Tuning Electronic and Structural Properties of Lead-Free Metal Halide Perovskites: A Comparative Study of 2D Ruddlesden-Popper and 3D Compositions.

In recent decades, two-dimensional (2D) perovskites have emerged as promising semiconductors for next-generation photovoltaics, showing notable advancements in solar energy conversion. Herein, we explore the impact of alternative inorganic lattice BX-based compositions (B=Ge or Sn, X=Br or I) on the energy gap and stability. Our investigation encompasses BA2Man-1BnX3n+1 2D Ruddlesden-Popper perovskites (for n=1-5 layers) and 3D bulk (MA)BX3 systems, employing first-principles calculations with spin-orbit coupling (SOC), DFT-1/2 quasiparticle, and D3 dispersion corrections. The study unveils how atoms with smaller ionic radii induce anisotropic internal and external distortions within the inorganic and organic lattices. Introducing the spacers in the low-layer regime reduces local distortions but widens band gaps. Our calculation protocol provides deeper insights into the physics and chemistry underlying 2D perovskite materials, paving the way for optimizing environmentally friendly alternatives that can efficiently replace with sustainable materials.

Composition-Property Relations for GAx FAy MA1- x - y PbI3 Perovskites.

Halide perovskites are materials for diverse optoelectronic applications owing to a combination of factors, including their compositional flexibility. A major source of this diversity of compositions comes from the use of mixed organic cations in the A-site of such compounds to form solid solutions. Many organic cations are possible for this purpose. Although significant progress is made over years of intensive research, the determination of systematic relationships between the compositions and properties of halide perovskites is not exploited accordingly. Using the MAPbI3 prototype, a wide range of compositions substituted by formamidinium (FA+ ) and guanidinium (GA+ ) cations are studied. From a detailed collection of experimental data and results reported in the literature, heat maps correlating the composition of GAx FAy MA1- x - y PbI3 solid solutions with phase transition temperatures, dielectric permittivity, and activation energies are constructed. Considering the characteristics of organic cations, namely their sizes, dipole moments, and the number of N─H bonds, it is possible to interpret the heat maps as consequences of these characteristics. This work brings a systematization of how obtaining specific properties of halide perovskites might be possible by customizing the characteristics of the A-site organic cations.

Porous 8YSZ Ceramics Prepared with Alkali Halide Sacrificial Additives.

8 mol% Y2O3-stabilized ZrO2 (8YSZ) ceramics were prepared with KCl and LiF additions to obtain porous specimens with high skeletal density. Thermogravimetric and differential thermal analyses (TG/DTA) were carried out on 8YSZ and on 8YSZ mixed to 5 wt.% KCl or 5 wt.% LiF as sacrificial pore formers that were thermally removed during sintering. The melting and evaporation of the alkali halides were evaluated by differential thermal analysis. Dilatometric analysis was also carried out following the same TG/DTA temperature profile with results suggesting rearrangement of the 8YSZ particles during LiF and KCl melting. The dilatometric data of 8YSZ green pellets mixed to KCl or LiF exhibited an initial expansion up to the melting of the alkali halide, followed by shrinkage due to sintering evolution with grain growth and pore elimination. The time that the alkali halide molten phase was kept during sintering was found to be an important parameter for obtaining 8YSZ-sintered specimens with specific pore content; bulk density and open porosity could then be tuned by controlling the time the alkali halide remained liquid during sintering. Scanning electron microscopy images of the pellet fracture surfaces showed pores that contributed to increasing the electrical resistivity as evaluated by impedance spectroscopy analysis.

How cation nature controls the bandgap and bulk Rashba splitting of halide perovskites.

Because of instability issues presented by metal halide perovskites based on methylammonium (MA), its replacement to Cs has emerged as an alternative to improve the materials' durability. However, the impact of this replacement on electronic properties, especially gap energy and bulk Rashba splitting remains unclear since electrostatic interactions from organic cations can play a crucial role. Through first-principles calculations, we investigated how organic/inorganic cations impact the electronic properties of MAPbI 3 and CsPbI 3 perovskites. Although at high temperatures the organic cation can assume spherical-like configurations due to its rotation into the cages, our results provide a complete electronic mechanism to show, from a chemical perspective based on ab initio calculations at 0 K , how the MA dipoles suppression can reduce the MAPbI 3 gap energy by promoting a degeneracy breaking in the electronic states from the PbI 3 framework, while the dipole moment reinforcement is crucial to align theory ↔ experiment, increasing the bulk Rashba splitting through higher Pb off-centering motifs. The lack of permanent dipole moment in Cs results in CsPbI 3 polymorphs with a pronounced Pb on-centering-like feature, which causes suppression in their respective bulk Rashba effect.

