Clinical validation of preoperative serum markers for liver fibrosis in living donor liver transplantation recipients.

PURPOSE: To validate the reliability of fibrosis markers as predictors of graft survival in living donor liver transplantation (LDLT) recipients. METHODS: We reviewed data retrospectively, from 163 patients who underwent adult LDLT with preoperative measurements of type IV collagen (CIV), Mac-2 binding protein glycosylation isomer (M2BPGi), and hyaluronic acid (HA). Patients were divided into high and low groups for each biomarker, based on optimal cutoff values, and graft loss within 6 months was evaluated in each group. RESULTS: The high CIV level group showed significantly lower 6-month graft survival rates and significantly higher rates of postoperative sepsis and sepsis from pneumonia. However, the groups with high and low M2BPGi levels and those with high and low HA levels did not show significant differences in 6-month graft survival rates or rates of postoperative sepsis. Multivariate analysis revealed that a CIV level ≥ 590 was a significant predictor of graft loss within 6 months, postoperative sepsis, and sepsis from pneumonia. CONCLUSION: Unlike other fibrosis markers, preoperative CIV levels can predict graft survival, postoperative sepsis, and sepsis from pneumonia after LDLT.

Kekulé Counts, Clar Numbers, and ZZ Polynomials for All Isomers of (5,6)-Fullerenes C52-C70.

We report an extensive tabulation of several important topological invariants for all the isomers of carbon (5,6)-fullerenes Cn with n = 52-70. The topological invariants (including Kekulé count, Clar count, and Clar number) are computed and reported in the form of the corresponding Zhang-Zhang (ZZ) polynomials. The ZZ polynomials appear to be distinct for each isomer cage, providing a unique label that allows for differentiation between various isomers. Several chemical applications of the computed invariants are reported. The results suggest rather weak correlation between the Kekulé count, Clar count, Clar number invariants, and isomer stability, calling into doubt the predictive power of these topological invariants in discriminating the most stable isomer of a given fullerene. The only exception is the Clar count/Kekulé count ratio, which seems to be the most important diagnostic discovered from our analysis. Stronger correlations are detected between Pauling bond orders computed from Kekulé structures (or Clar covers) and the corresponding equilibrium bond lengths determined from the optimized DFTB geometries of all 30,579 isomers of C20-C70.

Rational Molecular Design of Phenanthroimidazole-Based Fluorescent Materials toward High-Efficiency Deep-Blue OLEDs by Molecular Isomer Engineering.

Organic light-emitting diodes (OLEDs) have been extensively investigated in full-color displays and energy-saving lighting owing to their unique advantages. However, deep-blue OLEDs based on nondoped emitting layers with a satisfactory external quantum efficiency (EQE) are still rare for applications. In this work, six hot exciton materials, PPIM-12F, PPIM-22F, PPIM-13F, PPIM-23F, PPIM-1CN, and PPIM-2CN, are designed and synthesized via an isomer engineering design strategy and their photophysical properties and OLED performance are systematically investigated. These emitters all possess wide band gaps (3.53-3.69 eV), hybrid local and charge transfer (HLCT) characteristics, and good thermal stabilities. The C2 series compounds, PPIM-22F, PPIM-23F, and PPIM-2CN, all show redder emission peaks than the N1 series counterparts of PPIM-12F, PPIM-13F, and PPIM-1CN. In addition, the LUMO energy levels decrease consecutively in the sequence of PPIM-22F < PPIM-23F < PPIM-2CN and are all lower than their respective N1 series position isomers of PPIM-12F, PPIM-13F, and PPIM-1CN. The CV measurements indicate that such a design strategy renders the fine-tuning of LUMO energy levels, and the incorporation of electron acceptors at the extended C2 position of the PI unit is a better choice to improve the electron injection ability. Theoretical simulations indicate that they may harvest the triplet exciton through an upper-level reverse intersystem crossing process, which decreases the gathering of triplet excitons and allows the OLEDs to be fabricated by nondoping technology. Among them, PPIM-22F with a difluorobenzene substituent at the C2 position manifests the best performance in OLEDs, which exhibits the maximum EQE of 7.87% and Commission Internationale de lEclairage (CIE) coordinates of (0.16, 0.10). This work demonstrates an effective strategy for considerable improvement in device performance by a subtle change in the molecular structure through isomer engineering.

