Use of a diagnostic Puumala virus real-time RT-PCR in an orthohantavirus endemic region in the Netherlands.

Laboratory diagnosis of orthohantavirus infection is primarily based on serology. However, for a confirmed serological diagnosis, evaluation of a follow-up serum sample is essential, which is time consuming and causes delay. Real-time reverse transcription polymerase chain reaction (RT-PCR) tests, if positive, provide an immediate and definitive diagnosis, and accurately identify the causative agent, where the discriminative nature of serology is suboptimal. We re-evaluated sera from orthohantavirus-suspected clinical cases in the Dutch regions of Twente and Achterhoek from July 2014 to April 2016 for the presence of Puumala orthohantavirus (PUUV), Tula orthohantavirus (TULV), and Seoul orthohantavirus (SEOV) RNA. PUUV RNA was detected in 11% of the total number (n = 85) of sera tested, in 50% of sera positive for anti-PUUV/TULV IgM (n = 16), and in 1.4% of sera negative or indeterminate for anti-PUUV/TULV IgM (n = 69). No evidence was found for the presence of TULV or SEOV viral RNA. Based on these findings, we propose two algorithms to implement real-time RT-PCR testing in routine orthohantavirus diagnostics, which optimally provide clinicians with early confirmed diagnoses and could prevent possible further invasive testing and treatment. IMPORTANCE: The addition of a real-time reverse transcription polymerase chain reaction test to routine orthohantavirus diagnostics may better aid clinical decision making than the use of standard serology tests alone. Awareness by clinicians and clinical microbiologists of this advantage may ultimately lead to a reduction in over-hospitalization and unnecessary invasive diagnostic procedures.

Performance evaluation of loop-mediated isothermal amplification, polymerase chain reaction and real-time polymerase chain reaction methods to detect Neisseria gonorrhoeae among symptomatic patients from India.

Background: Neisseria gonorrhoeae is one of the most important causative organisms in causing sexually transmitted infections. The clinical presentation of gonorrhoea mimics the symptoms of other sexually transmitted infections, and a proper diagnosis of the same is therefore crucial in patient management. The current study intended to compare different in-house molecular methods: that is, conventional PCR, real-time PCR, and LAMP assay for detection of N. gonorrhoeae. Methods: A total of 163 samples were collected from 145 patients who presented with urethral and vaginal discharge. Collected samples were processed for culture on GC agar base, and three different molecular diagnostic tests (conventional PCR, real-time PCR, and LAMP assay) were performed simultaneously on all the samples. Results: Culture of N. gonorrhoeae was positive in 17 out of 21 (80.9%) swab samples. With culture as the gold standard method, conventional and real-time PCR had a sensitivity of 94.1%, whereas the sensitivity of the LAMP assay was found to be 88.2%. All three methods had a specificity of 100%. In addition to swab samples, evaluation of urine samples by different molecular methods yielded a good concordance with a kappa value of 0.85 by conventional PCR and real-time PCR showing a perfect level of agreement, while the LAMP assay was found to have a substantial level of agreement. Conclusion: LAMP assay had a comparable diagnostic accuracy to other molecular methods for the detection of N. gonorrhoeae and can be used as a point-of-care test in resource-limited settings.

Molecular Characterization of Klebsiella pneumoniae Clinical Isolates Through Whole-Genome Sequencing: A Comprehensive Analysis of Serotypes, Sequence Types, and Antimicrobial and Virulence Genes.

