Zirconium­cerium modified polyvinyl alcohol/NaCMC biocomposite film: Synthesis of films through high-speed shear assisted technique and removal fluoride from water.

A new zirconium and cerium-modified polyvinyl alcohol (PVA) sodium carboxymethyl cellulose (NaCMC) film (PVA/CMC-Zr-Ce) was synthesized thru a high-speed shear-assisted method and its adsorption for the removal of fluoride was studied, in which the NaCMC provided -COONa for ion exchange between Na and Zr-Ce, thus the loading amount of Zr-Ce on films was accordingly increased. The morphology and structure of PVA/CMC-Zr-Ce were characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). Besides, the mechanical properties, water contact angle, and swelling ratio of film were also evaluated. The addition of high-speed shear improved the dispersion of the emulsion system, and PVA/CMC-Zr-Ce film with good adsorption performance and film stability was prepared. While, it was found that the adsorption capacity could reach 67.25 mg/g and equilibrium time could reach 20 min. The adsorption mechanism of PVA/CMC-Zr-Ce revealed that ion exchange between hydroxide and fluoride, electrostatic interactions and complexation were the dominating influencing factors. Based on these findings, it can be concluded that PVA/CMC-Zr-Ce film- synthesized with high-speed shear assistance technique is a promising adsorbent for fluoride removal from water.

Prediction of arsenic and fluoride in groundwater of the North China Plain using enhanced stacking ensemble learning.

Chronic exposure to elevated geogenic arsenic (As) and fluoride (F-) concentrations in groundwater poses a significant global health risk. In regions around the world where regular groundwater quality assessments are limited, the presence of harmful levels of As and F- in shallow groundwater extracted from specific wells remains uncertain. This study utilized an enhanced stacking ensemble learning model to predict the distributions of As and F- in shallow groundwater based on 4,393 available datasets of observed concentrations and forty relevant environmental factors. The enhanced model was obtained by fusing well-suited Extreme Gradient Boosting, Random Forest, and Support Vector Machine as the base learners and a structurally simple Linear Discriminant Analysis as the meta-learner. The model precisely captured the patchy distributions of groundwater As and F- with an AUC value of 0.836 and 0.853, respectively. The findings revealed that 9.0% of the study area was characterized by a high As risk in shallow groundwater, while 21.2% was at high F- risk identified as having a high risk of fluoride contamination. About 0.2% of the study area shows elevated levels of both of them. The affected populations are estimated at approximately 7.61 million, 34.1 million, and 0.2 million, respectively. Furthermore, sedimentary environment exerted the greatest influence on distribution of groundwater As, with human activities and climate following closely behind at 29.5%, 28.1%, and 21.9%, respectively. Likewise, sedimentary environment was the primary factor affecting groundwater F- distribution, followed by hydrogeology and soil physicochemical properties, contributing 27.8%, 24.0%, and 23.3%, respectively. This study contributed to the identification of health risks associated with shallow groundwater As and F-, and provided insights into evaluating health risks in regions with limited samples.

Chemical etching of CAD-CAM glass-ceramic-based materials using fluoride solutions for bonding pretreatment.

The surface treatment of glass-ceramic-based materials, namely, lithium disilicate glass (IPS e.max CAD), feldspar porcelain (VITABLOCS Mark II), and a polymer-infiltrated ceramic network (VITA ENAMIC), using aqueous fluoride solutions and their influence on luting agent bonding were investigated. Six experimental aqueous fluoride solutions were applied to these materials, and their effects were assessed by surface topological analysis. The obtained results were compared using non-parametric statistical analyses. Ammonium hydrogen fluoride (AHF) etchant demonstrated the greatest etching effect. Subsequent experiments focused on evaluating different concentrations of the AHF etchant for the bonding pretreatment of glass-ceramic-based materials with a luting agent (PANAVIA V5). AHF, particularly at concentrations above 5 wt%, effectively roughened the surfaces of the materials and improved the bonding performance. Notably, AHF at a concentration of 30 wt% exhibited a more pronounced effect on both etching and bonding capabilities compared to hydrofluoric acid.

