Interactions of electrophoretically silent hemoglobin Hekinan II [HBA1:c.84G>T] with various forms of α-thalassemias and other hemoglobinopathies: novel insights into the molecular and hematological characteristics and genetic origins.

To determine the molecular basis, genotype - phenotype relationship, and genetic origin of Hemoglobin (Hb) Hekinan associated with several forms of α-thalassemia and other hemoglobinopathies for a better understanding of its diverse clinical phenotypes. Seventeen participants with suspected abnormal Hb were studied. Hb analysis was performed using high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE). Mutational and α-haplotypic and structural analyses were conducted, and the effects of mutations on globin-chain stability were determined. All participants harbored Hb Hekinan II (HBA1:c.84 G>T) co-inherited with another α-globin gene anomaly. Three novel genotypes, (ααHekinan/αCSα), (ααHekinan/αCSα,ßA/ßE), and (ααHekinan/αCSα,ßE/ßE), were characterized. Despite being co-inherited with both α- and ß-Hb variants Hb Hekinan II led to minimal changes in erythrocyte parameters, suggesting a non-pathological nature. HPLC but not CE revealed a distinct small shoulder-like Hb pattern. Thai Hb Hekinan II was strongly associated with haplotype [+ - S + - - -] and the possibility of four different haplotypes, while two Burmese Hb Hekinan II were associated with haplotypes [± - S + - + -] and [± - S + - - -]. The novel genotypes identified provide a fresh perspective on Hb Hekinan II diversity. HPLC has superior identification capabilities for samples of Hb Hekinan II co-inherited with α-thalassemia. Thai and Burmese Hb Hekinan II have diverse origins.

Development of amphiphilic hypercrosslinked porous polymers for magnetic extraction of multiple environmental pollutants in water.

Under the principle of similar compatibility, researchers have developed various polarity extractants corresponding to a class of chemicals. Separating different polarities chemicals with one extractant effectively has become a novel research trend in separation science. Given the complexity of environmental sample matrices and the significant differences in polarity and solubility of various compounds, the introduction of hydrophilic groups to hydrophobic material skeletons can lead to sorbents with hydrophilic-lipophilic balance (HLB) property and thus improve their extraction performance for substances with different polarities. In this work, a hypercrosslinked polymer (HCPPz-TPB), designated as HLB, was synthesized by incorporating polar pyrazine and nonpolar triphenylbenzene molecules within each other. Subsequently, a core-shell magnetic composite material was obtained by encapsulating magnetic Fe3O4 nanoparticles in HCPPz-TPB. The material was applied as an adsorbent for magnetic solid phase extraction (MSPE) and combined with a high-performance liquid chromatography-photodiode array detector (HPLC-PDA) to enrich, separate, and detect seven polar contaminants in environmental water samples. The proposed approach, Fe3O4@SiO2@HCPPz-TPB-MSPE-HPLC-PDA, is characterized by its outstanding high sensitivity, low detection limits, wide linear range, and good reproducibility. The method demonstrated satisfactory linearity in the range of 0.05-2 µg mL-1 with R2 values between 0.9969 and 0.9997; the limits of detection (LOD) were observed to be within the range of 0.0019-0.016 µg L-1, and limits of quantification (LOQ) was observed to be within the range of 0.0064-0.054 µg L-1 range with good precision. The recoveries of the different contaminants in the environmental samples ranged from 83.61 to 116.46% (RSD≤10.56, n = 5). The new hydrophilic-lipophilic balance extractant is highly efficient, sensitive, and precise for extracting different polar pollutants. The findings demonstrate that the Fe3O4@SiO2@HCPPz-TPB display a remarkable affinity for multiple targets, driven by complex interactions including multi-stackings and hydrogen bonding as a sorbent. The synthesized Fe3O4@SiO2@HCPPz-TPB may be employed in diverse applications, including extraction, removal, and determination of diverse trace multi-target analytes in complex media.

Hepatoprotective Action Mechanism and Quantification of Soyasaponin Bb in Abri Herba by HPLC and Network Pharmacology.