Introduction Antimicrobial resistance (AMR) has become a menace, spreading among bacterial species globally. AMR is now recognized as a silent pandemic responsible for treatment failures. Therefore, an effective surveillance mechanism is warranted to understand the bacterial species isolated from human clinical specimens. The present study employed next-generation sequencing (NGS) or whole-genome sequencing (WGS) to identify the resistance and virulence genes, sequence type, and serotypes. Methods This study included 18 multidrug-resistant (MDR) Klebsiella pneumoniae (K. pneumoniae) isolates obtained from patients suffering from different infections attending the Prathima Institute of Medical Sciences, Karimnagar, India. All isolates were identified, and antimicrobial susceptibility profiles were determined through conventional microbiological techniques and confirmed by automated systems. All the isolates were investigated using NGS or WGS to identify the genes coding for resistance, such as extended-spectrum beta-lactamases (ESBLs), metallo-beta-lactamases, and virulence genes. Multilocus sequence typing (MLST) was conducted to identify the sequence types, and Kleborate analysis was performed to confirm the species, genes for AMR, and virulence and evaluate the capsular polysaccharide (KL) and cell wall/lipopolysaccharide (O) serotypes carried by the isolates. Results The mean age of the patients was 46.11±20.35 years. Among the patients included, 12 (66.66%) were males and 6 (33.33%) were females. A high percentage (>50%) of hypervirulent K. pneumoniae (hvKp) strains that had genes coding for AMR and plasmids having the potential to carry blaNDM and resistance genes were observed. Among the isolates, 16 (88.88%) revealed the presence of multiple antibiotic-resistant genes with evidence of at least one gene coding for beta-lactamase resistance. There was a high prevalence of blaSHV (17/18; 94.44%) and blaCTX-M-15 (16/18; 88.88%) AMR genes. Other AMR genes identified included blaTEM (83.33%; 15/18) and blaOXA (14/18; 77.77%). Two (11.11%) strains each showed the presence of blaNDM-1 and blaNDM-5 genes. The virulence genes identified included gapA, infB, mdh, pgi, phoE, rpoB, tonB, and ybt. The most frequent K. pneumoniae serotypes found were KL51:O1v2 (3/18, 16.66%), KL17:O1v1 (3/18, 16.66%), and KL64:O2v1 (3/18, 16.66%). KL64 (4/18; 22.22%) was the most common capsular serotype identified among the isolates. The most frequent MLST-based sequence type (ST) identified included ST-147 (5/18, 27.77%), followed by ST-231 (3/18, 16.66%) and ST-101 (2/18, 11.11%). Conclusions The molecular analysis of K. pneumoniae isolates revealed multiple AMR, plasmid, and virulence genes. Additionally, many global STs were noticed by MLST. The results noted a high prevalence of hvKp strains. Molecular characterization of bacterial strains using NGS/WGS is important to understand the epidemiology of bacterial strains and the antibiotic resistance and virulence genes they are potentially carrying. The data obtained from this study may be utilized to devise careful antibiotic-prescribing approaches and improve patient management practices.

Validation of a qualitative real-time PCR assay for the detection of Candida auris in hospital inpatient screening.

Candida auris is a multidrug-resistant opportunistic fungal pathogen capable of causing serious infections and healthcare-associated outbreaks. Screening for colonization with C. auris has become routine and is recommended in many hospitals and healthcare facilities as an infection control and prevention strategy. Subsequently, and since there are currently no FDA-approved tests for this purpose, clinical microbiology laboratories have become responsible for developing protocols to detect C. auris using axial and inguinal screening swabs. In a College of American Pathologists-accredited large academic healthcare center setting, we implemented a laboratory-developed nucleic-acid amplification test for the detection of C. auris DNA. Our test validation evaluated the performance of the DiaSorin C. auris primer set used in a real-time qualitative PCR assay on the LIAISON MDX thermocycler with the Simplexa Universal Disc. The assay was highly sensitive and specific, with a limit of detection of 1-2 CFU/reaction, with no observed cross-reactivity with other Candida spp., bacterial skin commensal organisms or commonly encountered viruses. When run in parallel with a culture-based detection method, the PCR assay was 100% sensitive and specific. The assay was precise, with low variability between replicates within and between runs. Lastly, pre-analytical factors, including swab storage time, temperature, and transport media, were assessed and found to have no significant effect on the detection of C. auris at variable concentrations. Taken together, this study expands the available options for nucleic acid detection of C. auris and characterizes pre-analytical factors for implementation in both high- and low-volume laboratory settings. IMPORTANCE: This study overviews the validation and implementation of a molecular screening tool for the detection of Candida auris in a College of American Pathologist-accredited clinical laboratory. This molecular laboratory-developed test is both highly sensitive and specific and has significant health-system cost-savings associated with significantly reduced turn-around-time compared to traditional standard-of-care culture-based work up. This method and workflow is of interest to support clinical microbiology diagnostics and to help aid in hospital inpatient, and infection prevention control screening.