Fluoride exposure during puberty induces testicular impairment via ER stress-triggered apoptosis in mice.

Fluoride, a ubiquitous environmental compound, carries significant health risks at excessive levels. This study investigated the reproductive toxicity of fluoride exposure during puberty in mice, focusing on its impact on testicular development, spermatogenesis, and underlying mechanisms. The results showed that fluoride exposure during puberty impaired testicular structure, induced germ cell apoptosis, and reduced sperm counts in mice. Additionally, the SOD activity and GSH content were significantly decreased, while MDA content was significantly elevated in the NaF group. Immunohistochemistry showed an increase in the number of cells positive for GRP78, a key ER stress marker. Moreover, qRT-PCR and Western blot analyses confirmed the upregulation of both Grp78 mRNA and protein expression, as well as increased mRNA expression of other ER stress-associated genes (Grp94, chop, Atf6, Atf4, and Xbp1) and enhanced protein expression of phosphorylated PERK, IRE1α, eIF2α, JNK, XBP-1, ATF-6α, ATF-4, and CHOP. In conclusion, our findings demonstrate that fluoride exposure during puberty impairs testicular structure, induces germ cell apoptosis, and reduces sperm counts in mice. ER stress may participate in testicular cell apoptosis, and contribute to the testicular damage and decreased sperm counts induced by fluoride.

The influence of geology on the quality of groundwater for domestic use: a Kenyan review.

Kenya's population, akin to other Sub-Saharan countries, is rapidly growing. With the increasing unreliability of surface water, groundwater resources are becoming highly relied on for domestic and industrial use. Despite several known contaminants reported in different parts of the country, no study has attempted to correlate groundwater quality in the different geological provinces. This review critically synthesizes the influence of Kenya's diverse geology on groundwater quality for human consumption. This was achieved through a review of published journal articles and other research material through research and government databases. Groundwater was categorised based on the major geological provinces including the Archaean volcanic Nyanzian Craton, the Proterozoic metamorphic Mozambique Mobile Belt (MMB) and volcanic Kisii Group, the Palaeozoic and Mesozoic sediments, and Tertiary volcanic Rift Valley. Groundwater quality in these regions showed a characteristic high concentration of fluoride (F-) in volcanic aquifers of the Rift Valley and Nyazian Craton and metamorphic aquifers of the MMB, where mineral dissolution was the main process of F- release. High salinity was common in metamorphic aquifers in the MMB and the Palaeozoic and Mesozoic sedimentary aquifers where mineral dissolution and seawater intrusion were the common contributors to salinity. Other contaminants such as lead and iron were reported in localised areas in the sedimentary and metamorphic aquifers, respectively. Anthropogenic contaminants such as Escherichia coli (E. coli), NO3 -, and NO2 - were common in shallow groundwater resources in most informal settlements in urban areas. Due to the presence of health implications, of the highlighted contaminants, such as fluorosis, high blood pressure and diarrhoea (due to high F- and salinity) in affected regions, this review highlights the need for an active water resource management program in any country relying on groundwater resources to determine the presence of all region-specific potentially harmful chemical elements and mitigation measures in all its water resources.

Unlocking the Potential: Atomically Thin 2D Fluoritene from Exfoliated Fluorite Ore and Its Electrochemical Activity.

Fluorite mineral holds significant importance because of its optoelectronic properties and wide range of applications. Here, we report the successful exfoliation of bulk fluorite ore (calcium fluoride, CaF2) crystals into atomically thin two-dimensional fluoritene (2D CaF2) using a highly scalable liquid-phase exfoliation method. The microscopic and spectroscopy characterizations show the formation of (111) plane-oriented 2D CaF2 sheets with exfoliation-induced material strain due to bond breaking, leading to the changes in lattice parameter. Its potential role in electrocatalysis is further explored for deeper insight, and a probable mechanism is also discussed. The 2D CaF2 with long-term stability shows overpotential values of 670 and 770 mV vs RHE for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively, at 10 mA cm-2. Computational simulations demonstrate the unique "direct-indirect" band gap switching with odd and even numbers of layers. Current work offers new avenues for exploring the structural and electrochemical properties of 2D CaF2 and its potential applicability.

