Effects of multi-walled carbon nanotubes on gene and microRNA expression in human hepatocarcinoma HepG2 cells.

The usage of multi-walled carbon nanotubes (MWCNT) has increased exponentially in the past years, but, potential toxicity mechanisms are not clear. We studied the transcriptomic alterations induced by one multi-walled carbon nanotube (MWCNT) and its -OH and -COOH functionalized derivatives in human HepG2 cells. We showed that all three MWCNT treatments induced alterations in stress-related signaling pathways, inflammation-related signaling pathways, cholesterol synthesis pathways, proliferation-related pathways, senescence-related pathways and cancer-related pathways. In stress-related pathways, the acute phase response was induced in all three MWCNTs and all doses treated and ranked high. Other stress-related pathways were also related to the oxidative-induced signaling pathways, such as NRF-2 mediated oxidative stress response, hepatic fibrosis/Stella cell activation, iNOS signaling, and Hif1α signaling. Many inflammation-related pathways were altered, such as IL-8, IL-6, TNFR1, TNFR2, and NF-κB signaling pathways. These results were consistent with our previous results with exposures to the same three multi-walled carbon nanotubes in human lung BEAS-2B and also with results in mice and rats. From the microRNA target filter analysis, TXNIP & miR-128-3p interaction was present in all three MWCNT treatments, and maybe important for the induction of oxidative stress. CXCL-8 & miR-146-5p and Wee1 & miR-128-3p were only present in the cells treated with the parent and the OH-functionalized MWCNTs. These mRNA-miRNA interactions were involved in oxidative stress, inflammation, cell cycle, cholesterol biosynthesis and cancer related pathways. Target filter analysis also showed altered liver hyperplasia/hyperproliferation and hepatic cancer pathways. In short, target filter analysis complemented the transcriptomic analysis and pointed to specific gene/microRNA interactions that can help inform mechanism of action. Moreover, our study showed that the signaling pathways altered in HepG2 cells correlated well with the toxicity and carcinogenicity observed in vivo, indicating that HepG2 may be a good in vitro predictive model for MWCNT toxicity studies.

Mo-Doped Ni/C Catalyst for Improved Simultaneous Production of Hydrogen and Carbon Nanotubes through Ethanol Decomposition.

A Mo-Ni/C catalyst was developed and assessed in terms of the decomposition of ethanol to produce multi-wall carbon nanotubes (MWCNTs) and hydrogen. The catalyst utilized different molar ratios of Mo:Ni (1:9, 2:8, and 3:7), with Mo acting as a dopant to enhance the MWCNT yield and Ni acting as the primary active phase for MWCNT formation. Among the tested ratios, the 2:8 Mo:Ni ratio exhibited the optimal performance, yielding 86% hydrogen and high-quality MWCNTs. In addition to hydrogen, the process also generated CO, CH4, and CO2. Gas chromatography (GC) was employed to analyze the influence of the Mo:Ni ratio on gas production and selectivity, while the quality of the resulting MWCNTs was evaluated using SEM, Raman spectroscopy, and TEM analyses.

Enhancing Flexural Behavior of Reinforced Concrete Beams Strengthened with Basalt Fiber-Reinforced Polymer Sheets Using Carbon Nanotube-Modified Epoxy.

The external bonding (EB) of fiber-reinforced polymer (FRP) is a usual flexural reinforcement method. When using the technique, premature debonding failure still remains a factor of concern. The effect of incorporating multi-wall carbon nanotubes (MWCNTs) in epoxy resin on the flexural behavior of reinforced concrete (RC) beams strengthened with basalt fiber-reinforced polymer (BFRP) sheets was investigated through four-point bending beam tests. Experimental results indicated that the flexural behavior was significantly improved by the MWCNT-modified epoxy. The BFRP sheets bonded by the MWCNT-modified epoxy more effectively mitigated the debonding failure of BFRP sheets and constrained crack development as well as enhanced the ductility and flexural stiffness of strengthened beams. When the beam was reinforced with two-layer BFRP sheets, the yielding load, ultimate load, ultimate deflection, post-yielded flexural stiffness, energy absorption capacity and deflection ductility of beams strengthened using MWCNT-modified epoxy increased by 7.4%, 8.3%, 18.2%, 22.6%, 29.1% and 14.3%, respectively, in comparison to the beam strengthened using pure epoxy. It could be seen in scanning electron microscopy (SEM) images that the MWCNTs could penetrate into concrete and their pull-out and crack bridging consumed more energy, which remarkably enhanced the flexural behavior of the strengthened beams. Finally, an analytical model was proposed for calculating characteristic loads and characteristic deflections of RC beams strengthened with FRP sheets, which indicated a reasonably good correlation with the experimental results.

