Spectroscopic characterization and pharmacokinetic evaluation of amorphous solid dispersions of glibenclamide for bioavailability enhancement in Wistar rats.

Oral bioavailability of glibenclamide (Glb) was appreciably improved by the formation of an amorphous solid dispersion with Poloxamer-188 (P-188). Poloxamer-188 substantially enhanced the solubility and thereby the dissolution rate of the biopharmaceutics classification system (BCS) class II drug Glb and simultaneously exhibited a better stabilizing effect of the amorphous solid dispersion prepared by the solvent evaporation method. The physical state of the dispersed Glb in the polymeric matrix was characterized by differential scanning calorimetry, X-ray diffraction, scanning electron microscope and Fourier transform infrared studies. In vitro drug release in buffer (pH 7.2) revealed that the amorphous solid dispersion at a Glb-P-188 ratio of 1:6 (SDE4) improved the dissolution of Glb by 90% within 3 h. A pharmacokinetic study of the solid dispersion formulation SDE4 in Wistar rats showed that the oral bioavailability of the drug was greatly increased as compared with the market tablet formulation, Daonil®. The formulation SDE4 resulted in an AUC0-24h ~2-fold higher. The SDE4 formulation was found to be stable during the study period of 6 months.

Porphyrin Aluminum Metal-Organic Framework in Liquid Water, its Interaction with the Oxidized Organosulfur Compound Diethyl Sulfoxide, and its Sorption from Aqueous Solution.

Oxidized organosulfur compounds and, in particular, sulfoxides are of interest as solvents in the semiconductor and pharmaceutical industry, environmental contaminants, and simulants in deactivation of chemical warfare agents. An experimental study is reported of the interaction of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (Compound 2) with diethyl sulfoxide (DESO) in pure form and in aqueous solution. First, the suitability of Compound 2 as sorbent in aqueous solution was assessed; namely, its long-term stability (up to 15 days) in liquid water has been investigated at room temperature and under stirring. Here, a novel facile spectroscopic method has been used, a periodic micro-sampling of sorbent from suspension, followed by vacuum mini-filtration and an ex situ time-dependent attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) analysis. Next, the interaction of Compound 2 with pure liquid DESO under ambient conditions was investigated, which yields the stoichiometric adsorption complex (Al-MOF-TCPPH2)1(DESO)2 denoted Compound 3. In this adsorption complex, molecules of DESO interact with the OH group and carboxylate group of the sorbent. Then, the removal of DESO from Compound 3 was assessed, using facile treatment with warm water in the micro Soxhlet apparatus followed by the ATR FT-IR analysis. Finally, Compound 2 was tested in sorption of DESO from diluted aqueous solution. In the initial step, the sorption proceeds very quickly (in <1 min the concentration of DESO decreases by about 20%) followed by a much slower step. The maximum amount of adsorbed DESO corresponds to half of the amount adsorbed from pure DESO as found by the high-performance liquid chromatography-ultraviolet detection method. This adsorbed amount corresponds to 1 mol DESO adsorbate per mol of sorbent. Porphyrin aluminum metal-organic framework Compound 2 is promising for the removal of DESO from diluted aqueous solution, and it is of interest for the removal of similar oxidized organosulfur compounds.

A Simple Doublet Lens Design for Mid-Infrared Imaging.

Wide-field mid-infrared (MIR) hyperspectral imaging offers a promising approach for studying heterogeneous chemical systems due to its ability to independently characterize the molecular properties of different regions of a sample. However, applications of wide-field MIR microscopy are limited to spatial resolutions no better than ∼1 µm. While methods exist to overcome the classical diffraction limit of ∼λ/2, chromatic aberration from transmissive imaging reduces the achievable resolution. Here we describe the design and implementation of a simple MIR achromatic lens combination that we believe will aid in the development of resolution-enhanced wide-field MIR hyperspectral optical and chemical absorption imaging. We also examine the use of this doublet lens to image through polystyrene microspheres, an emerging and simple means for enhancing spatial resolution.

Nanometric determination of the thickness of aqueous samples for accurate molar absorption coefficients of water-soluble molecules in the mid-infrared region.

