Efficacy of topical drug application to manage in-office bleaching sensitivity: a systematic review and meta-analysis of randomized clinical trials.

OBJECTIVES: To answer whether the topical drug application can reduce in-office tooth bleaching sensitivity without impairing the color change. MATERIALS AND METHODS: This review was registered on PROSPERO (CRD42024524171). Two reviewers screened PubMed, Web of Science, Scopus, Embase, and clinicaltrials.gov in March 2024 independently for randomized clinical trials investigating the efficacy of topical drug application to manage in-office tooth bleaching sensitivity. The risk of bias was assessed using Cochrane's Risk of Bias tool (RoB2). Certainty of the evidence was assessed using the Grading of Recommendations: Assessment, Development, and Evaluation tool (GRADE). The meta-analyses evaluated the bleaching sensitivity and color change with RevMan 5.4 software. RESULTS: 334 articles were retrieved. The final sample was composed of four articles. Tested drugs were Otosporin, Eugenol, Ibuprofen with arginine, and Dipyrone. The meta-analysis evidenced no difference in bleaching sensitivity up to 1 h (MD, -0.39; 95% CI, -0.89, 0.11), 24 h (MD, -0.26, 95% CI, -0.71, 0.18), or 48 h (MD, 0.00, 95% CI, -0.16, 0.16). Meta-analysis for color change evidenced no difference for color change (MD, 0.03; 95% IC, -0.56, 0.61). The risk of bias was low. The certainty of the evidence was rated moderate for bleaching sensitivity and high for color change. CONCLUSIONS: Although topical drug application did not impair color change, it was ineffective in reducing in-office tooth bleaching sensitivity. CLINICAL RELEVANCE: topical drug application on dental enamel is not an effective approach in reducing bleaching sensitivity, but several modifications can be made in future studies to possibly achieve a better outcome.

Tooth-Whitening with a Novel Phthalimido Peroxy Caproic Acid: Short Communication.

Professional tooth whitening in the dental office is a popular cosmetic procedure and is performed under carefully monitored conditions. This allows the controlled application of a relatively high concentration of bleaching ingredients based on hydrogen peroxide or peroxide derivatives which produce reactive oxygen species, and consequently induce enamel erosion, alteration of the microhardness of the teeth, irritation of the gums, pain or post bleach sensitivity. This short communication describes the successful and reliable application of a new professional tooth whitening technique using a novel phthalimido peroxycaproic acid complex while avoiding reactive oxygen species.

Bleaching efficacy of in-office dental bleaching with different application protocols: a single-blind randomized controlled trial.

OBJECTIVE: This randomized controlled trial aimed to evaluate the equivalence in the color change, adverse effects, self-perception (AS) and the impact on oral condition (IO) of participants submitted to different application protocols of in-office dental bleaching. MATERIALS AND METHODS: 165 participants were bleached with a 35% hydrogen peroxide gel (Total Blanc Office One-Step, DFL), according to the following protocols: (1) 2 applications of 20-min each (2 × 20 min); (2) 1 × 40-min and; (3) 1 × 30-min. The color change was evaluated with the Vita Easyshade spectrophotometer, Vita Classical and Vita Bleachedguide scales. The intensity and risk of tooth sensitivity (TS) and gingival irritation (GI) were recorded using a 0-10 visual analogue scale (VAS). AS and IO was assessed before and after the bleaching procedure using the Orofacial Aesthetic Scale and Oral Health Impact Profile-14, respectively. RESULTS: Equivalent color change were observed (p < 0.001), with no significant difference between groups. The group 2 × 20 min presented the highest risk of TS (76%, 95% CI 63 to 85), compared to the 1 × 30 min (p < 0.04). The intensity of TS and GI and the risk of GI was similar between groups (p > 0.31). Irrespectively of the group (p = 0.32), significant improvements were observed for all items of AS and IO after bleaching (p < 0.02). CONCLUSIONS: The 1 × 30 min protocol produced equivalent color change to the other bleaching protocols with reduced risk of TS and shorter application time. CLINICAL RELEVANCE: A more simplified application regimen of a single application of 30 min yields effective bleaching and patient satisfaction while minimizing undesirable side effects and improving patient satisfaction.