Diagnosis of bovine viral diarrhea virus: an overview of currently available methods.

Bovine viral diarrhea virus (BVDV) is the causative agent of bovine viral diarrhea (BVD), which results in significant economic losses in the global cattle industry. Fortunately, various diagnostic methods available for BVDV have been established. They include etiological methods, such as virus isolation (VI); serological methods, such as enzyme-linked immunosorbent assay (ELISA), immunofluorescence assay (IFA), and immunohistochemistry (IHC); molecular methods, such as reverse transcription-polymerase chain reaction (RT-PCR), real-time PCR, digital droplet PCR (ddPCR), loop-mediated isothermal amplification (LAMP), recombinase polymerase amplification (RPA), and CRISPR-Cas system; and biosensors. This review summarizes the current diagnostic methods for BVDV, discussing their advantages and disadvantages, and proposes future perspectives for the diagnosis of BVDV, with the intention of providing valuable guidance for effective diagnosis and control of BVD disease.

Monitoring ESBL-Escherichia coli in Swiss wastewater between November 2021 and November 2022: insights into population carriage.

Antimicrobial resistance (AMR) poses a global health threat, causing millions of deaths annually, with expectations of increased impact in the future. Wastewater surveillance offers a cost-effective, non-invasive tool to understand AMR carriage trends within a population. We monitored extended-spectrum ß-lactamase producing Escherichia coli (ESBL-E. coli) weekly in influent wastewater from six wastewater treatment plants (WWTPs) in Switzerland (November 2021 to November 2022) to investigate spatio-temporal variations, explore correlations with environmental variables, develop a predictive model for ESBL-E. coli carriage in the community, and detect the most prevalent ESBL-genes. We cultured total and ESBL-E. coli in 300 wastewater samples to quantify daily loads and percentage of ESBL-E. coli. Additionally, we screened 234 ESBL-E. coli isolates using molecular methods for the presence of 18 ESBL-gene families. We found a population-weighted mean percentage of ESBL-E. coli of 1.9% (95% confidence interval: 1.8-2%) across all sites and weeks, which can inform ESBL-E. coli carriage. Concentrations of ESBL-E. coli varied across WWTPs and time, with higher values observed in WWTPs serving larger populations. Recent precipitations (previous 24/96 h) showed no significant association with ESBL-E. coli, while temperature occasionally had a moderate impact (P < 0.05, correlation coefficients approximately 0.40) in some locations. We identified blaCTX-M-1, blaCTX-M-9, and blaTEM as the predominant ESBL-gene families. Our study demonstrates that wastewater-based surveillance of culturable ESBL-E. coli provides insights into AMR trends in Switzerland and may also inform resistance. These findings establish a foundation for long term, nationally established monitoring protocols and provide information that may help inform targeted public health interventions. IMPORTANCE: Antimicrobial resistance (AMR) is a global health threat and is commonly monitored in clinical settings, given its association with the risk of antimicrobial-resistant infections. Nevertheless, tracking AMR within a community proves challenging due to the substantial sample size required for a representative population, along with high associated costs and privacy concerns. By investigating high resolution temporal and geographic trends in extended-spectrum beta-lactamase producing Escherichia coli in wastewater, we provide an alternative approach to monitor AMR dynamics, distinct from the conventional clinical settings focus. Through this approach, we develop a mechanistic model, shedding light on the relationship between wastewater indicators and AMR carriage in the population. This perspective contributes valuable insights into trends of AMR carriage, emphasizing the importance of wastewater surveillance in informing effective public health interventions.

Comparison of rectal swabs and fecal samples for the detection of Clostridioides difficile infections with a new in-house PCR assay.