Absorption spectra of aqueous samples measured by transmission need to be acquired using very thin cells (5-50 µm) when targeting the mid-infrared (mid-IR) region due to the strong background absorbance of liquid water. The thickness of the cell used controls the pathlength of the light through the sample, a value needed to transform absorption spectra into molar absorption coefficient spectra, or to determine solute concentrations from absorption spectra. The most accurate way to determine the thickness of an empty cell (i.e., filled with air) is from the period of an interference pattern, known as interference fringes, that arises when the cell is placed perpendicular to the path of light in the spectrometer. However, this same approach is not directly applicable to determine the thickness of a cell filled with an aqueous solution, due partially to the smaller amplitude of the interference fringes but fundamentally caused by its complex waveform, with a wavenumber-dependent oscillation period. Here, using Fresnel equations, we derived analytical expressions to model interference fringes in absorption spectra obtained by transmission, which are also valid for aqueous samples. We also present a novel Fourier-based analysis of the interference fringes that, in combination with the derived analytical expressions, allowed us to determine the pathlength of aqueous samples with an error below âˆ¼ 50 nm. We implemented this novel approach to analyze interference fringes as a Live Script running in the software Matlab. As an application, we measured the absorption spectra of a 97 mM solution of MES buffer at pH 3.4 and pH 8.4 using cells of various nominal thicknesses (6, 25 and 50 µm), whose actual thicknesses were determined using the present approach. The derived molar absorption coefficient spectrum for both the acidic and basic forms of MES were virtually identical regardless of the cell, indicating that the determined thicknesses were likely very accurate. These results illustrate the utility of the present methodology in obtaining accurate molar absorption coefficient spectra of water-soluble molecules in the mid-IR region.

Towards a natural treatment for mania: red onion husk extract modulates neuronal resilience, redox signalling, and glial activation.

BACKGROUND: Red onion husk, a readily available agricultural waste material, contains diverse bioactive compounds with potential health benefits. This study aimed to assess the safety and therapeutic potential of red onion husk extract in managing manic-like symptoms and associated neurochemical dysfunctions. METHODS: Acute and repeated oral dose studies were conducted in mice and rats to evaluate the safety profile of the extract. FT-IR analysis identified functional groups in the extract, while GC-MS analysis identified specific bioactive compounds in the flavonoid-rich fraction. A ketamine-induced manic behaviour model in Wistar rats was employed to assess the extract's efficacy in attenuating manic-like symptoms. Behavioural and neurochemical analyses were performed to further investigate the extract's effects. RESULTS: The extract demonstrated a favourable safety profile in both acute and repeated dose studies. FT-IR analysis revealed a complex mixture of organic compounds, including hydroxyl groups, alkynes/nitriles, aromatic and non-aromatic C = C bonds, amines, and polysaccharides. GC-MS analysis identified 17 bioactive compounds, including five-methyl-2-phenylindolizine, methadone N-oxide, and 3-phenylthiane, S-oxide. Ketamine administration significantly increased oxidative stress markers, TBARS, and suppressed antioxidant enzyme activities (SOD, GPx, CAT) in both the cerebral cortex and hippocampus, alongside elevated acetylcholinesterase (AchE) activity, indicating enhanced neuronal excitability. Pre-treatment with FRF (25 mg/kg) effectively mitigated ketamine-induced oxidative stress, as evidenced by reduced TBARS levels and partially restored SOD and GPx activities. Interestingly, FRF significantly increased CAT activity (p < 0.001), potentially suggesting an additional compensatory mechanism. Notably, FRF pre-treatment also counteracted ketamine-upregulated AchE activity, offering neuroprotection against heightened neuronal excitability. CONCLUSION: Red onion husk extract exhibits a favourable safety profile and exerts potent antioxidant and neuroprotective effects, possibly through modulating Nrf2 signalling pathways. Its ability to counteract ketamine-induced oxidative stress and neuronal hyperactivity highlights its potential as a complementary therapeutic strategy for managing manic episodes in bipolar disorder. Further research is warranted to elucidate the precise molecular mechanisms underlying FRF's action and explore its clinical efficacy in human studies.

Analysis of unknown (unlabeled/mislabeled) drug products for active pharmaceutical ingredients and related substances by an international mail facility satellite laboratory equipped with rapid screening devices.