Is a White Diet Necessary for Tooth Bleaching Procedures? A Systematic Review and Meta-Analysis.

The aim of this investigation was to conduct a systematic review and meta-analysis to determine the necessity of a white diet during or following a bleaching procedure. This systematic review and meta-analysis followed the PRISMA guidelines meticulously. The research question was: Is a white diet necessary during and/or after a bleaching treatment? In vitro studies or clinical trials reporting the color change in bleached enamel after the use of a free-staining diet were considered for full-text review. For the analyses, a random-effects model was employed. Statistical significance was defined as a p-value < 0.05. A total of 17 documents were eligible for qualitative analysis: 5 clinical trials and 12 in vitro studies. Only data from the clinical trials were included in the meta-analysis. For at-home bleaching, differences in the color among the subjects were not statistically significant during the first (p = 0.64), second (p = 0.26) or third (p = 0.43) weeks of treatment. Also, the color difference one month after finishing the bleaching treatment were not statistically significant (p = 0.27). The color difference one month after finishing an in-office treatment showed that the restrictions on diet did not significantly improve the bleaching outcomes (p = 0.90). According to the findings of this review, dietary restrictions are not necessary during or after bleaching procedures.

Aesthetic impact of resin infiltration and its mechanical effect on ceramic bonding for white spot lesions.

BACKGROUND: Treating white spot lesions (WSLs) with resin infiltration alone may not be sufficient, raising questions about its compatibility with other treatments amid controversial or incomplete data. Therefore, this study aimed to assess the aesthetic feasibility of resin infiltration combined with bleaching, as well as its potential mechanical effect on ceramic bonding to WSLs. METHODS: One hundred and fifty flat enamel surfaces of bovine incisors were prepared. Ninety specimens were deminerailized and randomly assigned to three groups(n = 30): post-bleaching resin infiltration (Bl-R), pre-bleaching resin infiltration (R-Bl), and only resin infiltration (R). Color, surface roughness and microhardness were assessed in immediate, thermocycling and pigmentation tests. The remaining sixty samples were randomly assigned to three groups (n = 20): control (Ctrl), bonding (Bo), pre-bonding resin infiltration (R-Bo). Shear bonding strength, failure mode, micro-leakage depth and interface morphology were evaluated after ceramic bonding. The Tukey test and analysis of variance (ANOVA) were used for statistical analysis. RESULTS: For the effect of resin infiltration and bleaching on WSLs, the R-Bl group showed the worst chromic masking ability, with the highest |ΔL|, |Δa|, |Δb|, and ΔE values after treatment. Compared with those in the Bl-R group, the R-Bl and R groups showed significant time-dependent staining, which is possibly attributed to their surface roughness. For the effect of resin infiltration on the adhesive properties of WSLs, resin infiltration reduced the staining penetration depth of WSLs from 2393.54 ± 1118.86 µm to 188.46 ± 89.96 µm (P < 0.05) while reducing WSLs porosity in SEM observation. CONCLUSIONS: Post-bleaching resin infiltration proved to be advantageous in the aesthetic treatment of WSLs. Resin infiltration did not compromise bonding strength but it did reduce microleakage and enhance marginal sealing. Overall, resin infiltration can effectively enhance the chromatic results of treated WSLs and prevent long-term bonding failure between ceramics and enamel. Based on these findings, the use of post-bleaching resin infiltration is recommended, and resin infiltration before ceramic bonding is deemed viable in clinical practice.

Evaluation of tooth color change after a bleaching process with different lasers.