Hepatic Mac2-BP expression depends on liver fibrosis and inflammation due to fat accumulation in patients with metabolic dysfunction-associated steatotic liver disease.

AIM: Data on the upregulation of Mac-2 binding protein (M2BP) expression associated with fat accumulation in the liver are limited. Therefore, we aimed to assess the relationship between hepatic M2BP expression and changes in the liver microenvironment due to fat accumulation in patients with metabolic dysfunction associated steatotic liver disease (MASLD). METHODS: Liver specimens obtained from 46 patients with MASLD were subjected to immunohistochemical staining to visualize M2BP expression in the liver. The staining intensity in the hepatocytes and sinusoidal cells was classified as high or low grade. First, the correlation between hepatic M2BP expression and microenvironmental changes caused by fat accumulation was examined. Then, the influence of hepatic M2BP expression on serum M2BP glycosylation isomer levels in patients with MASLD was evaluated. RESULTS: The staining grade of M2BP was higher in the sinusoidal cells than in the hepatocytes (p = 0.015). The patients with high staining grade in their hepatocytes had more severe lobular inflammation than those with low staining grade (p = 0.037). Additionally, the patients with high staining grade in their sinusoidal cells presented more severe fibrosis than those with low staining grade (p = 0.018). The staining grade in the hepatocytes correlated positively with serum M2BP glycosylation isomer levels (p = 0.023), whereas no correlation was observed between sinusoidal staining grade and serum M2BP glycosylation isomer levels (p = 0.393). CONCLUSIONS: Fat accumulation in patients with MASLD leads to M2BP expression in hepatocytes due to liver inflammation and that in sinusoidal cells due to fibrosis.

Isomer of per- and polyfluoroalkyl substances and red blood cell indices in adults: The Isomers of C8 Health Project in China.

This study aimed to explore the isomer-specific, sex-specific, and joint associations of PFAS and red blood cell indices. We used data of 1,238 adults from the Isomers of C8 Health Project in China. Associations of PFAS isomers and red blood cell indices were explored using multiple linear regression models, Bayesian Kernel Machine Regression models and subgroup analysis across sex. We found that serum concentration of linear (n-) and branched (Br-) isomers of perfluorooctane sulfonate (PFOS) and perfluorohexanesulfonic acid (PFHxS) were significantly associated with red blood cell indices in single-pollutant models, with stronger associations observed for n-PFHxS than Br-PFHxS, in women than in men. For instance, the estimated percentage change in hemoglobin concentration for n-PFHxS (3.65%; 95% CI: 2.95%, 4.34%) was larger than that for Br-PFHxS (0.96%; 95% CI: 0.52%, 1.40%). The estimated percentage change in red blood cell count for n-PFHxS in women (2.55%; 95% CI: 1.81%, 3.28%) was significantly higher than that in men (0.12%; 95% CI: -1.04%, 1.29%) (Pinter < 0.001). Similarly, sex-specific positive association of PFAS mixture and outcomes was observed. Therefore, the structure, susceptive population, and joint effect of PFAS isomers should be taken into consideration when evaluating the health risk of chemicals.

Understanding isotopes, isomers, and isobars in mass spectrometry.

Mass spectrometry (MS) is a versatile analytical tool used in various fields such as biochemistry, pharmacology, omics, and clinical analysis for determining and quantifying compounds based on their molecular mass and structure through the mass-to-charge ratio. While MS offers high specificity and selectivity, it encounters challenges including matrix effects, in-source fragmentation, and other interferences caused by natural isotopic abundance, as well as isomeric and isobaric compounds. These challenges can impede accurate qualitative and quantitative analysis. Visual aids such as graphical illustrations can help elucidate the chemical differences and similarities among isotopes, isomers, and isobaric compounds.