Improvement of the Piezoresistive Behavior of Poly (vinylidene fluoride)/Carbon Nanotube Composites by the Addition of Inorganic Semiconductor Nanoparticles.

Conductive polymer composites (CPCs), obtained by incorporating conductive fillers into a polymer matrix, are suitable for producing strain sensors for structural health monitoring (SHM) in infrastructure. Here, the effect of the addition of inorganic semiconductor nanoparticles (INPs) to a poly (vinylidene fluoride) (PVDF) composite filled with multi-walled carbon nanotubes (MWCNTs) on the piezoresistive behavior is investigated. INPs with different morphologies and sizes are synthesized by a hydrothermal method. The added inorganic oxide semiconductors showed two distinct morphologies, including different phases. While particles with flower-like plate morphology contain phases of orth-ZnSnO3 and SnO, the cauliflower-like nanoparticles contain these metal oxides and ZnO. The nanoparticles are characterized by field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD), and the nanocomposites by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Cyclic tensile testing is applied to determine the strain-sensing behavior of PVDF/1 wt% MWCNT nanocomposites with 0-10 wt% inorganic nanoparticles. Compared to the PVDF/1 wt% MWCNT nanocomposite, the piezoresistive sensitivity is higher after the addition of both types of nanoparticles and increases with their amount. Thereby, nanoparticles with flower-like plate structures improve strain sensing behavior slightly more than nanoparticles with cauliflower-like structures. The thermogravimetric analysis results showed that the morphology of the semiconductor nanoparticles added to the PVDF/MWCNT matrix influences the changes in thermal properties.

Au/PANI@PtCu-based electrochemical immunosensor for ultrasensitive determination of pro-gastrin-releasing peptide.

An ultrasensitive sandwich-type electrochemical immunosensor for pro-gastrin-releasing peptide (ProGRP) detection was constructed based on PtCu nanodendrites functionalized Au/polyaniline nanospheres (Au/PANI@PtCu). The prepared Au/PANI@PtCu nanocomposites not only possessed excellent electro-catalytic activity of H2O2 reduction due to the synergistic effect between the Au/PANI and PtCu NDs but also provided large specific surface area for detection of antibodies (Ab2) immobilization. In addition, Au nanoparticles encapsulated multi-wall carbon nanotubes (AuNPs@MWCNTs) were also applied to modify the glassy carbon electrode interface for loading numerous capture antibodies (Ab1). In the presence of target ProGRP, a sandwich-type electrochemical immunosensor showed a strong current response from the electro-catalysis of Au/PANI@PtCu toward H2O2 reduction. Benefiting from the exceptional electro-catalytic performance of Au/PANI@PtCu and the high conductivity of AuNPs@MWCNTs, the sandwich-type immunoassay exhibited remarkable sensitivity in detection. The linear range extended from 100 fg/mL to 10 ng/mL, while achieving an impressively low limit of detection of 77.62 fg/mL.

The Interface Strengthening of Multi-Walled Carbon Nanotubes/Polylactic Acid Composites via the In-Loop Hybrid Manufacturing Method.

In this study, a new in-loop hybrid manufacturing method is proposed for fabricating multi-walled carbon nanotube (MWCNTs)/polylactic acid (PLA) composites. Molecular dynamics simulations were conducted in conjunction with experiments to reveal the mechanism of the proposed method for improving the interfacial performance of MWCNTs/PLA. The superposed gradients in the PLA chain activity and conformation due to the plasma-actuating MWCNTs promoted intermolecular interaction and infiltration between the MWCNTs and PLA chains, forming an MWCNTs-stress-transfer bridge in the direction perpendicular to the interlayer interface, and finally enhancing the performance of the composites. The experimental results indicated that the interfacial shear strength of the specimen fabricated using the proposed method increased by 30.50% to 43.26 MPa compared to those without the addition of MWCNTs, and this value was 4.77 times higher than that of the traditional manufacturing method, demonstrating the effectiveness of the proposed method in improving the interfacial properties of MWCNTs/PLA composites.

