RESUMEN
Lately, emulsions with low-fat and natural stabilizers are predominant. This study extracted the nano cellulose crystals (NCs) from Camellia Oleifera shells, and their gallic acid (GA) conjugates were synthesized by free-radical grafting. Pickering emulsions were prepared using NCs 1â¯%, 1.5â¯%, 2.5â¯%, and gallic acid conjugates NC-GA1, NC-GA2, and NC-GA3 as stabilizers. The obtained nano cellulose crystals exhibited 18-25â¯nm, -40.01⯱â¯2.45 size, and zeta potential, respectively. The contact angle of 83.4° was exhibited by NC-GA3 conjugates. The rheological, interfacial, and microstructural properties and stability of the Pickering emulsion were explored. NC-GA3 displayed the highest absorption content of 79.12â¯%. Interfacial tension was drastically reduced with increasing GA concentration in NC-GA conjugates. Rheological properties suggested that the low-fat NC-GA emulsions showed a viscoelastic behavior, increased viscosity, gel-like structure, and increased antioxidant properties. Moreover, NC-GA3 displayed reduced droplet size and improved emulsion temperature and storage stability (28â¯days) against phase separation. POV and TBARS values were reduced with the NC-GA3 (Pâ¯<â¯0.05). This work confirmed that grafting phenolic compounds on NCs could enhance bioactive properties, which can be used in developing low-fat functional foods. NC-GA conjugates can potentially fulfill the increasing demand for sustainable, healthy, and low-fat foods.
Asunto(s)
Antioxidantes , Camellia , Celulosa , Emulsiones , Ácido Gálico , Reología , Camellia/química , Ácido Gálico/química , Celulosa/química , Antioxidantes/química , Viscosidad , Nanopartículas/química , CristalizaciónRESUMEN
Studies were carried out to develop eco-friendly Packaging material for the extended shelf-life of food products. The current study sought to improve the coated bioactive film's hydrophobicity and antimicrobial properties by preparing active packaging based on biodegradable Poly Lactic Acid (PLA) containing 1 wt% Nanocellulose (NC) and various loadings of essential oil-prepared nanocomposites. Nanocellulose (NC) from Maize Cob was used as filler in the synthesis of nanopolymers enriched with Thyme oil, Cinnamon oil, clove oil, and Rosemary oil. Characterization of nanopolymer-coated bags and their effect on enhancing the shelf-life of food products in different temperature conditions was also studied. The fabricated nanocomposite and nanocellulose were characterized using FTIR, SEM, XRD, Contact angle, TGA, and Tensile mechanical properties. The fabricated nanocomposite-coated paper cum bag shows good hydrophobic properties as well as antimicrobial and insecticidal properties. The results showed that adding essential oils and dispersing nanocellulose to the PLA matrix strengthened its mechanical qualities as well as its efficacy for biodegradation and antimicrobial properties. The current work provides extremely promising materials for future applications in food packaging applications using sustainable nanocomposite-based biodegradable and antimicrobial coated paper cum bags.
Asunto(s)
Celulosa , Embalaje de Alimentos , Nanocompuestos , Zea mays , Embalaje de Alimentos/métodos , Celulosa/química , Zea mays/química , Nanocompuestos/química , Aceites Volátiles/química , Aceites Volátiles/farmacología , Interacciones Hidrofóbicas e Hidrofílicas , Almacenamiento de Alimentos/métodos , Antiinfecciosos/química , Antiinfecciosos/farmacología , PoliésteresRESUMEN
Micro- and nano-hybrid cellulose fiber (MNCF) stands out as a versatile cellulosic nanomaterial with promising applications in various fields owing to its excellent intrinsic nature and outstanding characteristics. However, the inefficiency in preparing MNCF, attributed to a complex multi-step processing, hinders its widespread adoption. In this study, a straightforward and highly efficient method for MNCF preparation was developed via a hot water soaking-assisted colloid grinding strategy. Active water molecules in hot water facilitating stronger transverse shrinkage and longitudinal expansion in fiber crystallized region, and thus improving the fibrillation degree of cellulose fibers. As a result, MNCFs with a mean diameter of 37.5 ± 22.2 nm and high concentration (2 wt%) were successfully achieved though pure mechanical method. The micro and nano-hybrid structure leads to the corresponding resulting cellulose paper with micro- and nano-hybrid structure possesses a compact stacking and fewer defects, leading to extraordinary mechanical properties including tensile strength of 204.5 MPa, Young's modulus of 6.3 GPa and elongation of 10.1 %. This work achieves significant progress towards straightforward and highly efficient production of MNCFs, offering an appreciable prospect for the development of multifunctional MNCF-based materials.
