An Optimized High-Resolution Mapping Method for Glucocorticoid Receptor-DNA Binding in Mouse Primary Macrophages.

ChIP-exo is a powerful tool for achieving enhanced sensitivity and single-base-pair resolution of transcription factor (TF) binding, which utilizes a combination of chromatin immunoprecipitation (ChIP) and lambda exonuclease digestion (exo) followed by high-throughput sequencing. ChIP-nexus (chromatin immunoprecipitation experiments with nucleotide resolution through exonuclease, unique barcode, and single ligation) is an updated and simplified version of the original ChIP-exo method, which has reported an efficient adapter ligation through the DNA circularization step. Building upon an established method, we present a protocol for generating NGS (next-generation sequencing) ready and high-quality ChIP-nexus library for glucocorticoid receptor (GR). This method is specifically optimized for bone marrow-derived macrophage (BMDM) cells. The protocol is initiated by the formation of DNA-protein cross-links in intact cells. This is followed by chromatin shearing, chromatin immunoprecipitation, ligation of sequencing adapters, digestion of adapter-ligated DNA using lambda exonuclease, and purification of single-stranded DNA for circularization and library amplification.

Retinal vasculopathy with cerebral leukoencephalopathy and systemic manifestations in conjunction with systemic lupus erythematosus: Missed diagnosis or misdiagnosis?

BACKGROUND: Retinal vasculopathy with cerebral leukoencephalopathy and systemic manifestations (RVCL-S) is a rare autosomal dominant systemic microvascular disorder attributed to TREX1 (three-prime repair exonuclease-1) gene mutations, often proned to misdiagnosed. METHODS: We reported a case of RVCL-S coexisting with systemic lupus erythematosus due to a mutation in the TREX1 gene. This study provided a summary and discussion of previously documented cases related to TREX1 mutations or RVCL-S. RESULTS: A 39-year-old female patient visited the clinic due to progressive memory loss and speech difficulties. Magnetic resonance imaging results showed corpus callosum atrophy and multiple subcortical calcifications in both brain hemispheres. Genetic testing revealed a TREX1 gene mutation (c.294dupA). Treatment with immunosuppressive therapy for 2 months led to improvements in communication and mobility. We also summarized previously reported cases providing an overview of TREX1 gene mutation or RCVL-S. CONCLUSION: Our case establishes a compelling foundation for future RVCL-S diagnosis and treatment paradigms. Notably, conducting systemic immunity screening in patients with RVCL-S emerges as a strategic approach to prevent potential diagnostic oversights.

Visual Evidence for the Recruitment of Four Enzymes with RNase Activity to the Bacillus subtilis Replication Forks.

Removal of RNA/DNA hybrids for the maturation of Okazaki fragments on the lagging strand, or due to misincorporation of ribonucleotides by DNA polymerases, is essential for all types of cells. In prokaryotic cells such as Escherichia coli, DNA polymerase 1 and RNase HI are supposed to remove RNA from Okazaki fragments, but many bacteria lack HI-type RNases, such as Bacillus subtilis. Previous work has demonstrated in vitro that four proteins are able to remove RNA from RNA/DNA hybrids, but their actual contribution to DNA replication is unclear. We have studied the dynamics of DNA polymerase A (similar to Pol 1), 5'->3' exonuclease ExoR, and the two endoribonucleases RNase HII and HIII in B. subtilis using single-molecule tracking. We found that all four enzymes show a localization pattern similar to that of replicative DNA helicase. By scoring the distance of tracks to replication forks, we found that all four enzymes are enriched at DNA replication centers. After inducing UV damage, RNase HIII was even more strongly recruited to the replication forks, and PolA showed a more static behavior, indicative of longer binding events, whereas RNase HII and ExoR showed no response. Inhibition of replication by 6(p hydroxyphenylazo)-uracil (HPUra) demonstrated that both RNase HII and RNase HIII are directly involved in the replication. We found that the absence of ExoR increases the likelihood of RNase HIII at the forks, indicating that substrate availability rather than direct protein interactions may be a major driver for the recruitment of RNases to the lagging strands. Thus, B. subtilis replication forks appear to be an intermediate between E. coli type and eukaryotic replication forks and employ a multitude of RNases, rather than any dedicated enzyme for RNA/DNA hybrid removal.

An Insight into the Mechanism of DNA Cleavage by DNA Endonuclease from the Hyperthermophilic Archaeon Pyrococcus furiosus.