[QuEChERS-liquid chromatography-tandem mass spectrometry for determination of 22 triazole pesticide residues in Chinese herbal medicines].

Eight well-known herbals in Zhejiang Province, Zhebawei, are commonly used as traditional Chinese herbal medicines owing to their rich active ingredients. However, the unavoidable use of pesticides during agricultural production has led to pesticide residue problems in these herbs. In this study, a simple, rapid, and accurate method was established to determine 22 triazole pesticide residues in Zhebawei. An improved QuEChERS method was used for sample pretreatment, and Rhizoma Atractylodis Macrocephalae was used as a representative sample. The sample was extracted with acetonitrile to eliminate some polar and nonpolar compounds, pigments, and other impurities, and the purification effects of multiwalled carbon nanotubes (MWCNTs), amino-modified multiwalled carbon nanotubes (MWCNTs-NH2), carboxylated multiwalled carbon nanotubes (MWCNTs-COOH), crosslinked polyvinylpyrrolidone (PVPP), zirconium dioxide (ZrO2), 3-(N,N-diethylamino)-propyltrimethoxysilane (PSA), octadecyl (C18), and graphitized carbon black (GCB) were compared. MWCNTs-COOH and C18 were selected as the purification adsorbents, and their dosages were systematically optimized. The combination of 10 mg of MWCNTs-COOH and 20 mg of C18 was eventually selected as the purification adsorbents. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for analysis, and box graphs were plotted to present the dispersion of each group of recoveries, thus enabling the identification of the data outliers, dispersion distribution, and data symmetry. The established method was systematically verified and showed good linearity over the concentration range of 1-200 µg/L (except for bromuconazole, epoxiconazole, and etaconazole) with correlation coefficients >0.99. The average recoveries of the 22 pesticides at spiked levels of 10, 20, 100, and 200 µg/kg were in the range of 77.0%-115% with relative standard deviations (RSDs) <9.4%. The limits of detection and quantification were 1-2.5 µg/kg and 10-20 µg/kg, respectively. The applicability of the developed method to other herbals was investigated at 100 µg/kg, and the average recoveries of the target pesticides in different matrices ranged from 76.4% to 123% with RSDs <12.2%. Finally, the method established was used to detect triazole pesticide residues in 30 actual Zhebawei samples. The results showed that triazole pesticides were present in Bulbus Fritillariae Thunbergii and Dendranthema Morifolium. Difenoconazole was detected in Bulbus Fritillariae Thunbergii at contents ranging from 41.4 µg/kg to 110 µg/kg, while difenoconazole, myclobutanil, triadimenol and propiconazole were detected in Dendranthema Morifolium at contents ranging from 16.1 µg/kg to 250 µg/kg. The established method can meet the requirements for the accurate quantitative analysis of triazole fungicides in Zhebawei.

Carboxymethyl cellulose@multi wall carbon nanotubes functionalized with Ugi reaction as a new curcumin carrier.

In recent years, the fabrication of new drug delivery systems (DDSs) based on functionalization by multi-component reactions (MCRs) has received special attention. In this regard, to obtain a new oral administration system for colon-specific cancer treatment, the CMC@MWCNTs@FCA carrier was designed and prepared from the functionalization of the CMC@MWCNTs as a biocompatible raw material with carboxamide group by the Ugi reaction. FT-IR analysis confirmed the successful synthesis of the product through the change in the functional groups of reagents. Additionally, the crystalline structure and porosity of the samples were studied by XRD and BET techniques. After a detailed characterization, the curcumin (CUR) was loaded on CMC@MWCNTs and CMC@MWCNTs@FCA, respectively, about 29 % and 38 %. In vitro drug release behavior studies for CUR-loaded CMC@MWCNTs@FCA showed the controlled release for it, so 11.6 % and 76.5 % of CUR, respectively were released at pH 1.2 and pH 7.4. Toxicological analysis displayed the IC50 of CMC@MWCNTs@FCA@CUR is 752 µg/mL. In conclusion, the obtained findings display that the fabricated system can be proposed as a biocompatible carrier for specific colon cancer treatment.

Role of Defects of Carbon Nanomaterials in the Detection of Ovarian Cancer Cells in Label-Free Electrochemical Immunosensors.