RESUMEN
Stimulus-responsive fluorescent-modified biopolymers have received significant attention in the field of chemosensors. Herein, four new fluorescent dyes, namely, S1: (PDA-DANC), S2: (SAL-PDA-DANC), S3: (BrSAL-PDA-DANC) and S4: (ClSAL-PDA-DANC) have been successfully synthesized from 2,3-dialdehyde nanocellulose (DANC) for the detection of heavy metals. The microstructural and photophysical properties of nanocellulose (NC), microcrystalline cellulose (DANC) and the synthesized S1 to S4 dyes were investigated by FT-IR, SEM-EDX, XRD, TGA, DLS and photoluminescence. NC, obtained from conversion of MCC, shows an average size of 802.4 nm with 0.141 of polydispersity index (PdI), and a crystalline index (CI) of 82.40 % and crystallite size of 4.68 nm. The synthesized dyes present good fluorescent properties and have been therefore exploited for developing new probes for heavy metal ions detection. Remarkable "turn off" and/or "turn on" behaviors with Fe3+ and Cu2+ and with Zn2+ in DMF/water solution have been demonstrated, allowing the sensitive and selective determination of these heavy metal ions with a low limit of detection (LOD). Finally, the evaluation of the Fe3+ sensing in a real seawater sample was investigated.
Asunto(s)
Cobre , Bases de Schiff , Cobre/química , Bases de Schiff/química , Espectroscopía Infrarroja por Transformada de Fourier , Metales , Colorantes Fluorescentes/química , Agua/química , Iones , Agua de Mar , Zinc/químicaRESUMEN
To address the high production cost associated with bacterial cellulose (BC) production using the Hestrin-Schramm (HS) medium, alternative agricultural wastes have been investigated as potential low-cost resources. This study aims to utilize pineapple core from pineapple canning industry waste as a carbon source to enhance the bacterial growth of Komagataeibacter xylinus and to characterize the physical and mechanical properties of the resulting BC. To assess growth performance, commercial sugar at concentrations of 0, 2.5, and 5.0 % (w/v) was incorporated into the medium. Fermentation was conducted under static conditions at room temperature for 5, 10, and 15 days. The structural and physical properties of BC were characterized using SEM, FTIR, XRD, and DSC. With the exception of crystallinity, BC produced from the pineapple core medium exhibited comparable characteristics to BC produced in the HS medium. These findings highlight the potential of utilizing pineapple core, a byproduct of the canning industry, as an economically viable nutrient source for BC production.
RESUMEN
Current research on hemostatic materials have focused on the inhibition of visible hemorrhage, however, invisible hemorrhage is the unavoidable internal bleeding that occurs after trauma or surgery, leading directly to a dramatic drop in hemoglobin and then to anemia and even death. In this study, bacterial nanocellulose (BNC) was synthesized and oxidized from the primary alcohols to carboxyl groups, and then grafted with tranexamic acid through amide bonds to construct degradable nanoscale short fibers (OBNC-TXA), which rapidly activated the coagulation response. The hemostatic material is made up of nanoscale short fibers that can be constructed into different forms such as emulsions, gels, powders, and sponges to meet different clinical applications. In the hemostatic experiments in vitro, the composites had significantly superior pro-coagulant properties due to the rapid aggregation of blood cells. In the coagulation experiments with rat tail amputation and liver trauma hemorrhage models, the group treated with OBNC-TXA1 sponge showed low hemorrhage and inhibited invisible hemorrhage in rectus abdominis muscle defect hemorrhage models, with a rapid recovery of hemoglobin values from 128±5.5 to 165±2.6 g L-1 within 4 days. In conclusion, the degradable short fibers constructed from bacterial nano-cellulose achieved inhibition of invisible hemorrhage in vivo.