Two chemists employed a three-device rapid screening "toolkit" consisting of a handheld Raman spectrometer, transportable mass spectrometer, and portable Fourier transform infrared (FT-IR) spectrometer at an international mail facility (IMF) satellite laboratory to examine unknown (unlabeled/mislabeled) products for the presence of active pharmaceutical ingredients (APIs). Phase I of this project previously demonstrated that this toolkit was the most effective collection of instruments for identifying APIs in product types collected at IMFs during a nationwide mail blitz and Phase II of this project previously demonstrated that results generated using the toolkit during a satellite laboratory pilot program were as reliable as those generated by a full-service library when two or more of these instruments identify an API. This study (Phase III) described the results of the satellite laboratory toolkit during production mode and encompassed the period ranging from June 2021 through December 2022. During this study, a total of 858 products were examined on-site at the IMF. The satellite laboratory yielded conclusive results for 726 (84.6%) products, which were used to support regulatory action, and identified 132 (15.4%) products that required additional full-service laboratory analyses due to inconclusive results. The satellite and full-service laboratory verified/confirmed at least one API/related substance in 617 (71.9%) products. A total of 709 APIs/related substances were found in the 617 products, and 202 of these 709 compounds were unique/different. Overall, during Phases I through III of this program, 350 different substances have been identified in products collected at IMFs.

Vibrational spectroscopic detection of radiation-induced structural changes in Chironomus hemoglobin.

Purpose: Chironomus hemoglobin is known to exhibit higher gamma radiation resistance compared to human hemoglobin. In the present study, we have introduced a sensitive method to analyze radiation-induced alterations in Chironomus hemoglobin using Vibrational spectroscopy and further highlighting its potential for monitoring radiotoxicity in aquatic environments. Materials and methods: Vibrational spectroscopic methods such as Raman and FT-IR spectroscopy were used to capture the distinctive chemical signature of Chironomus hemoglobin (ChHb) under both in vitro and in vivo conditions. Any radiation dose-dependent shifts could be analyzed Human hemoglobin (HuHb) as standard reference. Results: Distinctive Raman peak detected at 930 cm-1 in (ChHb) was attributed to C-N stretching in the heterocyclic ring surrounding the iron atom, preventing heme degradation even after exposure to 2400 Gy dose. In contrast, for (HuHb), the transition from deoxy-hemoglobin to met-hemoglobin at 1210 cm-1 indicated a disruption in oxygen binding after exposure to 1200 Gy dose. Furthermore, while ChHb exhibited a consistent peak at 1652 cm-1 in FT-IR analysis, HuHb on the other hand, suffered damage after gamma irradiation. Conclusion: The findings suggest that vibrational spectroscopic methods hold significant potential as a sensitive tool for detecting radiation-induced molecular alterations and damages. Chironomus hemoglobin, with its robust interaction of the pyrrole ring with Fe, serves as a reliable bioindicator molecule to detect radiation damage using vibrational spectroscopic method.

N-doped TiO2/rGO: synthesis, structure, optical characteristics, and humidity sensing applications.

In the current study, the effect of rGO ratio on the N-dopped TiO2has been synthesized through sol-gel method. The prepared N-doped TiO2/rGO composites were examined for humidity sensing applications. The relationship between optical properties and the humidity sensing properties was studied. The structure, morphology, and bonding interaction have been examined using XRD, FT-IR, PL and HRTEM respectively. The average particle size as estimated from XRD and HRTEM was found to be about 9 nm. The optical properties have been studied using UV/ Vis. Spectroscopy. Further, optical parameters including refractive index and optical band gap energy have been estimated. The humidity sensing behavior of the resultant composites were evaluated in a wide range of humidity (7%-97% RH) at different testing frequencies. The optical band gap was found to be decreased as the amount of rGO increase. Among all prepared samples, both the optical parameters and humidity sensing experiments confirmed that the 0.5% rGO@N-dopped TiO2sample is the best candidate for the humidity sensing applications. The best optimum testing frequency was demonstrated to be 50 Hz. The sensor demonstrates a fast response and recovery times of 13 s and 33 s with low hysteresis and large sensitivity. The humidity sensing mechanism was studied using complex impedance spectroscopy at different RH levels under testing frequency range from 50 Hz to 5 MHz and testing voltage of 1 VAC. The produced structure demonstrated a promising material for humidity measuring devices.

Structural study of strontium-containing iron-phosphate glasses for radioactive waste vitrification.