Developing label-free immunosensors to detect ovarian cancer (OC) by cancer antigen (CA125) is essential to improving diagnosis and protecting women from life-threatening diseases. Four types of carbon nanomaterials, such as multi-wall carbon nanotubes (MWCNTs), vapor-grown carbon fiber (VGCFs), graphite KS4, and carbon black super P (SP), have been treated with acids to prepare a carbon nanomaterial/gold (Au) nanocomposite. The AuNPs@carbon nanocomposite was electrochemically deposited on a glassy carbon electrode (GCE) to serve as a substrate to fabricate a label-free immunosensor for the detection of CA125. Among the four AuNPs@carbon composite, the AuNPs@MWCNTs-based sensor exhibited a high sensitivity of 0.001 µg/mL for the biomarker CA125 through the square wave voltammetry (SWV) technique. The high conductivity and surface area of MWCNTs supported the immobilization of AuNPs. Moreover, the carboxylic (COO-) functional groups in MWCNT improved to a higher quantity after the acid treatment, which served as an excellent support for the fabrication of electrochemical biosensors. The present method aims to explore an environmentally friendly synthesis of a layer-by-layer (LBL) assembly of AuNPs@carbon nanomaterials electrochemical immunoassay to CA125 in a clinical diagnosis at a low cost and proved feasible for point-of-care diagnosis.

3D Composite PDMS/MWCNTs Aerogel as High-Performing Anodes in Microbial Fuel Cells.

Porous 3D composite materials are interesting anode electrodes for single chamber microbial fuel cells (SCMFCs) since they exploit a surface layer that is able to achieve the correct biocompatibility for the proliferation of electroactive bacteria and have an inner charge transfer element that favors electron transfer and improves the electrochemical activity of microorganisms. The crucial step is to fine-tune the continuous porosity inside the anode electrode, thus enhancing the bacterial growth, adhesion, and proliferation, and the substrate's transport and waste products removal, avoiding pore clogging. To this purpose, a novel approach to synthetize a 3D composite aerogel is proposed in the present work. A 3D composite aerogel, based on polydimethylsiloxane (PDMS) and multi-wall carbon nanotubes (MWCNTs) as a conductive filler, was obtained by pouring this mixture over the commercial sugar, used as removable template to induce and tune the hierarchical continuous porosity into final nanostructures. In this scenario, the granularity of the sugar directly affects the porosities distribution inside the 3D composite aerogel, as confirmed by the morphological characterizations implemented. We demonstrated the capability to realize a high-performance bioelectrode, which showed a 3D porous structure characterized by a high surface area typical of aerogel materials, the required biocompatibility for bacterial proliferations, and an improved electron pathway inside it. Indeed, SCMFCs with 3D composite aerogel achieved current densities of (691.7 ± 9.5) mA m-2, three orders of magnitude higher than commercial carbon paper, (287.8 ± 16.1) mA m-2.

Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection.

An electrochemical approach is presented based on multiwall carbon nanotubes (MWCNTs) and neodymium(III) hydroxide (Nd(OH)3) nanoflakes for detection of bovine serum albumin (BSA). The materials were characterized morphologically (XRPD, SEM, and HR-TEM) and electrochemically (DPV, EIS). The MWCNTs@Nd(OH)3 composite was used as support for bovine serum albumin polyclonal antibody (anti-BSA). After the antibody immobilization on the electrochemical platform and antigen/antibody binding time (optimum 60 min), the proposed approach shows a linear voltammetric response toward BSA concentration in the range 0.066 to 6.010 ng mL-1 at maximum peak potential of 0.13 V (vs. Ag/AgCl). Limit of detection (LOD) and limit of quantification (LOQ) were 18 pg mL-1 and 61 pg mL-1, respectively. The precision of the method calculated as relative standard deviation (RSD) of five independent measurements was better 3%. The selectivity of the optimized method regarding structurally similar proteins (human serum albumin and human hemoglobin), ions (Na+, K+, Ca2+, and NO2-), or compounds (glucose, ascorbic acid, dopamine, uric acid, paracetamol, and glycine) was found to be satisfactory, with the current changes of less than 5% in the presence of up to 1 × 105 times higher concentrations (depending on the compound) of the listed potential interfering compounds. Practical applicability of immunosensor for BSA determination in cow whey sample, with recovery values in the range 97 to 103%, shows that the developed method has high potential for precise and accurate detection of BSA, as well as exceptional miniaturization possibilities for on-site and equipment-free sensing.

Sulfide-Doped Magnetic Carbon Nanotubes Developed as Adsorbent for Uptake of Tetracycline and Cefixime from Wastewater.