Hyperthermophilic archaea such as Pyrococcus furiosus survive under very aggressive environmental conditions by occupying niches inaccessible to representatives of other domains of life. The ability to survive such severe living conditions must be ensured by extraordinarily efficient mechanisms of DNA processing, including repair. Therefore, in this study, we compared kinetics of conformational changes of DNA Endonuclease Q from P. furiosus during its interaction with various DNA substrates containing an analog of an apurinic/apyrimidinic site (F-site), hypoxanthine, uracil, 5,6-dihydrouracil, the α-anomer of adenosine, or 1,N6-ethenoadenosine. Our examination of DNA cleavage activity and fluorescence time courses characterizing conformational changes of the dye-labeled DNA substrates during the interaction with EndoQ revealed that the enzyme induces multiple conformational changes of DNA in the course of binding. Moreover, the obtained data suggested that the formation of the enzyme-substrate complex can proceed through dissimilar kinetic pathways, resulting in different types of DNA conformational changes, which probably allow the enzyme to perform its biological function at an extreme temperature.

Enzyme-aided amplification strategy for sensitive detection of methamphetamine based on fluorescence aptamer sensor.

Methamphetamine (METH) abuse poses a serious risk to human health and social stability. It is critical to develop sensitive and selective methods for detecting METH. Here, we develop a fluorescence aptamer sensor to detect METH based on DNA exonuclease III (Exo III), graphene oxide (GO), and FAM-labeled aptamer. First, the sensor used GO's strong binding capacity to adsorb and quench the fluorescence of the aptamer attached to GO surface. When METH was added to the system, the formation of stable complex for aptamer and METH dissociated from the surface of GO, leading to a fluorescence restoration. Then, the fluorescence signal was further amplified by using Exo III to liberate target METH for cyclic hybridization. And the gel electrophoresis experiment further verified the reliability of this strategy. This aptamer sensor exhibited a low detection limit (0.52 nM) and excellent selectivity under optimal conditions. Notably, this sensor has been successfully validated in the detection of METH in urine and saliva samples, exhibited commendable recovery (94.00-104.65%). Its benefits include facile, sensitive, and rapid. Expected to be used in practical METH detection.

Dual-mode detection of glucose based on pistol-like DNAzyme-mediated exonuclease-assisted signal cycle.

Detecting glucose accurately and sensitively from clinical samples like tears and saliva is still difficult. We have created a sensor that can detect glucose with high sensitivity and accuracy by combining the use of glucose oxidase (GOx) to catalyze glucose, a pistol-like DNAzyme (PLDz) to transform the signal, gold nanoparticles (AuNPs) to enhance the optical properties and the exonuclease-III (Exo-III) to amplify the signal. As a result, the proposed method exhibits a low detection limit of 7.5 pM and a wide detection range covering seven orders of magnitude. The suggested dual-mode strategy provides a sensitive, precise and specific detection method for glucose. Another advantage is that the dual-mode technique significantly improves the precision and consistency of the measurements, demonstrating its immense potential for use in biomedical research and clinical diagnostics.

[Box: see text].

Aicardi-Goutières Syndrome Type 1: A Novel Missense Variant and Review of the Mutational Spectrum.

Objectives: Mutations in the TREX1 gene cause Aicardi-Goutières syndrome (AGS) 1, associated with a spectrum of autoimmune and neurodegenerative manifestations. AGS 1, the most severe neonatal type of AGS, is characterized by abnormal neurologic findings, visual inattention, hepatosplenomegaly, thrombocytopenia, skin rash, restlessness, and fever. Materials & Methods: The present study described two affected siblings from an Iranian family whose phenotypes overlap with intrauterine infections. They had almost similar presentations, including developmental delay, microcephaly, no fix and follow epileptic seizures and the same pattern of brain CT scan involvements. Following clinical and paraclinical assessments, whole-exome sequencing was employed to determine the disease-causing variant, and subsequently, PCR-Sanger sequencing was performed to indicate the segregation pattern of the candidate variant in family members. Results: Genetic analysis revealed a novel homozygous missense variant (c.461A>C; p.D154A) in the TREX1 gene in affected family members. Sanger sequencing of other family members showed the expected zygosities. Conclusion: This study identifies a novel mutation in the TREX1 gene in this family and highlights the efficiency of next-generation sequencing-based techniques for obtaining a definite diagnosis in patients with early-onset encephalopathy.