Defluorination of monofluorinated alkane by Rhodococcus sp. NJF-7 isolated from soil.

Microbial degradation of fluorinated compounds raised significant attention because of their widespread distribution and potential environmental impacts. Here, we report a bacterial isolate, Rhodococcus sp. NJF-7 capable of defluorinating monofluorinated medium-chain length alkanes. This isolate consumed 2.29 ± 0.13 mmol L- 1 of 1-fluorodecane (FD) during a 52 h incubation period, resulting in a significant release of inorganic fluoride amounting to 2.16 ± 0.03 mmol L- 1. The defluorination process was strongly affected by the initial FD concentration and pH conditions, with lower pH increasing fluoride toxicity to bacterial cells and inhibiting enzymatic defluorination activity. Stoichiometric conversion of FD to fluoride was observed at neutral pH with resting cells, while defluorination was significantly lower at reduced pH (6.5). The discovery of the metabolites decanoic acid and methyl decanoate suggests that the initial attack by monooxygenases may be responsible for the biological defluorination of FD. The findings here provide new insights into microbial defluorination processes, specifically aiding in understanding the environmental fate of organic semi-fluorinated alkane chemicals.

Study on the mechanical and aging properties of an antibacterial composite resin loaded with fluoride-doped nano-zirconia fillers.

Preventing the occurrence of secondary caries serves as one of the significant issues in dental clinic, thus make it indispensable to improving the properties of conventional composite resin (CR) by developing a novel CR. In present study, two groups of experimental CRs loaded with different contents of fluoride-doped nano-zirconia fillers (25 wt% and 50 wt%) were fabricated. The surface topography, mechanical performance, fluoride release, antibacterial effect, aging property and cytotoxicity of the experimental CRs were evaluated subsequently. A uniform distribution of the F-zirconia fillers over the whole surface of resin matrix could be observed. The experimental CRs showed continuous fluoride release within 28 days, which was positively correlated with the content of F-zirconia fillers. Moreover, the amount of fluoride release increased in the acidic buffer. Addition of F-zirconia fillers could improve the color stability, wear resistance and microhardness of the experimental CRs, without reducing the flexure strength. Furtherly, the fluoride ions released continuously from the experimental CRs resulted in effective contact and antibacterial properties, while they showed no cytotoxicity. As a consequence, considerations can be made to employ this new kind of composite resin loaded with fluoride-doped nano-zirconia fillers to meet clinical requirements when the antimicrobial benefits are desired.

Knowledge of the health personnel involved in the fluoride varnish therapy programs of primary schools in Tehran, Iran.

INTRODUCTION: The World Health Organization (WHO) places great importance on oral health promotion programs in schools, given that approximately one billion people worldwide are students. This demographic not only includes the students themselves, but also extends to school staff, their families, and the broader community, all of whom are interconnected. The objectives of this study were firstly to assess the knowledge of health personnel conducting fluoride varnish treatment (FVT) in schools, and secondly to solicit their views on the effectiveness of their training methods. METHODS: Data was collected from health personnel involved in FVT in schools, supervised by medical universities in Tehran province, using a questionnaire. The questionnaire was divided into four sections: demographic information, methods of receiving FVT training, respondents' knowledge regarding FVT, and opinions about the effectiveness of FVT training methods. The questionnaire was distributed via social media, phone conversations, and email. The collected data was analyzed using Mann-Whitney in SPSS Version 26. A regression model was also fitted to the data. RESULTS: The present study included 403 participants. Among various educational methods, it was found that participation in previous workshops (P = 0.001) and FVT workshops (P = 0.013) was significantly correlated with a higher FVT knowledge score. Additionally, participation in previous oral health promotion programs was significantly associated with a higher knowledge score (P < 0.05). Therefore, a history of participating in previous health promotion programs significantly contributed to the participants' knowledge. CONCLUSION: Participation in previous oral health programs was found to be significantly correlated with a higher knowledge score. The effectiveness of training programs can be attributed to participation in previous workshops and FVT workshops. This study provided insights into potential strategies for enhancing personnel training in national oral health programs.