In this study, a magnetic solid-phase extraction method was developed based on multi-wall carbon nanotubes decorated by magnetic nanoparticles (Fe3O4) and cadmium sulfide nanoparticles (Fe3O4@MWCNT-CdS) for trace extraction of cefixime and tetracycline antibiotics from urine and drug company wastewater. The adsorbent features were characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), and energy dispersive X-ray analysis (EDX). Various effective parameters on the sorption and desorption cycle, such as sorption time, the mass of adsorbent, pH, salt addition, and material ratio, were investigated and optimized. The data were evaluated using isotherm models, and experimental data were well-fitted to both Langmuir (R2 = 0.975) and Freundlich (R2 = 0.985) models. Moreover, kinetic of reaction was agreement with pseudo-second-order (R2 = 0.999) as compared pseudo-first-order (R2 = 0.760). The maximum adsorption capacity for tetracycline and cefixime was achieved at 116.27 and 105.26 mg·g-1, respectively. Hence, the prepared adsorbent can be used as an alternative material for enhanced determination of pharmaceutical substances in biological fluids.

ACE2 and SARS-CoV-2-Main Protease Capillary Columns for Affinity Chromatography: Testimony of the Binding of Dexamethasone and its Carbon Nanotube Nanovector.

In this paper, each of the two following proteins, the angiotensin-converting enzyme 2 (ACE2) and the Main protease (Main pro) of the Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) were grafted for the first time on homemade neutravidin poly(GMA-co-EDMA) capillary columns for the research of their ligands. The effect of the column diameter on the quantity of immobilized biotinylated protein was studied. For a capillary length of 40 mm, when its internal diameter varied from 75 to 25 µm, the grafted quantity of ACE2 decreased by 85% (from 1.50 to 0.24 µg). Among all the studied ligands, a particular vigilance has been given for dexamethasone, a widely used molecule today for adult patients hospitalized with SARS-CoV-2. Competition experiments were performed with SARS-CoV-2 Receptor Binding Domain used as reference molecule with the ACE2 affinity column to assess the orthosteric binding site of dexamethasone (Dex) on ACE2. This ligand was then immobilized on Multiwall Carbon Nanotubes (Dex/MWCNT). By comparison of the normalized breakthrough curves measured for Dex and Dex/MWCNT on both the ACE2 and Main pro affinity columns, it was showed for the first time that nanovectorisation of Dex with MWCNT enhanced and stabilized its binding to both ACE2 and Main pro. This last result reinforced the use of Dex and the interest of MWCNT for boosting immune health against COVID 19.

Crosstalk between gut microbiota and lung inflammation in murine toxicity models of respiratory exposure or co-exposure to carbon nanotube particles and cigarette smoke extract.

Carbon nanotubes (CNTs) are emerging environmental and occupational toxicants known to induce lung immunotoxicity. While the underlying mechanisms are evolving, it is yet unknown whether inhaled CNTs would cause abnormalities in gut microbiota (dysbiosis), and if such microbiota alteration plays a role in the modulation of CNT-induced lung immunotoxicity. It is also unknown whether co-exposure to tobacco smoke will modulate CNT effects. We compared the effects of lung exposure to multi-wall CNT, cigarette smoke extract (CSE), and their combination (CNT + CSE) in a 4-week chronic toxicity mouse model. The exposures induced differential perturbations in gut microbiome as evidenced by altered microbial α- and ß- diversity, indicating a lung-to-gut communication. The gut dysbiosis due to CNTs, unlike CSE, was characterized by an increase in Firmicutes/Bacteroidetes ratio typically associated with proinflammatory condition. Notably, while all three exposures reduced Proteobacteria, the CNT exposure and co-exposure induced appearance of Tenericutes and Cyanobacteria, respectively, implicating them as potential biomarkers of exposure. CNTs differentially induced certain lung proinflammatory mediators (TNF-α, IL-1ß, CCL2, CXCL5) whereas CNTs and CSE commonly induced other mediators (CXCL1 and TGF-ß). The co-exposure showed either a component-dominant effect or a summative effect for both dysbiosis and lung inflammation. Depletion of gut microbiota attenuated both the differentially-induced and commonly-induced (TGF-ß) lung inflammatory mediators as well as granulomas indicating gut-to-lung communication and a modulatory role of gut dysbiosis. Taken together, the results demonstrated gut dysbiosis as a systemic effect of inhaled CNTs and provided the first evidence of a bidirectional gut-lung crosstalk modulating CNT lung immunotoxicity.