ETHNOPHARMACOLOGICAL RELEVANCE: The herb of Abrus cantoniensis Hance (AC) is an important Traditional Chinese Medicine (TCM) and is also used as an herbal tea with hepatoprotective action. Soyasaponin Bb is one of the pharmacodynamic substances of AC for the herb's effective pharmacological activity. This study aims to investigate the anti-fibrotic and hepatoprotective activities of soyasaponin Bb in vivo and in vitro experiments, mechanism by network pharmacology and quantification by HPLC. MATERIALS AND METHODS: High-performance liquid chromatography (HPLC) was applied to evaluate the quality of the herb and determine the contents of soyasaponin Bb from different sources and parts of the AC. In vivo experiments were conducted to induce an acute liver injury model by injecting CCl4 into mice, and an in vitro liver fibrosis model was established by cultivating LX-2 cells with TGF-ß1. These models were used to explore the anti-fibrotic and hepatoprotective effects of soyasaponin Bb and its underlying mechanisms.. In addition, the potential target genes corresponding to soyasaponin Bb were identified using the Swiss Target Prediction database through network pharmacology methods. Meanwhile, hepatic fibrosis targets were screened using the GeneCards, TTD, and OMIM disease databases. The STING database was used to construct the protein-protein interaction (PPI) network of soyasaponin Bb-Liver fibrosis. The soyasaponin Bb-hepatic fibrosis disease target-pathway network was constructed using Cytoscape 3.9.1 software. Gene Ontology (GO) and the Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses were performed to enrich and analyze the common targets of the drug and the disease, aiming to identify the potential targets and pathways involved in the anti-fibrotic and hepatoprotective effects of soyasaponin Bb. RESULTS: The content of soyasaponin Bb varied across different sources, with the roots containing the highest concentration, up to 0.2480%. In vivo experiments showed that soyasaponin Bb had a protective effect against CCl4-induced acute liver injury, effectively inhibiting the increase in ALT and AST levels and slowing down the hepatocyte inflammatory damage caused by CCl4. Soyasaponin Bb also down-regulated MDA levels and up-regulated SOD levels, indicating a certain antioxidant capacity. In vitro cell experiments showed that soyasaponin Bb could effectively inhibit the proliferation of HSC-LX2 cells induced by TGF-ß1 by regulating the TGF-ß1/α-SMA pathway, significantly down-regulate the protein expression of TGF-ß1 and α-SMA, while also reducing the levels of inflammatory cytokines IL-6 and IL-1ß. Further network pharmacology analysis suggested that soyasaponin Bb can exert anti-fibrosis activity by regulating the IBD signaling pathway, Th17 signaling pathway, Hepatitis B signaling pathway, and JAK-STAT signaling pathway. CONCLUSION: Soyasaponin Bb is primarily distributed in the root of AC, and it has a strong protective effect against CCl4-induced acute liver injury. It can reduce the level of inflammatory factors, relieve inflammation, and exert anti-fibrotic activity by regulating the TGF-ß1/α-SMA pathway. Its potential anti-liver fibrosis mechanism has been investigated through network pharmacology.

Concept of flexible no-code automation for complex sample preparation procedures.

Driven by demographic changes and dwindling Science Technology Engineering Mathematics enrolments, our research introduces no-code automation as a strategic response, aimed at mitigating labor shortages while enhancing productivity and safety in the laboratory environment. Employing a user-friendly, no-code software platform, we automated a complex HPTLC assay, enabling laboratory personnel to configure and modify workflows without requiring specialized programming skills. The manuscript outlines the deployment of a collaborative robot (cobot), a programmable logic controller (PLC), and the utilization of self-developed open-source hardware components to establish automated stations for sample handling, incubation, spraying, detection, and storage within the assay process. The research addresses challenges such as the handling of fragile HPTLC plates and the seamless integration of automated stations, solved through innovative design solutions and adaptive programming methods. This investigation demonstrates the feasibility and efficiency of no-code automation in overcoming skilled labor deficits.

Design and fabrication of acorn-like Janus molecularly imprinted materials for highly specific separation and enrichment of oxytetracycline from restaurant oily wastewater.