An In Vitro Study to Evaluate the Antimicrobial Activity of a Zinc Citrate, Sodium Fluoride, Alum and Xylitol-Based Toothpaste Formulation.

INTRODUCTION: Periodontitis is a prevalent condition significantly affecting oral health. Comorbid conditions, such as diabetes, can heighten the severity of periodontal disease and overall oral health. Therefore, to enhance oral health and manage comorbid conditions, comprehensive periodontal care is essential. This approach could involve using toothpaste containing antimicrobial ingredients in routine oral care. This paper presents the results of an in vitro study analysing the antimicrobial properties of the test formulation containing zinc citrate, alum, sodium fluoride, and xylitol-based toothpaste (Stolin-R). These ingredients work together to help in providing comprehensive oral care by controlling growth of bacteria majorly responsible for periodontal disease and thus maintaining optimal oral hygiene. AIM: To determine the antimicrobial properties of zinc citrate, alum, sodium fluoride, and xylitol-based toothpaste formulation against key periodontal pathogens through in vitro analyses. MATERIALS AND METHODS: The antimicrobial efficacy of test formulation is evaluated through minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and time-dependent antibacterial assessment against key periodontal pathogens, including Porphyromonas gingivalis, Tannerella forsythia, Fusobacterium nucleatum, Prevotella intermedia, Streptococcus mutans, and Bacteroides fragilis. RESULTS: The test formulation demonstrated potent antimicrobial effectiveness against Bacteroides fragilis, Fusobacterium nucleatum, Porphyromonas gingivalis, Prevotella intermedia, Streptococcus mutans, and Tannerella forsythia, by exhibiting low MIC and MBC. Additionally, significant bacterial reduction, exceeding 99.99%, was observed within five minutes, emphasising its potential as an effective adjunct in combating periodontal infection. CONCLUSION: Zinc citrate, alum, sodium fluoride, and xylitol-based toothpaste formulation demonstrates significant antimicrobial activity against key periodontal pathogens, suggesting its potential as an effective agent for maintaining oral health and combating gingival infection.

Synergistic inhibition of ureolytic activity and growth of Klebsiella pneumoniae in vitro suggests cobinding of fluoride and acetohydroxamic acid at the urease active site and provides a novel strategy to combat ureolytic bacteria.

The ability of ureolytic bacteria to break down stable urea to alkaline ammonia leads to several environmental and health challenges. Ureolytic bacteria such as Helicobacter pylori, Klebsiella pneumoniae, and Proteus mirabilis can become pathogenic and cause persistent infections that can be difficult to treat. Inhibiting urease activity can reduce the growth and pathogenicity of ureolytic bacteria. In the present in vitro study, we investigated the synergistic effects of tannic acid (TA) and the urease inhibitors fluoride (F-) and acetohydroxamic acid (AHA). The concentration of AHA needed for efficient inhibition of the ureolytic activity of K. pneumoniae can be significantly reduced if AHA is coapplied with tannic acid and sodium fluoride (NaF). Thus, only 1.20 µmol l-1 AHA in combination with 0.30 mmol l-1 tannic acid and 0.60 mmol l-1 NaF delayed the onset of ureolytic pH increase by 95.8 % and increased the growth lag phase by 124.3 % relative to untreated K. pneumoniae. At these concentrations, without AHA, TA and NaF increased the onset of the ureolytic pH change by only 37.0 % and the growth lag phase by 52.5 %. The strong inhibition obtained with low concentrations of AHA in triple-compound treatments suggests cobinding of F- and AHA at the urease active site and could reduce the side effects of AHA when it is employed as a drug against e.g. urinary tract infections (UTIs) and blocked catheters. This study reports the basis for a promising novel therapeutic strategy to combat infections caused by ureolytic bacteria and the formation of urinary tract stones and crystalline biofilms on catheters.

