoides/farmacología , Biflavonoides/química , Antioxidantes/farmacología , Antioxidantes/química , Triglicéridos , HumanosRESUMEN
Hard carbons derived from pitch are considered a competitive low-cost anode for sodium-ion batteries. However, the preparation of pitch-based hard carbon (PHC) requires the aid of a pre-oxidation strategy, which introduces unnecessary defects and oxygen elements, which leads to low initial Coulombic efficiency (ICE) and poor cycling stability. Herein, we demonstrate a new surface engineering strategy by grafting chemically active glucose molecules on the PHC surface via esterification reactions, which can achieve low-cost nano-scaled carbon coating. Thin glucose coating can be carbonized at a lower temperature, which results in a more closed pore structure and fewer functional groups. The as prepared PHC exhibits a high reversible capacity of 328.5 mAh/g with a high ICE of 92.08 % at 0.02 A/g. It is noteworthy that the PHC can be adapted to a variety of cathode materials for full-cell assembling without pre-sodiation, which maintains the characteristics of high capacity and excellent cycling stability. The performance of resin-based hard carbon coated with a similar method was also improved, demonstrating the universality of the technique.
RESUMEN
Chalcones are a group with recognized biological potential against many diseases, including cancer. Thus, studies on these structure have become an attractive chemical strategy to optimize their biological activities. One of the synthetic routes used to obtain chalcone derivatives is esterification using either commercial acid chlorides or carboxylic acids. This work focuses on preparing chalcone derivatives and investigating their biological potential against cancer cells. Compound 1 was synthetized by Claisen-Schmidt condensation followed by esterification of the 3'-OH, resulting in eight compounds named 1a-b and 2a-f. All structures were confirmed by 1H and 13C NMR and FT-IR, and cytotoxicity was evaluated in the HCT 116 (colon adenocarcinoma), MCF-7 (breast adenocarcinoma), and CCD-18Co (nontumoral colon fibroblasts) cell lines. Chalcone derivatives were generally more active toward the colon cancer cell line, and 1a and 2b were selected for IC50 determination, presenting IC50 values of approximately 10 µM in HCT 116 cells and above 20 µM in both MCF7 and CDC-18-Co cells, suggesting moderate selectivity. Additionally, we tested compounds 1a and 2b in combination with doxorubicin, but they did not act synergistically with this anthracycline. In conclusion, considering these compounds obtained by the esterification reaction, 1a and 2d showed better results against cytotoxic cells.
RESUMEN
Epoxyeicosatrienoic acids (EpETrEs) are bioactive lipid mediators of arachidonic acid cytochrome P450 oxidation. In vivo, the free (unbound) form of EpETrEs regulate multiple processes including blood flow, angiogenesis and inflammation resolution. Free EpETrEs are thought to rapidly degrade via soluble epoxide hydrolase (sEH); yet, in many tissues, the majority of EpETrEs are esterified to complex lipids (e.g. phospholipids) suggesting that esterification may play a major role in regulating free, bioactive EpETrE levels. This hypothesis was tested by quantifying the metabolism of intraperitoneally injected free d11-11(12)-Epoxyeicosatrienoic acid (d11-11(12)-EpETrE) in male and female rats. Plasma and tissues (liver, adipose and brain) were obtained 3 to 4 min later and assayed for d11-11(12)-EpETrE and its sEH metabolite, d11-11,12-dihydroxyeicosatrienoic acid (d11-11,12-diHETrE) in both the free and esterified lipid fractions. In both males and females, the majority of injected tracer was recovered in liver followed by plasma and adipose. No tracer was detected in the brain, indicating that brain levels are maintained by endogenous synthesis from precursor fatty acids. In plasma, liver, and adipose, the majority (>54 %) of d11-11(12)-EpETrE was found esterified to phospholipids or neutral lipids (triglycerides and cholesteryl esters). sEH-derived d11-11,12-diHETrE was not detected in plasma or tissues, suggesting negligible conversion within the 3-4 min period post tracer injection. This study shows that esterification is the main pathway regulating free 11(12)-EpETrE levels in vivo.