Preparation of two amphiphilic dendritic small molecule gelators based on poly (aryl ether) modified silica-based chromatographic stationary phases and molecular shape recognition for shape-restricted isomers.

Geometric isomers tend to have similar polarities and differ only in molecular shape. Vigorously developing new stationary phases to meet the requirements for the separation of isomers that have similar physicochemical properties is still an urgent topic in separation science. Poly (arylene ether)-based dendrimers are known for their multifunctional branched peripheral structures and high self-assembly properties. In this paper, two amphiphilic dendritic organic small molecule gelling agents based on poly (aryl ether), PAE-ANT and PAE-PA, were prepared and conjugated to the silica surface. SiO2@PAE-ANT and SiO2@PAE-PA were used as HPLC stationary phases for the separation of non-polar shape-restricted isomers. Both stationary phases have very high molecular shape selectivity for isomers such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), tocopherols and carotenoids. Separation of cis-trans geometric isomers such as diethylstilbestrol and polar compounds such as monosubstituted benzenes and anilines can also be achieved. These two columns offer more flexible selectivity and higher separation performance than commercial C18 and phenyl columns. There is a difference in molecular shape selectivity between the two stationary phases for the same analyte test probes. SiO2@PAE-ANT showed slightly better linear selectivity for non-polar shape-restricted isomers compared to SiO2@PAE-PA with Janus-type PAE-PA bonding phase. This separation behavior may be attributed to the ordered spatial structure formed by the gel factor on the surface of the stationary phase and the combined effect of multiple weak interaction centers (hydrophobic, hydrophilic, hydrogen bonding and π-π interactions). It was also possible to separate nucleoside and nucleobase strongly polar compounds well in the HILIC mode, suggesting that hydrophilic groups in PAE-ANT and PAE-PA are involved in the interactions, reflecting their amphiphilic nature. The results show that the ordered gelation of dendritic organic small molecule gelators on the SiO2 surface, along with multiple carbonyl-π, π-π and other interactions, play a crucial role in the separating shape-restricted isomers. The integrated and ordered functional groups serve as the primary driving force behind the exceptionally high molecular shape selectivity of SiO2@PAE-ANT and SiO2@PAE-PA phases. Alterations in the structure of dendritic organic small molecule gelators can impact both molecular orientation and recognition ability, while changes in the type of functional groups influences the separation mechanism of shape-restricted isomers.

The molecular mechanisms underlying optical isomer arbutin permeating the skin: The molecular interaction between arbutin and skin components.

Arbutin, a typical optical isomer, has garnered widespread acclaim in the whitening cosmetics for its favorable efficacy and safety. However, the molecular mechanisms underlying α-arbutin and ß-arbutin permeating across the skin have not elucidated clearly yet. Herein we aimed to unveil how α-arbutin and ß-arbutin interacted with keratin or SC lipids, further demonstrating their relationship with their drug permeability. We found that α-arbutin displayed significantly higher drug accumulation into the porcine skin than ß-arbutin within 24 h through in vitro permeation test. Moreover, α-arbutin predominantly induced the alternations of secondary structure of amide II during the drug permeation, which was favorable for α-arbutin permeation. On the contrary, ß-arbutin exhibited an observable effect on the stretching vibration of SC lipids, possessing a significantly stronger mixing energy, binding energy and compatibility with ceramide (Cer) than that of α-arbutin, which ultimately restricted its permeation. Interestingly, free fatty acids and ceramides of the SC lipids specifically utilized its oxygen atom of carboxyl group to dock the arbutin molecules, enhancing their affinity with ß-arbutin, as confirmed by molecular simulation and 13Carbon Nuclear Magnetic Resonance. Nevertheless, a favorable compatibility between α-arbutin and keratin was observed. It was emphasized that the distinct spatial configuration and opposite optical rotation of arbutin was the leading factor impacting the intermolecular force between arbutin and the SC, and resulted in a diverse drug permeation. In cellular and in vivo skin pharmacokinetic studies, α-arbutin also possessed a higher cellular uptake and topical bioavailability than ß-arbutin. This study revealed the transdermal permeation mechanisms of optical isomer arbutin at the molecular levels, providing methodological reference for the investigations of permeation behaviors of other isomers with similar spatial configuration.