The detection of Clostridioides difficile infections (CDI) relies on testing the stool of patients by toxin antigen detection or PCR methods. Although PCR and antigenic methods have significantly reduced the time to results, delays in stool collection can significantly add to the turnaround time. The use of rectal swabs to detect C. difficile could considerably reduce the time to diagnosis of CDI. We developed a new rapid PCR assay for the detection of C. difficile and evaluated this PCR assay on both stool and rectal swab specimens. We recruited a total of 623 patients suspected of C. difficile infection. Stool samples and rectal swabs were collected from each patient and tested by our PCR assay. Stool samples were also tested by the cell cytotoxicity neutralization assay (CCNA) as a reference. The PCR assay detected C. difficile in 60 stool specimens and 61 rectal swabs for the 64 patients whose stool samples were positive for C. difficile by CCNA. The PCR assay detected an additional 35 and 36 stool and rectal swab specimens positive for C. difficile, respectively, for sensitivity with stools and rectal swabs of 93.8% and 95.3%, specificity of 93.7% and 93.6%, positive predictive values of 63.2% and 62.9%, and negative predictive values of 99.2% and 99.4%. Detection of C. difficile using PCR on stools or rectal swabs yielded reliable and similar results. The use of PCR tests on rectal swabs could reduce turnaround time for CDI detection, thus improving CDI management and control of C. difficile transmission. IMPORTANCE: Clostridioides difficile infection (CDI) is the leading cause of healthcare-associated diarrhea, resulting in high morbidity, mortality, and economic burden. In clinical laboratories, CDI testing is currently performed on stool samples collected from patients with diarrhea. However, the diagnosis of CDI can be delayed by the time required to collect stool samples. Barriers to sample collection could be overcome by using a rectal swab instead of a stool sample. Our study showed that CDI can be identified rapidly and reliably by a new PCR assay developed in our laboratory on both stool and rectal swab specimens. The use of PCR tests on rectal swabs could reduce the time for the detection of CDI and improve the management of this infection. It should also provide a useful alternative for infection-control practitioners to better control the spread of C. difficile.

A Molecular Approach for Detecting Bacteria and Fungi in Healthcare Environment Aerosols: A Systematic Review.

Molecular methods have become integral to microbiological research for microbial identification. This literature review focuses on the application of molecular methods in examining airborne bacteria and fungi in healthcare facilities. In January 2024, a comprehensive electronic search was carried out in esteemed databases including PubMed, Web of Science, and Scopus, employing carefully selected keywords such as ((bacteria) OR (virus) OR (fungi)) AND (aerosol) AND ((hospital) OR (healthcare) OR (dental office)) AND ((molecular) OR (PCR) OR (NGS) OR (RNA) OR (DNA) OR (metagenomic) OR (microarray)), following the PRISMA protocol. The review specifically targets healthcare environments with elevated concentrations of pathogenic bacteria. A total of 487 articles were initially identified, but only 13 met the inclusion criteria and were included in the review. The study disclosed that the prevalent molecular methodology for appraising aerosol quality encompassed the utilization of the PCR method, incorporating either 16S rRNA (bacteria) or 18S rRNA (fungi) amplification techniques. Notably, five diverse molecular techniques, specifically PFGE, DGGE, SBT, LAMP, and DNA hybridization methods, were implemented in five distinct studies. These molecular tests exhibited superior capabilities compared to traditional bacterial and fungal cultures, providing precise strain identification. Additionally, the molecular methods allowed the detection of gene sequences associated with antibiotic resistance. In conclusion, molecular testing offers significant advantages over classical microbiological culture, providing more comprehensive information.

Development of advanced control material for reverse transcription-mediated bacterial nucleic acid amplification tests.