Molecularly imprinted polymer (MIP) is dedicated to the adsorption of target substances in the aqueous phase, but ignores the adsorption in a more complex environment (oily wastewater). In order to explore the application field of existing MIPs, acorn-like Janus particles were fabricated by photo-initiated seed swelling polymerization. A novel amphiphilic Janus-MIP was prepared with the acorn-like Janus particles as matrix, methacrylic acid, ethylene dimethacrylate and oxytetracycline (OTC) as functional monomers, crosslinking agents and template molecules via surface initiated-atom transfer radical polymerization (SI-ATRP). For comparison, the poly (glycidyl methacrylate-co-ethylene glycol dimethacrylate) (poly (GMA-co-EDMA)) microspheres were also utilized as the matrix to prepare common spherical-MIP. The adsorption capacity of Janus-MIP for OTC was 23.8 mg g-1 in oil-water system, while the adsorption capacity of spherical-MIP for OTC was only 12.6 mg g-1 in the same system. At the same time, through high performance liquid chromatography (HPLC) analysis, Janus-MIP can specifically recognize and adsorb trace OTC in restaurant oily wastewater samples, and the proposed method exhibited a lower limit of detection (LOD, 3 ng mL-1) and a higher OTC recovery rate (94.2 %-98.4 %). This work demonstrated great potential for the detection and control of OTC contamination from real samples in an oil-water mixed environment.

Separation and identification of oligonucleotides impurities and degradation products by reversed phase ultra-high performance liquid chromatography using phenyl-bonded stationary phases without ion pairs - A step towards sustainability.

This manuscript discusses the development of a reversed-phase ultra high-performance liquid chromatography (RP UHPLC) method based on phenyl-bonded stationary phases without ion-pairs for the separation and identification of oligonucleotides. The elimination of ion-pair reagents makes the proposed protocol as more compliant to the principles of green chemistry, compared to the traditional ion-pair reversed-phase liquid chromatography methods (IP RP LC). In detail, three phenyl-based stationary phases were tested, namely a C18/AR (a C18 stationary phase with the addition of aromatic groups), a Phenyl-hexyl, and a Diphenyl. Generally, the retention of oligonucleotides increases with the increase of salt concentration and the decrease of the pH, thus confirming the significant impact of van der Waals interactions, salting-out effect, and π-electrons interactions in the retention mechanism. The highest retention and best peak symmetry were observed for the C18/AR stationary phase, while the lowest retention for the Phenyl-hexyl, with retention influenced by the type of salt in the mobile phase. The obtained methods using C18/AR stationary phases allow for the effective separations of positional isomers and for identifying impurities and degradation products using RP UHPLC Q-TOF-MS in a comparatively short time. The application of RP UHPLC Q-TOF-MS provides reasonable selectivity for the resolution of 33 impurities and two degradation products. Both groups of compounds are mainly 3'N and 5'N-shortmers, but in the case of impurities, modifications of cyclic phosphate and phosphate groups were also identified. Nevertheless, Diphenyl and Phenyl-Hexyl may be applied to separate modified oligonucleotides with higher salt concentrations. The proposed separation methods without ion-pair reagents contribute to a more sustainable approach in oligonucleotide analysis.

Preparation of an imidazolium-based poly(ionic liquid) functionalized magnetic three-dimensional graphene oxide for magnetic solid phase extraction of pyrethroids from tea samples.

In this work, an imidazolium-based poly(ionic liquid) (poly(1-dodecyl-3-vinyl-imidazolium bromide) functionalized magnetic three-dimensional graphene oxide (Fe3O4@3D-GO@poly(ImC12+Br-)) was synthesized via a vacuum freezing-drying method and used as a magnetic solid phase extraction (MSPE) adsorbent for the efficient extraction of pyrethroid pesticides from tea samples. The prepared Fe3O4@3D-GO@poly(ImC12+Br-) was confirmed by scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FT-IR), vibrating sample magnetometer (VSM) and X-ray photoelectron spectrogram (XPS). Due to its large specific surface area and the ability to offer multiple intermolecular interactions, including π-π stacking, hydrophobic and hydrogen bond interactions, the prepared Fe3O4@3D-GO@poly(ImC12+Br-) showed high extraction efficiency for pyrethroids. The experimental parameters were optimized by a combination of single-factor method and Box-Behnken design to improve the extraction efficiency. Under the optimum conditions, coupled with high performance liquid chromatography (HPLC), a sensitive analytical method was developed for the determination of pyrethroids, and the proposed method showed wide linear ranges (1.00-100 µg L-1) with correlation coefficients (R) ranging from 0.9980 to 0.9994, low limits of detection (0.100 µg L-1) and good repeatability with intra-day relative standard deviations (RSDs) in the range of 2.90-5.53 % and inter-day RSDs in the range of 1.83-7.76 %. Moreover, the developed method was successfully applied to the determination of pyrethroids in tea samples and satisfactory recoveries ranging from 82.37 % to 114.34 % were obtained. The results showed that the developed Fe3O4@3D-GO@poly(ImC12+Br-) was an ideal, effective and selective material for the extraction and enrichment of pyrethroids from tea samples.