Metallacyclobutadienes: Intramolecular Rearrangement from Kinetic to Thermodynamic Isomers.

Metallacyclobutadienes (MCBDs) are key intermediates of alkyne metathesis reactions. There are in principle two isomerization pathway from kinetic to thermodynamic MCBDs, intermolecular and intramolecular. However, systems that simultaneously isolate two kinds of MCBD isomers have not been achieved, thus restricting the mechanistic studies of the isomerization. Here the reactivity of a metallapentalyne that contains an M≡C bond within the aromatic ring, with alkynes to afford a series of MCBD-fused metallapentalenes is studied. In some cases, both kinetic and thermodynamic products are isolated in the same system, which has never been observed in previous MCBD reactions. Furthermore, the isomerization of MCBD-fused metallapentalenes is investigated both experimentally and theoretically, indicating that it is an intramolecular process involving a metallatetrahedrane (MTd) intermediate. This research provides experimental evidence demonstrating that one MCBD can undergo intramolecular rearrangement to transform into another.

25.71%-Efficiency FACsPbI3 Perovskite Solar Cells Enabled by A Thiourea-based Isomer.

Various isomers have been developed to regulate the morphology and reduce defects in state-of-the-art perovskite solar cells. To insight the structure-function-effect correlations for the isomerization of thiourea derivatives on the performance of the perovskite solar cells (PSCs), we developed two thiourea derivatives [(3,5-dichlorophenyl)amino]thiourea (AT) and N-(3,5-dichlorophenyl)hydrazinecarbothioamide (HB). Supported by experimental and calculated results, it was found that AT can bind with undercoordinated Pb2+ defect through synergistic interaction between N1 and C=S group with a defect formation energy of 1.818 eV, which is much higher than that from the synergistic interaction between two -NH- groups in HB and perovskite (1.015 eV). Moreover, the stronger interaction between AT and Pb2+ regulates the crystallization process of perovskite film to obtain a high-quality perovskite film with high crystallinity, large grain size, and low defect density. Consequently, the AT-treated FACsPbI3 device engenders an efficiency of 25.71% (certified as 24.66%), which is greatly higher than control (23.74%) and HB-treated FACsPbI3 devices (25.05%). The resultant device exhibits a remarkable stability for maintaining 91.0% and 95.2% of its initial efficiency after aging 2000 h in air condition or tracking at maximum power point for 1000 h, respectively.

Concerning the structures of Lewis base adducts of titanium(IV) hexafluoroisopropoxide.

The reaction of titanium(IV) chloride with sodium hexafluoroisopropoxide, carried out in hexafluoroisopropanol, produces titanium(IV) hexafluoroisopropoxide, which is a liquid at room temperature. Recrystallization from coordinating solvents, such as acetonitrile or tetrahydrofuran, results in the formation of bis-solvate complexes. These compounds are of interest as possible Ziegler-Natta polymerization catalysts. The acetonitrile complex had been structurally characterized previously and adopts a distorted octahedral structure in which the nitrile ligands adopt a cis configuration, with nitrogen lone pairs coordinated to the metal. The low-melting tetrahydrofuran complex has not provided crystals suitable for single-crystal X-ray analysis. However, the structure of chloridotris(hexafluoroisopropoxido-κO)bis(tetrahydrofuran-κO)titanium(IV), [Ti(C3HF6O)3Cl(C4H8O)2], has been obtained and adopts a distorted octahedral coordination geometry, with a facial arrangement of the alkoxide ligands and adjacent tetrahydrofuran ligands, coordinated by way of metal-oxygen polar coordinate interactions.