Iron-phosphate glasses are a wide group of materials with a wide range of applications. Among others, they are promising materials in toxic waste vitrification because of their high chemical durability and relatively low processing temperature and time. They are a novel group of glasses that are considered in the vitrification of radioactive waste, especially those that cannot be treated using conventional borosilicate ones. Since strontium isotopes are one of the main fission products present in the waste, the influence of Sr on the structural properties of the glasses is an important factor. Strontium-containing iron-phosphate glasses were subjected to structural studies using FT-IR and Raman spectroscopies. The obtained spectra were described, and appropriate band assignments were done. Based on the research conducted, the structural features of the phosphate network and their changes were determined. The results obtained showed that strontium in relatively low content up to 20 mol% acts as the glass network charge compensator and can stabilize the network. Above this threshold, SrO can be treated as a pure modifier, leading to gradual depolymerization. Thus, this point may be treated as the maximum waste loading for effective strontium immobilization.

GC-MS analysis and anti-oxidant activity of bioactive compounds of Simarouba glauca leaf extracts.

The aim of this study is to analyse the phytochemical composition, anti-oxidant activity, FT-IR and GC-MS analysis of Simarouba glauca leaf extracts. The chloroform extract exhibited highest T.P.C. (139.82 ± 0.06 mg/g GAE) and highest T.F.C. (41.95 ± 0.50 mg/g QE). The GC-MS analysis confirmed the presence of ten compounds in acetone extract and twenty-two compounds in methanol extract. The GC-MS analysis of acetone fraction showed the major peaks such as Glycerine (13.20%), 1,1,1-trichloro-2-methyl-2-propanol (8.92%), Cyclohexanol,2-methyl-5-(1-methylethenyl)- (6.09%), Tetradecane, 2,6,10-trimethyl (7.68%) and Phytol (7.53%). Some of these compounds exhibit anti-oxidant activities. GC-MS analysis of methanol fraction exhibited the presence of following compounds: Undecane (8.52%), 2,3-Trimethylene-4-pyrone (1.79%), cis-Sinapyl alcohol (2.33%) and Umckalin (1.19%). The acetone and methanol fractions exhibited higher percentage of inhibition in DPPH assay. The overall results of this study indicate that the acetone and methanol fractions have been demonstrated to be efficacious against various diseases.

Bacterial discrimination by Fourier transform infrared spectroscopy, MALDI-mass spectrometry and whole-genome sequencing.

Aim: Proof-of-concept study, highlighting the clinical diagnostic ability of FT-IR compared with MALDI-TOF MS, combined with WGS. Materials & methods: 104 pathogenic isolates of Neisseria meningitidis, Streptococcus pneumoniae, Streptococcus pyogenes and Staphylococcus aureus were analyzed. Results: Overall prediction accuracy was 99.6% in FT-IR and 95.8% in MALDI-TOF-MS. Analysis of N. meningitidis serogroups was superior in FT-IR compared with MALDI-TOF-MS. Phylogenetic relationship of S. pyogenes was similar by FT-IR and WGS, but not S. aureus or S. pneumoniae. Clinical severity was associated with the zinc ABC transporter and DNA repair genes in S. pneumoniae and cell wall proteins (biofilm formation, antibiotic and complement permeability) in S. aureus via WGS. Conclusion: FT-IR warrants further clinical evaluation as a promising diagnostic tool.

We tested a technique (FT-IR) to identify four different, common bacteria from 104 children with serious infections and compared it to lab methods for diagnosis. FT-IR was more accurate. We tested if it could identify subtypes of bacteria, which is important in outbreaks. It was able to subtype two species, but not the two other species. However, it is a much faster and cheaper technique than the gold standard. It may be useful in certain outbreaks. We also investigated the trends between genes and the length of hospital stay. This can support further laboratory research. As a fast, low-cost test, FT-IR warrants further testing before it is applied to clinical labs.

Antioxidant activity and Inhibitory effects of Cydonia oblonga Miller. leaves extracts against calcium oxalate stones.