Additive engineering for efficient wide-bandgap perovskite solar cells with low open-circuit voltage losses.

High-performance wide-bandgap (WBG) perovskite solar cells are used as top cells in perovskite/silicon or perovskite/perovskite tandem solar cells, which possess the potential to overcome the Shockley-Queisser limitation of single-junction perovskite solar cells (PSCs). However, WBG perovskites still suffer from severe nonradiative recombination and large open-circuit voltage (Voc) losses, which restrict the improvement of PSC performance. Herein, we introduce 3,3'-diethyl-oxacarbo-cyanine iodide (DiOC2(3)) and multifunctional groups (C=N, C=C, C-O-C, C-N) into perovskite precursor solutions to simultaneously passivate deep level defects and reduce recombination centers. The multifunctional groups in DiOC2(3) coordinate with free Pb2+ at symmetric sites, passivating Pb vacancy defects, effectively suppressing nonradiative recombination, and maintaining considerable stability. The results reveal that the power conversion efficiency (PCE) of the 1.68 eV WBG perovskite solar cell with an inverted structure increases from 18.51% to 21.50%, and the Voc loss is only 0.487 V. The unpackaged device maintains 95% of its initial PCE after 500 h, in an N2 environment at 25°C.

Nanoparticles based on biopolymers improved antioxidant activity of phenolic compounds from jambolan (Syzygium cumini (L.) skeels).

Jambolan (Syzygium cumini L.) is an underutilized fruit rich in bioactive phenolic compounds, specially anthocyanins, but the low stability of these substances and interaction with other compounds in the food matrix limit their application as food additives; nanoencapsulation is the best strategy to overcome these limitations. This study aimed to nanoencapsulate a phenolic-rich jambolan extract using whey proteins and pectin by nanoprecipitation in different antisolvent compositions. Two formulations were synthesized (7.33 % extract, 1.67 % pectin, and 5 % concentrated or isolated whey protein) precipitated in different acetone concentrations (50, 70, and 100 % v/v). SEM showed particles with spherical shape and smooth surface. DLS pointed diameters between 82 nm and 116 nm. FTIR indicated chemical interactions between the materials. Encapsulation efficiency showed high phenolic compounds entrapment in all systems [73.81-84.65 %, p > 0.05]. However, particles precipitated in 50 and 100 % acetone (v/v) showed greater anthocyanins retention [56.89-35.24 %, p < 0.05]. Nanoencapsulation potentiated the antioxidant activity up to 110 % more than the crude extract (p < 0.05). These results show the potential of nanoprecipitation as an effective encapsulation process and the biopolymers combination to produce nanoparticles containing jambolan phenolic compounds to promote their application in foods and health products.

Detection of Hemoglobin Constant Spring: A Comparison of Capillary Electrophoresis Versus High-Performance Liquid Chromatography.

INTRODUCTION: In Malaysia, Hemoglobin Constant Spring (Hb CS) is the most common non-deletional α-thalassemia, caused by a mutation at the termination codon of the α2-globin gene (TAA>CAA). Detection typically involves identifying an abnormal peak at zone 2 on capillary electrophoresis (CE) or a small peak at the C-window on high-performance liquid chromatography (HPLC), indicative of Hb CS. OBJECTIVE: This study aimed to investigate the correlation between HPLC and CE in detecting Hb CS, evaluating their respective diagnostic accuracies and limitations. METHODS: A cross-sectional study was conducted at Hospital Sultanah Nur Zahirah involving secondary school students (Form 4) from Terengganu who participated in a thalassemia screening program conducted by the Ministry of Health (MOH) from January 2019 to December 2022. Blood samples from subjects showing a positive peak in zone 2 of CE and a small peak at the C-window of HPLC were selected. Molecular studies of these samples were performed to confirm the presence of Hb CS. For the statistical analysis, the Pearson correlation coefficient was employed to assess the relationship between CE and HPLC results. RESULTS: Hb CS was confirmed in all samples by molecular studies, revealing 92.3% heterozygous, 7.2% compound heterozygous, and 0.5% homozygous cases. CE detected 92.3% of heterozygous Hb CS cases, while HPLC detected only 48.2%. For compound heterozygous Hb CS, CE detected 100%, whereas HPLC detected 89.3%. Both homozygous cases were detected by CE and HPLC. The Pearson correlation coefficient test showed a significant linear relationship (p<0.001) between CE's zone 2 peak values and HPLC's C-window peaks (n=389).  Conclusion: These findings highlight the efficacy of CE as a reliable method for Hb CS detection, suggesting its potential superiority over traditional HPLC in clinical settings.