Asunto(s)
Hemostáticos , Hepatopatías , Ácido Tranexámico , Ratas , Animales , Ácido Tranexámico/farmacología , Ácido Tranexámico/uso terapéutico , Hemorragia/tratamiento farmacológico , Hemostáticos/farmacología , Hemostáticos/uso terapéutico , Coagulación Sanguínea , Hemoglobinas/farmacología , Hemoglobinas/uso terapéuticoRESUMEN
Nano crystalline cellulose (NCC) created a breakthrough in biomedical field because of its important characteristics like large surface area, good mechanical strength, biocompatibility, renewability and feasibility of incorporation to both hydrophilic and hydrophobic substances. In the present study NCC based drug delivery systems (DDSs) of some non-steroidal anti-inflammatory drugs (NSAIDs) were obtained by covalent bonding between hydroxyl groups of NCC with carboxyl group of NSAIDs. Developed DDSs were characterized by means of FT-IR, XRD, SEM and thermal analysis. In-vitro release study and fluorescence study showed that these systems are stable up to 18 h in upper gastrointestinal (GI) tract at pH 1.2 and released NSAIDs in sustained manner over the period of 3 h in intestine at pH 6.8-7.4. Present study performed with the aim to reuse bio-waste even in the form of DDSs is of greater therapeutic efficacy with reduced dosing frequency that overcome physiological adversities involved with NSAIDs.
Asunto(s)
Celulosa , Sistemas de Liberación de Medicamentos , Celulosa/química , Espectroscopía Infrarroja por Transformada de Fourier , Antiinflamatorios no Esteroideos/químicaRESUMEN
Bio-polymeric based nano-composites and hydrogels are newsworthy nano-biomaterials. Herein, crystalline or fibrous nano-cellulose carboxylate (NCCC and NCCF) were selectively prepared via the controllable direct oxidative-hydrolysis of MC in alkaline NaClO2 at 1:2 mol ratio, 90 °C, and 24 h for NCCC and at 1:1 mol ratio, 70 °C, and 20 h for NCCF. Characterization of NCCC and NCCF were performed by comparative Fourier transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and energy dispersive X-ray spectroscopy (EDS). Then, NCCC was cross-linked to the recycled gelatin (Gel) from the medicine capsules and the as-prepared nano-ZnO by maleic anhydride (MA) to give the novel hydrogel Gel/MA/NCCC/nano-ZnO. Nano-ZnO plays multi-roles in this hydrogel preparation, as either catalyst for the esterification of cellulose hydroxyls and amidation of gelatin amino groups or as the anti-bacterial part of hydrogel. The in vitro anti-bacterial activity results against the three gram-negative and gram-positive bacteria by well diffusion method confirmed Gel/MA/NCCC/nano-ZnO as an antibacterial agent with the activity order of P. aeruginosa > S. aureus > E. coli. The top anti-bacterial activity of this hydrogel against the gram-negative resistant bacteria of P. aeruginosa suggests its potential for biomedical applications.
Asunto(s)
Hidrogeles , Óxido de Zinc , Hidrogeles/química , Gelatina , Óxido de Zinc/química , Celulosa , Espectroscopía Infrarroja por Transformada de Fourier , Staphylococcus aureus , Escherichia coli , Antibacterianos/farmacología , Antibacterianos/química , Bacterias , Bacterias Gramnegativas , Difracción de Rayos X , Pruebas de Sensibilidad MicrobianaRESUMEN
Oral vaccine is a non-invasive, ideal way to protect communities from infectious diseases. Effective vaccine delivery systems are required to enhance vaccine absorption in the small intestine and its cellular uptake by immune cells. Here, we constructed alginate/chitosan-coated cellulose nanocrystal (Alg-Chi-CNC) and nanofibril (Alg-Chi-CNF) nanocomposites to enhance ovalbumin (OVA) delivery in the intestine. In vitro mucosal permeation and diffusion and cellular uptake demonstrated that Chi-CNC exhibited better cellular uptake in epithelial and antigen-presenting cells (APCs). In vivo results revealed that alginate/chitosan-coated nanocellulose nanocomposites generated strong systemic and mucosal immune responses. Though the features of functional nano-cellulose composites affected mucus permeation and APC uptakes, in vivo specific-OVA immune responses have not shown significant differences due to the complexity of the small intestine.