Urinary stone disease is a widespread health problem in both adults and children, and its prevalence has been increasing worldwide. Various plants preparations have already been used since ancient times in order to treat urolithiasis. The aim of this study is to evaluate the antioxidant capacity and litholytic effect on kidney stones of Cydonia oblonga Miller. leaves. The infusion, methanol and acetone extracts were made from Cydonia oblonga Miller. leaf at different concentration. Estimation of mass fractions of total polyphenol, flavonoid, and flavonol contents, as well as the in vitro radical scavenging potential on 2,2'-diphenyl-1-picrylhydrazyl radical (DPPH·) of the investigated extracts was carried out using colorimetric methods. The litholytic property of the extracts was performed by an in-vitro model using experimentally prepared kidney stones- calcium oxalate. As results, the quince leaf extracts revealed stronger antioxidant properties in the DPPH assay, which was proved by the semi-maximal inhibitory concentration values, being about 36.06 ± 3.55, 74.15 ± 6.29, and 142.35 ± 5.09 µg/ml for methanol, acetone and infusion extracts respectively. Furthermore, the tested extracts were found to be more effective in dissolving calcium oxalate stones compared to the control solutions, the mass loss is about 15.13 ± 1.10% with methanol extract, while it is 14.77 ± 1.74% and 11.14 ± 2.86% for acetone and infusion extracts respectively. These findings confirm the quince leaf's richness in phyto-components, offering anti-oxidant property and being able to be used as a remedy for the management of kidney stones by dissolving calcium oxalate stones in the kidneys.

Zn Single-Atom Catalysts Enable the Catalytic Transfer Hydrogenation of α,ß-Unsaturated Aldehydes.

Highly active nonprecious-metal single-atom catalysts (SACs) toward catalytic transfer hydrogenation (CTH) of α,ß-unsaturated aldehydes are of great significance but still are deficient. Herein, we report that Zn-N-C SACs containing Zn-N3 moieties can catalyze the conversion of cinnamaldehyde to cinnamyl alcohol with a conversion of 95.5% and selectivity of 95.4% under a mild temperature and atmospheric pressure, which is the first case of Zn-species-based heterogeneous catalysts for the CTH reaction. Isotopic labeling, in situ FT-IR spectroscopy, and DFT calculations indicate that reactants, coabsorbed at the Zn sites, proceed CTH via a "Meerwein-Ponndorf-Verley" mechanism. DFT calculations also reveal that the high activity over Zn-N3 moieties stems from the suitable adsorption energy and favorable reaction energy of the rate-determining step at the Zn active sites. Our findings demonstrate that Zn-N-C SACs hold extraordinary activity toward CTH reactions and thus provide a promising approach to explore the advanced SACs for high-value-added chemicals.

Supercritical CO2 Treatment to Modify Techno-Functional Properties of Proteins Extracted from Tomato Seeds.

Tomato seeds are a rich source of protein that can be utilized for various industrial food purposes. This study delves into the effects of using supercritical CO2 (scCO2) on the structure and techno-functional properties of proteins extracted from defatted tomato seeds. The defatted meal was obtained using hexane (TSMH) and scCO2 (TSMC), and proteins were extracted using water (PEWH and PEWC) and saline solution (PESH and PESC). The results showed that scCO2 treatment significantly improved the techno-functional properties of protein extracts, such as oil-holding capacity and foaming capacity (especially for PEWC). Moreover, emulsifying capacity and stability were enhanced for PEWC and PESC, ranging between 4.8 and 46.7% and 11.3 and 96.3%, respectively. This was made possible by the changes in helix structure content induced by scCO2 treatment, which increased for PEWC (5.2%) and decreased for PESC (8.0%). Additionally, 2D electrophoresis revealed that scCO2 hydrolyzed alkaline proteins in the extracts. These findings demonstrate the potential of scCO2 treatment in producing modified proteins for food applications.

Modulation of bacterial membranes and cellular macromolecules by dimethyl sulfoxide: A dose-dependent study providing novel insights.

Using Escherichia coli as a model, this manuscript delves into the intricate interactions between dimethyl sulfoxide (DMSO) and membranes, cellular macromolecules, and the effects on various aspects of bacterial physiology. Given DMSO's wide-ranging use as a solvent in microbiology, we investigate the impacts of both non-growth inhibitory (1.0 % and 2.5 % v/v) and slightly growth-inhibitory (5.0 % v/v) concentrations of DMSO. The results demonstrate that DMSO causes alterations in bacterial membrane potential, influences the electrochemical characteristics of the cell surface, and exerts substantial effects on the composition and structure of cellular biomolecules. Genome-wide gene expression data from DMSO-treated E. coli was used to further investigate and bolster the results. The findings of this study provide valuable insights into the complex relationship between DMSO and biological systems, with potential implications in drug delivery and cellular manipulation. However, it is essential to exercise caution when utilizing DMSO to enhance the solubility and delivery of bioactive compounds, as even at low concentrations, DMSO exerts non-inert effects on cellular macromolecules and processes.