Oxygen Reduction Reaction Activity and Stability of Shaped Metal-Doped PtNi Electrocatalysts Evaluated in Gas Diffusion Electrode Half-Cells.

The synthesis of bimetallic and trimetallic platinum-based octahedral catalysts for the cathode of proton exchange membrane fuel cells (PEMFCs) is a particularly active area aimed at meeting technological requirements in terms of durability and cost. The electrocatalytic activity and stability of these shaped catalysts were tested at relatively high potentials (@0.9 V vs RHE) and at lower current densities using the rotating disk electrode, which is less suitable for assessing their behavior under the operating conditions of PEMFCs. In this work, we use a gas diffusion electrode (GDE) half-cell setup to test the performance of the catalysts under application-oriented conditions, relatively higher current densities, and a square-wave stability test. After the stability test, we analyzed the GDE catalytic layer to study the agglomeration and dissolution of the transition metal under these conditions by using high-resolution scanning electron microscopy and energy-dispersive X-ray spectroscopy. The present results provide valuable guidance for developing next-generation active and durable catalysts for PEMFCs.

[Determination and antioxidant analysis of seven flavonoids in bamboo-leaf extracts].

The flavonoid contents of different bamboo-leaf extracts and their relationships to antioxidant activity were investigated in this study by preparing nine samples using two commercially available bamboo-leaf extract products and seven bamboo-leaf extracts such as Phyllostachys edulis. A high performance liquid chromatography (HPLC) method was established to determine seven flavonoid components (orientin, isoorientin, vitexin, isovitexin, tricin, luteolin and luteoloside) in these samples, which were separated using a SymmetryShieldTM RP8 column (250 mm×4.6 mm, 5 µm) under gradient-elution conditions using acetonitrile as mobile phase A and 0.5% (v/v) acetic acid aqueous solution as mobile phase B. The antioxidant activities of the samples were evaluated using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) and hydroxyl radical-scavenging assays, with half inhibitory concentration (IC50) as an indicator and the butylated hydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ) antioxidants as positive controls. Pearson correlation was then used to analyze the relationship between flavonoid content and antioxidant activity. The HPLC method was found to be accurate and reliable for determining the flavonoid contents of the bamboo-leaf extracts. The seven flavonoids were well separated, and good linear relationships were exhibited (correlation coefficients (R2)≥0.9990). Furthermore, the contents of the seven flavonoids in the bamboo-leaf extracts ranged from 14.97 to 183.94 mg/g, with the highest content of 183.94 mg/g recorded for Phyllostachys edulis. The bamboo species exhibited significantly different flavonoid contents, with Phyllostachys edulis showing the highest orientin, isoorientin, and vitexin levels of 38.45, 101.30, and 9.42 mg/g, respectively. Moreover, the bamboo-leaf extracts exhibited IC50 values of 78.23-179.41 mg/L for DPPH-radical-scavenging, while values of 203.48-1250.81 mg/L were recorded for hydroxyl radicals. The Phyllostachys edulis leaf extract exhibited the strongest antioxidant activity, with the lowest IC50 values of 78.23 and 203.48 mg/L for DPPH and hydroxyl, respectively; it showed greatly significant for the further development and application of Phyllostachys edulis. Finally, the relationships between flavonoid content and the DPPH- and hydroxyl-radical-scavenging activities (based on the IC50 values) were correlated, which revealed that the orientin and isoorientin contents are closely related to the antioxidant activities of the bamboo-leaf extracts. Consequently, the orientin and isoorientin contents can be used as indicators for evaluating the antioxidant activities of bamboo-leaf extracts.