Simultaneously speciation and determination of manganese (II) and (VII) ions in water, food, and vegetable samples based on immobilization of N-acetylcysteine on multi-walled carbon nanotubes.

A novel method based on the immobilization of N-acetylcysteine on chloro-functionalized multi-walled carbon nanotubes (MWCNTs@NAC) was used for the speciation of manganese ions [Mn (II) and Mn(VII)] in water samples. Also, the total manganese (TMn) in vegetables and food samples was determined by the AT-FAAS. By ultrasound-assisted-dispersive ionic liquid trap micro solid-phase extraction (UA-DILT-µ-SPE), the Mn (II)/Mn(VII) ions were extracted in the presence of MWCNTs@NAC for 50 mL of water samples at a pH of 6.5 and 3.0, respectively. The adsorption capacity of MWCNTs@NAC for Mn(II) and Mn(VII) ions was obtained at 146.7 mg g-1 and 138.8 mg g-1, respectively. Under the optimized conditions, the detection limits (LOD), linear range (LR), and enrichment factor (EF) for Mn(II) and Mn(VII) ions were obtained (0.12 µg L-1; 0.14 µg L-1), (0.48-36 µg L-1; 0.55-38.1 µg L-1) and (100.2; 94.5), respectively. The proposed methodology was successfully validated by the CRM samples.

Spatially hierarchical nano-architecture for real time detection of Interleukin-8 cancer biomarker.

In the present work we have developed two hierarchical nano-architectures based electrochemical immunosensors for the detection of interleukin-8 (IL-8) cytokine tumor biomarker. A comparative study has been performed for spatial nano-architectures and their relative sensing to establish the model for real time monitoring. With the first platform, the recognition layer consisted with immobilised IL-8 on aminothiol modified gold electrodes. In the second approach, the activated multi walled carbon nanotubes (MWCNT-COOH) were added in the functionalisation process by covalent attachment between the functionalities NH2 of aminothiol and the functionalities COOH of carbon nanotubes. The surface topology of the recognition layer has been characterised by atomic force spectroscopy (AFM) and contact angle (CA) measurements. The electrochemical response of the developed sensor was measured by electrochemical impedance spectroscopy (EIS). A side-by-side comparison showed that aminothiol/activated MWCNTs/anti-IL-8 based impedimetric immunosensor exhibits high reproducibility (The relative standard deviation (R.S.D) = 3.2%, n = 3) with high stability. The present sensor allows evaluating a lower detection limit of 0.1 pg mL-1 with a large dynamic sensitivity range from 1 pg mL-1to 1000 pg mL-1 covering the entire clinical therapeutic window. The developed MWCNTs based immunosensor has been calibrated by determining IL-8 in artificial plasma and showed a selective response to IL-8 even in the interfering environment of other cytokines such as Interleukin-1 (IL-1) and Interleukin-6 (IL-6).

Antibody-Conjugated Magnetic Beads for Sperm Sexing Using a Multi-Wall Carbon Nanotube Microfluidic Device.

This study proposes a microfluidic device used for X-/Y-sperm separation based on monoclonal antibody-conjugated magnetic beads, which become positively charged in the flow system. Y-sperms were selectively captured via a monoclonal antibody and transferred onto the microfluidic device and were discarded, so that X-sperms can be isolated and commercially exploited for fertilization demands of female cattle in dairy industry. Therefore, the research team used monoclonal antibody-conjugated magnetic beads to increase the force that causes the Y-sperm to be pulled out of the system, leaving only the X-sperm for further use. The experimental design was divided into the following: Model 1, the microfluid system for sorting positive magnetic beads, which yielded 100% separation; Model 2, the sorting of monoclonal antibody-conjugated magnetic beads in the fluid system, yielding 98.84% microcirculation; Model 3, the sorting of monoclonal antibody-conjugated magnetic beads with sperm in the microfluid system, yielding 80.12% microcirculation. Moreover, the fabrication microfluidic system had thin film electrodes created via UV lithography and MWCNTs electrode structure capable of erecting an electrode wall 1500 µm above the floor with a flow channel width of only 100 µm. The system was tested using a constant flow rate of 2 µL/min and X-/Y-sperm were separated using carbon nanotube electrodes at 2.5 V. The structure created with the use of vertical electrodes and monoclonal antibody-conjugated magnetic beads technique produced a higher effective rejection effect and was able to remove a large number of unwanted sperm from the system with 80.12% efficiency.