Engineering psychrophilic polymerase for nanopore long-read sequencing.

Unveiling the potential application of psychrophilic polymerases as candidates for polymerase-nanopore long-read sequencing presents a departure from conventional choices such as thermophilic Bacillus stearothermophilus (Bst) renowned for its limitation in temperature and mesophilic Bacillus subtilis phage (phi29) polymerases for limitations in strong exonuclease activity and weak salt tolerance. Exploiting the PB-Bst fusion DNA polymerases from Psychrobacillus (PB) and Bacillus stearothermophilus (Bst), our structural and biochemical analysis reveal a remarkable enhancement in salt tolerance and a concurrent reduction in exonuclease activity, achieved through targeted substitution of a pivotal functional domain. The sulfolobus 7-kDa protein (Sso7d) emerges as a standout fusion domain, imparting significant improvements in PB-Bst processivity. Notably, this study elucidates additional functional sites regulating exonuclease activity (Asp43 and Glu45) and processivity using artificial nucleotides (Glu266, Gln283, Leu334, Glu335, Ser426, and Asp430). By disclosing the intricate dynamics in exonuclease activity, strand displacement, and artificial nucleotide-based processivity at specific functional sites, our findings not only advance the fundamental understanding of psychrophilic polymerases but also provide novel insights into polymerase engineering.

High-Resolution Characterization of DNA/Protein Complexes in Living Bacteria.

The occurrence of DNA looping is ubiquitous. This process plays a well-documented role in the regulation of prokaryotic gene expression, such as in regulation of the Escherichia coli lactose (lac) operon. Here we present two complementary methods for high-resolution in vivo detection of DNA/protein binding within the bacterial nucleoid by using either chromatin immunoprecipitation combined with phage λ exonuclease digestion (ChIP-exo) or chromatin endogenous cleavage (ChEC), coupled with ligation-mediated polymerase chain reaction (LM-PCR) and Southern blot analysis. As an example, we apply these in vivo protein-mapping methods to E. coli to show direct binding of architectural proteins in the Lac repressor-mediated DNA repression loop.

Simultaneous Hg2+ and Pb2+ detection in water samples using an electrochemical aptasensor with dual signal amplification by exonuclease III and metal-organic frameworks.

Heavy metal pollution in the environment has become a significant global concern due to its detrimental effects on human health and the environment. In this study, we report an electrochemical aptasensor for the simultaneous detection of Hg2+ and Pb2+. Gold nanoflower/polyethyleneimine-reduced graphene oxide (AuNFs/PEI-rGO) was introduced on the surface of a gold electrode to improve sensing performance. The aptasensor is based on the formation of a T-Hg2+-T mismatch structure and specific cleavage of the Pb2+-dependent DNAzyme, resulting in a dual signal generated by the Exo III specific digestion of methylene blue (MB) labeled at the 3' end of probe DNA-1 and the reduction of the substrate ascorbic acid (AA) catalyzed by the signal label. The decrease of MB signal and the increase of AA oxidation peak was used to indicate the content of Hg2+ and Pb2+, respectively, with detection limits of 0.11 pM (Hg2+) and 0.093 pM (Pb2+). The aptasensor was also used for detecting Hg2+ and Pb2+ in water samples with good recoveries. Overall, this electrochemical aptasensor shows promising potential for sensitive and selective detection of heavy metals in environmental samples.

Click chemistry-based fluorescence polarization sensor for sensitive detection of ampicillin.

Ampicillin (AMP) is a ß-lactam antibiotic that can inhibit bacterial wall synthesis. The overuse and misuse of AMP makes it micropollutant that commonly found in food and various environmental media. In this work, a fluorescence polarization sensor was designed to sensitive detection of trace ampicillin based on click chemistry, using graphene oxide (GO) as a fluorescence polarization (FP) signal enhancement element. First, when ampicillin binds to its aptamer (apt), the adjacent alkyne and azide groups are separated, hindering the click-linking reaction. When Carboxyfluorescein (FAM) fluorophore-labeled probe (C-FAM) is added, its protruding 3-terminal FAM is recognized and cleaved by exonuclease I (EXO I), releasing fluorophores free that could not be adsorbed on GO, resulting in a lo0wer polarization signal. If there is no AMP in the system, aptamer probe is connected to its complementary chain ends by a click reaction. After C-FAM hybridizes with apt, the apt/P duplex is opened and the prominent single-stranded ends adsorb on the GO, leading a significantly enhanced FP signal. According to the relationship between the difference in FP values and the concentrations of AMP, the limit of detection of proposed method is as low as 80 pg/mL. This assay has a wide linear range plus excellent selectivity, and has been applied to detect AMP in milk and river water samples with satisfactory results, which demonstrates that the FP sensor has great potential for practical applications in food safety and environmental protection fields.