Asunto(s)
Quitosano , Vacunas , Celulosa , Quitosano/química , Inmunidad Mucosa , Vacunas/química , Alginatos , VacunaciónRESUMEN
Incorporating a phase change material (PCM) into fibres allows the fabrication of smart textiles with thermo-regulating properties. Previously, such fibres have been made from thermoplastic polymers, usually petroleum-based and non-biodegradable, or from regenerated cellulose, such as viscose. Herein, strong fibres are developed from aqueous dispersions of nano-cellulose and dispersed microspheres with phase changing characteristics using a wet spinning technique employing a pH shift approach. Good distribution of the microspheres and proper compatibility with the cellulosic matrix was demonstrated by formulating the wax as a Pickering emulsion using cellulose nanocrystals (CNC) as stabilizing particles. The wax was subsequently incorporated into a dispersion of cellulose nanofibrils, the latter being responsible for the mechanical strength of the spun fibres. It was possible to produce fibres highly loaded with the microspheres (40 wt%) with a tenacity of 13 cN tex-1 (135 MPa). The fibres possessed good thermo-regulating features by absorbing and releasing heat without undergoing structural changes, while maintaining the PCM domain sizes intact. Finally, good washing fastness and PCM leak resistance were demonstrated, making the fibres suitable for thermo-regulative applications. Continuous fabrication of bio-based fibres with entrapped PCMs may find applications as reinforcements in composites or hybrid filaments.
RESUMEN
Present study describes about hybrid hemostat developed with alginate (Alg), chitosan (Chito) and TEMPO-oxidized nanofibrillar cellulose (TOCNF) via lyophilization. All samples were analyzed under scanning electron microscopy (SEM) to determine their microstructure, size, and distribution of pores. Cell viability and proliferation of the scaffolds tested using fibroblast type L929 cells, showed it to be an excellent medium for cell generation. Blood coagulation started in â¼7.5 min, and most of the fibrin network formation took place in the Alg-Chito-TOCNF sponge, making it a suitable hemostatic material.
Asunto(s)
Celulosa Oxidada , Quitosano , Hemostáticos , Quitosano/química , Hemostáticos/farmacología , Alginatos/química , Celulosa/química , Andamios del Tejido/químicaRESUMEN
The present study aims to disclose the activity of cationic cellulose nanocrystals (CNCs) as a promising multifunctional green nanomaterial with applications in biological aspects. The basic reason behind multifunctional behavior is zeta potential and size distribution of nano biopolymers; exhibit a remarkable physical and biological activity compared to normal molecules.The preliminary characterized studied using absorption spectral analysis showed strong absorption peak indicating that spectrum curves can be screen by UV spectra at wavelength range 200-400nm. Ultrastructural studies (SEM-EDS and TEM), manifest that CNCs are elliptical particles in shape. Also, TEM show CNCs are the ideal illustration of zero-dimensional (0-D) NPs, less than 5.1 nm in diameter with Cationic charge and similar results in size distribution by TEM. Nonetheless, developed as antioxidant activity IC50 was 1467 ± 25.9 µg/mL, antimicrobial activity tested G-ve strains, but not affected on tested G+ve strains and tested fungi. Evaluating toxicity effect of cationic CNCs against human blood erythrocytes (RBCs) and Lymphocyte Proliferation and the end point evaluate by comet assay, which proven no cytotoxic effect. Also, a high dose 500 µg/mL of CNCs highly significant (p < 0.05) reduction in cell viability of Caco-2 cancer cells after 24 h. incubation time, whereas the IC50 was 1884 ± 19.46 µg/mL. Moreover, genotoxic assay indicates Caco-2 cells cause apoptosis with no fragmentation in DNA. Undoubtedly, the obtained results brought about by the interaction of layers carrying opposing charges. Additionally, there is a balance between hydrophilic contact and electrostatic attraction. That emphasizes how the cationic CNCs have excellent potential for use as antioxidants, antimicrobials, and anticancer agents.