[Accurate determination of three new antihypertensive drugs illegally added to food using ultra-high performance liquid chromatography-tandem mass spectrometry].

Effective strategies are required to address food safety issues related to the illegal addition of antihypertensive drugs to food and claims of antihypertensive function. In this study, a novel ultra-high performance liquid chromatography-triple-quadrupole mass spectrometry (UHPLC-MS/MS) method was developed for the simultaneous determination of three antihypertensive drugs (azilsartan, candesartan cilexetil, and lacidipine) in 12 food matrices (pressed candies, solid beverages, alternative teas, tea drinks, biscuits, jellies, mixed liquors, oral liquids, medicinal teas, tablets, hard capsules, and soft capsules). Initially, mass spectrometry parameters, such as the collision energies of the three antihypertensive drugs, were optimized. Subsequently, the response intensities and chromatographic separation conditions of the three drugs in different mobile phases were compared. In addition, to enhance the recoveries, various extraction solvents and purification methods, including solid-phase extraction (SPE) columns and the QuEChERS technique, were investigated. In the developed method, sample determination involved three steps. First, the sample was extracted using 0.2% (v/v) formic acid in acetonitrile and then filtered using high-speed centrifugation, in addition, the extracted solution of alternative tea and medicinal tea was purified using the QuEChERS technique. Second, the supernatant was diluted with water, and filtered through a 0.22 µm polytetrafluoroethylene (PTFE) membrane. Finally, the analytes were separated on an Agilent Eclipse Plus RRHD C18 column (50 mm×2.1 mm, 1.8 µm) using a 5 mmol/L ammonium formate aqueous solution and acetonitrile as the mobile phases under gradient elution conditions and then detected using UHPLC-MS/MS with positive electrospray ionization (ESI) in the multiple reaction monitoring (MRM) mode. Quantitative analysis was performed using a matrix-matched external standard method. Methodological validation showed good linear relationships for all three antihypertensive drugs in the investigated concentration ranges, with correlation coefficients (r2) greater than 0.996. The limit of detection (LOD) and limit of quantification (LOQ) of lacidipine were 0.02 mg/kg and 0.04 mg/kg, respectively, whereas those of the other two drugs were 0.01 mg/kg and 0.02 mg/kg, respectively. In the 12 food matrices, the average recoveries of the drugs ranged from 86.6% to 107.5% with relative standard deviations (RSDs) of 1.1%-10.9% (n=6) at low, medium, and high spiked levels. Furthermore, this method was successfully applied to the analysis of real food samples. Overall, the newly developed method is simple, rapid, sensitive, accurate, and suitable for the qualitative and quantitative determination of antihypertensive drugs in different food matrices. This work could provide technical support for food safety agencies in implementing measures against the illegal addition of antihypertensive drugs to food.

Comparative Analysis of the Chemical Constituents of Chrysanthemum morifolium with Different Drying Processes Integrating LC/GC-MS-Based, Non-Targeted Metabolomics.

Chrysanthemum morifolium is a perennial herbaceous plant in the Asteraceae family that is used as a medicine and food owing to its superior pharmacological properties. Irrespective of its application, C. morifolium must be dried before use. Shade drying (YG) and heat drying (HG) are the two drying methods used in most origins. Given the abundance of flavonoids, phenolic acids, and terpenoids, the primary medicinal active constituents of C. morifolium, it is important to determine whether the composition and content of these compounds are altered during the drying processes. To test this, the changes in the chemical composition of C. morifolium flowers after YG and HG using full-spectrum, non-targeted LC/GC-MS-based metabolomics and, subsequently, the three indicator components of C. morifolium-chlorogenic acid, 3,5-dicaffeoylquinic acid, and luteolin-7-O-glucoside-were accurately quantified by HPLC. The results of the non-targeted metabolomics analysis revealed that YG- and HG-processed C. morifolium differed significantly with respect to chemical contents, especially flavonoids, phenolic acids, and terpenoids. The levels of the indicator components and their precursors also differed significantly between the YG and HG treatments. The contents of most of the flavonoids and key phenolic acids, terpenoids, and carbohydrates were higher with YG than with HG pre-treatment. These results revealed the changes in the chemical composition of C. morifolium during the YG and HG processes, thus providing a reference for the further optimization of the production and processing of chrysanthemums.