The aim of this in vitro study was to evaluate the efficiency of diode laser-activated bleaching systems for color change of teeth. 75 extracted teeth were studied in five different bleaching protocols. Group 1: diode laser 445 nm, 320 µm fiber, 0.5W, continuous wave mode, dose 53 J/cm2. Group 2: diode laser 970 nm, 320 µm fiber, 1W, continuous wave mode, dose 106.10 J/cm2. Group 3: diode laser 940 nm, bleaching handpiece, 7W, continuous wave mode, dose 105 J/cm2. Group 4: diode laser 940 nm, 300 µm fiber, 2W, continuous wave mode, dose 47.16 J/cm2. Group 5: bleaching process without laser activation. In groups 1, 2 and 5, teeth were bleached with Perfect Bleach Office + and in groups 3 and 4, LaserWhite20 bleaching gel was used. Tooth color was determined immediately after the bleaching process using a spectrophotometer. Color change data on the CIE L * a * b* system was analyzed statistically by the one-way ANOVA and Tukey's HSD test. All bleaching procedures resulted in a change of color. All laser groups (∆E * ab > 3) have statistically larger ∆E * ab values than the control group (∆E * ab = 0.73) (p < 0.05). The diode laser 445 nm has the largest ∆E * ab value (∆E * ab = 4.65) and results in a significantly higher color difference than all other groups. In terms of color score difference in VITA Shades, all laser-activated groups lead to a lightening effect while the control group leads to only a slight lightening effect. The diode laser 445 nm produced the greatest color difference. Laser-activated bleaching is more effective than conventional bleaching without light activation. The diode laser 445 nm performs best in this in vitro study.

In vitro comparative evaluation of antioxidative effect of selenium alone and in combination with green tea and alpha-tocopherol on the shear bond strength of universal composite resin to enamel after in-office bleaching.

Background: Antioxidant application soon after bleaching process increases the shear bond strength (SBS) of composite resin to enamel. Aims: The aim of the study was to evaluate the antioxidant effects of selenium alone and in combination with alpha-tocopherol (αT) and green tea (GT) on SBS of composite resin to enamel following in-office bleaching with 38% hydrogen peroxide (HP). Methods: Sixty extracted human single -rooted premolar teeth were cleaned and embedded in acrylic resin blocks at the level of cementoenamel junction(CEJ) followed by bleaching with 38% hydrogen peroxide (HP) and arbitrarily divided into seven groups (n=10) for antioxidant application: Group I (negative control): intact teeth, Group II (positive control): only bleaching, Group III: 10% selenium (Se), Group IV: 10% alpha tocopherol (αT), Group V: 10% αT +10% Se, Group VI: 10% Green tea (GT), Group VII: 10%GT+10% Se. In all groups, self-etch adhesive was applied and composite restoration was done, and specimens were stored in distilled water for 24h followed by SBS evaluation. Statistical Analysis: One-way analysis of variance and post hoc Tukey's tests were used (P < 0.05). Results: The highest SBS was found in negative control Group I (intact teeth) and least in positive control Group II (bleached teeth), whereas in experimental groups, Group VII (GT + Se) showed highest followed by Groups V (αT + Se), III (Se), and VI (GT) and least in Group IV (αT). Conclusion: Combination of selenium with green tea and alpha tocopherol enhanced the SBS of composite resin following in-office bleaching.

Correlation between patient satisfaction and color changes after tooth bleaching.

OBJECTIVE: This study aimed to investigate the relationship between patient satisfaction of outcomes and tooth color changes during and after tooth bleaching. METHODS: In this clinical trial, 63 volunteers participated in an in-office bleaching procedure using a 40% hydrogen peroxide gel. The treatment consisted of two sessions, each comprising two 30-min applications of the bleaching gel. The L*, a*, and b* values of six maxillary anterior teeth were measured at baseline (T1), after the first bleaching session (T2), after the second bleaching session (T3), 1 week after the second in-office bleaching session (T4), and 3 weeks after the second in-office bleaching session (T5). The color differences (ΔE00 ) were calculated using CIEDE2000. A satisfaction scale with a score ranging from 0 to 3 was used to record participants' level of satisfaction with their tooth color at each time point. The data were statistically analyzed using repeated measures analysis of variance and logistic regression (α = 0.05). RESULTS: Significant correlations were observed between ΔL*, Δb*, and ΔE00 values at T3 and patient satisfaction (all p < 0.05). The regression model indicated a more pronounced impact of Δb* on patient satisfaction compared to ΔL*. The established regression models were as follows: Logit (PL*b* ) = -4.354 + 0.271ΔL* - 0.585Δb* and Logit (PΔE00 ) = -2.552 + 0.521ΔE00 . The findings suggested a minimum ΔE00 value of 4.90 for satisfactory results. A minimum ΔE00 value of 3.9, 5.0, and 6.8 was necessary for central incisors, lateral incisors, and canines, respectively, to achieve a satisfactory result. CONCLUSIONS: The ΔL*, Δb*, and ΔE00 values were found to be significantly correlated with patient satisfaction after bleaching. Δb* was identified as having a greater influence on patient satisfaction than ΔL* values in the regression model. Furthermore, attaining a minimum ΔE00 value of 4.90 is necessary to achieve satisfactory outcomes. A greater ΔE00 value is needed for canines than for incisors to achieve equivalent patient satisfaction. CLINICAL SIGNIFICANCE: This study emphasizes the importance of considering the extent of color change needed to achieve patient satisfaction after tooth bleaching procedures.