Asunto(s)
Celulosa , Nanopartículas , Humanos , Celulosa/farmacología , Celulosa/química , Células CACO-2 , Nanopartículas/química , Interacciones Hidrofóbicas e Hidrofílicas , ApoptosisRESUMEN
For the analytical determination of Fe(II) and Pd(II) concentrations, a novel optical sensor based on spectrophotometric technique was used. The optical sensor was prepared by direct immobilization of a novel synthesized chromophore, 5-amino-phenanthrolin-3 formyl salicylic acid, onto nanocellulose. Human vision can identify the color associated with Fe II ions, and spectrophotometric methods can measure it with detection and quantification limits of 0.239 and 0.796 ppb, respectively. Pd(II) detection and quantification limits were 0.318 ppb and 1.06 ppb, respectively. The effects of various parameters on the detection of Fe(II) or Pd(II) ion content were investigated and optimized. The optical phenanthroline-nanocellulose (5-Phen) sensor could be reproduced multiple times and used with a higher capacity each time. The results demonstrated that the 5-Phen sensor could measure Fe(II) in human blood serum accurately and successfully even without any pre-concentration.
Asunto(s)
Compuestos Ferrosos , Ácido Salicílico , Humanos , Espectrofotometría , IonesRESUMEN
In this work, Gold nanoparticles (AuNPs) encapsulated in the surface of crystalline nano cellulose grafted poly citric acid (CNC-g-PCA) and CNC-g-PCA/Au nanocomposite were synthesized successfully that exhibited stable and intense fluorescence property in aqueous buffer. A dual-mode nanosensor is reported with both colorimetric and fluorimetric readout based on citrate-protected AuNPs for discriminative detection of gluten proteins. The proposed sensing system consists of AuNPs and fluorescent CNCs, where CNCs function as a fluorimetric reporter and AuNPs serve a dual function as a colorimetric reporter and fluorescence quencher. The mechanism of the reported dual-mode nanosensor is based on two distance-dependent phenomena, the color change of AuNPs and FRET. The presence of gluten proteins can reverse the process by enlarging the inter-particle distance between AuNPs and CNCs and recovering the fluorescence emission of CNC. The linear range was 0.05 to 0.40 µgmL-1 for UV-vis spectroscopy and 0.017 to 0.298 µgmL-1 for fluorescence spectroscopy, The limit of detection was 4.43 ± 0.019 ngmL-1 for UV-vis spectroscopy and 3.13 ± 0.033 ngmL-1 for fluorescence spectroscopy (n = 6). The fabricated nanosensor was applied to the gluten analysis in gluten-free bread successfully.
Asunto(s)
Colorimetría , Nanopartículas del Metal , Oro , Celulosa , Glútenes , Pan , Ácido Cítrico , CinacalcetRESUMEN
Guided bone regeneration with osteoinductive scaffolds is a competitive edge of tissue engineering due to faster and more consistent healing. In the present study, we developed such composite beads with nanocellulose reinforced alginate hydrogel that carriedß-tricalcium phosphate (ß-TCP) nano-powder and liver-derived extracellular matrix (ECM) from porcine. Interestingly, it was observed that the beads' group containing ECM-ß-TCP-alginate-nanocellulose (ETAC) was more cytocompatible than the others comprised ofß-TCP-alginate-nanocellulose (TAC) and alginate-nanocellulose (AC). Cell attachment on ETAC beads was dramatically increased with time. In parallel within vitroresults, ETAC beads produced uniform cortical and cancellous bone in the femur defect model of rabbits within 2 months. Although the group TAC also produced noticeable bone in the defect site, the healing quality was improved and regeneration was faster after adding ECM. This conclusion was not only confirmed by micro-anatomical analysis but also demonstrated with x-ray microtomography. In addition, the characteristic moldable and injectable properties made ETAC a promising scaffold for clinical applications.