Spatial heterogeneity of per- and polyfluoroalkyl substances caused by glacial melting in Tibetan Lake Nam Co due to global warming.

Per- and polyfluoroalkyl substances (PFASs) in high-latitude polar regions and the Tibetan Plateau have received widespread international attention. Here, we measured 18 PFASs and 11 major isomers in the lake water, sediment, and surrounding runoff of Lake Nam Co in 2020. The concentrations of ultrashort-chain trifluoroacetic acid (TFA) and perfluoropropanoic acid (PFPrA) and major isomers of perfluoooctanoic acid (PFOA) and perfluoooctane sulfonate acid (PFOS) in water bodies in high-latitude polar regions and the Tibetan Plateau are reported for the first time. The results showed that the concentration of ∑PFASs in glacial runoff was approximately 139 % greater than that in nonglacial runoff. The concentrations of ∑PFASs in the lake water and sediment in the southern lake with multiple glacial runoff events were approximately 113 % and 108 % higher, respectively, than those in the northern lake. The concentrations of short-chain perfluorobutanoic acid (PFBA) and ultrashort-chain TFA and PFPrA, which may be indicators of ice and snow melt, exhibited significant spatial heterogeneity. Overall, the spatial heterogeneity of PFAS concentrations in the water, sediment and surrounding runoff of Lake Nam Co may be caused mainly by glacial melting.

Determination of 16 ultraviolet-absorbing compounds in marine invertebrates by using LC-USI-MS/MS coupled with QuEChERS.

In this study, we examined multiple endocrine-disrupting ultraviolet-absorbing compounds (UVACs) in marine invertebrates used in personal care products and packaging. Modified QuEChERS and liquid chromatography UniSpray ionization tandem mass spectrometry were used to identify 16 UVACs in marine invertebrates. Matrix-matched calibration curves revealed high linearity (r ≥ 0.9929), with limits of detection and quantification of 0.006-1.000 and 0.020-3.000 ng/g w.w., respectively. In oysters, intraday and interday analyses revealed acceptable accuracy (93%-120%) and precision (≤18%), except for benzophenone (BP) and ethylhexyl 4-(dimethylamino) benzoate. Analysis of 100 marine invertebrate samples revealed detection frequencies of 100%, 98%, 89%, 64%, and 100% for BP, 4-hydroxybenzophenone, 4-methylbenzophenone, 4-methylbenzylidene camphor, and benzophenone-3 (BP-3), respectively. BP and BP-3 were detected at concentrations of 4.40-27.39 and < 0.020-0.560 ng/g w.w., respectively, indicating their widespread presence. Overall, our proposed method successfully detected UVACs in marine invertebrates, raising concerns regarding their potential environmental and health effects.

Open and Closed Cage Silsesquioxane Dimers.

Polyhedral oligomeric silsesquioxane (POSS) is an organic-inorganic hybrid molecule with two structural variations, closed- and open-cage configurations, referred to as completely condensed POSS (CC-POSS) and corner-opened POSS (CO-POSS), respectively. In this study, we synthesized 12 dimers by combining CC- and CO-POSS variants decorated with isobutyl or phenyl substituents to explore their structure-property relationships. The choice of substituents, both at the cage vertices and open sites, significantly affected the thermal and optical properties of the materials. Modifying the substituents on CO- and CC-POSS, which are isomers, led to significant alterations in the material properties. Notably, isomer-bearing carbazole substituents exhibited a substantially higher quantum yield (0.32) than its counterpart isomer (0.13), underscoring the crucial role of structural nuances in determining material performance. These results offer valuable insights for the design of novel silsesquioxane-based materials.