Lead-Free Metal Halide Perovskite Nanocrystals: From Fundamentals to Applications.

Lead (Pb) halide perovskite nanocrystals, with the general formula APbX3 , where A=CH3 NH3+ , CH(NH2 )2+ , or Cs+ and X=Cl- , Br- , or I- , have emerged as a class of materials with promising properties due to their remarkable optical properties and solar cell performance. However, important issues still need to be addressed to enable practical applications of these materials, such as instability, mass production, and Pb toxicity. Recent studies have carried out the replacement of Pb by various less-toxic cations as Sn, Ge, Sb, and Bi. This variety of chemical compositions provide Pb-free perovskite and metal halide nanostructures with a wide spectral range, in addition to being considered less toxic, therefore having greater practical applicability. Highlighting the necessity to address and solve the toxicity problems related to Pb-containing perovskite, this review considers the prospects of the Pb-free perovskite, involving synthesis methods, and properties of them, including advantages, disadvantages, and applications.

Photosynthesis of hybrid silver-based nanoparticles mediated lectins and evaluation of their hemagglutinating properties.

Lectins are carbohydrate-binding proteins belonging to the Leguminosae family. In this family stand out proteins extracted from species belonging to Diocleinae subtribe, which includes, for example, the seed lectin from Dioclea violacea (DVL) and the jack bean lectin Concanavalin A (ConA). Here, we report the photosynthesis of silver/silver chloride nanoparticles (NPs) assisted by ConA and DVL. The syntheses were simple processes using a green-chemistry approach. Under electron microscopy, NPs heterogeneous in size, nearly spherical and covered by a thin lectin corona, were observed. Both NPs assisted by lectins were capable to cause strong rabbit erythrocytes agglutination with the same titers of hemagglutinating activities. These results indicate that both lectins maintained their biological activities even after association with the NPs and therefore are able to interact with biological membrane carbohydrates. However, for rabbit erythrocytes treated with proteolytic enzymes were observed different titers of hemagglutinating activities, suggesting differences in the spatial arrangement of the lectins on the surface of the NPs. This study provides evidences that these hybrid lectin-coated silver/silver chloride NPs can be used for selective recognition and interaction with membrane carbohydrates and others biotechnological applications.

Highly Water-Stable Polymer-Perovskite Nanocomposites.

The excellent performance of hybrid metal-halide perovskite nanocrystals (NCs) contrasts with their unsatisfactory stability in a high-humidity environment or water. Herein, polymer composite lead-halide perovskites (LHPs) NCs were prepared by casting or spin-coating to produce a high fluorescence yield and a fully water-resistant material. Poly(l-lactide) (PLla), polypropylene glycol (PPGly), and polysulfone (PSU) commercial polymers were used to prepare suspensions of MAPbBr3-HDA NCs (MA: CH3NH3; HDA: hexadecylamine). The MAPbBr3-HDA@PLla suspension exhibited a maximum fluorescence quantum yield of 93% compared to 43% for the pristine MAPbBr3-HDA NCs. Strong emissions around 528 nm were also observed, with the same full width at half maximum value of 20 nm, demonstrating the successful fabrication of brightly luminescent LHP NCs@polymer combinations. Time-resolved photoluminescence measurements directly observed the enhanced spontaneous emission of the NCs induced by the polymeric environment. However, the cast films of MAPbBr3-HDA NCs mixed with PLla or PPGly did not resist water immersion. On the contrary, MAPbBr3-HDA@PPGly/PSU films containing well-dispersed ∼10 nm LHP NCs retained a bright green fluorescence emission even after 18 months under air conditions or water immersion up to 45 °C. From water contact angle measurements, profilometry, and X-ray photoelectron spectroscopy data, it could be assumed that the slightly hydrophobic PSU polymer is responsible for the high water stability of the fluorescent films, which avoids MAPbBr3-HDA NC degradation. This work shows that the LHP NC dispersion in dissolved commodity polymers holds great promise toward the long-term stability of LHP NC composites for the future development of wearable electronic devices and other waterproof applications.

DC bias electric field effects on ac electrical conductivity of MAPbI3suggesting intrinsic changes on structure and charge carrier dynamics.