Bacterial exonuclease III expands its enzymatic activities on single-stranded DNA.

Bacterial exonuclease III (ExoIII), widely acknowledged for specifically targeting double-stranded DNA (dsDNA), has been documented as a DNA repair-associated nuclease with apurinic/apyrimidinic (AP)-endonuclease and 3'→5' exonuclease activities. Due to these enzymatic properties, ExoIII has been broadly applied in molecular biosensors. Here, we demonstrate that ExoIII (Escherichia coli) possesses highly active enzymatic activities on ssDNA. By using a range of ssDNA fluorescence-quenching reporters and fluorophore-labeled probes coupled with mass spectrometry analysis, we found ExoIII cleaved the ssDNA at 5'-bond of phosphodiester from 3' to 5' end by both exonuclease and endonuclease activities. Additional point mutation analysis identified the critical residues for the ssDNase action of ExoIII and suggested the activity shared the same active center with the dsDNA-targeted activities of ExoIII. Notably, ExoIII could also digest the dsDNA structures containing 3'-end ssDNA. Considering most ExoIII-assisted molecular biosensors require the involvement of single-stranded DNA (ssDNA) or nucleic acid aptamer containing ssDNA, the activity will lead to low efficiency or false positive outcome. Our study revealed the multi-enzymatic activity and the underlying molecular mechanism of ExoIII on ssDNA, illuminating novel insights for understanding its biological roles in DNA repair and the rational design of ExoIII-ssDNA involved diagnostics.

An exonuclease III-driven dual-mode aptasensor based on Au-Pd@Fc nanozyme and magnetic separation pretreatment for aminoglycoside antibiotics detection.

A novel dual-mode aptasensor was constructed for aminoglycoside antibiotics (AAs) detection by using a broad-spectrum aptamer as a biorecognition element, and Au-Pd@Fc functionalized by signal DNA as nanoprobes. In electrochemical mode, the target-induced cyclic amplification reaction run under the action of exonuclease-III, which increased the number of nanoprobes on the electrode surface. AAs could be quantitatively detected with LOD of 0.0355 ± 0.00613 nM. In colorimetric mode, the Au-Pd@Fc nanozyme catalyzed the color reaction of 3,3',5,5'-tetramethylbenzidine. The blue-shifted absorbance will be observed with the change of AAs concentration, and the LOD was 0.0458 ± 0.00572 nM. Furthermore, a magnetic molecular-imprinted material capable of specific adsorption of AAs was prepared on milk sample pretreatment. The aptasensor was used to detect 10 kinds of AAs in milk and the recoveries were 97.19 ± 4.41% âˆ¼ 98.70 ± 4.45% and 96.38 ± 3.53%-97.54 ± 4.13% in electrochemical and colorimetric methods. This work provided a theoretical basis for the application of aptamers in simultaneous detection of antibiotics.

Liquid and Solid Hybridization Methods to Detect RNAs.

Northern blotting (NB) has been a long-standing method for RNA detection. However, its labor-intensive nature, reliance on high-quality RNA, and use of radioactivity have diminished its appeal over time. Nevertheless, the emergence of microRNAs (miRNAs) has reignited the demand for sensitive and quantitative NB techniques. We have recently developed cost-effective and rapid protocols for RNA detection using solid and liquid hybridization (LH) techniques which exhibit high sensitivity without the need for radioactive or specialized reagents like locked nucleic acid (LNA) probes. Our assays incorporate biotinylated probes and improved techniques for probe hybridization, transfer, cross-linking, and signal enhancement. We demonstrate that while NB is sensitive in detecting mRNAs and small RNAs, our LH protocol efficiently detects these as well as miRNAs at lower amounts of RNA, achieving higher sensitivity comparable to radiolabeled probes. Compared to NB, LH offers benefits of speed, sensitivity, and specificity in detecting mRNAs, small RNAs, and miRNAs.

Ultrasensitive monitoring of PCB77 in environmental samples using a visible-driven photoelectrochemical sensing platform coupling with exonuclease I assisted in target recycling.