RESUMEN
Pectin, a polysaccharide found in plant cell walls, is characterized by a high abundance of hydroxyl groups and carboxylic acid groups, which results in a strong affinity for water and limits its suitability as a film material. This study aimed to modulate the esterification degree of PEC films by adjusting the concentration of acetic anhydride, and assess the impact of acetic anhydride esterification modification on the properties of the resultant PEC films. The results demonstrated successful grafting of acetic anhydride onto the galacturonic acid ring in the PEC molecule through the esterification process. The hydrophobicity, thermal stability, barrier properties, and mechanical properties of the esterified PEC films were investigated. Among the various concentrations tested, the E-PEC-0.25 film exhibited the highest contact angle of 103.46° and tensile strength of 33.44 MPa, showcasing optimal performance. The E-PEC-0.1 film achieved the highest esterification degree of 0.94 and elongation at a break of 21.11 %. It also exhibited the transparency of 11.66 and the lowest water vapor transmission rate of 0.56 g·mm/(m2·h·kpa). Additionally, TGA and DSC tests revealed enhanced thermal stability of the esterification-prepared films. These findings highlight the potential of acetic anhydride tuning as a promising strategy for optimizing pectin film production.
Asunto(s)
Anhídridos Acéticos , Interacciones Hidrofóbicas e Hidrofílicas , Pectinas , Pectinas/química , Esterificación , Anhídridos Acéticos/química , Resistencia a la Tracción , TemperaturaRESUMEN
Here, we report a study of the effect of the blocking agent on the properties of the lipase from Thermomyces lanuginosus (TLL) immobilized on a heterofunctional support (Purolite C18-ethylnediamina (EDA)- vinyl sulfone (VS)-TLL-blocking agent) in different reactions. The performance of the biocatalysts was compared to those immobilized on standard hydrophobic support (Purolite C18-TLL) and the commercial one (TLL-IM). The nature of the blocking agent (Cys, Gly and Asp) altered the enzyme features. TLL-IM always gave a comparatively worse performance, with its specificity for the oil being very different to the Purolite biocatalysts. Under optimized conditions, Purolite C18-TLL yielded 97 % of hydrolysis conversion after 4 h using a water/waste cooking soybean oil (WCSO) mass ratio of 4.3, biocatalyst load of 6.5 wt% and a temperature of 44.2 °C (without buffer or emulsification agent). In esterification reactions of the purified free fatty acids (FFAs) obtained from WCSO, the best TLL biocatalysts depended on the utilized alcohol: linear amyl alcohol was preferred by Purolite C18-TLL and Purolite C18-EDA-VS-TLL-Gly, while higher activity was achieved utilizing isoamyl alcohol as nucleophile by Purolite C18-EDA-VS-TLL-Cys, Purolite C18-EDA-VS-TLL-Asp and IM-TLL as catalysts. All the results indicate the influence of the blocking step on the final biocatalyst features.
Asunto(s)
Enzimas Inmovilizadas , Eurotiales , Lipasa , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Lipasa/química , Lipasa/metabolismo , Esterificación , Eurotiales/enzimología , Biocatálisis , Hidrólisis , Sulfonas/química , Sulfonas/farmacología , TemperaturaRESUMEN
Hyaluronic acid (HA), a major component of skin extracellular matrix, provides an excellent framework for hemostatic design; however, there still lacks HA materials tailored with superior mechanical properties to address non-compressible hemorrhages. Here, we present a solvent-free thermal approach for constructing a shape-memory HA sponge for this application. Following facile thermal incubation around 130 °C, HA underwent cross-linking via esterification with poly(acrylic acid) within the sponge pre-shaped through a prior freeze-drying process. The resulting sponge system exhibited extensively interconnected macropores with a high fluid absorption capacity, excellent shape-memory property, and robust mechanical elasticity. When introduced to whole blood in vitro, the HA sponges demonstrated remarkable hemostatic properties, yielding a shorter coagulation time and lower blood clotting index compared to the commercial gelatin sponge (GS). Furthermore, in vivo hemostatic studies involving two non-compressible hemorrhage models (rat liver volume defect injury or femoral artery injury) achieved a significant reduction of approximately 64% (or 56%) and 73% (or 70%) in bleeding time and blood loss, respectively, which also outperformed GS. Additionally, comprehensive in vitro and in vivo evaluations suggested the good biocompatibility and biodegradability of HA sponges. This study highlights the substantial potential for utilizing the designed HA sponges in massive bleeding management.