Detection of bacterial RNA by nucleic acid amplification tests (NAATs), such as reverse transcription PCR (RT-PCR) and reverse transcription loop-mediated isothermal amplification (RT-LAMP), offers distinct advantages over DNA-based methods. However, such assays also present challenges in ascertaining positive and internal control material that can reliably monitor success over all phases of testing (bacterial lysis, nucleic acid recovery, reverse transcription, amplification, and signal detection): since they are unable to distinguish between amplification of bacterial RNA transcripts and the DNA templates that encode them, using intact organisms as controls can inform cell lysis but not successful detection of RNA. We developed a control strategy for RNA-based bacterial NAATs that allows ready discrimination of RNA from DNA templates using self-splicing bacterial introns, such that those nucleic acids ultimately encode different sequences. We engineered two vectors encoding synthetic transgenes based on this principle, one that is active in the Gram-negative bacterium Escherichia coli and one that functions in both E. coli and the Gram-positive organism Staphylococcus aureus. We subsequently designed RT-LAMP assays that either target RNA and DNA from transgenic organisms or target RNA exclusively and demonstrated the specificity of amplification using purified nucleic acids. Using multiplex fluorescent RT-LAMP of heat-lysed specimens, we showed the practicality of deploying such transgenic organisms as an internal control to ascertain sample integrity and assay performance during clinical diagnostic testing. Our approach has broad utility for RNA-based bacterial NAATs, especially point-of-care assays and other applications where nucleic acids are nonspecifically liberated for testing.

Current approaches to genetic modification of marine bacteria and considerations for improved transformation efficiency.

Marine bacteria play vital roles in symbiosis, biogeochemical cycles and produce novel bioactive compounds and enzymes of interest for the pharmaceutical, biofuel and biotechnology industries. At present, investigations into marine bacterial functions and their products are primarily based on phenotypic observations, -omic type approaches and heterologous gene expression. To advance our understanding of marine bacteria and harness their full potential for industry application, it is critical that we have the appropriate tools and resources to genetically manipulate them in situ. However, current genetic tools that are largely designed for model organisms such as E. coli, produce low transformation efficiencies or have no transfer ability in marine bacteria. To improve genetic manipulation applications for marine bacteria, we need to improve transformation methods such as conjugation and electroporation in addition to identifying more marine broad host range plasmids. In this review, we aim to outline the reported methods of transformation for marine bacteria and discuss the considerations for each approach in the context of improving efficiency. In addition, we further discuss marine plasmids and future research areas including CRISPR tools and their potential applications for marine bacteria.

Studying Microbial Ecology of Diabetic Foot Infections: Significance of PCR Analysis for Prudent Antimicrobial Stewardship.

This study presents a comprehensive investigation into the microbial ecology of diabetic foot infections (DFIs), using molecular-polymerase chain reaction (PCR) analysis to accurately identify the causative agents. One hundred DFI patients were recruited and classified using the Depth Extent Phase and Associated Etiology (DEPA) score according to their severity. Results revealed polymicrobial infections in 75% of cases, predominantly featuring Staphylococcus epidermidis (83%) and Staphylococcus aureus (63%). Importantly, 20% of samples exhibited facultative anaerobes Bacteroides fragilis or Clostridium perfringens, exclusively in high DEPA score ulcers. Candida albicans coinfection was identified in 19.2% of cases, underscoring the need for mycological evaluation. Empirical antimicrobial therapy regimens were tailored to DEPA severity, yet our findings highlighted a potential gap in methicillin-resistant Staphylococcus aureus (MRSA) coverage. Despite an 88% prevalence of methicillin-resistant Staphylococci, vancomycin usage was suboptimal. This raises concerns about the underestimation of MRSA risk and the need for tailored antibiotic guidelines. Our study demonstrates the efficacy of molecular-PCR analysis in identifying diverse microbial communities in DFIs, influencing targeted antibiotic choices. The results advocate for refined antimicrobial guidelines, considering regional variations in microbial patterns and judiciously addressing multidrug-resistant strains. This research contributes crucial insights for optimizing DFIs management and helps the physicians to have a fast decision in selection the suitable antibiotic for each patient and to decrease the risk of bacterial resistance from the improper use of broad-spectrum empirical therapies.

Application of Advanced Molecular Methods to Study Early-Onset Neonatal Sepsis.