Asunto(s)
Alginatos , Fosfatos de Calcio , Animales , Regeneración Ósea , Matriz Extracelular , Hígado , Conejos , Porcinos , Ingeniería de Tejidos/métodos , Andamios del TejidoRESUMEN
Due to its unique properties, nano fibrillated cellulose (NFC) has been a popular topic of research in recent years. Nevertheless, literature assessing environmental impacts of NFC production is scarce, especially for using other starting materials than wood pulp. Hence, in this study, a new approach of cascaded use of manure to produce biogas and subsequently use the cellulose containing digestate for NFC production (manure scenario) is compared to the production from Kraft pulp from hardwood chips (wood chips scenario) via life cycle assessment (LCA). To produce comparable outputs (NFC and biogas) in both scenarios a typical Austrian biogas plant with maize silage and pig slurry as input material is included in the wood chips scenario. A proxy approach is used to upscale the manure scenario from laboratory to an industrial scale (except for the pulp to NFC step) to ensure comparability of both scenarios. The impact categories global warming potential (GWP), fossil resource scarcity, freshwater eutrophication, human toxicity, terrestrial acidification (TAP) and terrestrial ecotoxicity potential are analysed referring to the functional unit of 1 kg NFC. Results show that the manure scenario has at least 45% lower impacts in all assessed categories. GWP is 4.41 kg CO2 eq./kg NFC in the manure and 9.74 kg CO2 eq./kg NFC in the wood chips scenario. The transformation step from pulp to NFC is identified as environmental hotspot due to the high electricity demand in both scenarios. Results are additionally assessed only for the industrial scale part (includes biogas and pulp production). In the latter the main difference can be found in the substrate production. While it plays a subordinate role in the manure scenario (up to 8%) as manure is seen as a waste stream with no upstream environmental impacts attached, the production of maize silage is one of the hotspots in the industrial part in the wood chips scenario. This difference is especially prominent in TAP, where the substrate production is responsible for 91% of the 0.06 kg SO2 eq. impact, which is tenfold the impact of the manure scenario. This underlines the issue of using energy crops as substrate in biogas plants. It also highlights the importance of further research of using waste streams as inputs for the electricity production and subsequent use in the pulp and paper industry. This LCA demonstrates that NFC production from manure is a sustainable alternative to the production from hardwood Kraft pulp.
Asunto(s)
Biocombustibles , Estiércol , Animales , Dióxido de Carbono , Celulosa , Estadios del Ciclo de Vida , Porcinos , Zea maysRESUMEN
Both chitosan and zein are safe industrial biopolymers for the 21St century, respecting environmentally concerns. This review mainly is focused on preparations, properties and applications of a promising food packaging material, chitosan-zein nano-composite (NC). The properties and applications of the NCs were compared with their conventional counterparts. The structure of chitosan- zein composites was proposed. A procedure for preparations of conventional and nano zein-chitosan composites was proposed. The sizes of composites depend on molecular weight of chitosan and zein, the ratio of chitosan/zein, and pH of chitosan-zein solutions. The NCs had superior mechanical, antimicrobial, antioxidant, and barrier properties compared with the conventional ones. The properties of the composites were further improved by introduction of bioactive compounds, fillers or plasticizers. The composites have potential to employ as coatings/packaging materials to protect mushroom, meats, and fresh fruits and vegetables.