Asunto(s)
Hemorragia , Ácido Hialurónico , Ácido Hialurónico/química , Ácido Hialurónico/farmacología , Animales , Hemorragia/tratamiento farmacológico , Ratas , Hemostáticos/química , Hemostáticos/farmacología , Temperatura , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Coagulación Sanguínea/efectos de los fármacos , Masculino , Porosidad , Ratas Sprague-DawleyRESUMEN
Angiogenesis is a normal physiological process that also contributes to diabetic retinopathy-related complications and facilitates tumor metastasis by promoting the hematogenic dissemination of malignant cells from solid tumors. Here, we investigated the in vitro, ex vivo, and in vivo anti-angiogenic activity of phloridzin docosahexaenoate (PZ-DHA), a novel ω-3 fatty acid ester of a flavonoid precursor. Human umbilical vein endothelial cells (HUVEC) and human dermal microvascular endothelial cells (HMVEC) treated with a sub-cytotoxic concentration of PZ-DHA to assess in vitro anti-angiogenic activity showed impaired tubule formation on a Matrigel matrix. Ex vivo angiogenesis was measured using rat thoracic aortas, which exhibited reduced vessel sprouting and tubule formation in the presence of PZ-DHA. Female BALB/c mice bearing VEGF165- and basic fibroblast growth factor-containing Matrigel plugs showed a significant reduction in blood vessel development following PZ-DHA treatment. PZ-DHA inhibited HUVEC and HMVEC proliferation, as well as the migration of HUVECs in gap closure and trans-well cell migration assays. PZ-DHA inhibited upstream and downstream components of the Akt pathway and vascular endothelial growth factor (VEGF165)-induced overexpression of small molecular Rho GTPases in HUVECs, suggesting a decrease in actin cytoskeletal-mediated stress fiber formation and migration. Taken together, these findings reveal the potential of combined food biomolecules in PZ-DHA to inhibit angiogenesis.
Asunto(s)
Diferenciación Celular , Movimiento Celular , Proliferación Celular , Células Endoteliales de la Vena Umbilical Humana , Ratones Endogámicos BALB C , Humanos , Animales , Movimiento Celular/efectos de los fármacos , Células Endoteliales de la Vena Umbilical Humana/efectos de los fármacos , Células Endoteliales de la Vena Umbilical Humana/metabolismo , Proliferación Celular/efectos de los fármacos , Femenino , Ratones , Diferenciación Celular/efectos de los fármacos , Ratas , Ácidos Docosahexaenoicos/farmacología , Inhibidores de la Angiogénesis/farmacología , Florizina/farmacología , Ácidos Grasos Omega-3/farmacología , Neovascularización Fisiológica/efectos de los fármacos , Células Endoteliales/efectos de los fármacos , Células Endoteliales/metabolismo , Factor A de Crecimiento Endotelial Vascular/metabolismo , Factor A de Crecimiento Endotelial Vascular/farmacología , Flavonoides/farmacología , AngiogénesisRESUMEN
This study investigates the optimization of fabric dyeing using natural dyes extracted from Clitoria ternatea, Cudrania javanensis, and Hibiscus sabdarifa by enhancing the mordanting process with citric acid. The principle of adding citric acid is as a crosslinker agent between cotton fabric and dye through an esterification reaction. A central composite design (CCD) of the response surface methodology (RSM) is employed to optimize parameters. Three mordanting variations and dyeing parameters, such as temperature and time, are considered. Results indicate that pre-mordanting yields superior outcomes, with optimal temperature and time at 65 °C and 82 min, respectively. Cotton fabric dyed with Cudrania javanensis and citric acid exhibits the highest color durability. This study successfully demonstrates the effectiveness of pre-mordanting, meta-mordanting, and post-mordanting methods with optimized conditions for achieving optimal coloring outcomes, particularly highlighting the efficacy of citric acid as a crosslinking agent.
Asunto(s)
Ácido Cítrico , Colorantes , Fibra de Algodón , Ácido Cítrico/química , Colorantes/química , Textiles , TemperaturaRESUMEN
This study optimized subcritical water extraction (SWE) conditions to maximize pectin yield from cocoa pod husk (CPH) and compared the characteristics of CPH pectin extracted through SWE with those of CPH pectin obtained through conventional extraction (CE) with citric acid. The Box-Behnken experimental design was employed to optimize SWE and examine the influence of process parameters, including temperature (100 °C-120 °C), extraction time (10-30 min), and solid:liquid ratio (SLR) (1:30-2:30 g/mL), on pectin yield. The maximum pectin yield of 6.58% was obtained under the optimal extraction conditions of 120 °C for 10 min with 1:15 g/mL SLR and closely corresponded with the predicted value of 7.29%. Compared with CE, SWE generated a higher yield and resulted in a higher degree of esterification, methoxyl content, and anhydrouronic acid value but a lower equivalent weight. The extracted pectin was pure, had low-methoxyl content, and similar melting and degradation temperatures.