Early-onset sepsis (EOS) is a global health issue, considered one of the primary causes of neonatal mortality. Diagnosis of EOS is challenging because its clinical signs are nonspecific, and blood culture, which is the current gold-standard diagnostic tool, has low sensitivity. Commonly used biomarkers for sepsis diagnosis, including C-reactive protein, procalcitonin, and interleukin-6, lack specificity for infection. Due to the disadvantages of blood culture and other common biomarkers, ongoing efforts are directed towards identifying innovative molecular approaches to diagnose neonates at risk of sepsis. This review aims to gather knowledge and recent research on these emerging molecular methods. PCR-based techniques and unrestricted techniques based on 16S rRNA sequencing and 16S-23S rRNA gene interspace region sequencing offer several advantages. Despite their potential, these approaches are not able to replace blood cultures due to several limitations; however, they may prove valuable as complementary tests in neonatal sepsis diagnosis. Several microRNAs have been evaluated and have been proposed as diagnostic biomarkers in EOS. T2 magnetic resonance and bioinformatic analysis have proposed potential biomarkers of neonatal sepsis, though further studies are essential to validate these findings.

The Laboratory Diagnosis of Malaria: A Focus on the Diagnostic Assays in Non-Endemic Areas.

Even if malaria is rare in Europe, it is a medical emergency and programs for its control should ensure both an early diagnosis and a prompt treatment within 24-48 h from the onset of the symptoms. The increasing number of imported malaria cases as well as the risk of the reintroduction of autochthonous cases encouraged laboratories in non-endemic countries to adopt diagnostic methods/algorithms. Microscopy remains the gold standard, but with limitations. Rapid diagnostic tests have greatly expanded the ability to diagnose malaria for rapid results due to simplicity and low cost, but they lack sensitivity and specificity. PCR-based assays provide more relevant information but need well-trained technicians. As reported in the World Health Organization Global Technical Strategy for Malaria 2016-2030, the development of point-of-care testing is important for the improvement of diagnosis with beneficial consequences for prompt/accurate treatment and for preventing the spread of the disease. Despite their limitations, diagnostic methods contribute to the decline of malaria mortality. Recently, evidence suggested that artificial intelligence could be utilized for assisting pathologists in malaria diagnosis.

Challenges for estimating human norovirus infectivity by viability RT-qPCR as compared to replication in human intestinal enteroids.

Viability RT-qPCR, a molecular detection method combining viability marker pre-treatment with RT-qPCR, has been proposed to infer infectivity of viruses which is particularly relevant for non-culturable viruses or sophisticated cell culture systems. Being human noroviruses (HuNoV) most frequently associated with foodborne outbreaks, this study compared different viability techniques and infectivity in human intestinal enteroids (HIE) to ultimately determine whether the molecular approaches could serve as rapid assays to predict HuNoV inactivation in high-risk food. To this end, the performance of three viability RT-qPCR assays with different intercalating markers ((Viability PCR Crosslinker Kit (CL), propidium monoazide (PMAxx™), and platinum chloride (PtCl4)) in estimating survival of HuNoV exposed to thermal and high pressure (HPP) treatments was compared to replication tested in the HIE cell culture model. A nearly full-length genomic molecular assay coupled with PMAxx™ to infer HuNoV thermal inactivation was also assessed. The experimental design included HuNoV genogroup I.3 [P13], GII.4 Sydney [P16], GII.6 [P7], along with Tulane virus (TV) serving as surrogate. Finally, viability RT-qPCR was tested in HPP-treated strawberry puree, selected as a food matrix with high viral contamination risk. PMAxx™ and CL performed evenly, while PtCl4 affected HuNoV infectivity. Taking all experimental data together, viability RT-qPCR was demonstrated to be an improved method over direct RT-qPCR to estimate viral inactivation at extreme thermal (95 °C) and HPP (450 MPa) exposures, but not under milder conditions as amplification signals were detected. Despite its complexity and limitations, the HIE demonstrated a more robust model than viability RT-qPCR to assess HuNoV infectivity.

Detection of Anopheles stephensi Mosquitoes by Molecular Surveillance, Kenya.