A randomized clinical trial investigating the effect of three vital tooth bleaching protocols on oral health-related quality of life.

Objectives: This study aimed to compare changes in oral health-related quality of life (OHRQoL) resulting from three vital tooth bleaching protocols. Methods: The participants (n = 105) were randomly assigned to one of three vital bleaching treatment groups: home bleaching (HB), in-office bleaching (IOB), or combined bleaching (CB). HB involved the use of custom-made trays and 10% carbamide peroxide for a 14-day treatment period. IOB utilized 37.5% hydrogen peroxide applied in three cycles. CB treatment involved the use of IOB followed by HB. Tooth colour change was evaluated using a shade guide (ΔVS) and a digital spectrophotometry device (ΔES). The Oral Health Impact Profile-14 (OHIP-14) and Oral Impact on Daily Performance-22 (OIDP-22) instruments were used to assess changes in OHRQoL at baseline, 15-days and 6-month recalls. Linear mixed models were used to estimate between- and within-group differences. Results: All bleaching protocols led to significant improvements in overall OHIP-14 scores at the 6-month recall (p ≤ 0.037). CB and IOB treatments were associated with more substantial positive impacts on overall scores, psychological discomfort, physical disability (CB only), and psychological disability (CB only) compared to HB (p ≤ 0.011). Significant enhancements in OIDP-22 scores were observed in the CB and HB groups at the 6-month recall compared to baseline (p ≤ 0.006), with evidence indicating that these improvements were greater in the CB group compared to the IOB group (p = 0.007). Conclusion: All bleaching treatments demonstrated a positive impact on OHRQoL. However, the positive impact was most consistent across domains and age groups in the CB group. The positive impact was less pronounced in older age groups.

The Use of Diode Low-Power Laser Therapy before In-Office Bleaching to Prevent Bleaching-Induced Tooth Sensitivity: A Clinical Double-Blind Randomized Study.

INTRODUCTION: The present study aimed to investigate the effectiveness of low-level laser therapy (LLLT) use before in-office bleaching to prevent an increase in the risk and intensity of tooth sensitivity. METHODS: Thirty patients were selected. Before bleaching with 38% hydrogen peroxide, the participants were randomly divided into two groups of 15 subjects. Test group: the patients' teeth were subjected to a preliminary LLLT procedure by an 810 nm diode laser with 0.5 W for 30 s for an energy density of 15 J/cm2 and a group placebo. All patients were instructed to report their cold sensitivity experiences immediately, 1 h, 24 h, and 48 h after the end of bleaching via a VAS score. RESULTS: The results obtained show an increase in VAS values for both groups (290 and 490 vs. 224 and 234 of baseline time of test and placebo group, respectively); afterward, the VAS value seemingly decreases at 1 h after the end of bleaching, approaching the baseline VAS for the test group (274) in comparison to the placebo group. CONCLUSIONS: The use of preliminary diode LLLT could represent a valid possibility to reduce the occurrence of tooth sensitivity post-whitening and shorten recovery time in cases where tooth sensitivity occurs.

Effect of in-office bleaching agent on the surface roughness and microhardness of nanofilled and nanohybrid composite resins.