Asunto(s)
Cacao , Pectinas , Pectinas/aislamiento & purificación , Pectinas/química , Cacao/química , Extractos Vegetales/química , Extractos Vegetales/aislamiento & purificación , Agua/química , Fraccionamiento Químico/métodosRESUMEN
Three-liquid-phase systems (TLPSs) are novel interfacial enzymatic reaction systems that have been successfully applied in many valuable reactions. However, these systems are suitable only for hydrolysis reactions and not for more widely used esterification reactions. Surprisingly, our recent research revealed that two water-insoluble substrates (ß-sitosterol and conjugated linoleic acid) could be rapidly esterified in this system. The initial rate of the esterification reaction in the TLPS based on sodium citrate was enhanced by approximately 10-fold relative to that in a traditional water/n-hexane system. The special emulsion structure (S/W1/W2 emulsion) formed may be vital because it not only provides a larger reaction interface but also spontaneously generates a middle phase that might regulate water activity to facilitate esterification. Furthermore, the lipase-enriched phase could be reused at least 8 times without significant loss of catalytic efficiency. Therefore, this TLPS is an ideal enzymatic esterification platform for ester synthesis because it is efficient, convenient to use, and cost-effective.
Asunto(s)
Lipasa , Sitoesteroles , Citrato de Sodio , Agua , Esterificación , Sitoesteroles/química , Lipasa/química , Lipasa/metabolismo , Citrato de Sodio/química , Agua/química , Biocatálisis , Ácidos Linoleicos Conjugados/química , Emulsiones/químicaRESUMEN
Phytosterols are structurally similar to cholesterol but they are much less absorbed (<2%) than cholesterol (>50%) in the intestine. We hypothesize that phytosterols are poor substrates of intestinal acyl-CoA: cholesterol acyltransferase 2 (ACAT2), and thus minimal phytosterol esters are formed and packed into chylomicrons, leading to their low absorption. Two isotope tracing models, including a radioactive hamster microsomal ACAT2 reaction model and a differentiated Caco-2 cell model, were established to examine the specificity of ACAT2 to various sterols, including cholesterol, sitosterol, stigmasterol, and campesterol. Both models consistently demonstrated that only cholesterol but not phytosterols could be efficiently esterified by ACAT2 in a time- and dose-dependent manner. Molecular docking further suggested that unfavorable interactions existed between ACAT2 and phytosterols. In conclusion, phytosterols are poor substrates of ACAT2 and thus minimally absorbed. This work provides a theoretical basis for the use of phytosterol-based supplements in treating dyslipidemia and preventing heart diseases.
Asunto(s)
Colesterol , Fitosteroles , Fitosteroles/metabolismo , Fitosteroles/química , Humanos , Animales , Células CACO-2 , Colesterol/metabolismo , Colesterol/química , Cricetinae , Esterol O-Aciltransferasa/metabolismo , Esterol O-Aciltransferasa/química , Absorción Intestinal , Esterol O-Aciltransferasa 2/metabolismo , Esterol O-Aciltransferasa 2/química , Simulación del Acoplamiento MolecularRESUMEN
An efficient method was discovered for catalyzing the esterification under air using Novozym 435 to obtain pyridine esters. The following conditions were found to be optimal: 60 mg of Novozyme 435, 5.0 mL of n-hexane, a molar ratio of 2:1 for nicotinic acids (0.4 mmol) to alcohols (0.2 mmol), 0.25 g of molecular sieve 3A, a revolution speed of 150 rpm, a reaction temperature of 50 °C, and reaction time of 48 h. Under nine cycles of Novozym 435, the 80 % yield was consistently obtained. Optimum conditions were used to synthesize 23 pyridine esters, including five novel compounds. Among them, gas chromatography-mass spectrometry-olfactometry (GC-MS-O) showed phenethyl nicotinate (3g), (E)-hex-4-en-1-yl nicotinate (3m), and octyl nicotinate (3n) possessed strong aromas. Thermogravimetric analysis (TG) revealed that the compounds 3g, 3m and 3n exhibited stability at the specified temperature. This finding provides theoretical support for adding pyridine esters fragrance to high-temperature processed food.