Synergistic Enhancement of Biaxial Stretching and Multilayer Composites in All-Solid-State Polymer Electrolytes.

As an important component of lithium-ion batteries, all-solid-state electrolytes should possess high ionic conductivity, excellent flexibility, and relatively high mechanical strength. All-solid-state polymer electrolytes (ASSPEs) based on polymers seem to be able to meet these requirements. However, pure ASSPEs have relatively low ionic conductivity, and the addition of inorganic fillers such as lithium salts will reduce their flexibility and mechanical strength. To address the above issues, in this paper, the solvent-free method was used to prepare a poly(vinylidenefluoride-co-hexafluoropropylene)/lithium bis(trifluoromethanesulfonyl) imide/poly(ethylene oxide) all-solid-state polymer electrolyte, which was then subjected to 4 × 4 magnification synchronous bidirectional stretching. Subsequently, it was multilayered with PEO-based composite polymer electrolytes to obtain multilayered composite polymer electrolytes (MCPEs). Bidirectional stretching provides superior in-plane and out-of-plane mechanical properties to MCPEs by inducing molecular chain orientation, which suppresses the growth of lithium dendrites. Concurrently, it facilitates the formation of the ß-crystal form of PVDF-HFP, thereby weakening the ion solvation effect and reducing the lithium-ion migration energy barrier. Multilayered compounding improves the interfacial contact between MCPEs and electrodes, thereby reducing the interfacial impedance. Experiments have demonstrated that the MCPEs prepared in this paper exhibit high ionic conductivity at room temperature (1.83 × 10-4 S cm-1), low interfacial resistance (547 Ω cm-2), excellent mechanical properties (26 MPa), and excellent cycling rate performance (a capacity retention rate of 90% after 110 cycles at 0.1 C), which can meet the performance requirements of lithium-ion batteries for ASSPEs.

High-performance liquid chromatography-tandem mass spectrometry was used to measure 20 antidepressants in human serum.

Aim: This study used high performance liquid chromatography-tandem mass spectrometry to quantify the blood concentrations of 20 antidepressants, such as bupropion and fluoxetine, in human serum samples.Methods: After direct precipitation with a 1:9 protein precipitant of methanol and acetonitrile, serum samples were examined using high-performance liquid chromatography-tandem mass spectrometry (UPLC-MS). The material was separated using a Poroshell 120 EC-C18 column (3.0 mm × 50 mm, 2.7 µm) and gradient elution. The mobile phases were phase A 0.01% formic acid aqueous solution (containing 2 mmol/ml ammonium acetate) and phase B methanol solution. A 0.45 ml/min flow rate was used to divide the sample and inject 5 µl. Electrospray ionization source positive ion mode and multiple reaction monitoring modes were used for analysis. Measurement was quantified using an internal standard technique.Results: Accuracy ranged from 90.3 to 114.3%, intra-day precision from 100.1 to 112.3%, inter-day precision from 100.4 to 112.6%, extraction recoveries from 85.5 to 114.5% and matrix effect from 85.6 to 98.7%.Conclusion: This approach is fast, accurate, sensitive and repeatable. It can identify 20 antidepressants in blood simultaneously. This can be used to monitor blood drug levels and medication metabolism.

[Box: see text].

The significance of therapeutic drug monitoring in detecting low medication adherence in patients with cancer: A case study of cabozantinib.

Maintaining good medication adherence is important for providing desirable outcomes from medication therapy. We showed that therapeutic drug monitoring (TDM) contributed to the identification of low medication adherence to cabozantinib in a patient with cancer. We present an educational case to assist with understanding TDM in a patient with cancer.

[Quality identification of Aurantii Fructus Immaturus from different origins and their adulterants].