Background: To compare the surface roughness and microhardness of Ceram.x® SphereTEC™ one and Filtek Z350 XT after in-office bleaching with Pola office. Methods: Twenty samples each of (10 mm diameter and 2 mm height) Ceram.x® SphereTEC™ one and Filtek Z350 XT were prepared. The samples were subjected to three bleaching sessions with 35% hydrogen peroxide (Pola office) with a seven-day interval between each session. Surface roughness and microhardness of the prepared samples prior to and after the bleaching regimen were measured using a profilometer and Vickers hardness tester, respectively. Results: A significant reduction (p <0.001) in the surface hardness of Filtek Z350 XT from 27.67 ± 2.10 to 17.83 ± 1.36 Vickers hardness number (VHN) was observed after the bleaching whereas no significant reduction in surface hardness was observed with Ceram.x® SphereTEC™ one. The adjusted mean (estimated marginal mean) microhardness after bleaching for Ceram.x ® SphereTEC™ one (35.79 ± 1.45) was significantly higher than Filtek Z350 XT (19.54 ± 1.45) (p < 0.001). However, in-office bleaching of these materials did not significantly alter their surface roughness. Conclusions: In office-bleaching with 35% hydrogen peroxide can reduce the microhardness of nanofilled composite. However, the surface roughness was not influenced by the bleaching procedure in both nanohybrid and nanofilled composite resin materials.

Effect of medium or high concentrations of in-office dental bleaching gel on the human pulp response in the mandibular incisors.

Objectives: The present study evaluated the pulp response of human mandibular incisors subjected to in-office dental bleaching using gels with medium or high concentrations of hydrogen peroxide (HP). Materials and Methods: The following groups were compared: 35% HP (HP35; n = 5) or 20% HP (HP20; n = 4). In the control group (CONT; n = 2), no dental bleaching was performed. The color change (CC) was registered at baseline and after 2 days using the Vita Classical shade guide. Tooth sensitivity (TS) was also recorded for 2 days post-bleaching. The teeth were extracted 2 days after the clinical procedure and subjected to histological analysis. The CC and overall scores for histological evaluation were evaluated by the Kruskal-Wallis and Mann-Whitney tests. The percentage of patients with TS was evaluated by the Fisher exact test (α = 0.05). Results: The CC and TS of the HP35 group were significantly higher than those of the CONT group (p < 0.05) and the HP20 group showed an intermediate response, without significant differences from either the HP35 or CONT group (p > 0.05). In both experimental groups, the coronal pulp tissue exhibited partial necrosis associated with tertiary dentin deposition. Overall, the subjacent pulp tissue exhibited a mild inflammatory response. Conclusions: In-office bleaching therapies using bleaching gels with 20% or 35% HP caused similar pulp damage to the mandibular incisors, characterized by partial necrosis, tertiary dentin deposition, and mild inflammation.

Effects of in-office bleaching agents on polished and unpolished nanofilled resin composite.

BACKGROUND: This study investigates the effects of in-office bleaching agents on the color change and surface roughness of nanofilled resin composite finished by various polishing procedures. METHODS: The authors made 108 specimens from nanofilled resin composite, and the finishing and polishing procedures were performed with either Sof-Lex (3M ESPE) or OneGloss (Shofu). The specimens were then immersed in tea or coffee solution for 1 week, after which in-office bleaching agents were applied (n = 9). After polishing and bleaching, the surface roughness was measured with a surface profilometer. The specimen color parameters were measured with the Commission Internationale de l'Eclairage L∗a∗b∗ system in 3 stages, namely after polishing, after staining, and at the end of the bleaching procedure. The total color changes (ΔEab∗) were calculated, and ΔEab∗ not exceeding 2.7 was considered a clinically acceptable threshold. RESULTS: The highest initial roughness value was observed on surfaces polished with OneGloss. In all groups, the surface roughness increased significantly after bleaching. For the Sof-Lex group specimens stained in both tea and coffee solutions, bleaching agent Opalescence Boost (Ultradent) reduced the color change value to 2.7 or less after bleaching. CONCLUSIONS: In-office bleaching agents increased surface roughness in all groups, especially on unpolished surfaces. However, surface roughness was at an acceptable threshold for the multistep polished group, Sof-Lex, after bleaching. Nanofilled resin composite staining can be partially reduced by in-office bleaching agents but not completely removed. PRACTICAL IMPLICATIONS: To reduce the increase in surface roughness of composite restorations due to bleaching, polishing should be applied before and after bleaching.