Caries preventive potential of professionally deliverable fluoride-containing agents with incorporated arginine: A scoping review.

The scoping review objectives were to: 1) investigate the caries preventive potential of professionally deliverable fluoride (F)-containing agents with incorporated arginine (Arg); and 2) identify the future scope of research on Arg-F interventions for caries prevention. Of 150 identified records, 7 articles (6 in vitro investigations and 1 scoping review) were included for a complete review; with no clinical studies with/without appraisal. Arginine variants (L-Arg/Arg.HCl at 1% to 10% w/v.) were examined for a potential professional application aimed at caries prevention, as reported with in vitro studies. Of the included articles, four in vitro studies explored L-Arg enriched 5% NaF varnish (Duraphat®) as a promising caries preventive agent, while only one considered incorporating L-Arg in MI varnish®/nanohydroxyapatite and one investigated glass ionomer cement for primary/secondary and tertiary caries prevention. The scoping review highlighted the scope for incorporating Arg to professionally deliverable F-containing agents. No clinical data are available to make conclusive recommendations about the caries preventive potential of professionally deliverable F-containing agents with incorporated Arg. With Arg-F varnish being investigated predominantly through in vitro studies, the data so far suggest that Arg was incorporated exclusively in Duraphat®, while the potential of Arg to prevent caries in other F-containing varnishes remains unexplored.

Fluorinated benzothiadiazole fluorescent probe based on ICT mechanism for highly selectivity and sensitive detection of fluoride ion.

Excessive fluoride ion (F-) in the environment can affect health and even endanger life when ingested by the human body. However, most fluoride probes have the disadvantages of low sensitivity and long detection time. Herein, fluorescent probe 3a is successfully synthesized by linking two acetylenyltrimethylsilyl groups at both ends of the fluorinated benzothiadiazole core. After the addition of F- to 3a, the emission at 436 nm is significantly quenched and slightly blue-shifted. It is confirmed by electrospray ionization high-resolution mass spectrometry (ESI-HRMS) and density functional theory calculations (DFT) that these changes are due to the F- triggered Si-C bond cleavage and the subsequent inactivation of intramolecular charge transfer (ICT). The detection limit and response time of probe 3a for F- are 10-8 mol/L and 25 s, respectively. Importantly, fluorescent material 3a can be processed into portable test tools for the visual detection of fluoride ion.

Skeletal fluorosis: an uncommon cause, yet a rescue treatment?

PURPOSE: Skeletal fluorosis (SF) results from chronic exposure to fluoride (F-) causing excessive aberrantly mineralized brittle bone tissue, fractures, and exostoses. There is no established treatment other than avoiding the source of F-. Still, excess F- can persist in bone for decades after exposure ceases. CASE PRESENTATION: A 50-year-old woman presented with multiple, recurrent, low AQ2 trauma fractures yet high radiologic bone mineral density. Serum F- was elevated, and osteomalacia was documented by non-decalcified transiliac biopsy. She reported intermittently "huffing" a keyboard cleaner containing F- (difluoroethane) for years. Following cessation of her F- exposure, we evaluated the administration of the parathyroid hormone analog, abaloparatide, hoping to increase bone remodeling and diminish her skeletal F- burden. CONCLUSION: Due to the prolonged half-life of F- in bone, SF can cause fracturing long after F- exposure stops. Anabolic therapy approved for osteoporosis, such as abaloparatide, may induce mineralized bone turnover to replace the poorly mineralized osteomalacic bone characteristic of SF and thereby diminish fracture risk. Following abaloparatide treatment for our patient, there was a decrease in bone density as well as a reduction in F- levels.