Due to the urgent need for detecting trace amounts of 3,3',4,4'-tetrachlorobiphenyl (PCB77) in the environment, we have developed an efficient and visible-driven photoelectrochemical (PEC) sensing platform based on carbon quantum dots (CQDs) modified titanium dioxide nanorods (TiO2 NRs), coupling with exonuclease I (Exo I) assisted in target recycling for significant signal amplification. CQDs/TiO2 NRs with high visible-light absorption ability and electron-hole separation efficiency is used as photoactive substrate for anchoring anti-PCB77 aptamer and its complementary DNA (cDNA). With the addition of PCB77, the specific interaction between PCB77 and its aptamer forces aptamer to separate from the electrode surface, resulting in an increase in photocurrent density. Adding Exo I in the test system, a self-catalytic target cycle was motivated, which significantly increased the PEC signal by more than twice, achieving signal amplification. The relationship between the photocurrent density changes and the concentrations of PCB77 are utilized to achieve quantitative detection of PCB77. The designed PEC sensing platform has good analytical performance with a detection limit as low as 0.33 pg L-1, high selectivity and stability. Moreover, the PEC sensor is successfully used to evaluate the content of PBC77 in the environment samples. The established sensing platform provides a simple and efficient method for detecting trace amounts of PCB77 in the environment.

A highly sensitive fluorescence biosensor for aflatoxins B1 detection based on polydiacetylene liposomes combined with exonuclease III-assisted recycling amplification.

A fluorescence biosensor for determination of aflatoxin B1 (AFB1) based on polydiacetylene (PDA) liposomes and exonuclease III (EXO III)-assisted recycling amplification was developed. The AFB1 aptamer partially hybridizes with complementary DNA (cDNA), which is released upon recognition of AFB1 by the aptamer. Subsequently, the cDNA hybridizes with hairpin H to form double-stranded DNA that undergoes digestion by EXO III, resulting in the cyclic release of cDNA and generation of capture DNA for further reaction. The capture DNA then hybridizes with probe modified on PDA liposomes, leading to aggregation of liposomes and subsequent fluorescence production. This strategy exhibited a limit of detection of 0.18 ng/mL within the linear range 1-100 ng/mL with a determination coefficient > 0.99. The recovery ranged from 92.81 to 106.45%, with relative standard deviations (RSD) between 1.73 and 4.26%, for corn, brown rice, peanut butter, and wheat samples. The stability, accuracy, and specificity of the method demonstrated the applicability for real sample analysis.

An Exo III-powered closed-loop DNA circuit architecture for biosensing/imaging.

With their regulated Boolean logic operations in vitro and in vivo, DNA logic circuits have shown great promise for target recognition and disease diagnosis. However, significant obstacles must be overcome to improve their operational efficiency and broaden their range of applications. In this study, we propose an Exo III-powered closed-loop DNA circuit (ECDC) architecture that integrates four highly efficient AND logic gates. The ECDC utilizes Exo III as the sole enzyme-activated actuator, simplifying the circuit design and ensuring optimal performance. Moreover, the use of Exo III enables a self-feedback (autocatalytic) mechanism in the dynamic switching between AND logic gates within this circulating logic circuit. After validating the signal flow and examining the impact of each AND logic gate on the regulation of the circuit, we demonstrate the intelligent determination of miR-21 using the carefully designed ECDC architecture in vitro. The proposed ECDC exhibits a linear detection range for miR-21 from 0 to 300 nM, with a limit of detection (LOD) of approximately 0.01 nM, surpassing most reported methods. It also shows excellent selectivity for miR-21 detection and holds potential for identifying and imaging live cancer cells. This study presents a practical and efficient strategy for monitoring various nucleic acid-based biomarkers in vitro and in vivo through specific sequence modifications, offering significant potential for early cancer diagnosis, bioanalysis, and prognostic clinical applications.

Characterization of organelle DNA degradation mediated by DPD1 exonuclease in the rice genome-edited line.