Methylammonium lead iodide (MAPbI3) emerges as a promising halide perovskite material for the next generation of solar cells due to its high efficiency and flexibility in material growth. Despite intensive studies of their optical and electronic properties in the past ten years, there are no reports on dc bias electric field effects on conductivity in a wide temperature range. In this work, we report the combined effects of frequency, temperature, and dc bias electric field on the ac conductivity of MAPbI3. We found that the results of dc bias electric fields are very contrasting in the tetragonal and cubic phases. In the tetragonal phase, sufficiently high dc bias electric fields induce a conductivity peak appearance ∼290 K well evidenced at frequencies higher than 100 kHz. Excluding possible degradation and extrinsic factors, we propose that this peak suggests a ferroelectric-like transition. In the absence of a dc bias electric field, the ac conductivity in the tetragonal phase increases with temperature while decreases with temperature in the cubic phase. Also, ac activation energies for tetragonal and cubic phases were found to be inversely and directly proportional to the dc bias electric field, respectively. This behavior was attributed to the ionic conduction, possibly of MA+and I-ions, for the tetragonal phase. As for the cubic phase, the ac conduction dynamics appear to be metallic-like, which seems to change to a polaronic-controlled charge transport to increased dc bias electric fields.

Gelatin as a Photosensitive Material.

Because this issue journal is dedicated to Gelatin, here we present a few applications of gelatin in the field of optics. Optics is the science that studies the production, propagation, interaction and detection of light. Various materials sensitive to light (photosensitive) are used for detection of light, such as photomultipliers, CCDs, crystals, two dimensional (2D) materials and more. Among the 2D materials, the most popular for several centuries has been gelatin based photographic emulsion, which records spatial distributions of light. More recently (1970), films made of Gelatin with Dichromate (DCG) and dyes have been used. We describe some characteristics and applications of these two photosensitive materials. We also describe examples where gelatin is used as a Relative Humidity (RH) sensor and in the fabrication of optical elements based on gelatin. This article is intended for researchers outside the optics community.

Geometry and spatial orientation of a quadruple node of triple junctions in a europium-doped KI crystal as determined by epifluorescence microscopy.

The geometry and spatial orientation of a typical arrangement of four triple junctions and six grain boundaries sharing a common quadruple node in a Eu2+ -doped KI crystal are investigated by epifluorescence microscopy using the proper doping ion as a fluorochrome. To achieve this, an electronic three-dimensional reconstruction of the studied arrangement of crystal defects was built from microscopy images of different optical cross-sections of this arrangement. Previously, the doping ions were induced, by subjecting the crystal to a long annealing treatment, to form europium precipitates into the crystal grain boundaries. The optical properties of these precipitates were characterized by fluorescence spectrophotometry and used to tailor properly the microscope fluorescence mirror unit, whereas the single-crystal character of the microscope samples was tested by X-ray diffraction. By inspecting the reconstruction under handling, the dihedral angles between the grain boundaries that meet at a common triple junction as well as the angles between the triple junctions sharing the quadruple node were successfully measured at the quadruple node site. The measuring procedures are carefully described. The resulting values (132º, 109º, 119º, 125º, 111º, 124º, 124º, 111º, 125º, 129º, 109º and 122º ± 2º) for the dihedral angles depart for some few degrees from the characteristic angle (120º) of a 3-fold symmetry rotation, whereas the resulting values (104º, 111º, 117º, 103º, 100º and 121º ± 2º) for the triple junction angles are not far from the characteristic angle (109.47º) between the legs of a tetrahedron. These results, indicating that in the close neighbourhood of the quadruple node the studied arrangement of crystal defects deviates from a state of full structural stability, allow this arrangement to be fairly modelled in such a neighbourhood by a distorted tetrahedron. The angles between the studied triple junctions and the host lattice directions [11¯1], [111¯], [1¯11] and [1¯1¯1¯] were also measured at the quadruple node site, and the resulting values (8º, 7º, 6º and 8º ± 2º, respectively) indicate that a symmetry mismatching exists between the tetrahedral model of the studied Eu2+ -decorated arrangement of crystal defects and the KI matrix cubic crystal lattice. This symmetry mismatching is discussed to be responsible for the observed deviation from structural stability.

Synthesis of tunable-band-gap "Open-Box" halide perovskites by use of anion exchange and internal dissolution procedures.

We demonstrate the synthesis of cuboid MAPbBr3 (MA=CH3NH3) microcrystals and subsequent conversion into open-box-like MAPb(Br(1-x)I(x))3 (0⩽x⩽1) microcrystals by anion exchange in MAI solution. During the substitution of Br(-) with I(-), the initial cuboid framework of MAPbBr3 crystals is retained. The preferential internal dissolution of MAPbBr3 due to the surface coverage and protection of MAPb(Br(1-x)I(x))3 induces voids inside the cuboid crystals, finally leading to open-box-like iodide-rich MAPb(Br(1-x)I(x))3. By controlling the degree of anion exchange, the intense light absorption of the product is able to be tuned in specific wavelengths throughout the visible range. This solution-phase anion exchange approach provides a synthetic strategy in designing sophisticated organolead halide perovskites structures as well as tuning the band gaps for further applications across a range of possible domains.