A TiO2@MWCNTs nanocomposite photoanode for solar-driven water splitting.

A TiO2@MWCNTs (multi-wall carbon nanotubes) nanocomposite photoanode is prepared for photoelectrochemical water splitting in this study. The physical and photoelectrochemical properties of the photoanode are characterized using field emission-scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and linear sweep voltammetry. The results show that the TiO2@MWCNTs nanocomposite has an optical bandgap of 2.5 eV, which is a significant improvement in visible-light absorption capability compared to TiO2 (3.14 eV). The cyclic voltammograms show that incorporating TiO2 with the MWCNTs leads to a decrease in the electrical double layer, thereby facilitating the electron transfer rate in the TiO2@MWCNTs electrode. Moreover, the current density of the photoelectrochemical electrode formed by TiO2@MWCNTs under solar irradiation is significantly higher than that prepared by TiO2 (vs Ag/AgCl). The low charge capacity of the TiO2@MWCNTs electrode-electrolyte interface hinders the recombination of the photogenerated electrons and holes, which contributes to the enhancement of the solar-to-hydrogen (STH) conversion efficiency. The average STH conversion efficiency of the TiO2@MWCNTs electrode under solar exposure from 6 AM to 5 PM is 11.1%, 8.88 times higher than that of a TiO2 electrode. The findings suggested TiO2@MWCNTs is a feasible nanomaterial to fabricate the photoanode using photoelectrochemical water splitting under solar irradiation.

Exploring the thermo-physical characteristic of novel multi-wall carbon nanotube-Therminol-55-based nanofluids for solar-thermal applications.

This work aims to develop a novel nanofluid using Therminol-55 (T-55) as heat transfer fluid and multi-wall carbon nanotubes (MWCNTs) as dispersants with various volume concentrations of 0.05, 0.1, 0.3, and 0.5% and assess its thermo-physical properties for solar-thermal applications. The pH values of nanofluid MWCNT/T-55 with various particle loading were too far-flung from the pH (I) value, which confirmed the good dispersion stability of nanofluid. The measured density shows tremendous deviation from predicted density with increasing MWCNT loading owing to the non-considering of microstructural parameters in Pak & Cho correlation predication. The highest augmentation in nanofluid thermal conductivity was 16.83% for 0.5 vol. % MWCNT at 60 °C. The maximum improvement in dynamic viscosity of nanofluid with 0.5 vol. % of MWCNT is found to be 44%, and this rise is reduced at higher temperatures. The thermal effectiveness of the nanofluids demonstrates that nanofluid with all volume fractions of MWCNTs was favorable at higher temperatures in the laminar region. Mouromtseff number ratio decreases with a rise in temperature and MWCNT volume concentration. It is concluded that the excellent thermo-physical properties and prolonged thermal stability of the MWCNT will be highly beneficial in improving the overall performance of various kinds of heat transfer fluids (HTFs) for process heating and solar-thermal applications.

Silicone Elastomer Composites Fabricated with MgO and MgO-Multi-Wall Carbon Nanotubes with Improved Thermal Conductivity.

The effect of multiwall carbon nanotubes (MWCNTs) and magnesium oxide (MgO) on the thermal conductivity of MWCNTs and MgO-reinforced silicone rubber was studied. The increment of thermal conductivity was found to be linear with respect to increased loading of MgO. In order to improve the thermal transportation of phonons 0.3 wt % and 0.5 wt % of MWCNTs were added as filler to MgO-reinforced silicone rubber. The MWCNTs were functionalized by hydrogen peroxide (H2O2) to activate organic groups onto the surface of MWCNTs. These functional groups improved the compatibility and adhesion and act as bridging agents between MWCNTs and silicone elastomer, resulting in the formation of active conductive pathways between MgO and MWCNTs in the silicone elastomer. The surface functionalization was confirmed with XRD and FTIR spectroscopy. Raman spectroscopy confirms the pristine structure of MWCNTs after oxidation with H2O2. The thermal conductivity is improved to 1 W/m·K with the addition of 20 vol% with 0.5 wt % of MWCNTs, which is an ~8-fold increment in comparison to neat elastomer. Improved thermal conductive properties of MgO-MWCNTs elastomer composite will be a potential replacement for conventional thermal interface materials.