The Anopheles stephensi mosquito is an invasive malaria vector recently reported in Djibouti, Ethiopia, Sudan, Somalia, Nigeria, and Ghana. The World Health Organization has called on countries in Africa to increase surveillance efforts to detect and report this vector and institute appropriate and effective control mechanisms. In Kenya, the Division of National Malaria Program conducted entomological surveillance in counties at risk for An. stephensi mosquito invasion. In addition, the Kenya Medical Research Institute conducted molecular surveillance of all sampled Anopheles mosquitoes from other studies to identify An. stephensi mosquitoes. We report the detection and confirmation of An. stephensi mosquitoes in Marsabit and Turkana Counties by using endpoint PCR and morphological and sequence identification. We demonstrate the urgent need for intensified entomological surveillance in all areas at risk for An. stephensi mosquito invasion, to clarify its occurrence and distribution and develop tailored approaches to prevent further spread.

Assessment of an automated Cytomegalovirus nucleic acid amplification test using clinical plasma, bronchoalveolar lavage, and tissue specimens.

BACKGROUND: Cytomegalovirus (CMV) causes significant morbidity and mortality in immunocompromised patients, particularly transplant recipients. Quantitation of CMV DNA in peripheral blood is used to monitor prophylactic and pre-emptive approaches to prevent CMV disease, whereas CMV DNA testing of non-plasma specimens may aid in the diagnosis of end-organ disease. METHODS: The analytical performance of the FDA-approved Aptima CMV Quant Assay was evaluated using reference CMV (SeraCare) diluted in defibrinated human plasma, as well as negative bronchoalveolar lavage fluid and tissue. Agreement was determined using 100 clinical acid-citrate-dextrose (ACD) plasma specimens, 77 bronchoalveolar lavage (BAL) fluids, and 101 tissues previously tested using artus CMV qPCR. RESULTS: Aptima CMV lower limit of detection (LLOD) was 169 IU/mL for ACD plasma, 100 IU/mL for BAL, and 50 IU/mL for tissue. Positive percent agreement (PPA) was 100.0% (50/50; 95% CI: 92.9% - 100.0%) and negative percent agreement (NPA) was 94.0% (47/50; 95% CI: 83.5% - 98.8%) for ACD plasma. Bland-Altman analysis revealed a bias of 0.20 log10 IU/mL (Aptima - artus) with 95% limits of agreement of -0.53 to 0.93. For BAL fluids, PPA was 70.0% (14/20; 95% CI: 45.7% - 88.1%) and NPA was 82.4% (43/51; 95% CI: 69.1% - 91.6%). For tissues, PPA was 90.0% (45/50; 95% CI: 78.2% - 96.7%) and NPA was 94.0% (47/50; 95% CI: 83.5% - 98.8%). CONCLUSIONS: The Aptima CMV Quant Assay demonstrates high analytical sensitivity and good overall agreement using clinical plasma and tissue specimens.

Consensus and controversies in the science of endophthalmitis management: Basic research and clinical perspectives.

Infectious endophthalmitis is a severe intraocular infection caused by bacteria, or less commonly by fungi. It can occur after penetrating eye procedures, trauma, or the spread of infection from contiguous structures or via emboli from distant organs. Because of the time-critical nature of the treatment, endophthalmitis is treated with the clinical diagnosis and modified by the microbiological report of the intraocular contents. The current strategy for managing endophthalmitis relies on pre-clinical literature, case series, and one large multi-center randomized clinical trial on post-cataract surgery endophthalmitis. Culture-susceptibility of the microorganisms from undiluted vitreous guides the definitive treatment in non-responsive cases. Strategies to reduce the incidence of endophthalmitis after penetrating eye procedures have been developed concurrently with refined means of treatment. Despite these advances, outcomes remain poor for many patients. Although consensus articles have been published on managing endophthalmitis, treatment patterns vary, and controversies remain. These include (1) the use of newer methods for early and precise microbiological diagnosis; (2) the choice of intravitreal antibiotics; (3) the need for systemic therapy; (4) early and complete vitrectomy. Here, we review the current consensus and address controversies in diagnosing and managing endophthalmitis. This review is intended to familiarize physicians and ophthalmologists with different aspects of endophthalmitis management to make informed decisions.