Mitochondria and plastids, originated as ancestral endosymbiotic bacteria, contain their own DNA sequences. These organelle DNAs (orgDNAs) are, despite the limited genetic information they contain, an indispensable part of the genetic systems but exist as multiple copies, making up a substantial amount of total cellular DNA. Given this abundance, orgDNA is known to undergo tissue-specific degradation in plants. Previous studies have shown that the exonuclease DPD1, conserved among seed plants, degrades orgDNAs during pollen maturation and leaf senescence in Arabidopsis. However, tissue-specific orgDNA degradation was shown to differ among species. To extend our knowledge, we characterized DPD1 in rice in this study. We created a genome-edited (GE) mutant in which OsDPD1 and OsDPD1-like were inactivated. Characterization of this GE plant demonstrated that DPD1 was involved in pollen orgDNA degradation, whereas it had no significant effect on orgDNA degradation during leaf senescence. Comparison of transcriptomes from wild-type and GE plants with different phosphate supply levels indicated that orgDNA had little impact on the phosphate starvation response, but instead had a global impact in plant growth. In fact, the GE plant showed lower fitness with reduced grain filling rate and grain weight in natural light conditions. Taken together, the presented data reinforce the important physiological roles of orgDNA degradation mediated by DPD1.

Three prime repair exonuclease 1 preferentially degrades the integration-incompetent HIV-1 DNA through favorable kinetics, thermodynamic, structural, and conformational properties.

HIV-1 integration into the human genome is dependent on 3'-processing of the viral DNA. Recently, we reported that the cellular Three Prime Repair Exonuclease 1 (TREX1) enhances HIV-1 integration by degrading the unprocessed viral DNA, while the integration-competent 3'-processed DNA remained resistant. Here, we describe the mechanism by which the 3'-processed HIV-1 DNA resists TREX1-mediated degradation. Our kinetic studies revealed that the rate of cleavage (kcat) of the 3'-processed DNA was significantly lower (approximately 2-2.5-fold) than the unprocessed HIV-1 DNA by TREX1. The kcat values of human TREX1 for the processed U5 and U3 DNA substrates were 3.8 s-1 and 4.5 s-1, respectively. In contrast, the unprocessed U5 and U3 substrates were cleaved at 10.2 s-1 and 9.8 s-1, respectively. The efficiency of degradation (kcat/Km) of the 3'-processed DNA (U5-70.2 and U3-28.05 pM-1s-1) was also significantly lower than the unprocessed DNA (U5-103.1 and U3-65.3 pM-1s-1). Furthermore, the binding affinity (Kd) of TREX1 was markedly lower (∼2-fold) for the 3'-processed DNA than the unprocessed DNA. Molecular docking and dynamics studies revealed distinct conformational binding modes of TREX1 with the 3'-processed and unprocessed HIV-1 DNA. Particularly, the unprocessed DNA was favorably positioned in the active site with polar interactions with the catalytic residues of TREX1. Additionally, a stable complex was formed between TREX1 and the unprocessed DNA compared the 3'-processed DNA. These results pinpoint the mechanism by which TREX1 preferentially degrades the integration-incompetent HIV-1 DNA and reveal the unique structural and conformational properties of the integration-competent 3'-processed HIV-1 DNA.

Fluorescent aptasensors for sensitive detection of lead ions based on structure-switching DNA beacon probe and exonuclease I-mediated signal amplification.

Herein, two simple fluorescent signal-on sensing strategies for detecting lead ions (Pb2+) were established based on structure-switching aptamer probes and exonuclease-assisted signal amplification strategies. Two hairpin-structure fluorescent probes with blunt-ended stem arms were designed by extending the base sequence of Pb2+ aptamer (PS2.M) and labelling the probes with FAM (in probe 1) and 2-aminopurine (2-AP) (in probe 2), respectively. In method 1, graphene oxide (GO) was added to adsorb probe 1 and quench the fluorescence emission of FAM to achieve low fluorescent background. In method 2, fluorescent 2-AP molecule inserted into the double-stranded DNA of probe 2 was quenched as a result of base stacking interactions, leading to a simplified, quencher-free approach. The addition of Pb2+ can induce the probes to transform into G-quadruplex structures, exposing single DNA strands at the 3' end (the extended sequences). This exposure enables the activation of exonuclease I (Exo I) on the probes, leading to the cleavage effect and subsequent release of free bases and fluorophores, thereby resulting in amplified fluorescence signals. The two proposed methods exhibit good specificity and sensitivity, with detection limits of 0.327 nM and 0.049 nM Pb2+ for method 1 and method 2, respectively, and have been successfully applied to detect Pb2+ in river water and fish samples. Both detection methods employ the structure-switching aptamer probes and can be completed in two or three steps without the need for complex analytical instruments. Therefore, they have a broad prospect in the sensitive and simple detection of lead ion contamination in food and environmental samples.