Asunto(s)
Quitosano , Embalaje de Alimentos , Nanocompuestos/química , Zeína , Antiinfecciosos/química , Quitosano/química , Concentración de Iones de Hidrógeno , Peso Molecular , Zeína/químicaRESUMEN
Excessive blood loss due to trauma or major surgical intervention can be life threatening which necessitates rapid hemorrhage management for the prevention of such bleeding related sufferings. Broad interest in developing new hemostatic technologies have been paid for bleeding control but none of them found completely satisfactory especially in terms of rapid clotting, absorbability, porosity, cost effectiveness and safety. To address these issues, a combination of active and passive hemostatic materials from biological sources could be a wise choice. Therefore, plant-derived TEMPO-oxidized nanocellulose (TOCN)/biopolymer gelatin (G) sponge was successfully prepared in co-operation with intrinsic blood coagulation enzyme thrombin (Th) via freeze drying method and their application as rapid hemostatic dressing was investigated. Morphological and in vitro characteristics of the samples were evaluated where uniformity, porosity, swelling, degradation behavior had direct relationship with the percent gelatin incorporation. In vitro hemocompatibility and cyto-compatibility of these sponges were confirmed as well. Among the samples, TOCN 2.5G-Th sponge exhibited excellent hemostatic effect, rapid absorbability, minimum clotting time (1.37 ± 0.152 min) and reduction of blood loss was ensured through rat liver punch biopsy model. The results demonstrated that, Th enhanced blood coagulation, platelet and red blood cell aggregation following application of biopolymer TOCN 2.5G-Th sponge compared with samples devoid of Th. In short, the functional, cost effective and nontoxic sponge developed via facile preparation could potentially be used as an absorbable biomaterial to achieve immediate hemostasis. HighlightsPlant-derived TEMPO-oxidized nanocellulose (TOCN) and biopolymer gelatin (G) was successfully used to prepare a hemostatic sponge in combination with intrinsic blood coagulation enzyme thrombin (Th).The TG sponge combines the advantages of TOCN and gelatin, exhibiting biocompatibility, biodegradability and superior blood-absorption performance.The TOCN 2.5G-Th sponge improves plasma absorption, red blood cell adhesion, aggregation, platelet adhesion and activation leading to enhanced hemostasis effect and shorter hemostasis time in vitro and in vivo.
Asunto(s)
Celulosa Oxidada , Hemostáticos , Nanofibras , Animales , Óxidos N-Cíclicos , Gelatina/farmacología , Hemorragia , Hemostasis , Hemostáticos/farmacología , Hígado , Ratas , Trombina/farmacologíaRESUMEN
Hydrogel is the most emblematic soft material which possesses significantly tunable and programmable characteristics. Polymer hydrogels possess significant advantages including, biocompatible, simple, reliable and low cost. Therefore, research on the development of hydrogel for biomedical applications has been grown intensely. However, hydrogel development is challenging and required significant effort before the application at an industrial scale. Therefore, the current work focused on evaluating recent trends and issues with hydrogel development for biomedical applications. In addition, the hydrogel's development methodology, physicochemical properties, and biomedical applications are evaluated and benchmarked against the reported literature. Later, biomedical applications of the nano-cellulose-based hydrogel are considered and critically discussed. Based on a detailed review, it has been found that the surface energy, intermolecular interactions, and interactions of hydrogel adhesion forces are major challenges that contribute to the development of hydrogel. In addition, compared to other hydrogels, nanocellulose hydrogels demonstrated higher potential for drug delivery, 3D cell culture, diagnostics, tissue engineering, tissue therapies and gene therapies. Overall, nanocellulose hydrogel has the potential for commercialization for different biomedical applications.
Asunto(s)
Materiales Biocompatibles , Hidrogeles , Celulosa , Sistemas de Liberación de Medicamentos , Ingeniería de TejidosRESUMEN
Treatment with exogenous additives during composting can help to alleviate the accumulation of antibiotic resistance genes (ARGs) caused by the direct application of pig manure to farmland. In addition, nano-cellulose has an excellent capacity for adsorbing pollutants. Thus, the effects of adding 300, 600, and 900 mg/kg nano-cellulose to compost on the bacterial communities, mobile genetic elements (MGEs), and ARGs were determined in this study. After composting, treatment with nano-cellulose significantly reduced the relative abundance of ARGs, which was lowest in the compost product with 600 mg/kg added nano-cellulose. Nano-cellulose inhibited the rebound in ARGs from the cooling period to the maturity period, and weakened the selective pressure of heavy metals on microorganisms by passivating bio-Cu. The results also showed that MGEs explained most of the changes in the abundances of ARGs, and MGEs had direct effects on ARGs. The addition of 600 mg/kg nano-cellulose reduced the abundances of bacterial genera associated with ermQ, tetG, and other genes, and the number of links (16) between ARGs and MGEs was lowest in the treatment with 600 mg/kg added nano-cellulose. Therefore, adding 600 mg/kg nano-cellulose reduced the abundances of ARGs by affecting host bacteria and MGEs. The results obtained in this study demonstrate the positive effect of nano-cellulose on ARG pollution in poultry manure, where adding 600 mg/kg nano-cellulose was most effective at reducing the abundances of ARGs.