Fluorinated hydroxyapatite conditions a favorable osteo-immune microenvironment via triggering metabolic shift from glycolysis to oxidative phosphorylation.

BACKGROUND: Biological-derived hydroxyapatite is widely used as a bone substitute for addressing bone defects, but its limited osteoconductive properties necessitate further improvement. The osteo-immunomodulatory properties hold crucial promise in maintaining bone homeostasis, and precise modulation of macrophage polarization is essential in this process. Metabolism serves as a guiding force for immunity, and fluoride modification represents a promising strategy for modulating the osteoimmunological environment by regulating immunometabolism. In this context, we synthesized fluorinated porcine hydroxyapatite (FPHA), and has demonstrated its enhanced biological properties and osteogenic capacity. However, it remains unknown whether and how FPHA affects the immune microenvironment of the bone defects. METHODS: FPHA was synthesized and its composition and structural properties were confirmed. Macrophages were cultured with FPHA extract to investigate the effects of FPHA on their polarization and the related osteo-immune microenvironment. Furthermore, total RNA of these macrophages was extracted, and RNA-seq analysis was performed to explore the underlying mechanisms associated with the observed changes in macrophages. The metabolic states were evaluated with a Seahorse analyzer. Additionally, immunohistochemical staining was performed to evaluate the macrophages response after implantation of the novel bone substitutes in critical size calvarial defects in SD rats. RESULTS: The incorporation of fluoride ions in FPHA was validated. FPHA promoted macrophage proliferation and enhanced the expression of M2 markers while suppressing the expression of M1 markers. Additionally, FPHA inhibited the expression of inflammatory factors and upregulated the expression of osteogenic factors, thereby enhancing the osteogenic differentiation capacity of the rBMSCs. RNA-seq analysis suggested that the polarization-regulating function of FPHA may be related to changes in cellular metabolism. Further experiments confirmed that FPHA enhanced mitochondrial function and promoted the metabolic shift of macrophages from glycolysis to oxidative phosphorylation. Moreover, in vivo experiments validated the above results in the calvarial defect model in SD rats. CONCLUSION: In summary, our study reveals that FPHA induces a metabolic shift in macrophages from glycolysis to oxidative phosphorylation. This shift leads to an increased tendency toward M2 polarization in macrophages, consequently creating a favorable osteo-immune microenvironment. These findings provide valuable insights into the impact of incorporating an appropriate concentration of fluoride on immunometabolism and macrophage mitochondrial function, which have important implications for the development of fluoride-modified immunometabolism-based bone regenerative biomaterials and the clinical application of FPHA or other fluoride-containing materials.

Coronary sodium [18F]fluoride activity predicts outcomes post-CABG: a comparative evaluation with conventional metrics.

PURPOSE: The value of preoperative multidisciplinary approach remains inadequately delineated in forecasting postoperative outcomes of patients undergoing coronary artery bypass grafting (CABG). Herein, we aimed to ascertain the efficacy of multi-modality cardiac imaging in predicting post-CABG cardiovascular outcomes. METHODS: Patients with triple coronary artery disease underwent cardiac sodium [18F]fluoride ([18F]NaF) positron emission tomography/computed tomography (PET/CT), coronary angiography, and CT-based coronary artery calcium scoring before CABG. The maximum coronary [18F]NaF activity (target-to-blood ratio [TBR]max) and the global coronary [18F]NaF activity (TBRglobal) was determined. The primary endpoint was perioperative myocardial infarction (PMI) within 7-day post-CABG. Secondary endpoint included major adverse cardiac and cerebrovascular events (MACCEs) and recurrent angina. RESULTS: This prospective observational study examined 101 patients for a median of 40 months (interquartile range: 19-47 months). Both TBRmax (odds ratio [OR] = 1.445; p = 0.011) and TBRglobal (OR = 1.797; P = 0.018) were significant predictors of PMI. TBRmax>3.0 (area under the curve [AUC], 0.65; sensitivity, 75.0%; specificity, 56.8%; p = 0.036) increased PMI risk by 3.661-fold, independent of external confounders. Kaplan-Meier test revealed a decrease in MACCE survival rate concomitant with an escalating TBRmax. TBRmax>3.6 (AUC, 0.70; sensitivity, 76.9%; specificity, 73.9%; p = 0.017) increased MACCEs risk by 5.520-fold. Both TBRmax (hazard ratio [HR], 1.298; p = 0.004) and TBRglobal (HR = 1.335; p = 0.011) were significantly correlated with recurrent angina. No significant associations were found between CAC and SYNTAX scores and between PMI occurrence and long-term MACCEs. CONCLUSION: Quantification of coronary microcalcification activity via [18F]NaF PET displayed a strong ability to predict early and long-term post-CABG cardiovascular outcomes, thereby outperforming conventional metrics of coronary macrocalcification burden and stenosis severity. TRIAL REGISTRATION: The trial was registered with the Chinese Clinical Trial Committee (number: ChiCTR1900022527; URL: www.chictr.org.cn/showproj.html?proj=37933 ).