Experimental study on the therapeutic effect of different bleaching methods on white-spot lesions of the enamel using optical coherence tomography / 口腔医学

Objective@#To investigate the efficacy of different bleaching methods on white-spot lesions of the enamel using optical coherence tomography and to evaluate its feasibility for monitoring the therapeutic effects on white-spot lesions. @*Methods@#Forty-eight sound premolars extracted for orthodontic reasons were selected and cut for 4 mm×4 mm×2 mm enamel blocks in buccal surfaces of the crowns. The samples were covered with acid-resistant varnish (except for the buccal surfaces) and immersed in demineralization solution for 18 days to establish the white-spot lesion models of the enamels. Samples were randomly divided into four groups (n=12). Group A was given demineralization only. Specimens in Group B, C and D were treated with 40% hydrogen peroxide, resin infiltration and 40% hydrogen peroxide combined with resin infiltration, respectively. Eight samples in each group were randomly selected. OCT was applied to observe the optical changes of the enamel surface and according to the OCT scanning results, the demineralization depth of enamel samples in each group was calculated. Then, the enamel blocks were embedded in epoxy resins, except the buccal surfaces, and measured for the microhardness values of the enamel surface by a microindentation hardness tester. Four samples in each group were cut longitudinally, and the ultrastructural changes of enamel samples in each group were observed by scanning electron microscope. @* Results@#OCT showed that the light scattering characteristics of enamel surface changed in all groups, and the bright layer was formed, but the thickness of bright layer in Group C and D was significantly lower than that in Group A and B (P<0.05). The microhardness values (kg/mm2) of the samples in Group A-D were (214.99±31.70), (250.66±33.64), (312.42±18.01) and(286.53±26.65), respectively. The microhardness of enamel surfaces in Group C and D was significantly higher than that in Group A and B (P<0.05), and the ultrastructure of enamel surfaces in Group C and D were more flat and dense in SEM observation (P<0.05). @*Conclusion@#The methods of resin infiltration therapy or 40% hydrogen peroxide combined with resin infiltration could effectively improve white-spot lesions of the enamel and the non-invasive OCT can be used as a better evaluation method for the diagnosis and treatment of white-spot lesions of the enamel.

Clinical comparison of diode laser- and LED-activated tooth bleaching: 9-month follow-up.

This study aims to evaluate the effect of diode laser- or LED-activated tooth bleaching on color change, tooth sensitivity(TS), temperature variation, and gingival irritation (GI) for 9 months. Thirty-five subjects having anterior teeth with a color of A2 or darker were enrolled in the study. In a split-mouth design, one side of each arch was activated by a diode laser (Epic X, Biolase), and the other side was activated by an LED (Radii Plus, SDI) in conjunction with a bleaching agent (35%, Whiteness HP). The color change was evaluated by subjective (VitaClassic/Vita3D Master Bleachguide) and objective (spectrophotometer, Vita Easyshade) methods for up to 9 months. TS and GI were assessed by visual analogue scale (VAS) and gingival index, respectively, at the same recall periods. During the bleaching, the temperature variation was also recorded using a thermocouple. Statistical analyses were performed (p < 0.05). In the color evaluation, no statistically significant difference was found between diode laser and LED (p > 0.05), except for the 6-month spectrophotometric assessment (ΔE00, ΔEab), where higher values were obtained with the laser (p < 0.05). The temperature difference and maximum temperature with diode were found to be significantly higher than LED (p < 0.05). Higher values were obtained with LED when the mean temperatures were compared (p < 0.05). There was no difference between the two activation methods in terms of TS and GI at any of the recalls (p > 0.05). The bleaching activated either with diode laser or LED performed similar clinical performance in terms of effective color change, tooth sensitivity, and gingival irritation with minimum temperature variations.

Comparative Evaluation of Esthetic Improvement of Resin Infiltration (RI), In-office Bleaching (B), Enamel Microabrasion (M) and Resin Infiltration with Double Application of Infiltrant (2RI) on Non-pitted Fluorosis Stains: A Randomized Six-month Interventional Study.