Exploring nonlinear optical properties in a hybrid dihydrogen phosphate system: an experimental and theoretical approach.

CONTEXT: The controlled slow evaporation process conducted at room temperature has produced a novel hybrid material denoted as (2-hydroxyethyl) trimethylammonium dihydrogen phosphate [2-HDETDHP] (C5H14NO+, H2PO4-), synthesized through the solution growth method. X-ray crystallography analysis reveals a triclinic structure with a filling rate of P and a Z value of 2. This hybrid material displays noteworthy absorption characteristics in the middle and far ultraviolet regions. UV-visible spectroscopy further establishes its transparency in the visible and near-visible ultraviolet domains. FT-IR spectroscopy examines various vibration modes, elucidating their relationships with the functional groups within the structure. Two- and three-dimensional fingerprint maps, coupled with three-dimensional crystal structures through Hirshfeld Surface Analysis, unveil the dominance of O•••H and H•••H interactions in the structure, comprising 49.40% and 50.40%, respectively. Fingerprint plots derived from the Hirshfeld surface assess the percentages of hydrogen bonding interactions, with 80.6% attributed to a fragment patch. The experiment of antimicrobial efficacy of a synthesized product, conducted in triplicate, demonstrated the synthesized product's potential antimicrobial activity. METHODS: Hirshfeld surfaces are employed to investigate intermolecular hydrogen bonding, specifically within single phosphate groups. The molecular structure of 2-HDETDHP was refined using single-crystal X-ray analysis, while its optical characteristics were examined through UV-visible spectroscopy. FT-IR spectroscopy is employed for the assignment of molecular vibrations of functional groups in the affined structure. Quantum calculations were executed with the GAUSSIAN 09 software package at B3LYP/6-311G level of theory, to optimize the molecular geometries. The antimicrobial efficacy of a synthesized product was evaluated using the disc diffusion method against antibiotic-resistant Candida albicans, Candida tropicalis, Aspergillus niger, Staphylococcus aureus, and Escherichia coli. Microorganisms were cultured on nutrient agar, and inhibition zones were measured after incubation, with streptomycin and amphotericin as positive controls.

Long-term fertilization and manuring effects on the nexus between sulphur distribution and SOC in an Inceptisol over five decades under a finger millet-maize cropping system.

Our investigation revealed that alterations in sulphur (S) pools are predominantly governed by soil organic carbon (SOC), soil nitrogen (N), microbial biomass, and soil enzyme activities in sandy clay loam (Vertic Ustropept) soil. We employed ten sets of nutrient management techniques, ranging from suboptimal (50% RDF) to super-optimal doses (150% RDF), including NPK + Zn, NP, N alone, S-free NPK fertilizers, NPK + FYM, and control treatments, to examine the interrelation of S with SOC characteristics. Fourier-transform infrared (FT-IR) spectroscopy was utilized to analyze the functional groups present in SOC characterization across four treatments: 100% NPK, 150% NPK, NPK + FYM, and absolute control plots. Principal component analysis (PCA) was then applied to assess 29 minimal datasets, aiming to pinpoint specific soil characteristics influencing S transformation. In an Inceptisol, the application of fertilizers (100% RDF) in conjunction with 10 t ha-1 of FYM resulted in an increase of S pools from the surface to the subsurface stratum (OS > HSS > SO42--S > WSS), along with an increase in soil N and SOC. FT-IR spectroscopy identified cellulose and thiocyanate functional groups in all four plots, with a pronounced presence of carbohydrate-protein polyphenol, sulfoxide (S=O), and nitrate groups specifically observed in the INM plot. The PCA findings indicated that the primary factors influencing soil quality and crop productivity (r2 of 0.69) are SOC, SMBC, SMBN, SMBS, and the enzyme activity of URE, DHA, and AS. According to the study, the combined application of fertilizer and FYM (10 t ha-1) together exert a positive impact on sulphur transformation, SOC accumulation, and maize yield in sandy clay loam soil.

An Evaluation of the Physicochemical Properties of Sesame Paste Produced by Ball Milling Compared against Conventional Colloid Milling.