Aurantii Fructus Immaturus(AFI) is a traditional Chinese herbal medicine with multiple origins from Citrus aurantium and its legally cultivated variants. With advancements in agricultural biotechnology, many new cultivated varieties have sprung up,leading to an abundance of AFI adulterants and chaos in the herbal medicine markets. This study developed a specific identification method for AFI and its closely related adulterants by examining the appearance trait, content of extract, and multiple ingredients,involving indicators such as the ratio of pulp capsule to cross section diameter(Pc/Cs ratio), the content of extract, and the profile of 11 ingredients. The research finds that:(1) Pc/Cs ratio can conveniently identify adulterants such as Poncirus trifoliata, Ju, and Babagan from the genuine AFI.(2) The extract content can be used to identify adulterants originated from C. wilsonii with C. aurantium.(3) The contents of synephrine in all the samples were in accordance with the Chinese Pharmacopoeia except for the adulterants from P. trifoliata, C. wilsonii, C. aurantium 'Changshanhuyou' and orah mandarins. The synephrine content was high as 1. 40% in some C. sinensis varieties. The mass fraction of hesperidin was over 10. 00% in C. sinensis, while it was below 2. 50% in C. aurantium. C. aurantium contained high levels of naringin(3. 96%-15. 21%) and neo-hesperidin(9. 38%-21. 93%).(4) The compositions of adulterants from P. trifoliata and C. wilsonii were more similar to that of C. aurantium 'Daidai', but with significantly lower neo-hesperidin content(0. 03%-0. 14%) than that in C. aurantium, and they lacked hesperetin and tangeretin. C. maxima(originating from C. maxima) showed closer composition to Choucheng and hybrid originated from Citrus aurantium × Poncirus trifoliata, but had higher hesperidin content(3. 13%) than that in C. aurantium. Ju was closely related to C. sinensis and neither contained naringin nor neo-hesperidin. Hesperidins in Babagan and orah mandarins were similar to that in C. sinensis, with none containing rhoifolin. These quality indicators in combination can accurately distinguish between C. sinensis, C. aurantium, and their closely related adulterants(P. trifoliata, C. wilsonii, C. maxima, orah mandarins and C. reticulata), which are expected to provide a systematic method for quality control of AFI.

[Application of chromatographic retention time correction in untargeted screening].

OBJECTIVE: Chromatographic retention time correction is one of the important steps to effectively improve the accuracy of identification. This article proposed a strategy for untargeted screening of biological samples based on retention time correction. METHODS: A pre-treatment method for biological samples was established. The conditions of liquid chromatography and mass spectrometry were optimized. Fourteen compounds were selected as calibration agents. The retention time correction of different samples, different injection time, different brands of instruments, changing chromatographic column and changing mobile phase were investigated. RESULTS: Calibration agents had a wide coverage, good stability and no interference with sample determination. They could be uniformly distributed in the chromatogram in both positive and negative ion modes. The chromatogram was divided into several time intervals. Calibration agents in each time period were used for retention time linear correction, and the correction effects were good. CONCLUSION: The retention time correction method could eliminate the retention time drift caused by experimental conditions, improve the accuracy of qualitative analysis, and help to solve the problem of high false positive result based on mass spectrum information.

Super-Strong, Super-Stiff, and Super-Tough Fluorescent Alginate Fibers with Outstanding Tolerance to Extreme Conditions.

The combination of multiple physical properties is of great importance for widening the application scenarios of biomaterials. It remains a great challenge to fabricate biomolecules-based fibers gaining both mechanical strength and toughness which are comparable to natural spider dragline silks. Here, by mimicking the structure of dragline silks, a high-performance fluorescent fiber Alg-TPEA-PEG is designed by non-covalently cross-linking the polysaccharide chains of alginate with AIEgen-based surfactant molecules as the flexible contact points. The non-covalent cross-linking network provides sufficient energy-dissipating slippage between polysaccharide chains, leading to Alg-TPEA-PEG with highly improved mechanical performances from the plastic strain stage. By successfully transferring the extraordinary mechanical performances of polysaccharide chains to macroscopic fibers, Alg-TPEA-PEG exhibits an outstanding breaking strength of 1.27 GPa, Young's modulus of 34.13 GPa, and toughness of 150.48 MJ m-3, which are comparable to those of dragline silk and outperforming other artificial materials. More importantly, both fluorescent and mechanical properties of Alg-TPEA-PEG can be well preserved under various harsh conditions, and the fluorescence and biocompatibility facilitate its biological and biomedical applications. This study affords a new biomimetic designing strategy for gaining super-strong, super-stiff, and super-tough fluorescent biomaterials.