Background: Newer minimally invasive treatment options for improvement in appearance of dental fluorosis stains are gaining popularity in recent years. Objective: To evaluate and compare the clinical success in esthetic improvement of resin infiltration, in-office bleaching with 35% hydrogen peroxide, enamel microabrasion, and resin infiltration with double infiltrant application on nonpitted fluorosis stains. Materials and methods: Seventy two patients aged between 6 and 12 years with nonpitted dental fluorosis stains on the upper anterior teeth were randomly selected and divided into four interventional groups: group 1- resin infiltration (RI), group 2- in-office bleaching using 35% hydrogen peroxide (B), group 3- enamel microabrasion (M), and group 4- resin infiltration with double infiltrant application (2RI). In each group, standardized photographs were taken preoperatively, immediate postoperatively and after 1, 3, and 6 months time interval postoperatively to assess the esthetic improvement (EI) and changes in white/brown surface opacities/stains (SC) using a Visual Assessment Scale (VAS). Results: RI and 2RI showed statistically significant results (p ≤0.05) followed by microabrasion and bleaching, for both the evaluation criteria (EI and SC) at all the follow-up intervals. Conclusion: Resin infiltration is a promising procedure that demonstrated remarkable clinical success for improvement in esthetics of nonpitted fluorosis stains with stable long-term positive outcome. How to cite this article: Garg I, Kumar A, Kumar A. Comparative Evaluation of Esthetic Improvement of Resin Infiltration (RI) In-office Bleaching (B) Enamel Microabrasion (M) and Resin Infiltration with Double Application of Infiltrant (2RI) on Non-pitted Fluorosis Stains: A Randomized Six-month Interventional Study. Int J Clin Pediatr Dent 2022;15(1):20-34.

Topical application of Otosporin® before in-office bleaching: a split mouth, triple-blind, multicenter randomized clinical trial.

OBJECTIVES: To evaluate if the topical application of Otosporin® before in-office bleaching with a 35% hydrogen peroxide (HP) gel reduces the risk and intensity of tooth sensitivity (TS), as well as the bleaching effectiveness. MATERIALS AND METHODS: Twenty participants were selected for this split mouth, triple-blind, multicenter randomized clinical trial. Before each bleaching session, the placebo was applied in the patient's hemi-arch and the other half received the Otosporin®, according to the randomization procedure. Both products were applied topically for 10 min. The 35% HP was applied in two sessions with a 1-week interval. The risk and intensity of TS were assessed using the Numerical Scale (NRS) and the Visual Analog Scale (VAS). The bleaching effectiveness were evaluated with the visual scales and with a digital spectrophotometer. The absolute risk of TS was compared by McNemar's test. To compare the intensity of TS, the Wilcoxon signed-rank test was used to evaluate the NRS, while the paired t test was used to evaluate VAS. Bleaching effectiveness (ΔSGUs and ΔEab, ΔE00, and ΔWID) was compared between groups using the paired t-test (α = 0.05). RESULTS: No significant difference at risk (p = 1.0) and intensity of TS (p > 0.59; VAS and p = 1.00 for NRS) was detected between groups. For both groups, a significant bleaching was observed after 30 days of evaluation (p < 0.39). CONCLUSIONS: The previous application of Otosporin® in the in-office bleaching did not reduce the risk and intensity of TS and did not affect the effectiveness of the bleaching. CLINICAL RELEVANCE: The application of Otosporin® before in-office bleaching with 35% HP was not able to reduce the risk and intensity of TS.

An Environmental Scanning Electron Microscopy Evaluation on Comparison of Three Different Bleaching Agents using the Laser Activated in-Office Bleaching at Different Wavelengths.

BACKGROUND: Shade of the teeth is of specific significance to the patient because of social and psychological concern and hence plays vital role as primary care. Bleaching is a noninvasive, relatively inexpensive, conservative, and low-maintenance method to change a smile dramatically. AIM: To study the effect of application of three bleaching agents at different wavelengths of laser on the enamel surface of teeth using an environmental scanning electron microscopy (ESEM). MATERIALS AND METHODS: One hundred and twenty freshly extracted, noncarious intact maxillary central incisors were collected and stored in moist conditions in plastic containers. Using a randomized stratified design, the samples were divided into 12 groups (n = 10). The bleaching agent was mixed according to the manufacturer's instructions and applied on the enamel surface of the teeth followed by laser activation. The ultrastructural effects of the bleaching agent on the enamel were determined with an ESEM. Samples were assessed both before and after bleaching on the basis of the degree of surface damage. Because the observation by ESEM was designed to be qualitative, no statistical analysis was performed. RESULTS: JW power bleaching agent and Opalescence Xtra boost showed minimum surface alteration when compared to Polaoffice. Furthermore, the groups treated with diode 810 nm showed less surface damage while neodymium-doped yttrium aluminum garnet 1064 nm more surface alterations than the groups treated with diodes. CONCLUSION: From this current study, it can be concluded that the diode laser of 810 nm with JW power bleaching showed minimum surface alterations.