Cost-effectiveness and cost-benefit analyses of fluoride varnish for caries prevention in Guangxi, China.

OBJECTIVES: The objectives of this study were to evaluate the cost-effectiveness and cost-benefit of fluoride varnish (FV) interventions for preventing caries in the first permanent molars (FPMs) among children in rural areas in Guangxi, China. METHODS: This study constituted a secondary analysis of data from a randomised controlled trial, analysed from a social perspective. A total of 1,335 children aged 6-8 years in remote rural areas of Guangxi were enrolled in this three-year follow-up controlled study. Children in the experimental group (EG) and the control group (CG) received oral health education and were provided with a toothbrush and toothpaste once every six months. Additionally, FV was applied in the EG. A decision tree model was developed, and single-factor and probabilistic sensitivity analyses were conducted. RESULTS: After three years of intervention, the prevalence of caries in the EG was 50.85%, with an average decayed, missing, and filled teeth (DMFT) index score of 1.12, and that in the CG was 59.04%, with a DMFT index score of 1.36. The total cost of caries intervention and postcaries treatment was 42,719.55 USD for the EG and 46,622.13 USD for the CG. The incremental cost-effectiveness ratio (ICER) of the EG was 25.36 USD per caries prevented, and the cost-benefit ratio (CBR) was 1.74 USD benefits per 1 USD cost. The results of the sensitivity analyses showed that the increase in the average DMFT index score was the largest variable affecting the ICER and CBR. CONCLUSIONS: Compared to oral health education alone, a comprehensive intervention combining FV application with oral health education is more cost-effective and beneficial for preventing caries in the FPMs of children living in economically disadvantaged rural areas. These findings could provide a basis for policy-making and clinical choices to improve children's oral health.

The potential advantages of 18F sodium fluoride positron emission tomography-computed tomography for clinical staging and management planning in patients with nasopharyngeal carcinoma.

Background: The staging and treatment planning of nasopharyngeal carcinoma (NPC) face challenges due to limited sensitivity of conventional imaging. 18F-sodium fluoride (18F-NaF) positron emission tomography-computed tomography (PET/CT) offers potential advantages in detecting early bone involvement. This retrospective cohort study aimed to assess the potential advantage of 18F-NaF PET/CT for clinical staging and management planning in patients with NPC and to compare 18F-NaF PET/CT findings with those of conventional imaging modalities. Methods: We enrolled a cohort of patients with NPC who underwent 18F-NaF PET/CT at our PET/CT center between July 1, 2017, and June 30, 2021, and analyzed the findings of 18F-NaF PET/CT and conventional imaging modalities. Data from multidisciplinary team discussions on clinical staging and management planning both before and after 18F-NaF PET/CT were recorded. Additionally, any changes in clinical staging and management planning following 18F-NaF PET/CT were documented. Results: A total of 58 patients were included in this study. After 18F-NaF PET/CT imaging, clinical tumor-node-metastasis (TNM) staging was observed to have changed in seven cases (12.1%). Among these, four cases had changes in T stage and three cases in the M stage. Additionally, changes in clinical management plans were observed in eight patients (13.8%). Changes due the results of 18F-NaF PET/CT included three cases with major modification (two cases switched from curative treatment to palliative treatment, and one case switched from palliative treatment to curative treatment) and five cases with minor changes. The minor changes involved alteration to the radiotherapy target volume (three cases with an increased target volume and one case with a reduced target area). Furthermore, one case required an alteration to the radiotherapy strategy for local bone involvement. Conclusions: The use of 18F-NaF PET/CT in patients newly diagnosed with NPC may offer potential advantages for clinical staging and treatment planning, enabling physicians to select a more individualized treatment approach.