The physicochemical characteristics and general food quality were greatly impacted by milling. In order to investigate the effect of milling technique for physicochemical properties of sesame paste of sesame paste, samples were prepared using ball mill and colloid mill by varying grinding times. The samples prepared by ball milling had the higher moisture contents (0.07% - 0.14%) than colloid milling (p < 0.05), except for colloid milling for one cycle (0.11%). The particle size curves showed the multimodal distributions. Compared to colloid milled samples, ball milled samples have smaller particle sizes and more uniform particle distribution. The L* values of samples prepared by ball milling were higher than colloid milling. The ball mill produced sesame paste with a wider range of hardness and silkier texture, and the samples made by ball milling for 30 min had the highest hardness. And the hardness of both CMS and BMS showed a decreasing trend with increasing grinding time. During ball milling, high-speed cutting and collision caused breakage of disulfide bonds, and the sesame proteins were decomposed to their subunits. In conclusions, ball milling may be an alternative and promising process for the preparation of sesame paste.

Larval biomass production from the co-digestion of mushroom root waste and soybean curd residues by black soldier fly larvae (Hermetia illucens L.).

People are increasingly using black soldier fly larvae (BSFL) as a sustainable waste management solution. They are high in protein and other essential nutrients, making them an ideal food source for livestock, poultry, and fish. Prior laboratory studies with BSFL developed on pure mushroom root waste (MRW) showed poor conversion efficiency compared to a regular artificial diet. Therefore, we mixed the nutrient-rich soybean curd residues (SCR) with MRW in different ratios (M2-M5). Pure mushroom root waste (M1, MRW 100%) had the lowest survival rate (86.2%), but it increased up to 96.9% with the SCR percentage increasing. M1 had the longest developmental period (31.1 days) and the lowest BSFL weight (7.4 g). However, the addition of SCR reduced the development time to 22.0 and 21.5 days in M4 (MRW 40%, SCR 60%) and M5 (MRW 20%, SCR 80%), respectively, and improved the larval weight to 10.9 g in M4 and 11.8 g in M5. Other groups did not have as much feed conversion ratio (FCR) (8.4 for M4 and M5), bioconversion (M4 5.4%; M5 5.9%), or lipid content (M4 25.2%; M5 24.3%). These mixtures did. Compare this to M1. We observed better results, with no significant differences between the M4 and M5 groups and their parameters. In the present study, our main target was to utilize more MRW. Therefore, we preferred the M4 group in our nutritional and safety investigation and further compared it with the artificial diet (M7). The heavy metals and essential amino acids (histidine 3.6%, methionine 2.7%, and threonine 3.8%) required for human consumption compared to WHO/FAO levels showed satisfactory levels. Furthermore, fatty acids (capric acid 1.9%, palmitic acid 15.3%, oleic acid 17.3%, and arachidonic acid 0.3%) also showed higher levels in M4 than M7. The SEM images and FT-IR spectra from the residues showed that the BSFL in group M4 changed the structure of the compact fiber to crack and remove fibers, which made the co-conversion mixture better.

Non-Destructive and Non-Invasive Approaches for the Identification of Hydroxy Lead-Calcium Phosphate Solid Solutions ((PbxCa1-x)5(PO4)3OH) in Cultural Heritage Materials.

Lead-calcium phosphates are unusual compounds sometimes found in different kinds of cultural heritage objects. Structural and physicochemical properties of this family of materials, which fall into the hydroxypyromorphite-hydroxyapatite solid solution, or (PbxCa1-x)5(PO4)3OH, have received considerable attention during the last few decades for promising applications in different fields of environmental and material sciences, but their diagnostic implications in the cultural heritage context have been poorly explored. This paper aims to provide a clearer understanding of the relationship between compositional and structural properties of the peculiar series of (PbxCa1-x)5(PO4)3OH solid solutions and to determine key markers for their proper non-destructive and non-invasive identification in cultural heritage samples and objects. For this purpose, a systematic study of powders and paint mock-ups made up of commercial and in-house synthesized (PbxCa1-x)5(PO4)3OH compounds with a different Pb2+/Ca2+ ratio was carried out via a multi-technique approach based on scanning electron microscopy, synchrotron radiation-based X-ray techniques, i.e., X-ray powder diffraction and X-ray absorption near edge structure spectroscopy at the Ca K- and P K-edges, and vibrational spectroscopy methods, i.e., micro-Raman and Fourier transform infrared spectroscopy. The spectral modifications observed in the hydroxypyromorphite-hydroxyapatite solid solution series are discussed, by assessing the advantages and disadvantages of the proposed techniques and by providing reference data and optimized approaches for future non-destructive and non-invasive applications to study cultural heritage objects and samples.