Impact of tooth bleaching on oral health-related quality of life in adults: A triple-blind randomised clinical trial.

OBJECTIVE: To investigate the impact of tooth bleaching on oral health-related quality of life (OHRQoL) in adults using a randomised clinical trial comparing at-home and in-office bleaching. METHOD: A total of 130 individuals were randomly allocated to two groups (n = 65) according to the type of treatment. At-home treatment was performed using 10 % carbamide peroxide (2 h/day; 3 weeks) and an in-office placebo, while 35 % hydrogen peroxide was used for in-office (1/week; 3 weeks) and an at-home placebo. Colour was assessed using the CIELAB system using a digital spectrophotometer. Objective and subjective colour change was estimated by calculating CIEDE2000 (ΔE00) and shade guide units (ΔSGU), respectively. The OHRQoL was measured using the Brazilian version of the Oral Health Impact Profile (OHIP-14). All assessments were performed at baseline and after 21 days. For bivariate analysis, the chi-square test, Student's t-test, and Wilcoxon test were used. The effects of OHRQoL were assessed using distribution-based responsiveness. RESULTS: Objective colour change was observed at home (p = 0.033), in comparison to in-office (p = 0.429). Mean OHIP-14 scores were similar between groups at baseline (p = 0.368) and after treatment (p = 0.695). Bleaching had a moderate positive effect on the OHRQoL of adults, especially with respect to the psychological discomfort domains, social disability, and total OHIP-14 score. The perception of tooth sensitivity in the group that received at-home treatment was negatively associated with OHRQoL (p = 0.037). CONCLUSION: The bleaching agents were highly effective and demonstrated a moderate influence on the patients' aesthetic perception and psychosocial impact.

A randomized clinical trial investigating three vital tooth bleaching protocols and associated efficacy, effectiveness and participants' satisfaction.

OBJECTIVES: To compare tooth colour change and participant's satisfaction following: home (HB), in-office (IOB) and combined (CB) bleaching treatments. METHODS: A group of 105 participants received HB, IOB and CB treatments. HB was performed using custom-made trays and 10 % carbamide peroxide for 14 days. IOB was performed using 37.5 % hydrogen peroxide applied in 3 cycles. CB bleaching treatment involved IOB followed by HB. Tooth colour change was assessed visually (VC-ΔVC) and using a digital spectrophotometry device (ES-ΔeVS). Participant's perception of oral health, smile and straightness and whiteness of teeth were evaluated using self-reported questionnaire. Parameters/responses were evaluated/collected prior bleaching and at recalls. Linear mixed models were used to estimate between- and within-group differences. RESULTS: CB resulted in significantly higher shade difference at 15 days recall (ΔVC and ΔeVS, all p ≤ 0.046). At 6 months recall, CB group demonstrated higher ΔeVS compared to IOB (p = 0.018) but the difference was not significant between the same groups when using VC (p = 0.051). Significant colour improvement was observed among all groups at 6 months recall (all within-group p < 0.001) except older participants (≥40 years) who received HB (ΔeVS: within-group p = 0.060). Overall, self-perception of oral health and satisfaction with smile and whiteness of teeth were significantly improved in all groups (all within-group p ≤ 0.001). Satisfaction levels with straightness of teeth were significantly improved for CB and IOB overall and in younger (<40 years) participants (all within-group p ≤ 0.013). CONCLUSION: CB treatment resulted in a pronounced colour improvement when compared to both techniques used individually. All bleaching protocols resulted in significant improvement of participants' perceived oral health and satisfaction with smile and whiteness of teeth. CLINICAL SIGNIFICANCE: Accelerated whitening can be achieved using a combination of in-office and home bleaching. Patients who may accept gradual whitening of teeth can be treated effectively using a cost-effective protocol and less concentrated bleaching agents.