Spectral and HPLC Analyses of Synthesized Butin and Butein.

Butin and butein are significant bioactive flavanones derived from plants, existing as tautomers of each other. However, their physicochemical attributes, such as their spectral profiles under varying experimental conditions in aqueous solutions and established chromatographic methods for distinguishing between them, remain undetermined. In this study, we determined the basic properties of butin and butein using conventional spectroscopic, reversed-phase, and chiral HPLC analyses. The spectra of the synthesized butin and butein were analyzed using a UV-Vis spectrophotometer in several solvents with different polarities as well as in aqueous solutions at various pH values. Furthermore, the behavior of the measured spectra was reproduced by calculations to reveal the effects of the solvent and pH on the spectra of butin and butein in organic and aqueous solutions. Subsequently, we assessed the structural stability of butin and butein using reversed-phase HPLC, which revealed that butein is unstable compared with butin in a general culture medium. The synthesized butin was effectively separated into R- and S-isomers with positive and negative Cotton effects, respectively, via HPLC using a chiral column. These findings will aid in uncovering the individual properties of both butin and butein that may have been concealed by their tautomerism and enable the synthesis of S-butin, which is typically challenging and time-consuming to isolate.

Serum Mac-2 binding protein glycosylation isomer dynamics in patients achieving sustained virologic response for hepatitis C virus.

BACKGROUND AND AIM: Understanding the dynamics of serum Mac-2 binding protein glycosylation isomer (M2BPGi) remains pivotal for hepatitis C virus (HCV) patients' post-sustained virologic response (SVR12) through direct-acting antivirals (DAAs). METHODS: We compared areas under receiver operating characteristic curves (AUROCs) of M2BPGi, FIB-4, and APRI and assess M2BPGi cutoff levels in predicting fibrosis stages of ≥F3 and F4 utilizing transient elastography in 638 patients. Variations in M2BPGi levels from pretreatment to SVR12 and their association with pretreatment alanine transaminase (ALT) levels and fibrosis stage were investigated. RESULTS: The AUROCs of M2BPGi were comparable to FIB-4 in predicting ≥F3 (0.914 vs 0.902, P = 0.48) and F4 (0.947 vs 0.915, P = 0.05) but were superior to APRI in predicting ≥F3 (0.914 vs 0.851, P = 0.001) and F4 (0.947 vs 0.857, P < 0.001). Using M2BPGi cutoff values of 2.83 and 3.98, fibrosis stages of ≥F3 and F4 were confirmed with a positive likelihood ratio ≥10. The median M2BPGi change was -0.55. Patients with ALT levels ≥5 times ULN or ≥F3 demonstrated more pronounced median decreases in M2BPGi level compared to those with ALT levels 2-5 times ULN and <2 times ULN (-0.97 vs -0.68 and -0.44; P < 0.001) or with < F3 (-1.52 vs -0.44; P < 0.001). CONCLUSIONS: Serum M2BPGi is a reliable marker for advanced hepatic fibrosis. Following viral clearance, there is a notable M2BPGi decrease, with the extent of reduction influenced by ALT levels and fibrosis stage.

Filling the gaps in peptide maps with a platform assay for top-down characterization of purified protein samples.

Liquid chromatography-mass spectrometry (LC-MS) intact mass analysis and LC-MS/MS peptide mapping are decisional assays for developing biological drugs and other commercial protein products. Certain PTM types, such as truncation and oxidation, increase the difficulty of precise proteoform characterization owing to inherent limitations in peptide and intact protein analyses. Top-down MS (TDMS) can resolve this ambiguity via fragmentation of specific proteoforms. We leveraged the strengths of flow-programmed (fp) denaturing online buffer exchange (dOBE) chromatography, including robust automation, relatively high ESI sensitivity, and long MS/MS window time, to support a TDMS platform for industrial protein characterization. We tested data-dependent (DDA) and targeted strategies using 14 different MS/MS scan types featuring combinations of collisional- and electron-based fragmentation as well as proton transfer charge reduction. This large, focused dataset was processed using a new software platform, named TDAcquireX, that improves proteoform characterization through TDMS data aggregation. A DDA-based workflow provided objective identification of αLac truncation proteoforms with a two-termini clipping search. A targeted TDMS workflow facilitated the characterization of αLac oxidation positional isomers. This strategy relied on using sliding window-based fragment ion deconvolution to generate composite proteoform spectral match (cPrSM) results amenable to fragment noise filtering, which is a fundamental enhancement relevant to TDMS applications generally.

