RESUMEN
Eco-friendly natural pigment demand has ever-increasing popularity due to health and environmental concerns. In this context, the aim of this study was to evaluate the feasibility use of Saba banana peel as low-cost fermentable substrate for the production of pigments, xylanase and cellulase enzymes by Monascus purpureus. Among the strains tested, M. purpureus TISTR 3385 produced pigments better and had higher enzyme activities. Under the optimal pigment-producing conditions at the initial moisture content of 40% and initial pH of 6.0, the pigments comprising yellow, orange, and red produced by the fungi were achieved in the range of 0.40-0.93 UA/g/day. The maximum xylanase and cellulase activities of 8.92 ± 0.46 U/g and 4.72 ± 0.04 U/g were also obtained, respectively. More importantly, solid-state fermentation of non-sterile peel could be achieved without sacrificing the production of the pigments and both enzymes. These indicated the potential use of the peel as fermentable feedstock for pigment production by the fungi and an environmental-friendly approach for sustainable waste management and industrial pigment and enzyme application.
Asunto(s)
Celulasas , Monascus , Musa , Fermentación , Pigmentos BiológicosRESUMEN
Abstract Solvent extraction of red pigments from fermented solids is reported. The pigments were produced by solid-state fermentation of oil palm frond (OPF) biomass with the food-safe fungus Monascus purpureus FTC 5357. The effects of extraction solvent and other operational conditions (pH, temperature, agitation rate, contact time) on the recovery of pigments are discussed. The recovery was maximized using aqueous ethanol (60% ethanol by vol) as solvent at pH 6, 30 °C, with an extraction time of 16 h and an agitation rate of 180 rpm. A fermented solids dry mass of 1 g was used for each 160 mL of solvent during extraction. The kinetics of extraction were assessed by fitting the experimental data to different models. Peleg's model proved to be the best for describing solid-liquid extraction of the pigments under the above specified conditions. The highest extraction yield of red pigments under the above specified optimal conditions was 207(6.08 AU g(1 dry fermented solids.
Asunto(s)
Monascus , Colorantes , Fermentación , CinéticaRESUMEN
Angkak (red mold rice, red yeast rice, Chinese red rice) is a traditional Chinese medicine produced by solid-state fermentation of cooked non-glutinous rice with Monascus species. The secondary metabolite of Monascus species, monacolin K /lovastatin, has been proven to lower blood lipid levels. In this study, a co-culture of Monascus purpureus MTCC 369 and Monascus ruber MTCC 1880 was used for angkak production. Four medium parameters screened by Plackett-Burman design were optimized by response surface methodology for highest lovastatin production in angkak during solid-state fermentation by the co-culture. Maximum lovastatin production of 2.84 mg g-1 was predicted in solid medium containing 20 g rice and 40 ml liquid nutrients medium (malt extract 9.68 g l-1, dextrose 38.90 g l-1, MnSO4.H2O 1.96 g l-1, and MgSO4.7H2O 0.730 g l-1) by point prediction tool of Design Expert 7.1 software (Statease Inc. USA).
Asunto(s)
Fermentación , Metabolismo de los Lípidos , Lovastatina , Lípidos/sangre , Monascus/metabolismo , Técnicas de Cocultivo , Activación Enzimática , Muestras de Alimentos , MétodosRESUMEN
Angkak (red mold rice, red yeast rice, Chinese red rice) is a traditional Chinese medicine produced by solid-state fermentation of cooked non-glutinous rice with Monascus species. The secondary metabolite of Monascus species, monacolin K /lovastatin, has been proven to lower blood lipid levels. In this study, a co-culture of Monascus purpureus MTCC 369 and Monascus ruber MTCC 1880 was used for angkak production. Four medium parameters screened by Plackett-Burman design were optimized by response surface methodology for highest lovastatin production in angkak during solid-state fermentation by the co-culture. Maximum lovastatin production of 2.84 mg g-1 was predicted in solid medium containing 20 g rice and 40 ml liquid nutrients medium (malt extract 9.68 g l-1, dextrose 38.90 g l-1, MnSO4.H2O 1.96 g l-1, and MgSO4.7H2O 0.730 g l-1) by point prediction tool of Design Expert 7.1 software (Statease Inc. USA).
RESUMEN
Angkak (red mold rice, red yeast rice, Chinese red rice) is a traditional Chinese medicine produced by solid-state fermentation of cooked non-glutinous rice with Monascus species. The secondary metabolite of Monascus species, monacolin K /lovastatin, has been proven to lower blood lipid levels. In this study, a co-culture of Monascus purpureus MTCC 369 and Monascus ruber MTCC 1880 was used for angkak production. Four medium parameters screened by Plackett-Burman design were optimized by response surface methodology for highest lovastatin production in angkak during solid-state fermentation by the co-culture. Maximum lovastatin production of 2.84 mg g(-1) was predicted in solid medium containing 20 g rice and 40 ml liquid nutrients medium (malt extract 9.68 g l(-1), dextrose 38.90 g l(-1), MnSO4.H2O 1.96 g l(-1), and MgSO4.7H2O 0.730 g l(-1)) by point prediction tool of Design Expert 7.1 software (Statease Inc. USA).
RESUMEN
Angkak (red mold rice, red yeast rice, Chinese red rice) is a traditional Chinese medicine produced by solid-state fermentation of cooked non-glutinous rice with Monascus species. The secondary metabolite of Monascus species, monacolin K /lovastatin, has been proven to lower blood lipid levels. In this study, a co-culture of Monascus purpureus MTCC 369 and Monascus ruber MTCC 1880 was used for angkak production. Four medium parameters screened by Plackett-Burman design were optimized by response surface methodology for highest lovastatin production in angkak during solid-state fermentation by the co-culture. Maximum lovastatin production of 2.84 mg g-1 was predicted in solid medium containing 20 g rice and 40 ml liquid nutrients medium (malt extract 9.68 g l-1, dextrose 38.90 g l-1, MnSO4.H2O 1.96 g l-1, and MgSO4.7H2O 0.730 g l-1) by point prediction tool of Design Expert 7.1 software (Statease Inc. USA).