Efficiency of casein phosphopeptide amorphous calcium phosphate versus topical fluorides on remineralizing early enamel carious lesions - A systematic review and meta analysis.

Objective: To assess the remineralizing efficiency of caesin phosphopepdide amorphous calcium phosphate (CPP-ACP) versus topical fluorides on early enamel lesions in vivo. Data sources: PubMed, Web of Science, Scopus, EBSCO were searched based on the PICOS criteria up to December 2022 with English language restriction. All relevant studies were subjected to two separate reviews before being included at the title, abstract, and full text levels. Study selection: 41 studies were reviewed and 11 selected for inclusion in the final sample for the review. All were randomized clinical trials with the follow-up period of the studies ranging from 3 to 12 months. Out of the 11 studies, only two are with low risk of bias on assessment with Cochrane risk of bias assessment tool, while the other nine articles were with the moderate and high risk of bias. Conclusions: Conflicting evidence exists on the clinical efficacy of CPP-ACP compared to the various fluoride forms tested, and no adverse effect associated with CPP-ACP use was discovered in comparison to fluorides that had certain detrimental health impacts. Although, the review results in favor of both fluorides and CPP-ACP with similar clinical efficiency, when ill effects are considered the CPP-ACP can be a choice of remineralizing early enamel lesions. However, before concrete suggestions can be given, high-quality, well-designed clinical research in this area are still necessary. Clinical significance: A considerable remineralizing impact has been shown in both in vitro and in vivo experiments, making CPP-ACP/CPP-ACPF a more promising remineralizing agent than fluorides. Therefore, this can be applied clinically to early enamel carious lesion.

Spatially Resolved Raman Spectroscopic Investigation of Uranyl Fluoride: A Case Study in the Importance of Instrument Optimization.

Raman spectroscopy is an emerging technique for rapid and nondestructive analysis of nuclear materials for forensic and nonproliferation applications as it is a powerful tool for distinguishing multiple chemical forms of materials with similar stoichiometries. Recent developments in spectroscopic software have enabled rapid data collection with high-speed Raman spectroscopic mapping capabilities. However, some uranium-rich materials are susceptible to degradation in humid air and/or laser-induced phase transformations. To mitigate environmental or measurement-related sample degradation of potential samples of interest, we have taken a systematic approach to define optimized data collection parameters for high-throughput measurements of uranyl fluoride (UO2F2), which is an important intermediate material in the nuclear fuel cycle. First, we systematically describe the influence of optical magnification (5× to 100×), laser power, and exposure time on obtained signal for identical particles of UO2F2 and find that at low laser power and exposure times, comparable signal is obtained regardless of optical magnification. Second, we ensure sample integrity during data collection, and third, collect spectroscopic maps that employ optimized parameters to reduce the time required to obtain spatially resolved spectroscopic information. Reductions of 90% and 99% in measurement times are discussed as they relate to differences in resolving spectroscopic features of particles in identical mapping areas. During this work, we found that additional data processing options were needed and thus developed a customized Python script for importing, processing, analyzing, and visualizing Raman spectroscopic map data.