Accumulation of Per- and Polyfluoroalkyl Substances (PFAS) in Coastal Sharks from Contrasting Marine Environments: The New York Bight and The Bahamas.

Per- and polyfluoroalkyl substances (PFAS) enter the marine food web, accumulate in organisms, and potentially have adverse effects on predators and consumers of seafood. However, evaluations of PFAS in meso-to-apex predators, like sharks, are scarce. This study investigated PFAS occurrence in five shark species from two marine ecosystems with contrasting relative human population densities, the New York Bight (NYB) and the coastal waters of The Bahamas archipelago. The total detected PFAS (∑PFAS) concentrations in muscle tissue ranged from 1.10 to 58.5 ng g-1 wet weight, and perfluorocarboxylic acids (PFCAs) were dominant. Fewer PFAS were detected in Caribbean reef sharks (Carcharhinus perezi) from The Bahamas, and concentrations of those detected were, on average, ∼79% lower than in the NYB sharks. In the NYB, ∑PFAS concentrations followed: common thresher (Alopias vulpinus) > shortfin mako (Isurus oxyrinchus) > sandbar (Carcharhinus plumbeus) > smooth dogfish (Mustelus canis). PFAS precursors/intermediates, such as 2H,2H,3H,3H-perfluorodecanoic acid and perfluorooctanesulfonamide, were only detected in the NYB sharks, suggesting higher ambient concentrations and diversity of PFAS sources in this region. Ultralong-chain PFAS (C ≥ 10) were positively correlated with nitrogen isotope values (δ15N) and total mercury in some species. Our results provide some of the first baseline information on PFAS concentrations in shark species from the northwest Atlantic Ocean, and correlations between PFAS, stable isotopes, and mercury further contextualize the drivers of PFAS occurrence.

Successively Controlling Nanoscale Wrinkles of Ultrathin 2D Metal-Organic Framework Nanosheets.

The wrinkles are pervasive in ultrathin two-dimensional (2D) materials, but the regulation of wrinkles is rarely explored systematically. However, the regulation of wrinkles at nanometer scale is merely explored. Here, we employed a series of carboxylic acids (from formic acid to octanoic acid) to control the wrinkles of Zr-BTB (BTB = 1, 3, 5-(4-carboxylphenyl)-benzene) metal-organic framework (MOF) nanosheet. The wrinkles at the micrometer scale were observed with transmission electron microscopy. Furthermore, high-angle annular dark-field (HAADF) images showed lattice distortion in many nanoscale regions, which was precisely matched to the nano-wrinkles. With the changes of hydrophilicity/hydrophobicity, MOF-MOF and MOF-solvent interactions were synergistically regulated and wrinkles with different sizes were obtained, which was supported by HAADF, molecular dynamics and density functional theory calculation. Different wrinkle sizes resulted in different pore sizes between the Zr-BTB nanosheet interlayers, providing highly-oriented thin films and the successive optimization of kinetic diffusion pathways, proved by grazing-incidence wide-angle X-ray scattering and nitrogen adsorption. The most suitable wrinkle pore from Zr-BTB-C4 exhibited highly efficient chromatographic separation of the substituted benzene isomers. Our work provides a rational route for the modulation of nanoscale wrinkles and their stacked pores of MOF nanosheets and improves the separation abilities of MOFs.